Merge tag 'hwmon-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - PMBus driver for MPS Multi-phase mp5023

   - PMBus driver for Delta AHE-50DC fan control module

   - Driver for NZXT RGB&Fan Controller/Smart Device v2

   - Driver for Texas Instruments INA238

   - Driver to support X370 Asus WMI

   - Driver to support B550 Asus WMI

  Other notable changes:

   - Cleanup of ntc_thermistor driver, and added support for Samsung
     1404-001221 NTC

   - Improve detection of LM84, MAX1617, and MAX1617A in adm1021 driver

   - Clean up tmp401 driver, and convert to with_info API

   - Add support for regulators and IR38060, IR38164 IR38263 to ir38064
     PMBus driver

   - Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh to
     k10temp driver

   - Add support for F81966 to f71882fg driver

   - Add support for ONSEMI N34TS04 to jc42 driver

   - Clean up and simplify dell-smm driver

   - Add support for ROG STRIX B550-A/X570-I GAMING to nct6775 driver

  And various other minor improvements and fixes"

* tag 'hwmon-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
  hwmon: (nzxt-smart2) make array detect_fans_report static const
  hwmon: (xgene-hwmon) Add free before exiting xgene_hwmon_probe
  hwmon: (nzxt-smart2) Fix "unused function" warning
  hwmon: (dell-smm) Pack the whole smm_regs struct
  hwmon: (nct6775) Additional check for ChipID before ASUS WMI usage
  hwmon: (mr75203) fix wrong power-up delay value
  hwmon/pmbus: (ir38064) Fix spelling mistake "comaptible" -> "compatible"
  hwmon/pmbus: (ir38064) Expose a regulator
  hwmon/pmbus: (ir38064) Add of_match_table
  hwmon/pmbus: (ir38064) Add support for IR38060, IR38164 IR38263
  hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.
  hwmon: (nct6775) add ROG STRIX B550-A/X570-I GAMING
  hwmon: (pmbus) Add support for MPS Multi-phase mp5023
  dt-bindings: add Delta AHE-50DC fan control module
  hwmon: (pmbus) Add Delta AHE-50DC fan control module driver
  hwmon: prefix kernel-doc comments for structs with struct
  hwmon: (ntc_thermistor) Add Samsung 1404-001221 NTC
  hwmon: (ntc_thermistor) Drop OF dependency
  hwmon: (dell-smm) Unify i8k_ioctl() and i8k_ioctl_unlocked()
  hwmon: (dell-smm) Simplify ioctl handler
  ...

39 files changed, 4118 insertions, 736 deletions

diff --git a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
index 9e77cee07dbc..3d3b139a91a2 100644
--- a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
@@ -76,6 +76,7 @@ properties:
       - const: murata,ncp15wl333
       - const: murata,ncp03wf104
       - const: murata,ncp15xh103
+      - const: samsung,1404-001221
       # Deprecated "ntp," compatible strings
       - const: ntc,ncp15wb473
         deprecated: true
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
index 6f0443322a36..47af97bb4ced 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
@@ -26,6 +26,7 @@ properties:
       - ti,ina226
       - ti,ina230
       - ti,ina231
+      - ti,ina238
 
   reg:
     maxItems: 1
@@ -35,6 +36,27 @@ properties:
       Shunt resistor value in micro-Ohm.
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  ti,shunt-gain:
+    description: |
+      Programmable gain divisor for the shunt voltage accuracy and range. This
+      property only applies to devices that have configurable PGA/ADCRANGE. The
+      gain value is used configure the gain and to convert the shunt voltage,
+      current and power register values when reading measurements from the
+      device.
+
+      For devices that have a configurable PGA (e.g. INA209, INA219, INA220),
+      the gain value maps directly with the PG bits of the config register.
+
+      For devices that have ADCRANGE configuration (e.g. INA238) a shunt-gain
+      value of 1 maps to ADCRANGE=1 where no gain divisor is applied to the
+      shunt voltage, and a value of 4 maps to ADCRANGE=0 such that a wider
+      voltage range is used.
+
+      The default value is device dependent, and is defined by the reset value
+      of PGA/ADCRANGE in the respective configuration registers.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 791079021f1b..c451ae82d8d7 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -73,6 +73,8 @@ properties:
           - dallas,ds4510
             # Digital Thermometer and Thermostat
           - dallas,ds75
+            # Delta AHE-50DC Open19 power shelf fan control module
+          - delta,ahe50dc-fan
             # Delta Electronics DPS-650-AB power supply
           - delta,dps650ab
           # Delta Electronics DPS920AB 920W 54V Power Supply
@@ -121,8 +123,14 @@ properties:
           - ibm,cffps2
             # Infineon IR36021 digital POL buck controller
           - infineon,ir36021
+          # Infineon IR38060 Voltage Regulator
+          - infineon,ir38060
             # Infineon IR38064 Voltage Regulator
           - infineon,ir38064
+          # Infineon IR38164 Voltage Regulator
+          - infineon,ir38164
+          # Infineon IR38263 Voltage Regulator
+          - infineon,ir38263
             # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
           - infineon,slb9635tt
             # Infineon SLB9645 I2C TPM (new protocol, max 400khz)
diff --git a/Documentation/hwmon/asus_wmi_ec_sensors.rst b/Documentation/hwmon/asus_wmi_ec_sensors.rst
new file mode 100644
index 000000000000..1b287f229e86
--- /dev/null
+++ b/Documentation/hwmon/asus_wmi_ec_sensors.rst
@@ -0,0 +1,38 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver asus_wmi_ec_sensors
+=================================
+
+Supported boards:
+ * PRIME X570-PRO,
+ * Pro WS X570-ACE,
+ * ROG CROSSHAIR VIII DARK HERO,
+ * ROG CROSSHAIR VIII FORMULA,
+ * ROG CROSSHAIR VIII HERO,
+ * ROG STRIX B550-E GAMING,
+ * ROG STRIX B550-I GAMING,
+ * ROG STRIX X570-E GAMING.
+
+Authors:
+    - Eugene Shalygin <eugene.shalygin@gmail.com>
+
+Description:
+------------
+ASUS mainboards publish hardware monitoring information via Super I/O
+chip and the ACPI embedded controller (EC) registers. Some of the sensors
+are only available via the EC.
+
+ASUS WMI interface provides a method (BREC) to read data from EC registers,
+which is utilized by this driver to publish those sensor readings to the
+HWMON system. The driver is aware of and reads the following sensors:
+
+1. Chipset (PCH) temperature
+2. CPU package temperature
+3. Motherboard temperature
+4. Readings from the T_Sensor header
+5. VRM temperature
+6. CPU_Opt fan RPM
+7. Chipset fan RPM
+8. Readings from the "Water flow meter" header (RPM)
+9. Readings from the "Water In" and "Water Out" temperature headers
+10. CPU current
diff --git a/Documentation/hwmon/asus_wmi_sensors.rst b/Documentation/hwmon/asus_wmi_sensors.rst
new file mode 100644
index 000000000000..8f2096cf5183
--- /dev/null
+++ b/Documentation/hwmon/asus_wmi_sensors.rst
@@ -0,0 +1,78 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver asus_wmi_sensors
+=================================
+
+Supported boards:
+ * PRIME X399-A,
+ * PRIME X470-PRO,
+ * ROG CROSSHAIR VI EXTREME,
+ * ROG CROSSHAIR VI HERO,
+ * ROG CROSSHAIR VI HERO (WI-FI AC),
+ * ROG CROSSHAIR VII HERO,
+ * ROG CROSSHAIR VII HERO (WI-FI),
+ * ROG STRIX B450-E GAMING,
+ * ROG STRIX B450-F GAMING,
+ * ROG STRIX B450-I GAMING,
+ * ROG STRIX X399-E GAMING,
+ * ROG STRIX X470-F GAMING,
+ * ROG STRIX X470-I GAMING,
+ * ROG ZENITH EXTREME,
+ * ROG ZENITH EXTREME ALPHA.
+
+Authors:
+    - Ed Brindley <kernel@maidavale.org>
+
+Description:
+------------
+ASUS mainboards publish hardware monitoring information via WMI interface.
+
+ASUS WMI interface provides a methods to get list of sensors and values of
+such, which is utilized by this driver to publish those sensor readings to the
+HWMON system.
+
+The driver is aware of and reads the following sensors:
+ * CPU Core Voltage,
+ * CPU SOC Voltage,
+ * DRAM Voltage,
+ * VDDP Voltage,
+ * 1.8V PLL Voltage,
+ * +12V Voltage,
+ * +5V Voltage,
+ * 3VSB Voltage,
+ * VBAT Voltage,
+ * AVCC3 Voltage,
+ * SB 1.05V Voltage,
+ * CPU Core Voltage,
+ * CPU SOC Voltage,
+ * DRAM Voltage,
+ * CPU Fan RPM,
+ * Chassis Fan 1 RPM,
+ * Chassis Fan 2 RPM,
+ * Chassis Fan 3 RPM,
+ * HAMP Fan RPM,
+ * Water Pump RPM,
+ * CPU OPT RPM,
+ * Water Flow RPM,
+ * AIO Pump RPM,
+ * CPU Temperature,
+ * CPU Socket Temperature,
+ * Motherboard Temperature,
+ * Chipset Temperature,
+ * Tsensor 1 Temperature,
+ * CPU VRM Temperature,
+ * Water In,
+ * Water Out,
+ * CPU VRM Output Current.
+
+Known Issues:
+ * The WMI implementation in some of Asus' BIOSes is buggy. This can result in
+   fans stopping, fans getting stuck at max speed, or temperature readouts
+   getting stuck. This is not an issue with the driver, but the BIOS. The Prime
+   X470 Pro seems particularly bad for this. The more frequently the WMI
+   interface is polled the greater the potential for this to happen. Until you
+   have subjected your computer to an extended soak test while polling the
+   sensors frequently, don't leave you computer unattended. Upgrading to new
+   BIOS version with method version greater than or equal to two should
+   rectify the issue.
+ * A few boards report 12v voltages to be ~10v.
diff --git a/Documentation/hwmon/ina238.rst b/Documentation/hwmon/ina238.rst
new file mode 100644
index 000000000000..d9f479984420
--- /dev/null
+++ b/Documentation/hwmon/ina238.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver ina238
+====================
+
+Supported chips:
+
+  * Texas Instruments INA238
+
+    Prefix: 'ina238'
+
+    Addresses: I2C 0x40 - 0x4f
+
+    Datasheet:
+	https://www.ti.com/lit/gpn/ina238
+
+Author: Nathan Rossi <nathan.rossi@digi.com>
+
+Description
+-----------
+
+The INA238 is a current shunt, power and temperature monitor with an I2C
+interface. It includes a number of programmable functions including alerts,
+conversion rate, sample averaging and selectable shunt voltage accuracy.
+
+The shunt value in micro-ohms can be set via platform data or device tree at
+compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
+refer to the Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml for bindings
+if the device tree is used.
+
+Sysfs entries
+-------------
+
+======================= =======================================================
+in0_input		Shunt voltage (mV)
+in0_min			Minimum shunt voltage threshold (mV)
+in0_min_alarm		Minimum shunt voltage alarm
+in0_max			Maximum shunt voltage threshold (mV)
+in0_max_alarm		Maximum shunt voltage alarm
+
+in1_input		Bus voltage (mV)
+in1_min			Minimum bus voltage threshold (mV)
+in1_min_alarm		Minimum shunt voltage alarm
+in1_max			Maximum bus voltage threshold (mV)
+in1_max_alarm		Maximum shunt voltage alarm
+
+power1_input		Power measurement (uW)
+power1_max		Maximum power threshold (uW)
+power1_max_alarm	Maximum power alarm
+
+curr1_input		Current measurement (mA)
+
+temp1_input		Die temperature measurement (mC)
+temp1_max		Maximum die temperature threshold (mC)
+temp1_max_alarm		Maximum die temperature alarm
+======================= =======================================================
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 7046bf1870d9..df20022c741f 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -43,6 +43,8 @@ Hardware Monitoring Kernel Drivers
    asb100
    asc7621
    aspeed-pwm-tacho
+   asus_wmi_ec_sensors
+   asus_wmi_sensors
    bcm54140
    bel-pfe
    bpa-rs600
@@ -76,6 +78,7 @@ Hardware Monitoring Kernel Drivers
    ibmpowernv
    ina209
    ina2xx
+   ina238
    ina3221
    intel-m10-bmc-hwmon
    ir35221
@@ -142,6 +145,7 @@ Hardware Monitoring Kernel Drivers
    mlxreg-fan
    mp2888
    mp2975
+   mp5023
    nct6683
    nct6775
    nct7802
@@ -150,6 +154,7 @@ Hardware Monitoring Kernel Drivers
    nsa320
    ntc_thermistor
    nzxt-kraken2
+   nzxt-smart2
    occ
    pc87360
    pc87427
diff --git a/Documentation/hwmon/ir38064.rst b/Documentation/hwmon/ir38064.rst
index c455d755a267..e1148f21ea2a 100644
--- a/Documentation/hwmon/ir38064.rst
+++ b/Documentation/hwmon/ir38064.rst
@@ -3,14 +3,38 @@ Kernel driver ir38064
 
 Supported chips:
 
+  * Infineon IR38060
+
+    Prefix: 'IR38060'
+    Addresses scanned: -
+
+    Datasheet: Publicly available at the Infineon website
+      https://www.infineon.com/dgdl/Infineon-IR38060M-DS-v03_16-EN.pdf?fileId=5546d4625c167129015c3291ea9a4cee
+
   * Infineon IR38064
 
     Prefix: 'ir38064'
     Addresses scanned: -
 
-    Datasheet: Publicly available at the Infineon webiste
+    Datasheet: Publicly available at the Infineon website
       https://www.infineon.com/dgdl/Infineon-IR38064MTRPBF-DS-v03_07-EN.pdf?fileId=5546d462584d1d4a0158db0d9efb67ca
 
+  * Infineon IR38164
+
+    Prefix: 'ir38164'
+    Addresses scanned: -
+
+    Datasheet: Publicly available at the Infineon website
+      https://www.infineon.com/dgdl/Infineon-IR38164M-DS-v02_02-EN.pdf?fileId=5546d462636cc8fb01640046efea1248
+
+  * Infineon ir38263
+
+    Prefix: 'ir38263'
+    Addresses scanned: -
+
+    Datasheet:  Publicly available at the Infineon website
+      https://www.infineon.com/dgdl/Infineon-IR38263M-DataSheet-v03_05-EN.pdf?fileId=5546d4625b62cd8a015bcf81f90a6e52
+
 Authors:
       - Maxim Sloyko <maxims@google.com>
       - Patrick Venture <venture@google.com>
@@ -18,7 +42,7 @@ Authors:
 Description
 -----------
 
-IR38064 is a Single-input Voltage, Synchronous Buck Regulator, DC-DC Converter.
+IR38x6x are a Single-input Voltage, Synchronous Buck Regulator, DC-DC Converter.
 
 Usage Notes
 -----------
diff --git a/Documentation/hwmon/mp5023.rst b/Documentation/hwmon/mp5023.rst
new file mode 100644
index 000000000000..af5ab1345a91
--- /dev/null
+++ b/Documentation/hwmon/mp5023.rst
@@ -0,0 +1,84 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver mp5023
+====================
+
+Supported chips:
+
+  * MPS MP5023
+
+    Prefix: 'mp5023'
+
+  * Datasheet
+
+    Publicly available at the MPS website : https://www.monolithicpower.com/en/mp5023.html
+
+Author:
+
+	Howard Chiu <howard.chiu@quantatw.com>
+
+Description
+-----------
+
+This driver implements support for Monolithic Power Systems, Inc. (MPS)
+MP5023 Hot-Swap Controller.
+
+Device complaint with:
+
+- PMBus rev 1.3 interface.
+
+Device supports direct format for reading input voltage, output voltage,
+output current, input power and temperature.
+
+The driver exports the following attributes via the 'sysfs' files
+for input voltage:
+
+**in1_input**
+
+**in1_label**
+
+**in1_max**
+
+**in1_max_alarm**
+
+**in1_min**
+
+**in1_min_alarm**
+
+The driver provides the following attributes for output voltage:
+
+**in2_input**
+
+**in2_label**
+
+**in2_alarm**
+
+The driver provides the following attributes for output current:
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_alarm**
+
+**curr1_max**
+
+The driver provides the following attributes for input power:
+
+**power1_input**
+
+**power1_label**
+
+**power1_alarm**
+
+The driver provides the following attributes for temperature:
+
+**temp1_input**
+
+**temp1_max**
+
+**temp1_max_alarm**
+
+**temp1_crit**
+
+**temp1_crit_alarm**
diff --git a/Documentation/hwmon/nzxt-smart2.rst b/Documentation/hwmon/nzxt-smart2.rst
new file mode 100644
index 000000000000..d9d1b2742665
--- /dev/null
+++ b/Documentation/hwmon/nzxt-smart2.rst
@@ -0,0 +1,62 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver nzxt-smart2
+=========================
+
+Supported devices:
+
+- NZXT RGB & Fan controller
+- NZXT Smart Device v2
+
+Description
+-----------
+
+This driver implements monitoring and control of fans plugged into the device.
+Besides typical speed monitoring and PWM duty cycle control, voltage and current
+is reported for every fan.
+
+The device also has two connectors for RGB LEDs; support for them isn't
+implemented (mainly because there is no standardized sysfs interface).
+
+Also, the device has a noise sensor, but the sensor seems to be completely
+useless (and very imprecise), so support for it isn't implemented too.
+
+Usage Notes
+-----------
+
+The device should be autodetected, and the driver should load automatically.
+
+If fans are plugged in/unplugged while the system is powered on, the driver
+must be reloaded to detect configuration changes; otherwise, new fans can't
+be controlled (`pwm*` changes will be ignored). It is necessary because the
+device has a dedicated "detect fans" command, and currently, it is executed only
+during initialization. Speed, voltage, current monitoring will work even without
+reload. As an alternative to reloading the module, a userspace tool (like
+`liquidctl`_) can be used to run "detect fans" command through hidraw interface.
+
+The driver coexists with userspace tools that access the device through hidraw
+interface with no known issues.
+
+.. _liquidctl: https://github.com/liquidctl/liquidctl
+
+Sysfs entries
+-------------
+
+=======================	========================================================
+fan[1-3]_input		Fan speed monitoring (in rpm).
+curr[1-3]_input		Current supplied to the fan (in milliamperes).
+in[0-2]_input		Voltage supplied to the fan (in millivolts).
+pwm[1-3]		Controls fan speed: PWM duty cycle for PWM-controlled
+			fans, voltage for other fans. Voltage can be changed in
+			9-12 V range, but the value of the sysfs attribute is
+			always in 0-255 range (1 = 9V, 255 = 12V). Setting the
+			attribute to 0 turns off the fan completely.
+pwm[1-3]_enable		1 if the fan can be controlled by writing to the
+			corresponding pwm* attribute, 0 otherwise. The device
+			can control only the fans it detected itself, so the
+			attribute is read-only.
+pwm[1-3]_mode		Read-only, 1 for PWM-controlled fans, 0 for other fans
+			(or if no fan connected).
+update_interval		The interval at which all inputs are updated (in
+			milliseconds). The default is 1000ms. Minimum is 250ms.
+=======================	========================================================
diff --git a/MAINTAINERS b/MAINTAINERS
index 38a0a612ccda..36f192a9f204 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3013,6 +3013,20 @@ W:	http://acpi4asus.sf.net
 F:	drivers/platform/x86/asus*.c
 F:	drivers/platform/x86/eeepc*.c
 
+ASUS WMI HARDWARE MONITOR DRIVER
+M:	Ed Brindley <kernel@maidavale.org>
+M:	Denis Pauk <pauk.denis@gmail.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	drivers/hwmon/asus_wmi_sensors.c
+
+ASUS WMI EC HARDWARE MONITOR DRIVER
+M:	Eugene Shalygin <eugene.shalygin@gmail.com>
+M:	Denis Pauk <pauk.denis@gmail.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	drivers/hwmon/asus_wmi_ec_sensors.c
+
 ASUS WIRELESS RADIO CONTROL DRIVER
 M:	João Paulo Rechi Vita <jprvita@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -5440,6 +5454,12 @@ W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/platform/sti/delta
 
+DELTA AHE-50DC FAN CONTROL MODULE DRIVER
+M:	Zev Weiss <zev@bewilderbeest.net>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	drivers/hwmon/pmbus/delta-ahe50dc-fan.c
+
 DELTA DPS920AB PSU DRIVER
 M:	Robert Marko <robert.marko@sartura.hr>
 L:	linux-hwmon@vger.kernel.org
@@ -13837,6 +13857,13 @@ S:	Maintained
 F:	Documentation/hwmon/nzxt-kraken2.rst
 F:	drivers/hwmon/nzxt-kraken2.c
 
+NZXT-SMART2 HARDWARE MONITORING DRIVER
+M:	Aleksandr Mezin <mezin.alexander@gmail.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/hwmon/nzxt-smart2.rst
+F:	drivers/hwmon/nzxt-smart2.c
+
 OBJAGG
 M:	Jiri Pirko <jiri@nvidia.com>
 L:	netdev@vger.kernel.org
diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index f814d5fc333e..020c906f7934 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -19,12 +19,14 @@
 #define PCI_DEVICE_ID_AMD_17H_M10H_ROOT	0x15d0
 #define PCI_DEVICE_ID_AMD_17H_M30H_ROOT	0x1480
 #define PCI_DEVICE_ID_AMD_17H_M60H_ROOT	0x1630
+#define PCI_DEVICE_ID_AMD_19H_M10H_ROOT	0x14a4
 #define PCI_DEVICE_ID_AMD_17H_DF_F4	0x1464
 #define PCI_DEVICE_ID_AMD_17H_M10H_DF_F4 0x15ec
 #define PCI_DEVICE_ID_AMD_17H_M30H_DF_F4 0x1494
 #define PCI_DEVICE_ID_AMD_17H_M60H_DF_F4 0x144c
 #define PCI_DEVICE_ID_AMD_17H_M70H_DF_F4 0x1444
 #define PCI_DEVICE_ID_AMD_19H_DF_F4	0x1654
+#define PCI_DEVICE_ID_AMD_19H_M10H_DF_F4 0x14b1
 #define PCI_DEVICE_ID_AMD_19H_M40H_ROOT	0x14b5
 #define PCI_DEVICE_ID_AMD_19H_M40H_DF_F4 0x167d
 #define PCI_DEVICE_ID_AMD_19H_M50H_DF_F4 0x166e
@@ -39,6 +41,7 @@ static const struct pci_device_id amd_root_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_ROOT) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M30H_ROOT) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M60H_ROOT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M10H_ROOT) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M40H_ROOT) },
 	{}
 };
@@ -61,6 +64,7 @@ static const struct pci_device_id amd_nb_misc_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_DF_F3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M10H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M40H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M50H_DF_F3) },
 	{}
@@ -78,6 +82,7 @@ static const struct pci_device_id amd_nb_link_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_DF_F4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M10H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M40H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M50H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F4) },
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 64bd3dfba2c4..8df25f1079ba 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1414,8 +1414,8 @@ config SENSORS_PC87427
 	  will be called pc87427.
 
 config SENSORS_NTC_THERMISTOR
-	tristate "NTC thermistor support from Murata"
-	depends on !OF || IIO=n || IIO
+	tristate "NTC thermistor support"
+	depends on IIO
 	depends on THERMAL || !THERMAL_OF
 	help
 	  This driver supports NTC thermistors sensor reading and its
@@ -1513,6 +1513,16 @@ config SENSORS_NZXT_KRAKEN2
 	  This driver can also be built as a module. If so, the module
 	  will be called nzxt-kraken2.
 
+config SENSORS_NZXT_SMART2
+	tristate "NZXT RGB & Fan Controller/Smart Device v2"
+	depends on USB_HID
+	help
+	  If you say yes here you get support for hardware monitoring for the
+	  NZXT RGB & Fan Controller/Smart Device v2.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nzxt-smart2.
+
 source "drivers/hwmon/occ/Kconfig"
 
 config SENSORS_PCF8591
@@ -1872,6 +1882,18 @@ config SENSORS_INA2XX
 	  This driver can also be built as a module. If so, the module
 	  will be called ina2xx.
 
+config SENSORS_INA238
+	tristate "Texas Instruments INA238"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the INA238 power monitor
+	  chip. This driver supports voltage, current, power and temperature
+	  measurements as well as alarm configuration.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called ina238.
+
 config SENSORS_INA3221
 	tristate "Texas Instruments INA3221 Triple Power Monitor"
 	depends on I2C
@@ -1939,6 +1961,7 @@ config SENSORS_TMP108
 config SENSORS_TMP401
 	tristate "Texas Instruments TMP401 and compatibles"
 	depends on I2C
+	select REGMAP
 	help
 	  If you say yes here you get support for Texas Instruments TMP401,
 	  TMP411, TMP431, TMP432, and TMP435 temperature sensor chips.
@@ -2215,6 +2238,30 @@ config SENSORS_ATK0110
 	  This driver can also be built as a module. If so, the module
 	  will be called asus_atk0110.
 
+config SENSORS_ASUS_WMI
+	tristate "ASUS WMI X370/X470/B450/X399"
+	depends on ACPI_WMI
+	help
+	  If you say yes here you get support for the ACPI hardware monitoring
+	  interface found in X370/X470/B450/X399 ASUS motherboards. This driver
+	  will provide readings of fans, voltages and temperatures through the system