hwmon: Driver for NCT6683D

Nuvoton NCT6683D is an eSIO with hardware monitoring capabilities.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

4 files changed, 1523 insertions, 0 deletions

diff --git a/Documentation/hwmon/nct6683 b/Documentation/hwmon/nct6683
new file mode 100644
index 000000000000..c1301d4300cd
--- /dev/null
+++ b/Documentation/hwmon/nct6683
@@ -0,0 +1,57 @@
+Kernel driver nct6683
+=====================
+
+Supported chips:
+  * Nuvoton NCT6683D
+    Prefix: 'nct6683'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: Available from Nuvoton upon request
+
+Authors:
+        Guenter Roeck <linux@roeck-us.net>
+
+Description
+-----------
+
+This driver implements support for the Nuvoton NCT6683D eSIO chip.
+
+The chips implement up to shared 32 temperature and voltage sensors.
+It supports up to 16 fan rotation sensors and up to 8 fan control engines.
+
+Temperatures are measured in degrees Celsius. Measurement resolution is
+0.5 degrees C.
+
+Voltage sensors (also known as IN sensors) report their values in millivolts.
+
+Fan rotation speeds are reported in RPM (rotations per minute).
+
+Usage Note
+----------
+
+Limit register locations on Intel boards with EC firmware version 1.0
+build date 04/03/13 do not match the register locations in the Nuvoton
+datasheet. Nuvoton confirms that Intel uses a special firmware version
+with different register addresses. The specification describing the Intel
+firmware is held under NDA by Nuvoton and Intel and not available
+to the public.
+
+Some of the register locations can be reverse engineered; others are too
+well hidden. Given this, writing any values from the operating system is
+considered too risky with this firmware and has been disabled. All limits
+must all be written from the BIOS.
+
+The driver has only been tested with the Intel firmware, and by default
+only instantiates on Intel boards. To enable it on non-Intel boards,
+set the 'force' module parameter to 1.
+
+Tested Boards and Firmware Versions
+-----------------------------------
+
+The driver has been reported to work with the following boards and
+firmware versions.
+
+Board		Firmware version
+---------------------------------------------------------------
+Intel DH87RL	NCT6683D EC firmware version 1.0 build 04/03/13
+Intel DH87MC	NCT6683D EC firmware version 1.0 build 04/03/13
+Intel DB85FL	NCT6683D EC firmware version 1.0 build 04/03/13
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index bc196f49ec53..b7c0b830d9e4 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1065,6 +1065,16 @@ config SENSORS_NTC_THERMISTOR
 	  This driver can also be built as a module.  If so, the module
 	  will be called ntc-thermistor.
 
+config SENSORS_NCT6683
+	tristate "Nuvoton NCT6683D"
+	depends on !PPC
+	help
+	  If you say yes here you get support for the hardware monitoring
+	  functionality of the Nuvoton NCT6683D eSIO chip.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called nct6683.
+
 config SENSORS_NCT6775
 	tristate "Nuvoton NCT6775F and compatibles"
 	depends on !PPC
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index c48f9873ac73..11798ad7e801 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -114,6 +114,7 @@ obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
 obj-$(CONFIG_SENSORS_MAX6697)	+= max6697.o
 obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
 obj-$(CONFIG_SENSORS_MCP3021)	+= mcp3021.o
+obj-$(CONFIG_SENSORS_NCT6683)	+= nct6683.o
 obj-$(CONFIG_SENSORS_NCT6775)	+= nct6775.o
 obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
diff --git a/drivers/hwmon/nct6683.c b/drivers/hwmon/nct6683.c
new file mode 100644
index 000000000000..540c81c52344
--- /dev/null
+++ b/drivers/hwmon/nct6683.c
@@ -0,0 +1,1455 @@
+/*
+ * nct6683 - Driver for the hardware monitoring functionality of
+ *	     Nuvoton NCT6683D eSIO
+ *
+ * Copyright (C) 2013  Guenter Roeck <linux@roeck-us.net>
+ *
+ * Derived from nct6775 driver
+ * Copyright (C) 2012, 2013  Guenter Roeck <linux@roeck-us.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Supports the following chips:
+ *
+ * Chip        #vin    #fan    #pwm    #temp  chip ID
+ * nct6683d     21(1)   16      8       32(1) 0xc730
+ *
+ * Notes:
+ *	(1) Total number of vin and temp inputs is 32.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+enum kinds { nct6683 };
+
+static bool force;
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Set to one to enable detection on non-Intel boards");
+
+static const char * const nct6683_device_names[] = {
+	"nct6683",
+};
+
+static const char * const nct6683_chip_names[] = {
+	"NCT6683D",
+};
+
+#define DRVNAME "nct6683"
+
+/*
+ * Super-I/O constants and functions
+ */
+
+#define NCT6683_LD_ACPI		0x0a
+#define NCT6683_LD_HWM		0x0b
+#define NCT6683_LD_VID		0x0d
+
+#define SIO_REG_LDSEL		0x07	/* Logical device select */
+#define SIO_REG_DEVID		0x20	/* Device ID (2 bytes) */
+#define SIO_REG_ENABLE		0x30	/* Logical device enable */
+#define SIO_REG_ADDR		0x60	/* Logical device address (2 bytes) */
+
+#define SIO_NCT6681_ID		0xb270	/* for later */
+#define SIO_NCT6683_ID		0xc730
+#define SIO_ID_MASK		0xFFF0
+
+static inline void
+superio_outb(int ioreg, int reg, int val)
+{
+	outb(reg, ioreg);
+	outb(val, ioreg + 1);
+}
+
+static inline int
+superio_inb(int ioreg, int reg)
+{
+	outb(reg, ioreg);
+	return inb(ioreg + 1);
+}
+
+static inline void
+superio_select(int ioreg, int ld)
+{
+	outb(SIO_REG_LDSEL, ioreg);
+	outb(ld, ioreg + 1);
+}
+
+static inline int
+superio_enter(int ioreg)
+{
+	/*
+	 * Try to reserve <ioreg> and <ioreg + 1> for exclusive access.
+	 */
+	if (!request_muxed_region(ioreg, 2, DRVNAME))
+		return -EBUSY;
+
+	outb(0x87, ioreg);
+	outb(0x87, ioreg);
+
+	return 0;
+}
+
+static inline void
+superio_exit(int ioreg)
+{
+	outb(0xaa, ioreg);
+	outb(0x02, ioreg);
+	outb(0x02, ioreg + 1);
+	release_region(ioreg, 2);
+}
+
+/*
+ * ISA constants
+ */
+
+#define IOREGION_ALIGNMENT	(~7)
+#define IOREGION_OFFSET		4	/* Use EC port 1 */
+#define IOREGION_LENGTH		4
+
+#define EC_PAGE_REG		0
+#define EC_INDEX_REG		1
+#define EC_DATA_REG		2
+#define EC_EVENT_REG		3
+
+/* Common and NCT6683 specific data */
+
+#define NCT6683_NUM_REG_MON		32
+#define NCT6683_NUM_REG_FAN		16
+#define NCT6683_NUM_REG_PWM		8
+
+#define NCT6683_REG_MON(x)		(0x100 + (x) * 2)
+#define NCT6683_REG_FAN_RPM(x)		(0x140 + (x) * 2)
+#define NCT6683_REG_PWM(x)		(0x160 + (x))
+
+#define NCT6683_REG_MON_STS(x)		(0x174 + (x))
+#define NCT6683_REG_IDLE(x)		(0x178 + (x))
+
+#define NCT6683_REG_FAN_STS(x)		(0x17c + (x))
+#define NCT6683_REG_FAN_ERRSTS		0x17e
+#define NCT6683_REG_FAN_INITSTS		0x17f
+
+#define NCT6683_HWM_CFG			0x180
+
+#define NCT6683_REG_MON_CFG(x)		(0x1a0 + (x))
+#define NCT6683_REG_FANIN_CFG(x)	(0x1c0 + (x))
+#define NCT6683_REG_FANOUT_CFG(x)	(0x1d0 + (x))
+
+#define NCT6683_REG_INTEL_TEMP_MAX(x)	(0x901 + (x) * 16)
+#define NCT6683_REG_INTEL_TEMP_CRIT(x)	(0x90d + (x) * 16)
+
+#define NCT6683_REG_TEMP_HYST(x)	(0x330 + (x))		/* 8 bit */
+#define NCT6683_REG_TEMP_MAX(x)		(0x350 + (x))		/* 8 bit */
+#define NCT6683_REG_MON_HIGH(x)		(0x370 + (x) * 2)	/* 8 bit */
+#define NCT6683_REG_MON_LOW(x)		(0x371 + (x) * 2)	/* 8 bit */
+
+#define NCT6683_REG_FAN_MIN(x)		(0x3b8 + (x) * 2)	/* 16 bit */
+
+#define NCT6683_REG_CUSTOMER_ID		0x602
+#define NCT6683_CUSTOMER_ID_INTEL	0x805
+
+#define NCT6683_REG_BUILD_YEAR		0x604
+#define NCT6683_REG_BUILD_MONTH		0x605
+#define NCT6683_REG_BUILD_DAY		0x606
+#define NCT6683_REG_SERIAL		0x607
+#define NCT6683_REG_VERSION_HI		0x608
+#define NCT6683_REG_VERSION_LO		0x609
+
+#define NCT6683_REG_CR_CASEOPEN		0xe8
+#define NCT6683_CR_CASEOPEN_MASK	(1 << 7)
+
+#define NCT6683_REG_CR_BEEP		0xe0
+#define NCT6683_CR_BEEP_MASK		(1 << 6)
+
+static const char *const nct6683_mon_label[] = {
+	NULL,	/* disabled */
+	"Local",
+	"Diode 0 (curr)",
+	"Diode 1 (curr)",
+	"Diode 2 (curr)",
+	"Diode 0 (volt)",
+	"Diode 1 (volt)",
+	"Diode 2 (volt)",
+	"Thermistor 14",
+	"Thermistor 15",
+	"Thermistor 16",
+	"Thermistor 0",
+	"Thermistor 1",
+	"Thermistor 2",
+	"Thermistor 3",
+	"Thermistor 4",
+	"Thermistor 5",		/* 0x10 */
+	"Thermistor 6",
+	"Thermistor 7",
+	"Thermistor 8",
+	"Thermistor 9",
+	"Thermistor 10",
+	"Thermistor 11",
+	"Thermistor 12",
+	"Thermistor 13",
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	"PECI 0.0",		/* 0x20 */
+	"PECI 1.0",
+	"PECI 2.0",
+	"PECI 3.0",
+	"PECI 0.1",
+	"PECI 1.1",
+	"PECI 2.1",
+	"PECI 3.1",
+	"PECI DIMM 0",
+	"PECI DIMM 1",
+	"PECI DIMM 2",
+	"PECI DIMM 3",
+	NULL, NULL, NULL, NULL,
+	"PCH CPU",		/* 0x30 */
+	"PCH CHIP",
+	"PCH CHIP CPU MAX",
+	"PCH MCH",
+	"PCH DIMM 0",
+	"PCH DIMM 1",
+	"PCH DIMM 2",
+	"PCH DIMM 3",
+	"SMBus 0",
+	"SMBus 1",
+	"SMBus 2",
+	"SMBus 3",
+	"SMBus 4",
+	"SMBus 5",
+	"DIMM 0",
+	"DIMM 1",
+	"DIMM 2",		/* 0x40 */
+	"DIMM 3",
+	"AMD TSI Addr 90h",
+	"AMD TSI Addr 92h",
+	"AMD TSI Addr 94h",
+	"AMD TSI Addr 96h",
+	"AMD TSI Addr 98h",
+	"AMD TSI Addr 9ah",
+	"AMD TSI Addr 9ch",
+	"AMD TSI Addr 9dh",
+	NULL, NULL, NULL, NULL, NULL, NULL,
+	"Virtual 0",		/* 0x50 */
+	"Virtual 1",
+	"Virtual 2",
+	"Virtual 3",
+	"Virtual 4",
+	"Virtual 5",
+	"Virtual 6",
+	"Virtual 7",
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	"VCC",			/* 0x60 voltage sensors */
+	"VSB",
+	"AVSB",
+	"VTT",
+	"VBAT",
+	"VREF",
+	"VIN0",
+	"VIN1",
+	"VIN2",
+	"VIN3",
+	"VIN4",
+	"VIN5",
+	"VIN6",
+	"VIN7",
+	"VIN8",
+	"VIN9",
+	"VIN10",
+	"VIN11",
+	"VIN12",
+	"VIN13",
+	"VIN14",
+	"VIN15",
+	"VIN16",
+};
+
+#define NUM_MON_LABELS		ARRAY_SIZE(nct6683_mon_label)
+#define MON_VOLTAGE_START	0x60
+
+/* ------------------------------------------------------- */
+
+struct nct6683_data {
+	int addr;		/* IO base of EC space */
+	int sioreg;		/* SIO register */
+	enum kinds kind;
+	u16 customer_id;
+
+	struct device *hwmon_dev;
+	const struct attribute_group *groups[6];
+
+	int temp_num;			/* number of temperature attributes */
+	u8 temp_index[NCT6683_NUM_REG_MON];
+	u8 temp_src[NCT6683_NUM_REG_MON];
+
+	u8 in_num;			/* number of voltage attributes */
+	u8 in_index[NCT6683_NUM_REG_MON];
+	u8 in_src[NCT6683_NUM_REG_MON];
+
+	struct mutex update_lock;	/* used to protect sensor updates */
+	bool valid;			/* true if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	/* Voltage attribute values */
+	u8 in[3][NCT6683_NUM_REG_MON];	/* [0]=in, [1]=in_max, [2]=in_min */
+
+	/* Temperature attribute values */
+	s16 temp_in[NCT6683_NUM_REG_MON];
+	s8 temp[4][NCT6683_NUM_REG_MON];/* [0]=min, [1]=max, [2]=hyst,
+					 * [3]=crit
+					 */
+
+	/* Fan attribute values */
+	unsigned int rpm[NCT6683_NUM_REG_FAN];
+	u16 fan_min[NCT6683_NUM_REG_FAN];
+	u8 fanin_cfg[NCT6683_NUM_REG_FAN];
+	u8 fanout_cfg[NCT6683_NUM_REG_FAN];
+	u16 have_fan;			/* some fan inputs can be disabled */
+
+	u8 have_pwm;
+	u8 pwm[NCT6683_NUM_REG_PWM];
+
+#ifdef CONFIG_PM
+	/* Remember extra register values over suspend/resume */
+	u8 hwm_cfg;
+#endif
+};
+
+struct nct6683_sio_data {
+	int sioreg;
+	enum kinds kind;
+};
+
+struct sensor_device_template {
+	struct device_attribute dev_attr;
+	union {
+		struct {
+			u8 nr;
+			u8 index;
+		} s;
+		int index;
+	} u;
+	bool s2;	/* true if both index and nr are used */
+};
+
+struct sensor_device_attr_u {
+	union {
+		struct sensor_device_attribute a1;
+		struct sensor_device_attribute_2 a2;
+	} u;
+	char name[32];
+};
+
+#define __TEMPLATE_ATTR(_template, _mode, _show, _store) {	\
+	.attr = {.name = _template, .mode = _mode },		\
+	.show	= _show,					\
+	.store	= _store,					\
+}
+
+#define SENSOR_DEVICE_TEMPLATE(_template, _mode, _show, _store, _index)	\
+	{ .dev_attr = __TEMPLATE_ATTR(_template, _mode, _show, _store),	\
+	  .u.index = _index,						\
+	  .s2 = false }
+
+#define SENSOR_DEVICE_TEMPLATE_2(_template, _mode, _show, _store,	\
+				 _nr, _index)				\
+	{ .dev_attr = __TEMPLATE_ATTR(_template, _mode, _show, _store),	\
+	  .u.s.index = _index,						\
+	  .u.s.nr = _nr,						\
+	  .s2 = true }
+
+#define SENSOR_TEMPLATE(_name, _template, _mode, _show, _store, _index)	\
+static struct sensor_device_template sensor_dev_template_##_name	\
+	= SENSOR_DEVICE_TEMPLATE(_template, _mode, _show, _store,	\
+				 _index)
+
+#define SENSOR_TEMPLATE_2(_name, _template, _mode, _show, _store,	\
+			  _nr, _index)					\
+static struct sensor_device_template sensor_dev_template_##_name	\
+	= SENSOR_DEVICE_TEMPLATE_2(_template, _mode, _show, _store,	\
+				 _nr, _index)
+
+struct sensor_template_group {
+	struct sensor_device_template **templates;
+	umode_t (*is_visible)(struct kobject *, struct attribute *, int);
+	int base;
+};
+
+static struct attribute_group *
+nct6683_create_attr_group(struct device *dev, struct sensor_template_group *tg,
+			  int repeat)
+{
+	struct sensor_device_attribute_2 *a2;
+	struct sensor_device_attribute *a;
+	struct sensor_device_template **t;
+	struct sensor_device_attr_u *su;
+	struct attribute_group *group;
+	struct attribute **attrs;
+	int i, j, count;
+
+	if (repeat <= 0)
+		return ERR_PTR(-EINVAL);
+
+	t = tg->templates;
+	for (count = 0; *t; t++, count++)
+		;
+
+	if (count == 0)
+		return ERR_PTR(-EINVAL);
+
+	group = devm_kzalloc(dev, sizeof(*group), GFP_KERNEL);
+	if (group == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	attrs = devm_kzalloc(dev, sizeof(*attrs) * (repeat * count + 1),
+			     GFP_KERNEL);
+	if (attrs == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	su = devm_kzalloc(dev, sizeof(*su) * repeat * count,
+			  GFP_KERNEL);
+	if (su == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	group->attrs = attrs;
+	group->is_visible = tg->is_visible;
+
+	for (i = 0; i < repeat; i++) {
+		t = tg->templates;
+		for (j = 0; *t != NULL; j++) {
+			snprintf(su->name, sizeof(su->name),
+				 (*t)->dev_attr.attr.name, tg->base + i);
+			if ((*t)->s2) {
+				a2 = &su->u.a2;
+				a2->dev_attr.attr.name = su->name;
+				a2->nr = (*t)->u.s.nr + i;
+				a2->index = (*t)->u.s.index;
+				a2->dev_attr.attr.mode =
+				  (*t)->dev_attr.attr.mode;
+				a2->dev_attr.show = (*t)->dev_attr.show;
+				a2->dev_attr.store = (*t)->dev_attr.store;
+				*attrs = &a2->dev_attr.attr;
+			} else {
+				a = &su->u.a1;
+				a->dev_attr.attr.name = su->name;
+				a->index = (*t)->u.index + i;
+				a->dev_attr.attr.mode =
+				  (*t)->dev_attr.attr.mode;
+				a->dev_attr.show = (*t)->dev_attr.show;
+				a->dev_attr.store = (*t)->dev_attr.store;
+				*attrs = &a->dev_attr.attr;
+			}
+			attrs++;
+			su++;
+			t++;
+		}
+	}
+
+	return group;
+}
+
+/* LSB is 16 mV, except for the following sources, where it is 32 mV */
+#define MON_SRC_VCC	0x60
+#define MON_SRC_VSB	0x61
+#define MON_SRC_AVSB	0x62
+#define MON_SRC_VBAT	0x64
+
+static inline long in_from_reg(u16 reg, u8 src)
+{
+	int scale = 16;
+
+	if (src == MON_SRC_VCC || src == MON_SRC_VSB || src == MON_SRC_AVSB ||
+	    src == MON_SRC_VBAT)
+		scale <<= 1;
+	return reg * scale;
+}
+
+static inline u16 in_to_reg(u32 val, u8 src)
+{
+	int scale = 16;
+
+	if (src == MON_SRC_VCC || src == MON_SRC_VSB || src == MON_SRC_AVSB ||
+	    src == MON_SRC_VBAT)
+		scale <<= 1;
+
+	return clamp_val(DIV_ROUND_CLOSEST(val, scale), 0, 127);
+}
+
+static u16 nct6683_read(struct nct6683_data *data, u16 reg)
+{
+	int res;
+
+	outb_p(0xff, data->addr + EC_PAGE_REG);		/* unlock */
+	outb_p(reg >> 8, data->addr + EC_PAGE_REG);
+	outb_p(reg & 0xff, data->addr + EC_INDEX_REG);
+	res = inb_p(data->addr + EC_DATA_REG);
+	return res;
+}
+
+static u16 nct6683_read16(struct nct6683_data *data, u16 reg)
+{
+	return (nct6683_read(data, reg) << 8) | nct6683_read(data, reg + 1);
+}
+
+static void nct6683_write(struct nct6683_data *data, u16 reg, u16 value)
+{
+	outb_p(0xff, data->addr + EC_PAGE_REG);		/* unlock */
+	outb_p(reg >> 8, data->addr + EC_PAGE_REG);
+	outb_p(reg & 0xff, data->addr + EC_INDEX_REG);
+	outb_p(value & 0xff, data->addr + EC_DATA_REG);
+}
+
+static int get_in_reg(struct nct6683_data *data, int nr, int index)
+{
+	int ch = data->in_index[index];
+	int reg = -EINVAL;
+
+	switch (nr) {
+	case 0:
+		reg = NCT6683_REG_MON(ch);
+		break;
+	case 1:
+		if (data->customer_id != NCT6683_CUSTOMER_ID_INTEL)
+			reg = NCT6683_REG_MON_LOW(ch);
+		break;
+	case 2:
+		if (data->customer_id != NCT6683_CUSTOMER_ID_INTEL)
+			reg = NCT6683_REG_MON_HIGH(ch);
+		break;
+	default:
+		break;
+	}
+	return reg;
+}
+
+static int get_temp_reg(struct nct6683_data *data, int nr, int index)
+{
+	int ch = data->temp_index[index];
+	int reg = -EINVAL;
+
+	switch (data->customer_id) {
+	case NCT6683_CUSTOMER_ID_INTEL:
+		switch (nr) {
+		default:
+		case 1:	/* max */
+			reg = NCT6683_REG_INTEL_TEMP_MAX(ch);
+			break;
+		case 3:	/* crit */
+			reg = NCT6683_REG_INTEL_TEMP_CRIT(ch);
+			break;
+		}
+		break;
+	default:
+		switch (nr) {
+		default:
+		case 0:	/* min */
+			reg = NCT6683_REG_MON_LOW(ch);
+			break;
+		case 1:	/* max */
+			reg = NCT6683_REG_TEMP_MAX(ch);
+			break;
+		case 2:	/* hyst */
+			reg = NCT6683_REG_TEMP_HYST(ch);
+			break;
+		case 3:	/* crit */
+			reg = NCT6683_REG_MON_HIGH(ch);
+			break;
+		}
+		break;
+	}
+	return reg;
+}
+
+static void nct6683_update_pwm(struct device *dev)
+{
+	struct nct6683_data *data = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < NCT6683_NUM_REG_PWM; i++) {
+		if (!(data->have_pwm & (1 << i)))
+			continue;
+		data->pwm[i] = nct6683_read(data, NCT6683_REG_PWM(i));
+	}
+}
+
+static struct nct6683_data *nct6683_update_device(struct device *dev)
+{
+	struct nct6683_data *data = dev_get_drvdata(dev);
+	int i, j;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		/* Measured voltages and limits */
+		for (i = 0; i < data->in_num; i++) {
+			for (j = 0; j < 3; j++) {
+				int reg = get_in_reg(data, j, i);
+
+				if (reg >= 0)
+					data->in[j][i] =
+						nct6683_read(data, reg);
+			}
+		}
+
+		/* Measured temperatures and limits */
+		for (i = 0; i < data->temp_num; i++) {
+			u8 ch = data->temp_index[i];
+
+			data->temp_in[i] = nct6683_read16(data,
+							  NCT6683_REG_MON(ch));
+			for (j = 0; j < 4; j++) {
+				int reg = get_temp_reg(data, j, i);
+
+				if (reg >= 0)
+					data->temp[j][i] =
+						nct6683_read(data, reg);
+			}
+		}
+
+		/* Measured fan speeds and limits */
+		for (i = 0; i < ARRAY_SIZE(data->rpm); i++) {
+			if (!(data->have_fan & (1 << i)))
+				continue;
+
+			data->rpm[i] = nct6683_read16(data,
+						NCT6683_REG_FAN_RPM(i));
+			data->fan_min[i] = nct6683_read16(data,
+						NCT6683_REG_FAN_MIN(i));
+		}
+
+		nct6683_update_pwm(dev);
+
+		data->last_updated = jiffies;
+		data->valid = true;
+	}
+
+	mutex_unlock(&data->update_lock);
+	return data;
+}
+
+/*
+ * Sysfs callback functions
+ */
+static ssize_t
+show_in_label(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+	struct nct6683_data *data = nct6683_update_device(dev);
+	int nr = sattr->index;
+
+	return sprintf(buf, "%s\n", nct6683_mon_label[data->in_src[nr]]);
+}
+
+static ssize_t
+show_in_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct nct6683_data *data = nct6683_update_device(dev);
+	int index = sattr->index;
+	int nr = sattr->nr;
+
+	return sprintf(buf, "%ld\n",
+		       in_from_reg(data->in[index][nr], data->in_index[index]));
+}
+
+static umode_t nct6683_in_is_visible(struct kobject *kobj,
+				     struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct nct6683_data *data = dev_get_drvdata(dev);
+	int nr = index % 4;	/* attribute */
+
+	/*
+	 * Voltage limits exist for Intel boards,
+	 * but register location and encoding is unknown
+	 */
+	if ((nr == 2 || nr == 3) &&
+	    data->customer_id == NCT6683_CUSTOMER_ID_INTEL)
+		return 0;
+
+	return attr->mode;
+}
+
+SENSOR_TEMPLATE(in_label, "in%d_label", S_IRUGO, show_in_label, NULL, 0);
+SENSOR_TEMPLATE_2(in_input, "in%d_input", S_IRUGO, show_in_reg, NULL, 0, 0);
+SENSOR_TEMPLATE_2(in_min, "in%d_min", S_IRUGO, show_in_reg, NULL, 0, 1);
+SENSOR_TEMPLATE_2(in_max, "in%d_max", S_IRUGO, show_in_reg, NULL, 0, 2);
+
+static struct sensor_device_template *nct6683_attributes_in_template[] = {
+	&sensor_dev_template_in_label,
+	&sensor_dev_template_in_input,
+	&sensor_dev_template_in_min,
+	&sensor_dev_template_in_max,
+	NULL
+};
+
+static struct sensor_template_group nct6683_in_template_group = {
+	.templates = nct6683_attributes_in_template,
+	.is_visible = nct6683_in_is_visible,
+};
+
+static ssize_t
+show_fan(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+	struct nct6683_data *data = nct6683_update_device(dev);
+
+	return sprintf(buf, "%d\n", data->rpm[sattr->index]);
+}
+
+static ssize_t
+show_fan_min(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct nct6683_data *data = nct6683_update_device(dev);
+	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+	int nr = sattr->index;
+
+	return sprintf(buf, "%d\n", data->fan_min[nr]);
+}
+
+static ssize_t
+show_fan_pulses(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+	struct nct6683_data *data = nct6683_update_device(dev);
+
+	return sprintf(buf, "%d\n",
+		       ((data->fanin_cfg[sattr->index] >> 5) & 0x03) + 1);
+}
+
+static umode_t nct6683_fan_is_visible(struct kobject *kobj,
+				      struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct nct6683_data *data = dev_get_drvdata(dev);
+	int fan = index / 3;	/* fan index */
+	int nr = index % 3;	/* attribute index */
+
+	if (!(data->have_fan & (1 << fan)))
+		return 0;
+
+	/*
+	 * Intel may have minimum fan speed limits,
+	 * but register location and encoding are unknown.
+	 */
+	if (nr == 2 && data->customer_id == NCT6683_CUSTOMER_ID_INTEL)
+		return 0;
+
+	return attr->mode;
+}
+
+SENSOR_TEMPLATE(fan_input, "fan%d_input", S_IRUGO, show_fan, NULL, 0);
+SENSOR_TEMPLATE(fan_pulses, "fan%d_pulses", S_IRUGO, show_fan_pulses, NULL, 0);
+SENSOR_TEMPLATE(fan_min, "fan%d_min", S_IRUGO, show_fan_min, NULL, 0);
+
+/*
+ * nct6683_fan_is_visible uses the index into the following array
+ * to determine if attributes should be created or not.
+ * Any change in order or content must be matched.
+ */
+static struct sensor_device_template *nct6683_attributes_fan_template[] = {
+	&sensor_dev_template_fan_input,
+	&sensor_dev_template_fan_pulses,
+	&sensor_dev_template_fan_min,
+	NULL
+};
+
+static struct sensor_template_group nct6683_fan_template_group = {
+	.templates = nct6683_attributes_fan_template,
+	.is_visible = nct6683_fan_is_visible,
+	.base = 1,
+};
+
+static ssize_t
+show_temp_label(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+	struct nct6683_data *data = nct6683_update_device(dev);
+	int nr = sattr->index;
+
+	return sprintf(buf, "%s\n", nct6683_mon_label[data->temp_src[nr]]);
+}
+
+static ssize_t
+show_temp8(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct nct6683_data *data = nct6683_update_device(dev);
+	int index = sattr->index;
+	int nr = sattr->nr;
+
+	return sprintf(buf, "%d\n", data->temp[index][nr] * 1000);
+}
+
+static ssize_t
+show_temp_hyst(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+	struct nct6683_data *data = nct6683_update_device(dev);
+	int nr = sattr->index;
+	int temp = data->temp[1][nr] - data->temp[2][nr];
+
+	return sprintf(buf, "%d\n", temp * 1000);
+}
+
+static ssize_t
+show_temp16(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+	struct nct6683_data *data = nct6683_update_device(dev);
+	int index = sattr->index;
+
+	return sprintf(buf, "%d\n", (data->temp_in[index] / 128) * 500);
+}
+
+/*
+ * Temperature sensor type is determined by temperature source
+ * and can not be modified.
+ * 0x02..0x07: Thermal diode
+ * 0x08..0x18: Thermistor
+ * 0x20..0x2b: Intel PECI
+ * 0x42..0x49: AMD TSI
+ * Others are unspecified (not visible)
+ */
+
+static int get_temp_type(u8 src)
+{
+	if (src >= 0x02 && src <= 0x07)
+		return 3;	/* thermal diode */
+	else if (src >= 0x08 && src <= 0x18)
+		return 4;	/* thermistor */
+	else if (src >= 0x20 && src <= 0x2b)
+		return 6;	/* PECI */
+	else if (src >= 0x42 && src <= 0x49)
+		return 5;
+
+	return 0;
+}
+
+static ssize_t
+show_temp_type(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct nct6683_data *data = nct6683_update_device(dev);
+	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+	int nr = sattr->index;
+	return sprintf(buf, "%d\n", get_temp_type(data->temp_src[nr]));
+}
+
+static umode_t nct6683_temp_is_visible(struct kobject *kobj,
+				       struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct nct6683_data *data = dev_get_drvdata(dev);
+	int temp = index / 7;	/* temp index */
+	int nr = index % 7;	/* attribute index */
+
+	/*
+	 * Intel does not have low temperature limits or temperature hysteresis
+	 * registers, or at least register location and encoding is unknown.
+	 */
+	if ((nr == 2 || nr == 4) &&
+	    data->customer_id == NCT6683_CUSTOMER_ID_INTEL)
+		return 0;
+
+	if (nr == 6 && get_temp_type(data->temp_src[temp]) == 0)
+		return 0;				/* type */
+
+	return attr->mode;
+}
+
+SENSOR_TEMPLATE(temp_input, "temp%d_input", S_IRUGO, show_temp16, NULL, 0);
+SENSOR_TEMPLATE(temp_label, "temp%d_label", S_IRUGO, show_temp_label, NULL, 0);
+SENSOR_TEMPLATE_2(temp_min, "temp%d_min", S_IRUGO, show_temp8, NULL, 0, 0);
+SENSOR_TEMPLATE_2(temp_max, "temp%d_max", S_IRUGO, show_temp8, NULL, 0, 1);
+SENSOR_TEMPLATE(temp_max_hyst, "temp%d_max_hyst", S_IRUGO, show_temp_hyst, NULL,
+		0);
+SENSOR_TEMPLATE_2(temp_crit, "temp%d_crit", S_IRUGO, show_temp8, NULL, 0, 3);
+SENSOR_TEMPLATE(temp_type, "temp%d_type", S_IRUGO, show_temp_type, NULL, 0);
+
+/*
+ * nct6683_temp_is_visible uses the index into the following array
+ * to determine if attributes should be created or not.
+ * Any change in order or content must be matched.
+ */
+static struct sensor_device_template *nct6683_attributes_temp_template[] = {
+	&sensor_dev_template_temp_input,
+	&sensor_dev_template_temp_label,
+	&sensor_dev_template_temp_min,		/* 2 */
+	&sensor_dev_template_temp_max,		/* 3 */
+	&sensor_dev_template_temp_max_hyst,	/* 4 */
+	&sensor_dev_template_temp_crit,		/* 5 */
+	&sensor_dev_template_temp_type,		/* 6 */
+	NULL
+};
+
+static struct sensor_template_group nct6683_temp_template_group = {
+	.templates = nct6683_attributes_temp_template,
+	.is_visible = nct6683_temp_is_visible,
+	.base = 1,
+};
+
+static ssize_t
+show_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct nct6683_data *data = nct6683_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int index = sattr->index;
+
+	return sprintf(buf, "%d\n", data->pwm[index]);
+}
+
+SENSOR_TEMPLATE(pwm, "pwm%d", S_IRUGO, show_pwm, NULL, 0);
+
+static umode_t nct6683_pwm_is_visible(struct kobject *kobj,
+				      struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct nct6683_data *data = dev_get_drvdata(dev);
+	int pwm = index;	/* pwm index */
+
+	if (!(data->have_pwm & (1 << pwm)))
+		return 0;
+
+	return attr->mode;
+}
+
+static struct sensor_device_template *nct6683_attributes_pwm_template[] = {
+	&sensor_dev_template_pwm,
+	NULL
+};
+
+static struct sensor_template_group nct6683_pwm_template_group = {
+	.templates = nct6683_attributes_pwm_template,
+	.is_visible = nct6683_pwm_is_visible,
+	.base = 1,
+};
+
+static ssize_t
+show_global_beep(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct nct6683_data *data = dev_get_drvdata(dev);
+	int ret;
+	u8 reg;
+
+	mutex_lock(&data->update_lock);
+
+	ret = superio_enter(data->sioreg);
+	if (ret)
+		goto error;
+	superio_select(data->sioreg, NCT6683_LD_HWM);
+	reg = superio_inb(data->sioreg, NCT6683_REG_CR_BEEP);
+	superio_exit(data->sioreg);
+
+	mutex_unlock(&data->update_lock);
+
+	return sprintf(buf, "%u\n", !!(reg & NCT6683_CR_BEEP_MASK));
+
+error:
+	mutex_unlock(&data->update_lock);
+	return ret;
+}
+
+static ssize_t
+store_global_beep(struct device *dev, struct device_attribute *attr,
+		  const char *buf, size_t count)
+{
+	struct nct6683_data *data = dev_get_drvdata(dev);
+	unsigned long val;
+	u8 reg;
+	int ret;
+
+	if (kstrtoul(buf, 10, &val) || (val != 0 && val != 1))
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+
+	ret = superio_enter(data->sioreg);
+	if (ret) {
+		count = ret;
+		goto error;
+	}
+
+	superio_select(data->sioreg, NCT6683_LD_HWM);
+	reg = superio_inb(data->sioreg, NCT6683_REG_CR_BEEP);
+	if (val)
+		reg |= NCT6683_CR_BEEP_MASK;
+	else
+		reg &= ~NCT6683_CR_BEEP_MASK;
+	superio_outb(data->sioreg, NCT6683_REG_CR_BEEP, reg);
+	superio_exit(data->sioreg);
+error:
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+/* Case open detection */
+
+static ssize_t
+show_caseopen(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct nct6683_data *data = dev_get_drvdata(dev);
+	int ret;
+	u8 reg;
+
+	mutex_lock(&data->update_lock);
+
+	ret = superio_enter(data->sioreg);
+	if (ret)
+		goto error;
+	superio_select(data->sioreg, NCT6683_LD_ACPI);
+	reg = superio_inb(data->sioreg, NCT6683_REG_CR_CASEOPEN);
+	superio_exit(data->sioreg);
+
+	mutex_unlock(&data->update_lock);
+
+	return sprintf(buf, "%u\n", !(reg & NCT6683_CR_CASEOPEN_MASK));
+
+error:
+	mutex_unlock(&data->update_lock);
+	return ret;
+}
+
+static ssize_t
+clear_caseopen(struct device *dev, str