Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull more MIPS updates from Ralf Baechle:
 "This is the secondnd batch of MIPS patches for 4.7. Summary:

  CPS:
   - Copy EVA configuration when starting secondary VPs.

  EIC:
   - Clear Status IPL.

  Lasat:
   - Fix a few off by one bugs.

  lib:
   - Mark intrinsics notrace.  Not only are the intrinsics
     uninteresting, it would cause infinite recursion.

  MAINTAINERS:
   - Add file patterns for MIPS BRCM device tree bindings.
   - Add file patterns for mips device tree bindings.

  MT7628:
   - Fix MT7628 pinmux typos.
   - wled_an pinmux gpio.
   - EPHY LEDs pinmux support.

  Pistachio:
   - Enable KASLR

  VDSO:
   - Build microMIPS VDSO for microMIPS kernels.
   - Fix aliasing warning by building with `-fno-strict-aliasing' for
     debugging but also tracing them might result in recursion.

  Misc:
   - Add missing FROZEN hotplug notifier transitions.
   - Fix clk binding example for varioius PIC32 devices.
   - Fix cpu interrupt controller node-names in the DT files.
   - Fix XPA CPU feature separation.
   - Fix write_gc0_* macros when writing zero.
   - Add inline asm encoding helpers.
   - Add missing VZ accessor microMIPS encodings.
   - Fix little endian microMIPS MSA encodings.
   - Add 64-bit HTW fields and fix its configuration.
   - Fix sigreturn via VDSO on microMIPS kernel.
   - Lots of typo fixes.
   - Add definitions of SegCtl registers and use them"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits)
  MIPS: Add missing FROZEN hotplug notifier transitions
  MIPS: Build microMIPS VDSO for microMIPS kernels
  MIPS: Fix sigreturn via VDSO on microMIPS kernel
  MIPS: devicetree: fix cpu interrupt controller node-names
  MIPS: VDSO: Build with `-fno-strict-aliasing'
  MIPS: Pistachio: Enable KASLR
  MIPS: lib: Mark intrinsics notrace
  MIPS: Fix 64-bit HTW configuration
  MIPS: Add 64-bit HTW fields
  MAINTAINERS: Add file patterns for mips device tree bindings
  MAINTAINERS: Add file patterns for mips brcm device tree bindings
  MIPS: Simplify DSP instruction encoding macros
  MIPS: Add missing tlbinvf/XPA microMIPS encodings
  MIPS: Fix little endian microMIPS MSA encodings
  MIPS: Add missing VZ accessor microMIPS encodings
  MIPS: Add inline asm encoding helpers
  MIPS: Spelling fix lets -> let's
  MIPS: VR41xx: Fix typo
  MIPS: oprofile: Fix typo
  MIPS: math-emu: Fix typo
  ...

67 files changed, 373 insertions, 258 deletions

diff --git a/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt b/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt
index ef3752889496..dd031fc93b55 100644
--- a/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt
@@ -33,7 +33,7 @@ gpio0: gpio0@1f860000 {
 	gpio-controller;
 	interrupt-controller;
 	#interrupt-cells = <2>;
-	clocks = <&PBCLK4>;
+	clocks = <&rootclk PB4CLK>;
 	microchip,gpio-bank = <0>;
 	gpio-ranges = <&pic32_pinctrl 0 0 16>;
 };
diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt b/Documentation/devicetree/bindings/mips/cpu_irq.txt
index fc149f326dae..f080f06da6d8 100644
--- a/Documentation/devicetree/bindings/mips/cpu_irq.txt
+++ b/Documentation/devicetree/bindings/mips/cpu_irq.txt
@@ -13,7 +13,7 @@ Required properties:
 - compatible : Should be "mti,cpu-interrupt-controller"
 
 Example devicetree:
-	cpu-irq: cpu-irq@0 {
+	cpu-irq: cpu-irq {
 		#address-cells = <0>;
 
 		interrupt-controller;
diff --git a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
index 71ad57e050b1..3149297b3933 100644
--- a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
+++ b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
@@ -20,7 +20,7 @@ Example:
 		compatible = "microchip,pic32mzda-sdhci";
 		reg = <0x1f8ec000 0x100>;
 		interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&REFCLKO4>, <&PBCLK5>;
+		clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>;
 		clock-names = "base_clk", "sys_clk";
 		bus-width = <4>;
 		cap-sd-highspeed;
diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,pic32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/microchip,pic32-pinctrl.txt
index 4b5efa51bec7..29b72e303ebf 100644
--- a/Documentation/devicetree/bindings/pinctrl/microchip,pic32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/microchip,pic32-pinctrl.txt
@@ -34,7 +34,7 @@ pic32_pinctrl: pinctrl@1f801400{
 	#size-cells = <1>;
 	compatible = "microchip,pic32mzda-pinctrl";
 	reg = <0x1f801400 0x400>;
-	clocks = <&PBCLK1>;
+	clocks = <&rootclk PB1CLK>;
 
 	pinctrl_uart2: pinctrl_uart2 {
 		uart2-tx {
diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
index 65b38bf60ae0..7a34345d0ca3 100644
--- a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
+++ b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
@@ -20,7 +20,7 @@ Example:
 		interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
 			<113 IRQ_TYPE_LEVEL_HIGH>,
 			<114 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&PBCLK2>;
+		clocks = <&rootclk PB2CLK>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_uart1
 				&pinctrl_uart1_cts
diff --git a/Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt b/Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt
index 852f694f3177..49485f831373 100644
--- a/Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt
+++ b/Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt
@@ -8,12 +8,12 @@ Required properties:
 - compatible: must be "microchip,pic32mzda-dmt".
 - reg: physical base address of the controller and length of memory mapped
   region.
-- clocks: phandle of parent clock (should be &PBCLK7).
+- clocks: phandle of source clk. Should be <&rootclk PB7CLK>.
 
 Example:
 
 	watchdog@1f800a00 {
 		compatible = "microchip,pic32mzda-dmt";
 		reg = <0x1f800a00 0x80>;
-		clocks = <&PBCLK7>;
+		clocks = <&rootclk PB7CLK>;
 	};
diff --git a/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt b/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt
index d1401030e75c..f03a29a1b323 100644
--- a/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt
@@ -7,12 +7,12 @@ Required properties:
 - compatible: must be "microchip,pic32mzda-wdt".
 - reg: physical base address of the controller and length of memory mapped
   region.
-- clocks: phandle of source clk. should be <&LPRC> clk.
+- clocks: phandle of source clk. Should be <&rootclk LPRCCLK>.
 
 Example:
 
 	watchdog@1f800800 {
 		compatible = "microchip,pic32mzda-wdt";
 		reg = <0x1f800800 0x200>;
-		clocks = <&LPRC>;
+		clocks = <&rootclk LPRCCLK>;
 	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 216165a1384d..7304d2e37a98 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2505,6 +2505,7 @@ M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
 L:	linux-mips@linux-mips.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/mips/brcm/
 F:	arch/mips/bcm47xx/*
 F:	arch/mips/include/asm/mach-bcm47xx/*
 
@@ -7521,6 +7522,7 @@ W:	http://www.linux-mips.org/
 T:	git git://git.linux-mips.org/pub/scm/ralf/linux.git
 Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
 S:	Supported
+F:	Documentation/devicetree/bindings/mips/
 F:	Documentation/mips/
 F:	arch/mips/
 
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 46938847e794..ac91939b9b75 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -398,6 +398,7 @@ config MACH_PISTACHIO
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_MIPS_CPS
 	select SYS_SUPPORTS_MULTITHREADING
+	select SYS_SUPPORTS_RELOCATABLE
 	select SYS_SUPPORTS_ZBOOT
 	select SYS_HAS_EARLY_PRINTK
 	select USE_GENERIC_EARLY_PRINTK_8250
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index 4a9c8f2a72d6..f6ae6ed9c4b1 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -5,7 +5,7 @@
 	#size-cells = <1>;
 	compatible = "ingenic,jz4740";
 
-	cpuintc: interrupt-controller@0 {
+	cpuintc: interrupt-controller {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
diff --git a/arch/mips/boot/dts/ralink/mt7620a.dtsi b/arch/mips/boot/dts/ralink/mt7620a.dtsi
index 08bf24fefe9f..793c0c7ca921 100644
--- a/arch/mips/boot/dts/ralink/mt7620a.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7620a.dtsi
@@ -9,7 +9,7 @@
 		};
 	};
 
-	cpuintc: cpuintc@0 {
+	cpuintc: cpuintc {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
diff --git a/arch/mips/boot/dts/ralink/rt2880.dtsi b/arch/mips/boot/dts/ralink/rt2880.dtsi
index 182afde2f2e1..fb2faef0ab79 100644
--- a/arch/mips/boot/dts/ralink/rt2880.dtsi
+++ b/arch/mips/boot/dts/ralink/rt2880.dtsi
@@ -9,7 +9,7 @@
 		};
 	};
 
-	cpuintc: cpuintc@0 {
+	cpuintc: cpuintc {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
diff --git a/arch/mips/boot/dts/ralink/rt3050.dtsi b/arch/mips/boot/dts/ralink/rt3050.dtsi
index e3203d414fee..d3cb57f985da 100644
--- a/arch/mips/boot/dts/ralink/rt3050.dtsi
+++ b/arch/mips/boot/dts/ralink/rt3050.dtsi
@@ -9,7 +9,7 @@
 		};
 	};
 
-	cpuintc: cpuintc@0 {
+	cpuintc: cpuintc {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
diff --git a/arch/mips/boot/dts/ralink/rt3883.dtsi b/arch/mips/boot/dts/ralink/rt3883.dtsi
index 3b131dd0d5ac..3d6fc9afdaf6 100644
--- a/arch/mips/boot/dts/ralink/rt3883.dtsi
+++ b/arch/mips/boot/dts/ralink/rt3883.dtsi
@@ -9,7 +9,7 @@
 		};
 	};
 
-	cpuintc: cpuintc@0 {
+	cpuintc: cpuintc {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
index 686ebd11386d..48d21127c3f3 100644
--- a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
+++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
@@ -10,7 +10,7 @@
 		reg = <0x0 0x08000000>;
 	};
 
-	cpuintc: interrupt-controller@0 {
+	cpuintc: interrupt-controller {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index dff88aa7e377..33aab89259f3 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -384,7 +384,7 @@ static int octeon_cpu_callback(struct notifier_block *nfb,
 {
 	unsigned int cpu = (unsigned long)hcpu;
 
-	switch (action) {
+	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_UP_PREPARE:
 		octeon_update_boot_vector(cpu);
 		break;
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index 6741673c92ca..56584a659183 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -19,6 +19,28 @@
 #include <asm/asmmacro-64.h>
 #endif
 
+/*
+ * Helper macros for generating raw instruction encodings.
+ */
+#ifdef CONFIG_CPU_MICROMIPS
+	.macro	insn32_if_mm enc
+	.insn
+	.hword ((\enc) >> 16)
+	.hword ((\enc) & 0xffff)
+	.endm
+
+	.macro	insn_if_mips enc
+	.endm
+#else
+	.macro	insn32_if_mm enc
+	.endm
+
+	.macro	insn_if_mips enc
+	.insn
+	.word (\enc)
+	.endm
+#endif
+
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	.macro	local_irq_enable reg=t0
 	ei
@@ -341,38 +363,6 @@
 	.endm
 #else
 
-#ifdef CONFIG_CPU_MICROMIPS
-#define CFC_MSA_INSN		0x587e0056
-#define CTC_MSA_INSN		0x583e0816
-#define LDB_MSA_INSN		0x58000807
-#define LDH_MSA_INSN		0x58000817
-#define LDW_MSA_INSN		0x58000827
-#define LDD_MSA_INSN		0x58000837
-#define STB_MSA_INSN		0x5800080f
-#define STH_MSA_INSN		0x5800081f
-#define STW_MSA_INSN		0x5800082f
-#define STD_MSA_INSN		0x5800083f
-#define COPY_SW_MSA_INSN	0x58b00056
-#define COPY_SD_MSA_INSN	0x58b80056
-#define INSERT_W_MSA_INSN	0x59300816
-#define INSERT_D_MSA_INSN	0x59380816
-#else
-#define CFC_MSA_INSN		0x787e0059
-#define CTC_MSA_INSN		0x783e0819
-#define LDB_MSA_INSN		0x78000820
-#define LDH_MSA_INSN		0x78000821
-#define LDW_MSA_INSN		0x78000822
-#define LDD_MSA_INSN		0x78000823
-#define STB_MSA_INSN		0x78000824
-#define STH_MSA_INSN		0x78000825
-#define STW_MSA_INSN		0x78000826
-#define STD_MSA_INSN		0x78000827
-#define COPY_SW_MSA_INSN	0x78b00059
-#define COPY_SD_MSA_INSN	0x78b80059
-#define INSERT_W_MSA_INSN	0x79300819
-#define INSERT_D_MSA_INSN	0x79380819
-#endif
-
 	/*
 	 * Temporary until all toolchains in use include MSA support.
 	 */
@@ -380,8 +370,8 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	.insn
-	.word	CFC_MSA_INSN | (\cs << 11)
+	insn_if_mips 0x787e0059 | (\cs << 11)
+	insn32_if_mm 0x587e0056 | (\cs << 11)
 	move	\rd, $1
 	.set	pop
 	.endm
@@ -391,7 +381,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	move	$1, \rs
-	.word	CTC_MSA_INSN | (\cd << 6)
+	insn_if_mips 0x783e0819 | (\cd << 6)
+	insn32_if_mm 0x583e0816 | (\cd << 6)
 	.set	pop
 	.endm
 
@@ -400,7 +391,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	LDB_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000820 | (\wd << 6)
+	insn32_if_mm 0x58000807 | (\wd << 6)
 	.set	pop
 	.endm
 
@@ -409,7 +401,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	LDH_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000821 | (\wd << 6)
+	insn32_if_mm 0x58000817 | (\wd << 6)
 	.set	pop
 	.endm
 
@@ -418,7 +411,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	LDW_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000822 | (\wd << 6)
+	insn32_if_mm 0x58000827 | (\wd << 6)
 	.set	pop
 	.endm
 
@@ -427,7 +421,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	LDD_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000823 | (\wd << 6)
+	insn32_if_mm 0x58000837 | (\wd << 6)
 	.set	pop
 	.endm
 
@@ -436,7 +431,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	STB_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000824 | (\wd << 6)
+	insn32_if_mm 0x5800080f | (\wd << 6)
 	.set	pop
 	.endm
 
@@ -445,7 +441,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	STH_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000825 | (\wd << 6)
+	insn32_if_mm 0x5800081f | (\wd << 6)
 	.set	pop
 	.endm
 
@@ -454,7 +451,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	STW_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000826 | (\wd << 6)
+	insn32_if_mm 0x5800082f | (\wd << 6)
 	.set	pop
 	.endm
 
@@ -463,7 +461,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	STD_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000827 | (\wd << 6)
+	insn32_if_mm 0x5800083f | (\wd << 6)
 	.set	pop
 	.endm
 
@@ -471,8 +470,8 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	.insn
-	.word	COPY_SW_MSA_INSN | (\n << 16) | (\ws << 11)
+	insn_if_mips 0x78b00059 | (\n << 16) | (\ws << 11)
+	insn32_if_mm 0x58b00056 | (\n << 16) | (\ws << 11)
 	.set	pop
 	.endm
 
@@ -480,8 +479,8 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	.insn
-	.word	COPY_SD_MSA_INSN | (\n << 16) | (\ws << 11)
+	insn_if_mips 0x78b80059 | (\n << 16) | (\ws << 11)
+	insn32_if_mm 0x58b80056 | (\n << 16) | (\ws << 11)
 	.set	pop
 	.endm
 
@@ -489,7 +488,8 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	.word	INSERT_W_MSA_INSN | (\n << 16) | (\wd << 6)
+	insn_if_mips 0x79300819 | (\n << 16) | (\wd << 6)
+	insn32_if_mm 0x59300816 | (\n << 16) | (\wd << 6)
 	.set	pop
 	.endm
 
@@ -497,7 +497,8 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	.word	INSERT_D_MSA_INSN | (\n << 16) | (\wd << 6)
+	insn_if_mips 0x79380819 | (\n << 16) | (\wd << 6)
+	insn32_if_mm 0x59380816 | (\n << 16) | (\wd << 6)