Merge tag 'pci-v5.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 "Resource management:

   - Improve resource assignment for hot-added nested bridges, e.g.,
     Thunderbolt (Nicholas Johnson)

  Power management:

   - Optionally print config space of devices before suspend (Chen Yu)

   - Increase D3 delay for AMD Ryzen5/7 XHCI controllers (Daniel Drake)

  Virtualization:

   - Generalize DMA alias quirks (James Sewart)

   - Add DMA alias quirk for PLX PEX NTB (James Sewart)

   - Fix IOV memory leak (Navid Emamdoost)

  AER:

   - Log which device prevents error recovery (Yicong Yang)

  Peer-to-peer DMA:

   - Whitelist Intel SkyLake-E (Armen Baloyan)

  Broadcom iProc host bridge driver:

   - Apply PAXC quirk whether driver is built-in or module (Wei Liu)

  Broadcom STB host bridge driver:

   - Add Broadcom STB PCIe host controller driver (Jim Quinlan)

  Intel Gateway SoC host bridge driver:

   - Add driver for Intel Gateway SoC (Dilip Kota)

  Intel VMD host bridge driver:

   - Add support for DMA aliases on other buses (Jon Derrick)

   - Remove dma_map_ops overrides (Jon Derrick)

   - Remove now-unused X86_DEV_DMA_OPS (Christoph Hellwig)

  NVIDIA Tegra host bridge driver:

   - Fix Tegra30 afi_pex2_ctrl register offset (Marcel Ziswiler)

  Panasonic UniPhier host bridge driver:

   - Remove module code since driver can't be built as a module
     (Masahiro Yamada)

  Qualcomm host bridge driver:

   - Add support for SDM845 PCIe controller (Bjorn Andersson)

  TI Keystone host bridge driver:

   - Fix "num-viewport" DT property error handling (Kishon Vijay Abraham I)

   - Fix link training retries initiation (Yurii Monakov)

   - Fix outbound region mapping (Yurii Monakov)

  Misc:

   - Add Switchtec Gen4 support (Kelvin Cao)

   - Add Switchtec Intercomm Notify and Upstream Error Containment
     support (Logan Gunthorpe)

   - Use dma_set_mask_and_coherent() since Switchtec supports 64-bit
     addressing (Wesley Sheng)"

* tag 'pci-v5.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (60 commits)
  PCI: Allow adjust_bridge_window() to shrink resource if necessary
  PCI: Set resource size directly in adjust_bridge_window()
  PCI: Rename extend_bridge_window() to adjust_bridge_window()
  PCI: Rename extend_bridge_window() parameter
  PCI: Consider alignment of hot-added bridges when assigning resources
  PCI: Remove local variable usage in pci_bus_distribute_available_resources()
  PCI: Pass size + alignment to pci_bus_distribute_available_resources()
  PCI: Rename variables
  PCI: vmd: Add two VMD Device IDs
  PCI: Remove unnecessary braces
  PCI: brcmstb: Add MSI support
  PCI: brcmstb: Add Broadcom STB PCIe host controller driver
  x86/PCI: Remove X86_DEV_DMA_OPS
  PCI: vmd: Remove dma_map_ops overrides
  iommu/vt-d: Remove VMD child device sanity check
  iommu/vt-d: Use pci_real_dma_dev() for mapping
  PCI: Introduce pci_real_dma_dev()
  x86/PCI: Expose VMD's pci_dev in struct pci_sysdata
  x86/PCI: Add to_pci_sysdata() helper
  PCI/AER: Initialize aer_fifo
  ...

42 files changed, 2800 insertions, 519 deletions

diff --git a/.mailmap b/.mailmap
index bf581623ee3a..de36dcea38e8 100644
--- a/.mailmap
+++ b/.mailmap
@@ -27,6 +27,8 @@ Andi Shyti <andi@etezian.org> <andi.shyti@samsung.com>
 Andreas Herrmann <aherrman@de.ibm.com>
 Andrey Ryabinin <ryabinin.a.a@gmail.com> <a.ryabinin@samsung.com>
 Andrew Morton <akpm@linux-foundation.org>
+Andrew Murray <amurray@thegoodpenguin.co.uk> <andrew.murray@arm.com>
+Andrew Murray <amurray@thegoodpenguin.co.uk> <amurray@embedded-bits.co.uk>
 Andrew Vasquez <andrew.vasquez@qlogic.com>
 Andy Adamson <andros@citi.umich.edu>
 Antoine Tenart <antoine.tenart@free-electrons.com>
diff --git a/Documentation/PCI/msi-howto.rst b/Documentation/PCI/msi-howto.rst
index 994cbb660ade..aa2046af69f7 100644
--- a/Documentation/PCI/msi-howto.rst
+++ b/Documentation/PCI/msi-howto.rst
@@ -283,5 +283,5 @@ or disabled (0).  If 0 is found in any of the msi_bus files belonging
 to bridges between the PCI root and the device, MSIs are disabled.
 
 It is also worth checking the device driver to see whether it supports MSIs.
-For example, it may contain calls to pci_irq_alloc_vectors() with the
+For example, it may contain calls to pci_alloc_irq_vectors() with the
 PCI_IRQ_MSI or PCI_IRQ_MSIX flags.
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
new file mode 100644
index 000000000000..77d3e81a437b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Brcmstb PCIe Host Controller Device Tree Bindings
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: PCIe host controller
+      - description: builtin MSI controller
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: pcie
+      - const: msi
+
+  ranges:
+    maxItems: 1
+
+  dma-ranges:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sw_pcie
+
+  msi-controller:
+    description: Identifies the node as an MSI controller.
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  brcm,enable-ssc:
+    description: Indicates usage of spread-spectrum clocking.
+    type: boolean
+
+required:
+  - reg
+  - dma-ranges
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-names
+  - interrupt-map-mask
+  - interrupt-map
+  - msi-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    scb {
+            #address-cells = <2>;
+            #size-cells = <1>;
+            pcie0: pcie@7d500000 {
+                    compatible = "brcm,bcm2711-pcie";
+                    reg = <0x0 0x7d500000 0x9310>;
+                    device_type = "pci";
+                    #address-cells = <3>;
+                    #size-cells = <2>;
+                    #interrupt-cells = <1>;
+                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "pcie", "msi";
+                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+                    msi-parent = <&pcie0>;
+                    msi-controller;
+                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
+                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+                    brcm,enable-ssc;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
new file mode 100644
index 000000000000..db605d8a387d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCIe RC controller on Intel Gateway SoCs
+
+maintainers:
+  - Dilip Kota <eswara.kota@linux.intel.com>
+
+properties:
+  compatible:
+    items:
+      - const: intel,lgm-pcie
+      - const: snps,dw-pcie
+
+  device_type:
+    const: pci
+
+  "#address-cells":
+    const: 3
+
+  "#size-cells":
+    const: 2
+
+  reg:
+    items:
+      - description: Controller control and status registers.
+      - description: PCIe configuration registers.
+      - description: Controller application registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+      - const: app
+
+  ranges:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie
+
+  reset-gpios:
+    maxItems: 1
+
+  linux,pci-domain: true
+
+  num-lanes:
+    maximum: 2
+    description: Number of lanes to use for this port.
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-map-mask:
+    description: Standard PCI IRQ mapping properties.
+
+  interrupt-map:
+    description: Standard PCI IRQ mapping properties.
+
+  max-link-speed:
+    description: Specify PCI Gen for link capability.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [ 1, 2, 3, 4 ]
+      - default: 1
+
+  bus-range:
+    description: Range of bus numbers associated with this controller.
+
+  reset-assert-ms:
+    description: |
+      Delay after asserting reset to the PCIe device.
+    maximum: 500
+    default: 100
+
+required:
+  - compatible
+  - device_type
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - reg-names
+  - ranges
+  - resets
+  - clocks
+  - phys
+  - phy-names
+  - reset-gpios
+  - '#interrupt-cells'
+  - interrupt-map
+  - interrupt-map-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/intel,lgm-clk.h>
+    pcie10: pcie@d0e00000 {
+      compatible = "intel,lgm-pcie", "snps,dw-pcie";
+      device_type = "pci";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      reg = <0xd0e00000 0x1000>,
+            <0xd2000000 0x800000>,
+            <0xd0a41000 0x1000>;
+      reg-names = "dbi", "config", "app";
+      linux,pci-domain = <0>;
+      max-link-speed = <4>;
+      bus-range = <0x00 0x08>;
+      interrupt-parent = <&ioapic1>;
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
+                      <0 0 0 2 &ioapic1 28 1>,
+                      <0 0 0 3 &ioapic1 29 1>,
+                      <0 0 0 4 &ioapic1 30 1>;
+      ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
+      resets = <&rcu0 0x50 0>;
+      clocks = <&cgu0 LGM_GCLK_PCIE10>;
+      phys = <&cb0phy0>;
+      phy-names = "pcie";
+      reset-assert-ms = <500>;
+      reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+      num-lanes = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index ada80b01bf0c..981b4de12807 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -11,6 +11,7 @@
 			- "qcom,pcie-ipq4019" for ipq4019
 			- "qcom,pcie-ipq8074" for ipq8074
 			- "qcom,pcie-qcs404" for qcs404
+			- "qcom,pcie-sdm845" for sdm845
 
 - reg:
 	Usage: required
@@ -126,6 +127,18 @@
 			- "master_bus"	AXI Master clock
 			- "slave_bus"	AXI Slave clock
 
+-clock-names:
+	Usage: required for sdm845
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "aux"		Auxiliary clock
+			- "cfg"		Configuration clock
+			- "bus_master"	Master AXI clock
+			- "bus_slave"	Slave AXI clock
+			- "slave_q2a"	Slave Q2A clock
+			- "tbu"		PCIe TBU clock
+			- "pipe"	PIPE clock
+
 - resets:
 	Usage: required
 	Value type: <prop-encoded-array>
@@ -188,6 +201,12 @@
 			- "pwr"			PWR reset
 			- "ahb"			AHB reset
 
+- reset-names:
+	Usage: required for sdm845
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "pci"			PCIe core reset
+
 - power-domains:
 	Usage: required for apq8084 and msm8996/apq8096
 	Value type: <prop-encoded-array>
diff --git a/MAINTAINERS b/MAINTAINERS
index d3ee1adb40d2..1f77fb8cdde3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12914,7 +12914,7 @@ F:	arch/x86/kernel/early-quirks.c
 
 PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS
 M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-R:	Andrew Murray <andrew.murray@arm.com>
+R:	Andrew Murray <amurray@thegoodpenguin.co.uk>
 L:	linux-pci@vger.kernel.org
 Q:	http://patchwork.ozlabs.org/project/linux-pci/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 90288ab1b99e..44d279698c0f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2931,9 +2931,6 @@ config HAVE_ATOMIC_IOMAP
 	def_bool y
 	depends on X86_32
 
-config X86_DEV_DMA_OPS
-	bool
-
 source "drivers/firmware/Kconfig"
 
 source "arch/x86/kvm/Kconfig"
diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h
index 5e12c63b47aa..7e31f7f1bb06 100644
--- a/arch/x86/include/asm/device.h
+++ b/arch/x86/include/asm/device.h
@@ -8,16 +8,6 @@ struct dev_archdata {
 #endif
 };
 
-#if defined(CONFIG_X86_DEV_DMA_OPS) && defined(CONFIG_PCI_DOMAINS)
-struct dma_domain {
-	struct list_head node;
-	const struct dma_map_ops *dma_ops;
-	int domain_nr;
-};
-void add_dma_domain(struct dma_domain *domain);
-void del_dma_domain(struct dma_domain *domain);
-#endif
-
 struct pdev_archdata {
 };
 
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index c1fdd43fe187..40ac1330adb2 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -25,7 +25,7 @@ struct pci_sysdata {
 	void		*fwnode;	/* IRQ domain for MSI assignment */
 #endif
 #if IS_ENABLED(CONFIG_VMD)
-	bool vmd_domain;		/* True if in Intel VMD domain */
+	struct pci_dev	*vmd_dev;	/* VMD Device if in Intel VMD domain */
 #endif
 };
 
@@ -35,12 +35,15 @@ extern int noioapicreroute;
 
 #ifdef CONFIG_PCI
 
+static inline struct pci_sysdata *to_pci_sysdata(const struct pci_bus *bus)
+{
+	return bus->sysdata;
+}
+
 #ifdef CONFIG_PCI_DOMAINS
 static inline int pci_domain_nr(struct pci_bus *bus)
 {
-	struct pci_sysdata *sd = bus->sysdata;
-
-	return sd->domain;
+	return to_pci_sysdata(bus)->domain;
 }
 
 static inline int pci_proc_domain(struct pci_bus *bus)
@@ -52,24 +55,20 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 #ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
 static inline void *_pci_root_bus_fwnode(struct pci_bus *bus)
 {
-	struct pci_sysdata *sd = bus->sysdata;
-
-	return sd->fwnode;
+	return to_pci_sysdata(bus)->fwnode;
 }
 
 #define pci_root_bus_fwnode	_pci_root_bus_fwnode
 #endif
 
+#if IS_ENABLED(CONFIG_VMD)
 static inline bool is_vmd(struct pci_bus *bus)
 {
-#if IS_ENABLED(CONFIG_VMD)
-	struct pci_sysdata *sd = bus->sysdata;
-
-	return sd->vmd_domain;
-#else
-	return false;
-#endif
+	return to_pci_sysdata(bus)->vmd_dev != NULL;
 }
+#else
+#define is_vmd(bus)		false
+#endif /* CONFIG_VMD */
 
 /* Can be used to override the logic in pci_scan_bus for skipping
    already-configured bus numbers - to be used for buggy BIOSes
@@ -124,9 +123,7 @@ void native_restore_msi_irqs(struct pci_dev *dev);
 /* Returns the node based on pci bus */
 static inline int __pcibus_to_node(const struct pci_bus *bus)
 {
-	const struct pci_sysdata *sd = bus->sysdata;
-
-	return sd->node;
+	return to_pci_sysdata(bus)->node;
 }
 
 static inline const struct cpumask *
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 1e59df041456..df1d95913d4e 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -625,43 +625,6 @@ unsigned int pcibios_assign_all_busses(void)
 	return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
 }
 
-#if defined(CONFIG_X86_DEV_DMA_OPS) && defined(CONFIG_PCI_DOMAINS)
-static LIST_HEAD(dma_domain_list);
-static DEFINE_SPINLOCK(dma_domain_list_lock);
-
-void add_dma_domain(struct dma_domain *domain)
-{
-	spin_lock(&dma_domain_list_lock);
-	list_add(&domain->node, &dma_domain_list);
-	spin_unlock(&dma_domain_list_lock);
-}
-EXPORT_SYMBOL_GPL(add_dma_domain);
-
-void del_dma_domain(struct dma_domain *domain)
-{
-	spin_lock(&dma_domain_list_lock);
-	list_del(&domain->node);
-	spin_unlock(&dma_domain_list_lock);
-}
-EXPORT_SYMBOL_GPL(del_dma_domain);
-
-static void set_dma_domain_ops(struct pci_dev *pdev)
-{
-	struct dma_domain *domain;
-
-	spin_lock(&dma_domain_list_lock);
-	list_for_each_entry(domain, &dma_domain_list, node) {
-		if (pci_domain_nr(pdev->bus) == domain->domain_nr) {
-			pdev->dev.dma_ops = domain->dma_ops;
-			break;
-		}
-	}
-	spin_unlock(&dma_domain_list_lock);
-}
-#else
-static void set_dma_domain_ops(struct pci_dev *pdev) {}
-#endif
-
 static void set_dev_domain_options(struct pci_dev *pdev)
 {
 	if (is_vmd(pdev->bus))
@@ -697,7 +660,6 @@ int pcibios_add_device(struct pci_dev *dev)
 		pa_data = data->next;
 		memunmap(data);
 	}
-	set_dma_domain_ops(dev);
 	set_dev_domain_options(dev);
 	return 0;
 }
@@ -736,3 +698,13 @@ int pci_ext_cfg_avail(void)
 	else
 		return 0;
 }
+
+#if IS_ENABLED(CONFIG_VMD)
+struct pci_dev *pci_real_dma_dev(struct pci_dev *dev)
+{
+	if (is_vmd(dev->bus))
+		return to_pci_sysdata(dev->bus)->vmd_dev;
+
+	return dev;
+}
+#endif
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index bd25674ee4db..7a6c056b9b9c 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -230,11 +230,8 @@ static struct pci_dev *setup_aliases(struct device *dev)
 	 */
 	ivrs_alias = amd_iommu_alias_table[pci_dev_id(pdev)];
 	if (ivrs_alias != pci_dev_id(pdev) &&
-	    PCI_BUS_NUM(ivrs_alias) == pdev->bus->number) {
-		pci_add_dma_alias(pdev, ivrs_alias & 0xff);
-		pci_info(pdev, "Added PCI DMA alias %02x.%d\n",
-			PCI_SLOT(ivrs_alias), PCI_FUNC(ivrs_alias));
-	}
+	    PCI_BUS_NUM(ivrs_alias) == pdev->bus->number)
+		pci_add_dma_alias(pdev, ivrs_alias & 0xff, 1);
 
 	clone_aliases(pdev);
 
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 932267f49f9a..35a4a3abedc6 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -774,13 +774,7 @@ static struct intel_iommu *device_to_iommu(struct device *dev, u8 *bus, u8 *devf
 	if (dev_is_pci(dev)) {
 		struct pci_dev *pf_pdev;
 
-		pdev = to_pci_dev(dev);
-
-#ifdef CONFIG_X86
-		/* VMD child devices currently cannot be handled individually */
-		if (is_vmd(pdev->bus))
-			return NULL;
-#endif
+		pdev = pci_real_dma_dev(to_pci_dev(dev));
 
 		/* VFs aren't listed in scope tables; we need to look up
 		 * the PF instead to find the IOMMU. */
@@ -2428,6 +2422,9 @@ static struct dmar_domain *find_domain(struct device *dev)
 		     dev->archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO))
 		return NULL;
 
+	if (dev_is_pci(dev))
+		dev = &pci_real_dma_dev(to_pci_dev(dev))->dev;
+
 	/* No lock here, assumes no domain exit in normal case */
 	info = dev->archdata.iommu;
 	if (likely(info))
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index c77069c8ee5d..20bf00f587bd 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -239,7 +239,6 @@ config PCIE_TANGO_SMP8759
 
 config VMD
 	depends on PCI_MSI && X86_64 && SRCU
-	select X86_DEV_DMA_OPS
 	tristate "Intel Volume Management Device Driver"
 	---help---
 	  Adds support for the Intel Volume Management Device (VMD). VMD is a
@@ -253,6 +252,15 @@ config VMD
 	  To compile this driver as a module, choose M here: the
 	  module will be called vmd.
 
+config PCIE_BRCMSTB
+	tristate "Broadcom Brcmstb PCIe host controller"
+	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on OF
+	depends on PCI_MSI_IRQ_DOMAIN
+	help
+	  Say Y here to enable PCIe host controller support for
+	  Broadcom STB based SoCs, like the Raspberry Pi 4.
+
 config PCI_HYPERV_INTERFACE
 	tristate "Hyper-V PCI Interface"
 	depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index 3d4f597f15ce..01b2502a5323 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
 obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
 obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
 obj-$(CONFIG_VMD) += vmd.o
+obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
 # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
 obj-y				+= dwc/
 
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 625a031b2193..0830dfcfa43a 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -209,6 +209,17 @@ config PCIE_ARTPEC6_EP
 	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
 	  endpoint mode. This uses the DesignWare core.
 
+config PCIE_INTEL_GW
+	bool "Intel Gateway PCIe host controller support"
+	depends on OF && (X86 || COMPILE_TEST)
+	depends on PCI_MSI_IRQ_DOMAIN
+	select PCIE_DW_HOST
+	help
+	  Say 'Y' here to enable PCIe Host controller support on Intel
+	  Gateway SoCs.
+	  The PCIe controller uses the DesignWare core plus Intel-specific
+	  hardware wrappers.
+
 config PCIE_KIRIN
 	depends on OF && (ARM64 || COMPILE_TEST)
 	bool "HiSilicon Kirin series SoCs PCIe controllers"
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index 69faff371f11..8a637cfcf6e9 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
 obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
 obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
+obj-$(CONFIG_PCIE_INTEL_GW) += pcie-intel-gw.o
 obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
 obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
 obj-$(CONFIG_PCI_MESON) += pci-meson.o
diff --git a/drivers/pci/controller/dwc/pci-exynos.c b/drivers/pci/controller/dwc/pci-exynos.c
index 14a6ba4067fb..c5043d951e80 100644
--- a/drivers/pci/controller/dwc/pci-exynos.c
+++ b/drivers/pci/controller/dwc/pci-exynos.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * PCIe host controller driver for Samsung EXYNOS SoCs
+ * PCIe host controller driver for Samsung Exynos SoCs
  *
  * Copyright (C) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index af677254a072..c8c702c494a2 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -422,7 +422,7 @@ static void ks_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie)
 				   lower_32_bits(start) | OB_ENABLEN);
 		ks_pcie_app_writel(ks_pcie, OB_OFFSET_HI(i),
 				   upper_32_bits(start));