Merge tag 'pinctrl-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.12 kernel.

  This time a calm set with no core changes.

  New drivers/subdrivers:

   - Renesas R8A7790A0 pin controller.

   - Allwinner H616 and H616-R pin controllers.

   - Qualcomm SM8350 and SC8180x pin controllers.

  Improvements:

   - Redo the DT bindings for Ralink RT2880.

   - A common Qualcomm TLMM DT binding in YAML.

   - Delete the unused drivers for U300, COH901, Sirf Atlas, and ZTE ZX"

* tag 'pinctrl-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (71 commits)
  pinctrl: mediatek: Fix trigger type setting follow for unexpected interrupt
  dt-bindings: pinctrl: Group tuples in pin control properties
  pinctrl: nuvoton: npcm7xx: Fix alignment of table header comment
  pinctrl: at91-pio4: fix "Prefer 'unsigned int' to bare use of 'unsigned'"
  pinctrl: at91-pio4: add support for slew-rate
  dt-bindings: pinctrl: at91-pio4: add slew-rate
  pinctrl: actions: Add depends on || COMPILE_TEST
  pinctrl: single: set function name when adding function
  pinctrl: qcom: Add sc8180x TLMM driver
  dt-bindings: pinctrl: qcom: Add sc8180x binding
  dt-bindings: pinctrl: qcom: Define common TLMM binding
  pinctrl: qcom: Add SM8350 pinctrl driver
  dt-bindings: pinctrl: qcom: Add SM8350 pinctrl bindings
  pinctrl: samsung: use raw_spinlock for s3c64xx
  dt-bindings: mediatek: mt8192: Fix dt_binding_check warning
  pinctrl: qcom: spmi-mpp: Add PM8019 compatible
  pinctrl: pinmux: add function selector to pinmux-functions
  pinctrl: samsung: use raw_spinlock for locking
  pinctrl: clarify #pinctrl-cells for pinctrl-single,pins
  pinctrl: actions: Add the platform dependency to drivers
  ...

88 files changed, 9220 insertions, 13458 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-atlas7.txt b/Documentation/devicetree/bindings/gpio/gpio-atlas7.txt
deleted file mode 100644
index d7e123fc90b5..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-atlas7.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-CSR SiRFatlas7 GPIO controller bindings
-
-Required properties:
-- compatible	: "sirf,atlas7-gpio"
-- reg		: Address range of the pinctrl registers
-- interrupts	: Interrupts used by every GPIO group
-- gpio-banks	: How many gpio banks on this controller
-- gpio-controller : Indicates this device is a GPIO controller
-- interrupt-controller  : Marks the device node as an interrupt controller
-
-The GPIO controller also acts as an interrupt controller. It uses the default
-two cells specifier as described in Documentation/devicetree/bindings/
-interrupt-controller/interrupts.txt.
-
-Example:
-
-	gpio_0: gpio_mediam@17040000 {
-		compatible = "sirf,atlas7-gpio";
-		reg = <0x17040000 0x1000>;
-		interrupts = <0 13 0>, <0 14 0>;
-
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-
-		gpio-controller;
-		interrupt-controller;
-
-		gpio-banks = <2>;
-		gpio-ranges = <&pinctrl 0 0 0>,
-				<&pinctrl 32 0 0>;
-		gpio-ranges-group-names = "lvds_gpio_grp",
-					"uart_nand_gpio_grp";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			gpios = <&gpio_1 15 0>;
-			...
-		};
-
-		led2 {
-			gpios = <&gpio_2 34 0>;
-			...
-		};
-	};
-
-Please refer to gpio.txt in this directory for details of the common
-gpio properties used by devices.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt b/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt
deleted file mode 100644
index fd665b44d767..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-ST-Ericsson COH 901 571/3 GPIO controller
-
-Required properties:
-- compatible: Compatible property value should be "stericsson,gpio-coh901"
-- reg: Physical base address of the controller and length of memory mapped
-  region.
-- interrupts: the 0...n interrupts assigned to the different GPIO ports/banks.
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
index 5240487dfe50..cce63c3cc463 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -53,6 +53,8 @@ properties:
       - allwinner,sun50i-h5-pinctrl
       - allwinner,sun50i-h6-pinctrl
       - allwinner,sun50i-h6-r-pinctrl
+      - allwinner,sun50i-h616-pinctrl
+      - allwinner,sun50i-h616-r-pinctrl
       - allwinner,suniv-f1c100s-pinctrl
       - nextthing,gr8-pinctrl
 
@@ -61,7 +63,7 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 7
+    maxItems: 8
     description:
       One interrupt per external interrupt bank supported on the
       controller, sorted by bank number ascending order.
@@ -91,7 +93,7 @@ properties:
       bank found in the controller
     $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
-    maxItems: 5
+    maxItems: 8
 
 patternProperties:
   # It's pretty scary, but the basic idea is that:
@@ -149,6 +151,17 @@ allOf:
       properties:
         compatible:
           enum:
+            - allwinner,sun50i-h616-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 8
+
+  - if:
+      properties:
+        compatible:
+          enum:
             - allwinner,sun50i-a100-pinctrl
 
     then:
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
index 265015bc0603..e2b861ce16d8 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -35,9 +35,11 @@ ioset settings. Use the macros from boot/dts/<soc>-pinfunc.h file to get the
 right representation of the pin.
 
 Optional properties:
-- GENERIC_PINCONFIG: generic pinconfig options to use, bias-disable,
-bias-pull-down, bias-pull-up, drive-open-drain, input-schmitt-enable,
-input-debounce, output-low, output-high.
+- GENERIC_PINCONFIG: generic pinconfig options to use:
+	- bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
+	  input-schmitt-enable, input-debounce, output-low, output-high.
+	- for microchip,sama7g5-pinctrl only:
+		- slew-rate: 0 - disabled, 1 - enabled (default)
 - atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for
 high drive. The default value is low drive.
 
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
index e295dda4bbba..40e0a9a19525 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
@@ -39,7 +39,7 @@ For example:
 		      <0x660009b0 0x40>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&nand_sel &uart3_rx &sdio0_d4>;
+		pinctrl-0 = <&nand_sel>, <&uart3_rx>, <&sdio0_d4>;
 
 		/* Select nand function */
 		nand_sel: nand_sel {
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
index 603564e5fe6f..dede11e4ef78 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
@@ -30,7 +30,7 @@ For example:
 		      <0x1803f408 0x04>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&pwm &gpio_b &nand_sel>;
+		pinctrl-0 = <&pwm>, <&gpio_b>, <&nand_sel>;
 
 		pwm: pwm {
 			function = "pwm";
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
index 8ac1d0851a0f..bfab5ca49fd1 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
@@ -60,7 +60,7 @@ iomuxc-lpsr controller and SDA pad from iomuxc controller as:
 
 i2c1: i2c@30a20000 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1 &pinctrl_i2c1_2>;
+	pinctrl-0 = <&pinctrl_i2c1_1>, <&pinctrl_i2c1_2>;
 };
 
 iomuxc-lpsr@302c0000 {
diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
index df0c83cb1c6e..4fe35e650909 100644
--- a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
@@ -99,8 +99,8 @@ patternProperties:
 
       '#interrupt-cells':
         description:
-         Specifies the pin (port and bit) and flags, as defined in
-         defined in include/dt-bindings/interrupt-controller/irq.h
+          Specifies the pin (port and bit) and flags, as defined in
+          defined in include/dt-bindings/interrupt-controller/irq.h
         const: 3
 
       ngpios:
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt
deleted file mode 100644
index fbdd1a716a1e..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt
+++ /dev/null
@@ -1,109 +0,0 @@
-CSR SiRFatlas7 pinmux controller
-
-Required properties:
-- compatible	: "sirf,atlas7-ioc"
-- reg		: Address range of the pinctrl registers
-
-For example, pinctrl might have properties like the following:
-	pinctrl: ioc@18880000 {
-			compatible = "sirf,atlas7-ioc";
-			reg = <0x18880000 0x1000>;
-
-			a_ac97_pmx: ac97@0 {
-				ac97 {
-					groups = "audio_ac97_grp";
-					function = "audio_ac97";
-				};
-			};
-
-			...
-
-			sd2_pmx: sd2@0 {
-				sd2 {
-					groups = "sd2_grp0";
-					function = "sd2";
-				};
-			};
-
-			...
-
-
-			sample0_cfg: sample0@0 {
-				sample0 {
-					pins = "ldd_0", "ldd_1";
-					bias-pull-up;
-				};
-			};
-
-			sample1_cfg: sample1@0 {
-				sample1 {
-					pins = "ldd_2", "ldd_3";
-					input-schmitt-enable;
-				};
-			};
-
-			sample2_cfg: sample2@0 {
-				sample2 {
-					groups = "uart4_nopause_grp";
-					bias-pull-down;
-				};
-			};
-
-			sample3_cfg: sample3@0 {
-				sample3 {
-					pins = "ldd_4", "ldd_5";
-					drive-strength = <2>;
-				};
-			};
-	};
-
-Please refer to pinctrl-bindings.txt in this directory for details of the common
-pinctrl bindings used by client devices.
-
-SiRFatlas7's pinmux nodes act as a container for an arbitrary number of subnodes.
-Each of these subnodes represents some desired configuration for a group of pins.
-
-Required subnode-properties:
-- groups : An array of strings. Each string contains the name of a group.
-- function: A string containing the name of the function to mux to the
-  group.
-
-  Valid values for group and function names can be found from looking at the
-  group and function arrays in driver files:
-  drivers/pinctrl/pinctrl-sirf.c
-
-For example, pinctrl might have subnodes like the following:
-	sd0_pmx: sd0@0 {
-		sd0 {
-			groups = "sd0_grp";