Merge tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it
     (Krzysztof Wilczynski)

   - Fix incorrect PCIe device types and remove dev->has_secondary_link
     to simplify code that deals with upstream/downstream ports (Mika
     Westerberg)

   - After suspend, restore Resizable BAR size bits correctly for 1MB
     BARs (Sumit Saxena)

   - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra)

  Virtualization:

   - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna
     Labs (Ali Saidi)

   - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg)

   - Remove group write permissions from sysfs sriov_numvfs,
     sriov_drivers_autoprobe (Kelsey Skunberg)

  Hotplug:

   - Simplify pciehp indicator control (Denis Efremov)

  Peer-to-peer DMA:

   - Allow P2P DMA between root ports for whitelisted bridges (Logan
     Gunthorpe)

   - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe)

   - DMA map P2P DMA requests that traverse host bridge (Logan
     Gunthorpe)

  Amazon Annapurna Labs host bridge driver:

   - Add DT binding and controller driver (Jonathan Chocron)

  Hyper-V host bridge driver:

   - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui)

   - Fix PCI domain number collisions (Haiyang Zhang)

   - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang)

   - Fix build errors on non-SYSFS config (Randy Dunlap)

  i.MX6 host bridge driver:

   - Limit DBI register length (Stefan Agner)

  Intel VMD host bridge driver:

   - Fix config addressing issues (Jon Derrick)

  Layerscape host bridge driver:

   - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao)

   - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately
     (Xiaowei Bao)

  Mediatek host bridge driver:

   - Add MT7629 controller support (Jianjun Wang)

  Mobiveil host bridge driver:

   - Fix CPU base address setup (Hou Zhiqiang)

   - Make "num-lanes" property optional (Hou Zhiqiang)

  Tegra host bridge driver:

   - Fix OF node reference leak (Nishka Dasgupta)

   - Disable MSI for root ports to work around design problem (Vidya
     Sagar)

   - Add Tegra194 DT binding and controller support (Vidya Sagar)

   - Add support for sideband pins and slot regulators (Vidya Sagar)

   - Add PIPE2UPHY support (Vidya Sagar)

  Misc:

   - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg)

   - Unexport pci_bus_get(), etc (Kelsey Skunberg)

   - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in
     the PCI core (Kelsey Skunberg)

   - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg)

   - Mark expected switch fall-through (Gustavo A. R. Silva)

   - Propagate errors for optional regulators and PHYs (Thierry Reding)

   - Fix kernel command line resource_alignment parameter issues (Logan
     Gunthorpe)"

* tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits)
  PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI
  arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
  arm64: tegra: Add configuration for PCIe C5 sideband signals
  PCI: tegra: Add support to enable slot regulators
  PCI: tegra: Add support to configure sideband pins
  PCI: vmd: Fix shadow offsets to reflect spec changes
  PCI: vmd: Fix config addressing when using bus offsets
  PCI: dwc: Add validation that PCIe core is set to correct mode
  PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver
  dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
  PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
  PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port
  PCI: Add ACS quirk for Amazon Annapurna Labs root ports
  PCI: Add Amazon's Annapurna Labs vendor ID
  MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer
  PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers
  dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
  dt-bindings: PCI: tegra: Add sideband pins configuration entries
  PCI: tegra: Add Tegra194 PCIe support
  PCI: Get rid of dev->has_secondary_link flag
  ...

99 files changed, 4201 insertions, 1186 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index d3814789304f..254d8a369f32 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3465,12 +3465,13 @@
 				specify the device is described above.
 				If <order of align> is not specified,
 				PAGE_SIZE is used as alignment.
-				PCI-PCI bridge can be specified, if resource
+				A PCI-PCI bridge can be specified if resource
 				windows need to be expanded.
 				To specify the alignment for several
 				instances of a device, the PCI vendor,
 				device, subvendor, and subdevice may be
-				specified, e.g., 4096@pci:8086:9c22:103c:198f
+				specified, e.g., 12@pci:8086:9c22:103c:198f
+				for 4096-byte alignment.
 		ecrc=		Enable/disable PCIe ECRC (transaction layer
 				end-to-end CRC checking).
 				bios: Use BIOS/firmware settings. This is the
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index 5561a1c060d0..78494c4050f7 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -11,7 +11,6 @@ Required properties:
 	     the ATU address space.
     (The old way of getting the configuration address space from "ranges"
     is deprecated and should be avoided.)
-- num-lanes: number of lanes to use
 RC mode:
 - #address-cells: set to <3>
 - #size-cells: set to <2>
@@ -34,6 +33,11 @@ Optional properties:
 - clock-names: Must include the following entries:
 	- "pcie"
 	- "pcie_bus"
+- snps,enable-cdm-check: This is a boolean property and if present enables
+   automatic checking of CDM (Configuration Dependent Module) registers
+   for data corruption. CDM registers include standard PCIe configuration
+   space registers, Port Logic registers, DMA and iATU (internal Address
+   Translation Unit) registers.
 RC mode:
 - num-viewport: number of view ports configured in hardware. If a platform
   does not specify it, the driver assumes 2.
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index a7f5f5afa0e6..de4b2baf91e8 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -50,7 +50,7 @@ Additional required properties for imx7d-pcie and imx8mq-pcie:
 - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
 - resets: Must contain phandles to PCIe-related reset lines exposed by SRC
   IP block
-- reset-names: Must contain the following entires:
+- reset-names: Must contain the following entries:
 	       - "pciephy"
 	       - "apps"
 	       - "turnoff"
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
index 92437a366e5f..7468d666763a 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -6,6 +6,7 @@ Required properties:
 	"mediatek,mt2712-pcie"
 	"mediatek,mt7622-pcie"
 	"mediatek,mt7623-pcie"
+	"mediatek,mt7629-pcie"
 - device_type: Must be "pci"
 - reg: Base addresses and lengths of the PCIe subsys and root ports.
 - reg-names: Names of the above areas to use during resource lookup.
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
new file mode 100644
index 000000000000..b739f92da58e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
@@ -0,0 +1,171 @@
+NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based)
+
+This PCIe host controller is based on the Synopsis Designware PCIe IP
+and thus inherits all the common properties defined in designware-pcie.txt.
+
+Required properties:
+- compatible: For Tegra19x, must contain "nvidia,tegra194-pcie".
+- device_type: Must be "pci"
+- power-domains: A phandle to the node that controls power to the respective
+  PCIe controller and a specifier name for the PCIe controller. Following are
+  the specifiers for the different PCIe controllers
+    TEGRA194_POWER_DOMAIN_PCIEX8B: C0
+    TEGRA194_POWER_DOMAIN_PCIEX1A: C1
+    TEGRA194_POWER_DOMAIN_PCIEX1A: C2
+    TEGRA194_POWER_DOMAIN_PCIEX1A: C3
+    TEGRA194_POWER_DOMAIN_PCIEX4A: C4
+    TEGRA194_POWER_DOMAIN_PCIEX8A: C5
+  these specifiers are defined in
+  "include/dt-bindings/power/tegra194-powergate.h" file.
+- reg: A list of physical base address and length pairs for each set of
+  controller registers. Must contain an entry for each entry in the reg-names
+  property.
+- reg-names: Must include the following entries:
+  "appl": Controller's application logic registers
+  "config": As per the definition in designware-pcie.txt
+  "atu_dma": iATU and DMA registers. This is where the iATU (internal Address
+             Translation Unit) registers of the PCIe core are made available
+             for SW access.
+  "dbi": The aperture where root port's own configuration registers are
+         available
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+  "intr": The Tegra interrupt that is asserted for controller interrupts
+  "msi": The Tegra interrupt that is asserted when an MSI is received
+- bus-range: Range of bus numbers associated with this controller
+- #address-cells: Address representation for root ports (must be 3)
+  - cell 0 specifies the bus and device numbers of the root port:
+    [23:16]: bus number
+    [15:11]: device number
+  - cell 1 denotes the upper 32 address bits and should be 0
+  - cell 2 contains the lower 32 address bits and is used to translate to the
+    CPU address space
+- #size-cells: Size representation for root ports (must be 2)
+- ranges: Describes the translation of addresses for root ports and standard
+  PCI regions. The entries must be 7 cells each, where the first three cells
+  correspond to the address as described for the #address-cells property
+  above, the fourth and fifth cells are for the physical CPU address to
+  translate to and the sixth and seventh cells are as described for the
+  #size-cells property above.
+  - Entries setup the mapping for the standard I/O, memory and
+    prefetchable PCI regions. The first cell determines the type of region
+    that is setup:
+    - 0x81000000: I/O memory region
+    - 0x82000000: non-prefetchable memory region
+    - 0xc2000000: prefetchable memory region
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- #interrupt-cells: Size representation for interrupts (must be 1)
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - core
+- resets: Must cont