Merge tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here's the big tty/serial driver update for 4.1-rc1.

  It was delayed for a bit due to some questions surrounding some of the
  console command line parsing changes that are in here.  There's still
  one tiny regression for people who were previously putting multiple
  console command lines and expecting them all to be ignored for some
  odd reason, but Peter is working on fixing that.  If not, I'll send a
  revert for the offending patch, but I have faith that Peter can
  address it.

  Other than the console work here, there's the usual serial driver
  updates and changes, and a buch of 8250 reworks to try to make that
  driver easier to maintain over time, and have it support more devices
  in the future.

  All of these have been in linux-next for a while"

* tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
  n_gsm: Drop unneeded cast on netdev_priv
  sc16is7xx: expose RTS inversion in RS-485 mode
  serial: 8250_pci: port failed after wakeup from S3
  earlycon: 8250: Document kernel command line options
  earlycon: 8250: Fix command line regression
  earlycon: Fix __earlycon_table stride
  tty: clean up the tty time logic a bit
  serial: 8250_dw: only get the clock rate in one place
  serial: 8250_dw: remove useless ACPI ID check
  dmaengine: hsu: move memory allocation to GFP_NOWAIT
  dmaengine: hsu: remove redundant pieces of code
  serial: 8250_pci: add Intel Tangier support
  dmaengine: hsu: add Intel Tangier PCI ID
  serial: 8250_pci: replace switch-case by formula for Intel MID
  serial: 8250_pci: replace switch-case by formula
  tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1
  serial: jsm: some off by one bugs
  serial: xuartps: Fix check in console_setup().
  serial: xuartps: Get rid of register access macros.
  serial: xuartps: Fix iobase use.
  ...

79 files changed, 2357 insertions, 4743 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 274252f205b7..84960c66c77b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -713,10 +713,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]
+		uart[8250],mmio32,<addr>[,options]
+		uart[8250],0x<addr>[,options]
 			Start an early, polled-mode console on the 8250/16550
 			UART at the specified I/O port or MMIO address,
-			switching to the matching ttyS device later.  The
-			options are the same as for ttyS, above.
+			switching to the matching ttyS device later.
+			MMIO inter-register address stride is either 8-bit
+			(mmio) or 32-bit (mmio32).
+			If none of [io|mmio|mmio32], <addr> is assumed to be
+			equivalent to 'mmio'. 'options' are specified in the
+			same format described for ttyS above; if unspecified,
+			the h/w is not re-initialized.
+
 		hvc<n>	Use the hypervisor console device <n>. This is for
 			both Xen and PowerPC hypervisors.
 
@@ -950,11 +958,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]
 		uart[8250],mmio32,<addr>[,options]
+		uart[8250],0x<addr>[,options]
 			Start an early, polled-mode console on the 8250/16550
 			UART at the specified I/O port or MMIO address.
 			MMIO inter-register address stride is either 8-bit
 			(mmio) or 32-bit (mmio32).
-			The options are the same as for ttyS, above.
+			If none of [io|mmio|mmio32], <addr> is assumed to be
+			equivalent to 'mmio'. 'options' are specified in the
+			same format described for "console=ttyS<n>"; if
+			unspecified, the h/w is not initialized.
 
 		pl011,<addr>
 			Start an early, polled-mode console on a pl011 serial
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 6849f533154f..cec3e187c48f 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
-#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
 
 #include <asm/cacheflush.h>
 #include <asm/smp-ops.h>
@@ -75,7 +75,7 @@ static void __init console_config(void)
 	if ((strstr(fw_getcmdline(), "earlycon=")) == NULL) {
 		sprintf(console_string, "uart8250,io,0x3f8,%d%c%c", baud,
 			parity, bits);
-		setup_early_serial8250_console(console_string);
+		setup_earlycon(console_string);
 	}
 
 	if ((strstr(fw_getcmdline(), "console=")) == NULL) {
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 20028da8ae18..72484a645f05 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -43,10 +43,6 @@ config EARLY_PRINTK
 	  with klogd/syslogd or the X server. You should normally N here,
 	  unless you want to debug such a crash.
 
-config EARLY_PRINTK_INTEL_MID
-	bool "Early printk for Intel MID platform support"
-	depends on EARLY_PRINTK && X86_INTEL_MID
-
 config EARLY_PRINTK_DBGP
 	bool "Early printk via EHCI debug port"
 	depends on EARLY_PRINTK && PCI
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index 705d35708a50..7c5af123bdbd 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -136,9 +136,6 @@ extern enum intel_mid_timer_options intel_mid_timer_options;
 #define SFI_MTMR_MAX_NUM 8
 #define SFI_MRTC_MAX	8
 
-extern struct console early_hsu_console;
-extern void hsu_early_console_init(const char *);
-
 extern void intel_scu_devices_create(void);
 extern void intel_scu_devices_destroy(void);
 
diff --git a/arch/x86/include/asm/serial.h b/arch/x86/include/asm/serial.h
index 460b84f64556..8378b8c9109c 100644
--- a/arch/x86/include/asm/serial.h
+++ b/arch/x86/include/asm/serial.h
@@ -12,11 +12,11 @@
 
 /* Standard COM flags (except for COM4, because of the 8514 problem) */
 #ifdef CONFIG_SERIAL_DETECT_IRQ
-# define STD_COMX_FLAGS	(ASYNC_BOOT_AUTOCONF |	ASYNC_SKIP_TEST	| ASYNC_AUTO_IRQ)
-# define STD_COM4_FLAGS	(ASYNC_BOOT_AUTOCONF |	0		| ASYNC_AUTO_IRQ)
+# define STD_COMX_FLAGS	(UPF_BOOT_AUTOCONF |	UPF_SKIP_TEST	| UPF_AUTO_IRQ)
+# define STD_COM4_FLAGS	(UPF_BOOT_AUTOCONF |	0		| UPF_AUTO_IRQ)
 #else
-# define STD_COMX_FLAGS	(ASYNC_BOOT_AUTOCONF |	ASYNC_SKIP_TEST	| 0		)
-# define STD_COM4_FLAGS	(ASYNC_BOOT_AUTOCONF |	0		| 0		)
+# define STD_COMX_FLAGS	(UPF_BOOT_AUTOCONF |	UPF_SKIP_TEST	| 0		)
+# define STD_COM4_FLAGS	(UPF_BOOT_AUTOCONF |	0		| 0		)
 #endif
 
 #define SERIAL_PORT_DFNS								\
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 49ff55ef9b26..89427d8d4fc5 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -375,12 +375,6 @@ static int __init setup_early_printk(char *buf)
 		if (!strncmp(buf, "xen", 3))
 			early_console_register(&xenboot_console, keep);
 #endif
-#ifdef CONFIG_EARLY_PRINTK_INTEL_MID
-		if (!strncmp(buf, "hsu", 3)) {
-			hsu_early_console_init(buf + 3);
-			early_console_register(&early_hsu_console, keep);
-		}
-#endif
 #ifdef CONFIG_EARLY_PRINTK_EFI
 		if (!strncmp(buf, "efi", 3))
 			early_console_register(&early_efi_console, keep);
diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile
index 0a8ee703b9fa..0ce1b1913673 100644
--- a/arch/x86/platform/intel-mid/Makefile
+++ b/arch/x86/platform/intel-mid/Makefile
@@ -1,5 +1,4 @@
 obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfl.o
-obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_intel_mid.o
 
 # SFI specific code
 ifdef CONFIG_X86_INTEL_MID
diff --git a/arch/x86/platform/intel-mid/early_printk_intel_mid.c b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
deleted file mode 100644
index 4e720829ab90..000000000000
--- a/arch/x86/platform/intel-mid/early_printk_intel_mid.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * early_printk_intel_mid.c - early consoles for Intel MID platforms
- *
- * Copyright (c) 2008-2010, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-/*
- * This file implements early console named hsu.
- * hsu is based on a High Speed UART device which only exists in the Medfield
- * platform
- */
-
-#include <linux/serial_reg.h>
-#include <linux/serial_mfd.h>
-#include <linux/console.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/fixmap.h>
-#include <asm/pgtable.h>
-#include <asm/intel-mid.h>
-
-/*
- * Following is the early console based on Medfield HSU (High
- * Speed UART) device.
- */
-#define HSU_PORT_BASE		0xffa28080
-
-static void __iomem *phsu;
-
-void hsu_early_console_init(const char *s)
-{
-	unsigned long paddr, port = 0;
-	u8 lcr;
-
-	/*
-	 * Select the early HSU console port if specified by user in the
-	 * kernel command line.
-	 */
-	if (*s && !kstrtoul(s, 10, &port))
-		port = clamp_val(port, 0, 2);
-
-	paddr = HSU_PORT_BASE + port * 0x80;
-	phsu = (void __iomem *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr);
-
-	/* Disable FIFO */
-	writeb(0x0, phsu + UART_FCR);
-
-	/* Set to default 115200 bps, 8n1 */
-	lcr = readb(phsu + UART_LCR);
-	writeb((0x80 | lcr), phsu + UART_LCR);
-	writeb(0x18, phsu + UART_DLL);
-	writeb(lcr,  phsu + UART_LCR);
-	writel(0x3600, phsu + UART_MUL*4);
-
-	writeb(0x8, phsu + UART_MCR);
-	writeb(0x7, phsu + UART_FCR);
-	writeb(0x3, phsu + UART_LCR);
-
-	/* Clear IRQ status */
-	readb(phsu + UART_LSR);
-	readb(phsu + UART_RX);
-	readb(phsu + UART_IIR);
-	readb(phsu + UART_MSR);
-
-	/* Enable FIFO */
-	writeb(0x7, phsu + UART_FCR);
-}
-
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
-static void early_hsu_putc(char ch)
-{
-	unsigned int timeout = 10000; /* 10ms */
-	u8 status;
-
-	while (--timeout) {
-		status = readb(phsu + UART_LSR);
-		if (status & BOTH_EMPTY)
-			break;
-		udelay(1);
-	}
-
-	/* Only write the char when there was no timeout */
-	if (timeout)
-		writeb(ch, phsu + UART_TX);
-}
-
-static void early_hsu_write(struct console *con, const char *str, unsigned n)
-{
-	int i;
-
-	for (i = 0; i < n && *str; i++) {
-		if (*str == '\n')
-			early_hsu_putc('\r');
-		early_hsu_putc(*str);
-		str++;
-	}
-}
-
-struct console early_hsu_console = {
-	.name =		"earlyhsu",
-	.write =	early_hsu_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 942ca541dcbd..91eced044321 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -112,6 +112,8 @@ config FSL_DMA
 	  EloPlus is on mpc85xx and mpc86xx and Pxxx parts, and the Elo3 is on
 	  some Txxx and Bxxx parts.
 
+source "drivers/dma/hsu/Kconfig"
+
 config MPC512X_DMA
 	tristate "Freescale MPC512x built-in DMA engine support"
 	depends on PPC_MPC512x || PPC_MPC831x
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 539d4825bd76..7e8301cb489d 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_DMATEST) += dmatest.o
 obj-$(CONFIG_INTEL_IOATDMA) += ioat/
 obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
+obj-$(CONFIG_HSU_DMA) += hsu/
 obj-$(CONFIG_MPC512X_DMA) += mpc512x_dma.o
 obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
 obj-$(CONFIG_MV_XOR) += mv_xor.o
diff --git a/drivers/dma/hsu/Kconfig b/drivers/dma/hsu/Kconfig
new file mode 100644
index 000000000000..7e98eff7440e
--- /dev/null
+++ b/drivers/dma/hsu/Kconfig
@@ -0,0 +1,14 @@
+# DMA engine configuration for hsu
+config HSU_DMA
+	tristate "High Speed UART DMA support"
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+
+config HSU_DMA_PCI
+	tristate "High Speed UART DMA PCI driver"
+	depends on PCI
+	select HSU_DMA
+	help
+	  Support the High Speed UART DMA on the platfroms that
+	  enumerate it as a PCI device. For example, Intel Medfield
+	  has integrated this HSU DMA controller.
diff --git a/drivers/dma/hsu/Makefile b/drivers/dma/hsu/Makefile
new file mode 100644
index 000000000000..b8f9af032ef1
--- /dev/null
+++ b/drivers/dma/hsu/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_HSU_DMA)		+= hsu_dma.o
+hsu_dma-objs		:= hsu.o
+
+obj-$(CONFIG_HSU_DMA_PCI)	+= hsu_dma_pci.o
+hsu_dma_pci-objs	:= pci.o
diff --git a/drivers/dma/hsu/hsu.c b/drivers/dma/hsu/hsu.c
new file mode 100644
index 000000000000..9b84def7a353
--- /dev/null
+++ b/drivers/dma/hsu/hsu.c
@@ -0,0 +1,495 @@
+/*
+ * Core driver for the High Speed UART DMA
+ *
+ * Copyright (C) 2015 Intel Corporation
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * Partially based on the bits found in drivers/tty/serial/mfd.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * DMA channel allocation:
+ * 1. Even number chans are used for DMA Read (UART TX), odd chans for DMA
+ *    Write (UART RX).
+ * 2. 0/1 channel are assigned to port 0, 2/3 chan to port 1, 4/5 chan to
+ *    port 3, and so on.
+ */
+
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "hsu.h"
+
+#define HSU_DMA_BUSWIDTHS				\
+	BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED)	|	\
+	BIT(DMA_SLAVE_BUSWIDTH_1_BYTE)		|	\
+	BIT(DMA_SLAVE_BUSWIDTH_2_BYTES)		|	\
+	BIT(DMA_SLAVE_BUSWIDTH_3_BYTES)		|	\
+	BIT(DMA_SLAVE_BUSWIDTH_4_BYTES)		|	\
+	BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)		|	\
+	BIT(DMA_SLAVE_BUSWIDTH_16_BYTES)
+
+static inline void hsu_chan_disable(struct hsu_dma_chan *hsuc)
+{
+	hsu_chan_writel(hsuc, HSU_CH_CR, 0);
+}
+
+static inline void hsu_chan_enable(struct hsu_dma_chan *hsuc)
+{
+	u32 cr = HSU_CH_CR_CHA;
+
+	if (hsuc->direction == DMA_MEM_TO_DEV)
+		cr &= ~HSU_CH_CR_CHD;
+	else if (hsuc->direction == DMA_DEV_TO_MEM)
+		cr |= HSU_CH_CR_CHD;
+
+	hsu_chan_writel(hsuc, HSU_CH_CR, cr);
+}
+
+static void hsu_dma_chan_start(struct hsu_dma_chan *hsuc)
+{
+	struct dma_slave_config *config = &hsuc->config;
+	struct hsu_dma_desc *desc = hsuc->desc;
+	u32 bsr = 0, mtsr = 0;	/* to shut the compiler up */
+	u32 dcr = HSU_CH_DCR_CHSOE | HSU_CH_DCR_CHEI;
+	unsigned int i, count;
+
+	if (hsuc->direction == DMA_MEM_TO_DEV) {
+		bsr = config->dst_maxburst;
+		mtsr = config->dst_addr_width;
+	} else if (hsuc->direction == D