Merge tag 'hwmon-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hmon updates from Guenter Roeck:
 "New drivers:
   - ISL28022 power monitor
   - Nuvoton NCT7363Y

  Added support for new chips to existing drivers:
   - The tmp180 driver now supports NXP p3t1085, including its I3C mode
   - The ina2xx driver now supports SY24655 and INA260
   - The amc6821 driver now supports tsd,mule

  Other notable improvements:
   - The sht4x driver now supports the chip heater
   - The pmbus/isl68137 driver now supports a voltage divider on Vout
   - The cros_ec driver registers with the thermal framework
   - The pmbus/ltc2978 driver now supports LTC7841
   - The PMBus core now allow drivers to override WRITE_PROTECT

  Various other minor improvements and cleanups"

* tag 'hwmon-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (51 commits)
  hwmon: (pmbus/isl68137) add support for voltage divider on Vout
  dt-bindings: hwmon: isl68137: add bindings to support voltage dividers
  hwmon: tmp108: fix I3C dependency
  hwmon: (cros_ec) register thermal sensors to thermal framework
  hwmon: (tmp108) Add support for I3C device
  hwmon: (tmp108) Add helper function tmp108_common_probe() to prepare I3C support
  hwmon: (acpi_power_meter) Fix fail to load module on platform without _PMD method
  hwmon: (nct6775-core) Fix overflows seen when writing limit attributes
  hwmon: (pwm-fan) Introduce start from stopped state handling
  dt-bindings: hwmon: pwm-fan: Document start from stopped state properties
  hwmon: (tmp108) Add NXP p3t1085 support
  dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string
  hwmon: (sch5627, max31827) Fix typos in driver documentation
  hwmon: (jc42) Drop of_match_ptr() protection
  hwmon: (f71882fg) Fix grammar in fan speed trip points explanation
  dt-bindings: hwmon: pmbus: add ti tps25990 support
  hwmon: (pmbus/core) clear faults after setting smbalert mask
  hwmon: (pmbus/core) allow drivers to override WRITE_PROTECT
  hwmon: (pmbus) add documentation for existing flags
  hwmon: (ina226) Add support for SY24655
  ...

85 files changed, 2620 insertions, 250 deletions

diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc2978.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc2978.yaml
index 1f98da32f3fe..37e1dc9c7dd3 100644
--- a/Documentation/devicetree/bindings/hwmon/lltc,ltc2978.yaml
+++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc2978.yaml
@@ -26,6 +26,7 @@ properties:
       - lltc,ltc3886
       - lltc,ltc3887
       - lltc,ltc3889
+      - lltc,ltc7841
       - lltc,ltc7880
       - lltc,ltm2987
       - lltc,ltm4664
@@ -50,6 +51,7 @@ properties:
       * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7
       * ltc2978 : vout0 - vout7
       * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1
+      * ltc7841 : vout0
       * ltc7880 : vout0 - vout1
       * ltc3883 : vout0
       * ltm4664 : vout0 - vout1
diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7363.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7363.yaml
new file mode 100644
index 000000000000..c1e5dedc2f6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7363.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/nuvoton,nct7363.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NCT7363Y Hardware Monitoring IC
+
+maintainers:
+  - Ban Feng <kcfeng0@nuvoton.com>
+
+description: |
+  The NCT7363Y is a fan controller which provides up to 16 independent
+  FAN input monitors, and up to 16 independent PWM outputs with SMBus interface.
+
+  Datasheets: Available from Nuvoton upon request
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nct7363
+      - nuvoton,nct7362
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+patternProperties:
+  "^fan-[0-9]+$":
+    $ref: fan-common.yaml#
+    unevaluatedProperties: false
+    required:
+      - pwms
+      - tach-ch
+
+required:
+  - compatible
+  - reg
+  - "#pwm-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon: hwmon@22 {
+            compatible = "nuvoton,nct7363";
+            reg = <0x22>;
+            #pwm-cells = <2>;
+
+            fan-0 {
+                pwms = <&hwmon 0 50000>;
+                tach-ch = /bits/ 8 <0x00>;
+            };
+            fan-1 {
+                pwms = <&hwmon 1 50000>;
+                tach-ch = /bits/ 8 <0x01>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/isil,isl68137.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/isil,isl68137.yaml
new file mode 100644
index 000000000000..bac5f8e352aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/isil,isl68137.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/pmbus/isil,isl68137.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Digital Multiphase Voltage Regulators with PMBus
+
+maintainers:
+  - Grant Peltier <grant.peltier.jg@renesas.com>
+
+description: |
+  Renesas digital multiphase voltage regulators with PMBus.
+  https://www.renesas.com/en/products/power-management/multiphase-power/multiphase-dcdc-switching-controllers
+
+properties:
+  compatible:
+    enum:
+      - isil,isl68137
+      - renesas,isl68220
+      - renesas,isl68221
+      - renesas,isl68222
+      - renesas,isl68223
+      - renesas,isl68224
+      - renesas,isl68225
+      - renesas,isl68226
+      - renesas,isl68227
+      - renesas,isl68229
+      - renesas,isl68233
+      - renesas,isl68239
+      - renesas,isl69222
+      - renesas,isl69223
+      - renesas,isl69224
+      - renesas,isl69225
+      - renesas,isl69227
+      - renesas,isl69228
+      - renesas,isl69234
+      - renesas,isl69236
+      - renesas,isl69239
+      - renesas,isl69242
+      - renesas,isl69243
+      - renesas,isl69247
+      - renesas,isl69248
+      - renesas,isl69254
+      - renesas,isl69255
+      - renesas,isl69256
+      - renesas,isl69259
+      - isil,isl69260
+      - renesas,isl69268
+      - isil,isl69269
+      - renesas,isl69298
+      - renesas,raa228000
+      - renesas,raa228004
+      - renesas,raa228006
+      - renesas,raa228228
+      - renesas,raa229001
+      - renesas,raa229004
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-3])$":
+    type: object
+    description:
+      Container for properties specific to a particular channel (rail).
+
+    properties:
+      reg:
+        description: The channel (rail) index.
+        items:
+          minimum: 0
+          maximum: 3
+
+      vout-voltage-divider:
+        description: |
+          Resistances of a voltage divider placed between Vout and the voltage
+          sense (Vsense) pin for the given channel (rail). It has two numbers
+          representing the resistances of the voltage divider provided as
+          <Rout Rtotal> which yields an adjusted Vout as
+          Vout_adj = Vout * Rtotal / Rout given the original Vout as reported
+          by the Vsense pin. Given a circuit configuration similar to the one
+          below, Rtotal = R1 + Rout.
+
+            Vout ----.
+                     |
+                  .-----.
+                  | R1  |
+                  '-----'
+                     |
+                     +---- Vsense
+                     |
+                  .-----.
+                  | Rout|
+                  '-----'
+                     |
+                    GND
+
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 2
+        maxItems: 2
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      isl68239@60 {
+        compatible = "isil,isl68137";
+        reg = <0x60>;
+      };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      isl68239@60 {
+        compatible = "renesas,isl68239";
+        reg = <0x60>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0>;
+          vout-voltage-divider = <1000 2000>;  // Reported Vout/Pout would be scaled by 2
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/mps,mp2975.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/mps,mp2975.yaml
new file mode 100644
index 000000000000..f7bc4f077929
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/mps,mp2975.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/mps,mp2975.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MPS MP2975 Synchronous Buck Regulator
+
+maintainers:
+  - Naresh Solanki <naresh.solanki@9elements.com>
+
+description:
+  The MPS MP2971, MP2973 & MP2975 is a multi-phase voltage regulator
+  designed for use in high-performance computing and server
+  applications. It supports I2C/PMBus for control and monitoring.
+
+properties:
+  compatible:
+    enum:
+      - mps,mp2971
+      - mps,mp2973
+      - mps,mp2975
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      List of regulators provided by this controller.
+
+    patternProperties:
+      "^vout[0-1]$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@58 {
+            compatible = "mps,mp2973";
+            reg = <0x58>;
+
+            interrupt-parent = <&smb_pex_cpu1_event>;
+            interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                vout0 {
+                    regulator-name = "pvccin_cpu1";
+                    regulator-enable-ramp-delay = <200>;
+                };
+                vout1 {
+                    regulator-name = "pvccfa_ehv_fivra_cpu1";
+                    regulator-enable-ramp-delay = <200>;
+                };
+            };
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,tps25990.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,tps25990.yaml
new file mode 100644
index 000000000000..f4115870e450
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,tps25990.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/pmbus/ti,tps25990.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TPS25990 Stackable eFuse
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+description:
+  The TI TPS25990 is an integrated, high-current circuit
+  protection and power management device with PMBUS interface
+
+properties:
+  compatible:
+    const: ti,tps25990
+
+  reg:
+    maxItems: 1
+
+  ti,rimon-micro-ohms:
+    description:
+      micro Ohms value of the resistance installed between the Imon pin
+      and the ground reference.
+
+  interrupts:
+    description: PMBUS SMB Alert Interrupt.
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      list of regulators provided by this controller.
+
+    properties:
+      vout:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+      gpdac1:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+      gpdac2:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ti,rimon-micro-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hw-monitor@46 {