Merge tag 'mtd/for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Miquel Raynal:
 "MTD changes:

   - parsers: ofpart: add workaround for #size-cells 0

   - dt-bindings: partitions: Fix partition node name pattern

   - dataflash: remove duplicate SPI ID table

  Raw NAND core changes:

   - Check the data only read pattern only once

   - Prepare the late addition of supported operation checks

   - Support for sequential cache reads

   - Fix nand_chip kdoc

  Raw NAND driver changes:

   - Fsl_elbc: Propagate HW ECC settings to HW

   - Marvell: Add missing layouts

   - Pasemi: Don't use static data to track per-device state

   - Sunxi:
      - Fix the size of the last OOB region
      - Remove an unnecessary check
      - Remove an unnecessary check
      - Clean up chips after failed init
      - Precompute the ECC_CTL register value
      - Embed sunxi_nand_hw_ecc by value
      - Update OOB layout to match hardware

   - tmio_nand: Remove driver

   - vf610_nfc: Use regular comments for functions

  SPI-NAND driver changes:

   - Add support for AllianceMemory AS5F34G04SND

   - Macronix: use scratch buffer for DMA operation

  NAND ECC changes:

   - Mediatek:
      - Add ECC support fot MT7986 IC
      - Add compatible for MT7986
      - dt-bindings: Split ECC engine with rawnand controller

  SPI NOR changes:

   - Misc core fixes

  SPI NOR driver changes:

   - Spansion: Minor fixes"

* tag 'mtd/for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (33 commits)
  mtd: parsers: ofpart: add workaround for #size-cells 0
  mtd: rawnand: sunxi: Precompute the ECC_CTL register value
  mtd: rawnand: sunxi: Embed sunxi_nand_hw_ecc by value
  mtd: rawnand: sunxi: Update OOB layout to match hardware
  mtd: spi-nor: Sort headers alphabetically
  mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type
  mtd: nand: ecc-mtk: Add ECC support fot MT7986 IC
  dt-bindings: mtd: mediatek,nand-ecc-engine: Add compatible for MT7986
  dt-bindings: mtd: Split ECC engine with rawnand controller
  mtd: rawnand: fsl_elbc: Propagate HW ECC settings to HW
  mtd: spinand: Add support for AllianceMemory AS5F34G04SND
  dt-bindings: mtd: partitions: Fix partition node name pattern
  mtd: spi-nor: Create macros to define chip IDs and geometries
  mtd: spi-nor: spansion: Make CFRx reg fields generic
  mtd: spi-nor: spansion: Consider reserved bits in CFR5 register
  mtd: spi-nor: core: fix implicit declaration warning
  mtd: spinand: macronix: use scratch buffer for DMA operation
  mtd: rawnand: Fix nand_chip kdoc
  mtd: rawnand: vf610_nfc: use regular comments for functions
  mtd: rawnand: Support for sequential cache reads
  ...

33 files changed, 782 insertions, 935 deletions

diff --git a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
new file mode 100644
index 000000000000..a6e7f123eda7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mediatek,mtk-nfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek(MTK) SoCs raw NAND FLASH controller (NFC)
+
+maintainers:
+  - Xiangsheng Hou <xiangsheng.hou@mediatek.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-nfc
+      - mediatek,mt2712-nfc
+      - mediatek,mt7622-nfc
+
+  reg:
+    items:
+      - description: Base physical address and size of NFI.
+
+  interrupts:
+    items:
+      - description: NFI interrupt
+
+  clocks:
+    items:
+      - description: clock used for the controller
+      - description: clock used for the pad
+
+  clock-names:
+    items:
+      - const: nfi_clk
+      - const: pad_clk
+
+  ecc-engine:
+    description: device-tree node of the required ECC engine.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    $ref: nand-chip.yaml#
+    unevaluatedProperties: false
+    properties:
+      reg:
+        maximum: 1
+      nand-on-flash-bbt: true
+      nand-ecc-mode:
+        const: hw
+
+allOf:
+  - $ref: nand-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt2701-nfc
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-step-size:
+              enum: [ 512, 1024 ]
+            nand-ecc-strength:
+              enum: [4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+                     40, 44, 48, 52, 56, 60]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt2712-nfc
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-step-size:
+              enum: [ 512, 1024 ]
+            nand-ecc-strength:
+              enum: [4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+                     40, 44, 48, 52, 56, 60, 68, 72, 80]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7622-nfc
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-step-size:
+              const: 512
+            nand-ecc-strength:
+              enum: [4, 6, 8, 10, 12]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ecc-engine
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        nand-controller@1100d000 {
+            compatible = "mediatek,mt2701-nfc";
+            reg = <0 0x1100d000 0 0x1000>;
+            interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&pericfg CLK_PERI_NFI>,
+                     <&pericfg CLK_PERI_NFI_PAD>;
+            clock-names = "nfi_clk", "pad_clk";
+            ecc-engine = <&bch>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            nand@0 {
+                reg = <0>;
+
+                nand-on-flash-bbt;
+                nand-ecc-mode = "hw";
+                nand-ecc-step-size = <1024>;
+                nand-ecc-strength = <24>;
+
+                partitions {
+                    compatible = "fixed-partitions";
+                    #address-cells = <1>;
+                    #size-cells = <1>;
+
+                    preloader@0 {
+                        label = "pl";
+                        read-only;
+                        reg = <0x0 0x400000>;
+                    };
+                    android@400000 {
+                        label = "android";
+                        reg = <0x400000 0x12c00000>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml b/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
new file mode 100644
index 000000000000..505baf1e8830
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mediatek,nand-ecc-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek(MTK) SoCs NAND ECC engine
+
+maintainers:
+  - Xiangsheng Hou <xiangsheng.hou@mediatek.com>
+
+description: |
+  MTK NAND ECC engine can cowork with MTK raw NAND and SPI NAND controller.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-ecc
+      - mediatek,mt2712-ecc
+      - mediatek,mt7622-ecc
+      - mediatek,mt7986-ecc
+
+  reg:
+    items:
+      - description: Base physical address and size of ECC.
+
+  interrupts:
+    items:
+      - description: ECC interrupt
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: nfiecc_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        bch: ecc@1100e000 {
+            compatible = "mediatek,mt2701-ecc";
+            reg = <0 0x1100e000 0 0x1000>;
+            interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&pericfg CLK_PERI_NFI_ECC>;
+            clock-names = "nfiecc_clk";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
deleted file mode 100644
index 839ea2f93d04..000000000000
--- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
+++ /dev/null
@@ -1,176 +0,0 @@
-MTK SoCs NAND FLASH controller (NFC) DT binding
-
-This file documents the device tree bindings for MTK SoCs NAND controllers.
-The functional split of the controller requires two drivers to operate:
-the nand controller interface driver and the ECC engine driver.
-
-The hardware description for both devices must be captured as device
-tree nodes.
-
-1) NFC NAND Controller Interface (NFI):
-=======================================
-
-The first part of NFC is NAND Controller Interface (NFI) HW.
-Required NFI properties:
-- compatible:			Should be one of
-				"mediatek,mt2701-nfc",
-				"mediatek,mt2712-nfc",
-				"mediatek,mt7622-nfc".
-- reg:				Base physical address and size of NFI.
-- interrupts:			Interrupts of NFI.
-- clocks:			NFI required clocks.
-- clock-names:			NFI clocks internal name.
-- ecc-engine:			Required ECC Engine node.
-- #address-cells:		NAND chip index, should be 1.
-- #size-cells:			Should be 0.
-
-Example:
-
-	nandc: nfi@1100d000 {
-		compatible = "mediatek,mt2701-nfc";
-		reg = <0 0x1100d000 0 0x1000>;
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_NFI>,
-			 <&pericfg CLK_PERI_NFI_PAD>;
-		clock-names = "nfi_clk", "pad_clk";
-		ecc-engine = <&bch>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-        };
-
-Platform related properties, should be set in {platform_name}.dts:
-- children nodes:	NAND chips.
-
-Children nodes properties:
-- reg:			Chip Select Signal, default 0.
-			Set as reg = <0>, <1> when need 2 CS.
-Optional:
-- nand-on-flash-bbt:	Store BBT on NAND Flash.
-- nand-ecc-mode:	the NAND ecc mode (check driver for supported modes)
-- nand-ecc-step-size:	Number of data bytes covered by a single ECC step.
-			valid values:
-			512 and 1024 on mt2701 and mt2712.
-			512 only on mt7622.
-			1024 is recommended for large page NANDs.
-- nand-ecc-strength:	Number of bits to correct per ECC step.
-			The valid values that each controller supports:
-			mt2701: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28,
-				32, 36, 40, 44, 48, 52, 56, 60.
-			mt2712: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28,
-				32, 36, 40, 44, 48, 52, 56, 60, 68, 72, 80.
-			mt7622: 4, 6, 8, 10, 12, 14, 16.
-			The strength should be calculated as follows:
-			E = (S - F) * 8 / B
-			S = O / (P / Q)
-				E :	nand-ecc-strength.
-				S :	spare size per sector.
-				F :	FDM size, should be in the range [1,8].
-					It is used to store free oob data.
-				O :	oob size.
-				P :	page size.
-				Q :	nand-ecc-step-size.
-				B :	number of parity bits needed to correct
-					1 bitflip.
-					According to MTK NAND controller design,
-					this number depends on max ecc step size
-					that MTK NAND controller supports.
-					If max ecc step size supported is 1024,
-					then it should be always 14. And if max
-					ecc step size is 512, then it should be
-					always 13.
-			If the result does not match any one of the listed
-			choices above, please select the smaller valid value from
-			the list.
-			(otherwise the driver will do the adjustment at runtime)
-- pinctrl-names:	Default NAND pin GPIO setting name.
-- pinctrl-0:		GPIO setting node.
-
-Example:
-	&pio {
-		nand_pins_default: nanddefault {
-			pins_dat {
-				pinmux = <MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7>,
-					 <MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6>,
-					 <MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4>,
-					 <MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3>,
-					 <MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0>,
-					 <MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1>,
-					 <MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5>,
-					 <MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8>,
-					 <MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2>;
-				input-enable;
-				drive-strength = <MTK_DRIVE_8mA>;
-				bias-pull-up;
-			};
-
-			pins_we {
-				pinmux = <MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB>;
-				drive-strength = <MTK_DRIVE_8mA>;
-				bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
-			};
-
-			pins_ale {
-				pinmux = <MT2701_PIN_116_MSDC0_CMD__FUNC_NALE>;
-				drive-strength = <MTK_DRIVE_8mA>;
-				bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-			};
-		};
-	};
-
-	&nandc {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_pins_default>;
-		nand@0 {
-			reg = <0>;
-			nand-on-flash-bbt;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <24>;
-			nand-ecc-step-size = <1024>;
-		};
-	};
-
-NAND chip optional subnodes:
-- Partitions, see Documentation/devicetree/bindings/mtd/mtd.yaml
-
-Example:
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			preloader@0 {
-				label = "pl";
-				read-only;
-				reg = <0x00000000 0x00400000>;
-			};
-			android@00400000 {
-				label = "android";
-				reg = <0x00400000 0x12c00000>;
-			};
-		};
-	};
-
-2) ECC Engine:
-==============
-
-Required BCH properties:
-- compatible:	Should be one of
-		"mediatek,mt2701-ecc",
-		"mediatek,mt2712-ecc",
-		"mediatek,mt7622-ecc".
-- reg:		Base physical address and size of ECC.
-- interrupts:	Interrupts of ECC.
-- clocks:	ECC required clocks.
-- clock-names:	ECC clocks internal name.
-
-Example:
-
-	bch: ecc@1100e000 {
-		compatible = "mediatek,mt2701-ecc";
-		reg = <0 0x1100e000 0 0x1000>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_NFI_ECC>;
-		clock-names = "nfiecc_clk";
-	};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
index 9aca4e6c6047..2edc65e0e361 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
@@ -32,7 +32,7 @@ properties:
     enum: [1, 2]
 
 patternProperties:
-  "partition(-.+|@[0-9a-f]+)":
+  "^partition(-.+|@[0-9a-f]+)$":
     $ref: partition.yaml
 
 required:
diff --git a/MAINTAINERS b/MAINTAINERS
index 84bd678b8af9..28522a08b94b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13139,7 +13139,7 @@ F:	drivers/phy/ralink/phy-mt7621-pci.c
 MEDIATEK NAND CONTROLLER DRIVER
 L:	linux-mtd@lists.infradead.org
 S:	Orphan
-F:	Documentation/devicetree/bindings/mtd/mtk-nand.txt
+F:	Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
 F:	drivers/mtd/nand/raw/mtk_*
 
 MEDIATEK PMIC LED DRIVER
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 25bad4318305..3bbaa590c768 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -96,13 +96,6 @@ struct dataflash {
 	struct mtd_info		mtd;
 };
 
-static const struct spi_device_id dataflash_dev_ids[] = {
-	{ "at45" },
-	{ "dataflash" },
-	{ },
-};
-MODULE_DEVICE_TABLE(spi, dataflash_dev_ids);
-
 #ifdef CONFIG_OF
 static const struct of_device_id dataflash_dt_ids[] = {
 	{ .compatible = "atmel,at45", },
@@ -939,8 +932,6 @@ static struct spi_driver dataflash_driver = {
 		.name		= "mtd_dataflash",
 		.of_match_table = of_match_ptr(dataflash_dt_ids),
 	},
-	.id_table = dataflash_dev_ids,
-
 	.probe		= dataflash_probe,
 	.remove		= dataflash_remove,
 	.id_table	= dataflash_spi_ids,
diff --git a/drivers/mtd/nand/ecc-mtk.c b/drivers/mtd/nand/ecc-mtk.c
index 9f9b201fe706..c75bb8b80cc1 100644
--- a/drivers/mtd/nand/ecc-mtk.c
+++ b/drivers/mtd/nand/ecc-mtk.c
@@ -40,6 +40,10 @@
 #define ECC_IDLE_REG(op)	((op) == ECC_ENCODE ? ECC_ENCIDLE : ECC_DECIDLE)
 #define ECC_CTL_REG(op)		((op) == ECC_ENCODE ? ECC_ENCCON : ECC_DECCON)
 
+#define ECC_ERRMASK_MT7622	GENMASK(4, 0)
+#define ECC_ERRMASK_MT2701	GENMASK(5, 0)
+#define ECC_ERRMASK_MT2712	GENMASK(6, 0)
+
 struct mtk_ecc_caps {
 	u32 err_mask;
 	u32 err_shift;
@@ -79,6 +83,10 @@ static const u8 ecc_strength_mt7622[] = {
 	4, 6, 8, 10, 12
 };
 
+static const u8 ecc_strength_mt7986[] = {
+	4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
+};
+
 enum mtk_ecc_regs {
 	ECC_ENCPAR00,
 	ECC_ENCIRQ_EN,
@@ -451,7 +459,7 @@ unsigned int mtk_ecc_get_parity_bits(struct mtk_ecc *ecc)
 EXPORT_SYMBOL(mtk_ecc_get_parity_bits);
 
 static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
-	.err_mask = 0x3f,
+	.err_mask = ECC_ERRMASK_MT2701,
 	.err_shift = 8,
 	.ecc_strength = ecc_strength_mt2701,
 	.ecc_regs = mt2701_ecc_regs,
@@ -462,7 +470,7 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
 };
 
 static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
-	.err_mask = 0x7f,
+	.err_mask = ECC_ERRMASK_MT2712,
 	.err_shift = 8,
 	.ecc_strength = ecc_strength_mt2712,
 	.ecc_regs = mt2712_ecc_regs,
@@ -473,7 +481,7 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
 };
 
 static const struct mtk_ecc_caps mtk_ecc_caps_mt7622 = {
-	.err_mask = 0x1f,
+	.err_mask = ECC_ERRMASK_MT7622,
 	.err_shift = 5,
 	.ecc_strength = ecc_strength_mt7622,
 	.ecc_regs = mt7622_ecc_regs,
@@ -483,6 +491,17 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt7622 = {
 	.pg_irq_sel = 0,
 };
 
+static const struct mtk_ecc_caps mtk_ecc_caps_mt7986 = {
+	.err_mask = ECC_ERRMASK_MT7622,
+	.err_shift = 8,
+	.ecc_strength = ecc_strength_mt7986,
+	.ecc_regs = mt2712_ecc_regs,
+	.num_ecc_strength = 11,
+	.ecc_mode_shift = 5,
+	.parity_bits = 14,
+	.pg_irq_sel = 1,
+};
+
 static const struct of_device_id mtk_ecc_dt_match[] = {
 	{
 		.compatible = "mediatek,mt2701-ecc",
@@ -493,6 +512,9 @@ static const struct of_device_id mtk_ecc_dt_match[] = {
 	}, {
 		.compatible = "mediatek,mt7622-ecc",
 		.data = &mtk_ecc_caps_mt7622,
+	}, {
+		.compatible = "mediatek,mt7986-ecc",
+		.data = &mtk_ecc_caps_mt7986,
 	},
 	{},
 };
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 048b1c8f08ee..170f1185ddc4 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -193,13 +193,6 @@ config MTD_NAND_PASEMI
 	  Enables support for NAND Flash interface on PA Semi PWRficient
 	  based boards
 
-config MTD_NAND_TMIO
-	tristate "Toshiba Mobile IO NAND controller"
-	depends on MFD_TMIO
-	help
-	  Support for NAND flash connected to a Toshiba Mobile IO
-	  Controller in some PDAs, including the Sharp SL6000x.
-
 source "drivers/mtd/nand/raw/brcmnand/Kconfig"
 
 config MTD_NAND_BCM47XXNFLASH
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index fa1d00120310..917cdfb815b9 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -23,7 +23,6 @@ omap2_nand-objs := omap2.o
 obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2_nand.o
 obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD)	+= omap_elm.o
 obj-$(CONFIG_MTD_NAND_MARVELL)		+= marvell_nand.o
-obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
 obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
 obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
 obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index a18d121396aa..e25119e58b69 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -725,6 +725,7 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
 	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	unsigned int al;
+	u32 br;
 
 	/*
 	 * if ECC was not chosen in DT, decide whether to use HW or SW ECC from
@@ -764,6 +765,13 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
 		return -EINVAL;
 	}
 
+	/* enable/disable HW ECC checking and generating based on if HW ECC was chosen */
+	br = in_be32(&lbc->bank[priv->bank].br) & ~BR_DECC;
+	if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
+		out_be32(&lbc->bank[priv->bank].br, br | BR_DECC_CHK_GEN);
+	else
+		out_be32(&lbc->bank[priv->bank].br, br | BR_DECC_OFF);
+
 	/* calculate FMR Address Length field */
 	al = 0;
 	if (chip->pagemask & 0xffff0000)
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 42c64dcea767..3034916d2e25 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -288,10 +288,17 @@ static const struct marvell_hw_ecc_layout marvell_nfc_layouts[] = {
 	MARVELL_LAYOUT( 2048,   512,  1,  1,  1, 2048, 40, 24,  0,  0,  0),
 	MARVELL_LAYOUT( 2048,   512,  4,  1,  1, 2048, 32, 30,  0,  0,  0),
 	MARVELL_LAYOUT( 2048,   512,  8,  2,  1, 1024,  0, 30,1024,32, 30),
+	MARVELL_LAYOUT( 2048,   512,  8,  2,  1, 1024,  0, 30,1024,64, 30),
+	MARVELL_LAYOUT( 2048,   512,  12, 3,  2, 704,   0, 30,640,  0, 30),
+	MARVELL_LAYOUT( 2048,   512,  16, 5,  4, 512,   0, 30,  0, 32, 30),
 	MARVELL_LAYOUT( 4096,   512,  4,  2,  2, 2048, 32, 30,  0,  0,  0),
 	MARVELL_LAYOUT( 4096,   512,  8,  5,  4, 1024,  0, 30,  0, 64, 30),
+	MARVELL_LAYOUT( 4096,   512,  12, 6,  5, 704,   0, 30,576, 32, 30),
+	MARVELL_LAYOUT( 4096,   512,  16, 9,  8, 512,   0, 30,  0, 32, 30),
 	MARVELL_LAYOUT( 8192,   512,  4,  4,  4, 2048,  0, 30,  0,  0,  0),
 	MARVELL_LAYOUT( 8192,   512,  8,  9,  8, 1024,  0, 30,  0, 160, 30),
+	MARVELL_LAYOUT( 8192,   512,  12, 12, 11, 704,  0, 30,448,  64, 30),
+	MARVELL_LAYOUT( 8192,   512,  16, 17, 16, 512,  0, 30,  0,  32, 30),
 };
 
 /**
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index c3cc66039925..a6af521832aa 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -1208,6 +1208,73 @@ static int nand_lp_exec_read_page_op(struct nand_chip *chip, unsigned int page,
 	return nand_exec_op(chip, &op);
 }
 
+static int nand_lp_exec_cont_read_page_op(struct nand_chip *chip, unsigned int page,
+					  unsigned int offset_in_page, void *buf,
+					  unsigned int len, bool check_only)
+{
+	const struct nand_interface_config *conf =
+		nand_get_interface_config(chip);
+	u8 addrs[5];
+	struct nand_op_instr start_instrs[] = {
+		NAND_OP_CMD(NAND_CMD_READ0, 0),
+		NAND_OP_ADDR(4, addrs, 0),
+		NAND_OP_CMD(NAND_CMD_READSTART, NAND_COMMON_TIMING_NS(conf, tWB_max)),
+		NAND_OP_WAIT_RDY(NAND_COMMON_TIMING_MS(conf, tR_max), 0),
+		NAND_OP_CMD(NAND_CMD_READCACHESEQ, NAND_COMMON_TIMING_NS(conf, tWB_max)),
+		NAND_OP_WAIT_RDY(NAND_COMMON_TIMING_MS(conf, tR_max),
+				 NAND_COMMON_TIMING_NS(conf, tRR_min)),
+		NAND_OP_DATA_IN(len, buf, 0),
+	};
+	struct nand_op_instr cont_instrs[] = {
+		NAND_OP_CMD(page == chip->cont_read.last_page ?
+			    NAND_CMD_READCACHEEND : NAND_CMD_READCACHESEQ,
+			    NAND_COMMON_TIMING_NS(conf, tWB_max)),
+		NAND_OP_WAIT_RDY(NAND_COMMON_TIMING_MS(conf, tR_max),
+				 NAND_COMMON_TIMING_NS(conf, tRR_min)),
+		NAND_OP_DATA_IN(len, buf, 0),
+	};
+	struct nand_operation start_op = NAND_OPERATION(chip->cur_cs, start_instrs);
+	struct nand_operation cont_op = NAND_OPERATION(chip->cur_cs, cont_instrs);
+	int ret;
+
+	if (!len) {
+		start_op.ninstrs--;
+		cont_op.ninstrs--;
+	}
+
+	ret = nand_fill_column_cycles(chip, addrs, offset_in_page);
+	if (ret < 0)
+		return ret;
+
+	addrs[2] = page;
+	addrs[3] = page >> 8;
+
+	if (chip->options & NAND_ROW_ADDR_3) {
+		addrs[4] = page >> 16;
+		start_instrs[1].ctx.addr.naddrs++;
+	}
+
+	/* Check if cache reads are supported */
+	if (check_only) {
+		if (nand_check_op(chip, &start_op) || nand_check_op(chip, &cont_op))
+			return -EOPNOTSUPP;
+
+		return 0;
+	}
+
+	if (page == chip->cont_read.first_page)
+		return nand_exec_op(chip, &start_op);
+	else
+		return nand_exec_op(chip, &cont_op);
+}
+
+static bool rawnand_cont_read_ongoing(struct nand_chip *chip, unsigned int page)
+{
+	return chip->cont_read.ongoing &&
+		page >= chip->cont_read.first_page &&
+		page <= chip->cont_read.last_page;
+}
+
 /**
  * nand_read_page_op - Do a READ PAGE operation
  * @chip: The NAND chip
@@ -1233,10 +1300,16 @@ int nand_read_page_op(struct nand_chip *chip, unsigned int page,
 		return -EINVAL;
 
 	if (nand_has_exec_op(chip)) {
-		if (mtd->writesize > 512)
-			return nand_lp_exec_read_page_op(chip, page,
-							 offset_in_page, buf,
-							 len);
+		if (mtd->writesize > 512) {
+			if (rawnand_cont_read_ongoing(chip, page))
+				return nand_lp_exec_cont_read_page_op(chip, page,
+								      offset_in_page,
+								      buf, len, false);
+			else
+				return nand_lp_exec_read_page_op(chip, page,
+								 offset_in_page, buf,
+								 len);
+		}
 
 		return nand_sp_exec_read_page_op(chip, page, offset_in_page,
 						 buf, len);
@@ -3353,6 +3426,27 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
 	return NULL;
 }
 
+static void rawnand_enable_cont_reads(struct nand_chip *chip, unsigned int page,
+				      u32 readlen, int col)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+
+	if (!chip->controller->supported_op.cont_read)
+		return;
+
+	if ((col && col + readlen < (3 * mtd->writesize)) ||
+	    (!col && readlen < (2 * mtd->writesize))) {
+		chip->cont_read.ongoing = false;
+		return;
+	}
+
+	chip->cont_read.ongoing = true;
+	chip->cont_read.first_page = page;
+	if (col)
+		chip->cont_read.first_page++;
+	chip->cont_read.last_page = page + ((readlen >>