Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:
 "Notable features are user-space support for the memcpy/memset
  instructions and the permission indirection extension.

   - Support for the Armv8.9 Permission Indirection Extensions. While
     this feature doesn't add new functionality, it enables future
     support for Guarded Control Stacks (GCS) and Permission Overlays

   - User-space support for the Armv8.8 memcpy/memset instructions

   - arm64 perf: support the HiSilicon SoC uncore PMU, Arm CMN sysfs
     identifier, support for the NXP i.MX9 SoC DDRC PMU, fixes and
     cleanups

   - Removal of superfluous ISBs on context switch (following
     retrospective architecture tightening)

   - Decode the ISS2 register during faults for additional information
     to help with debugging

   - KPTI clean-up/simplification of the trampoline exit code

   - Addressing several -Wmissing-prototype warnings

   - Kselftest improvements for signal handling and ptrace

   - Fix TPIDR2_EL0 restoring on sigreturn

   - Clean-up, robustness improvements of the module allocation code

   - More sysreg conversions to the automatic register/bitfields
     generation

   - CPU capabilities handling cleanup

   - Arm documentation updates: ACPI, ptdump"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (124 commits)
  kselftest/arm64: Add a test case for TPIDR2 restore
  arm64/signal: Restore TPIDR2 register rather than memory state
  arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
  Documentation/arm64: Add ptdump documentation
  arm64: hibernate: remove WARN_ON in save_processor_state
  kselftest/arm64: Log signal code and address for unexpected signals
  docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
  arm64/fpsimd: Exit streaming mode when flushing tasks
  docs: perf: Add new description for HiSilicon UC PMU
  drivers/perf: hisi: Add support for HiSilicon UC PMU driver
  drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
  perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
  perf/arm-cmn: Add sysfs identifier
  perf/arm-cmn: Revamp model detection
  perf/arm_dmc620: Add cpumask
  arm64: mm: fix VA-range sanity check
  arm64/mm: remove now-superfluous ISBs from TTBR writes
  Documentation/arm64: Update ACPI tables from BBR
  Documentation/arm64: Update references in arm-acpi
  Documentation/arm64: Update ARM and arch reference
  ...

120 files changed, 3429 insertions, 786 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index d8fabfe37d5e..c5e7bb4babf0 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -429,6 +429,9 @@
 	arm64.nosme	[ARM64] Unconditionally disable Scalable Matrix
 			Extension support
 
+	arm64.nomops	[ARM64] Unconditionally disable Memory Copy and Memory
+			Set instructions support
+
 	ataflop=	[HW,M68k]
 
 	atarimouse=	[HW,MOUSE] Atari Mouse
diff --git a/Documentation/admin-guide/perf/hisi-pmu.rst b/Documentation/admin-guide/perf/hisi-pmu.rst
index 546979360513..e0174d20809a 100644
--- a/Documentation/admin-guide/perf/hisi-pmu.rst
+++ b/Documentation/admin-guide/perf/hisi-pmu.rst
@@ -56,14 +56,14 @@ Example usage of perf::
 For HiSilicon uncore PMU v2 whose identifier is 0x30, the topology is the same
 as PMU v1, but some new functions are added to the hardware.
 
-(a) L3C PMU supports filtering by core/thread within the cluster which can be
+1. L3C PMU supports filtering by core/thread within the cluster which can be
 specified as a bitmap::
 
   $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0x3/ sleep 5
 
 This will only count the operations from core/thread 0 and 1 in this cluster.
 
-(b) Tracetag allow the user to chose to count only read, write or atomic
+2. Tracetag allow the user to chose to count only read, write or atomic
 operations via the tt_req parameeter in perf. The default value counts all
 operations. tt_req is 3bits, 3'b100 represents read operations, 3'b101
 represents write operations, 3'b110 represents atomic store operations and
@@ -73,14 +73,16 @@ represents write operations, 3'b110 represents atomic store operations and
 
 This will only count the read operations in this cluster.
 
-(c) Datasrc allows the user to check where the data comes from. It is 5 bits.
+3. Datasrc allows the user to check where the data comes from. It is 5 bits.
 Some important codes are as follows:
-5'b00001: comes from L3C in this die;
-5'b01000: comes from L3C in the cross-die;
-5'b01001: comes from L3C which is in another socket;
-5'b01110: comes from the local DDR;
-5'b01111: comes from the cross-die DDR;
-5'b10000: comes from cross-socket DDR;
+
+- 5'b00001: comes from L3C in this die;
+- 5'b01000: comes from L3C in the cross-die;
+- 5'b01001: comes from L3C which is in another socket;
+- 5'b01110: comes from the local DDR;
+- 5'b01111: comes from the cross-die DDR;
+- 5'b10000: comes from cross-socket DDR;
+
 etc, it is mainly helpful to find that the data source is nearest from the CPU
 cores. If datasrc_cfg is used in the multi-chips, the datasrc_skt shall be
 configured in perf command::
@@ -88,15 +90,25 @@ configured in perf command::
   $# perf stat -a -e hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xE/,
   hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xF/ sleep 5
 
-(d)Some HiSilicon SoCs encapsulate multiple CPU and IO dies. Each CPU die
+4. Some HiSilicon