Merge ath-next from ath.git

ath.git patches for 4.7. Major changes:

ath6kl

* add ability to set debug uart baud rate with a module parameter

wil6210

* add debugfs file to configure firmware led functionality

24 files changed, 767 insertions, 145 deletions

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index e94cb87380d2..49af62428c88 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -202,6 +202,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca4019 hw1.0",
 		.patch_load_addr = QCA4019_HW_1_0_PATCH_LOAD_ADDR,
 		.uart_pin = 7,
+		.has_shifted_cc_wraparound = true,
 		.otp_exe_param = 0x0010000,
 		.continuous_frag_desc = true,
 		.channel_counters_freq_hz = 125000,
@@ -686,6 +687,9 @@ static void ath10k_core_free_firmware_files(struct ath10k *ar)
 	if (!IS_ERR(ar->cal_file))
 		release_firmware(ar->cal_file);
 
+	if (!IS_ERR(ar->pre_cal_file))
+		release_firmware(ar->pre_cal_file);
+
 	ath10k_swap_code_seg_release(ar);
 
 	ar->normal_mode_fw.fw_file.otp_data = NULL;
@@ -696,6 +700,7 @@ static void ath10k_core_free_firmware_files(struct ath10k *ar)
 	ar->normal_mode_fw.fw_file.firmware_len = 0;
 
 	ar->cal_file = NULL;
+	ar->pre_cal_file = NULL;
 }
 
 static int ath10k_fetch_cal_file(struct ath10k *ar)
@@ -1392,6 +1397,7 @@ static void ath10k_core_restart(struct work_struct *work)
 	complete_all(&ar->install_key_done);
 	complete_all(&ar->vdev_setup_done);
 	complete_all(&ar->thermal.wmi_sync);
+	complete_all(&ar->bss_survey_done);
 	wake_up(&ar->htt.empty_tx_wq);
 	wake_up(&ar->wmi.tx_credits_wq);
 	wake_up(&ar->peer_mapping_wq);
@@ -1724,6 +1730,9 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
 		if (ath10k_peer_stats_enabled(ar))
 			val = WMI_10_4_PEER_STATS;
 
+		if (test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map))
+			val |= WMI_10_4_BSS_CHANNEL_INFO_64;
+
 		status = ath10k_mac_ext_resource_config(ar, val);
 		if (status) {
 			ath10k_err(ar,
@@ -1758,6 +1767,10 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
 		goto err_hif_stop;
 	}
 
+	ar->free_vdev_map = (1LL << ar->max_num_vdevs) - 1;
+
+	INIT_LIST_HEAD(&ar->arvifs);
+
 	/* we don't care about HTT in UTF mode */
 	if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
 		status = ath10k_htt_setup(&ar->htt);
@@ -1771,10 +1784,6 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
 	if (status)
 		goto err_hif_stop;
 
-	ar->free_vdev_map = (1LL << ar->max_num_vdevs) - 1;
-
-	INIT_LIST_HEAD(&ar->arvifs);
-
 	return 0;
 
 err_hif_stop:
@@ -2085,6 +2094,7 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 	init_completion(&ar->install_key_done);
 	init_completion(&ar->vdev_setup_done);
 	init_completion(&ar->thermal.wmi_sync);
+	init_completion(&ar->bss_survey_done);
 
 	INIT_DELAYED_WORK(&ar->scan.timeout, ath10k_scan_timeout_work);
 
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 1379054000f9..1852e0ee3fa1 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -876,6 +876,7 @@ struct ath10k {
 	 * avoid reporting garbage data.
 	 */
 	bool ch_info_can_report_survey;
+	struct completion bss_survey_done;
 
 	struct dfs_pattern_detector *dfs_detector;
 
@@ -883,8 +884,6 @@ struct ath10k {
 
 #ifdef CONFIG_ATH10K_DEBUGFS
 	struct ath10k_debug debug;
-#endif
-
 	struct {
 		/* relay(fs) channel for spectral scan */
 		struct rchan *rfs_chan_spec_scan;
@@ -893,6 +892,7 @@ struct ath10k {
 		enum ath10k_spectral_mode mode;
 		struct ath10k_spec_scan config;
 	} spectral;
+#endif
 
 	struct {
 		/* protected by conf_mutex */
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 0e24f9ee8bff..6dd1d26b357f 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4278,9 +4278,6 @@ static void ath10k_mac_setup_ht_vht_cap(struct ath10k *ar)
 	if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
 		band = &ar->mac.sbands[NL80211_BAND_2GHZ];
 		band->ht_cap = ht_cap;
-
-		/* Enable the VHT support at 2.4 GHz */
-		band->vht_cap = vht_cap;
 	}
 	if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) {
 		band = &ar->mac.sbands[NL80211_BAND_5GHZ];
@@ -4346,7 +4343,7 @@ static int ath10k_start(struct ieee80211_hw *hw)
 
 	/*
 	 * This makes sense only when restarting hw. It is harmless to call
-	 * uncoditionally. This is necessary to make sure no HTT/WMI tx
+	 * unconditionally. This is necessary to make sure no HTT/WMI tx
 	 * commands will be submitted while restarting.
 	 */
 	ath10k_drain_tx(ar);
@@ -6407,6 +6404,39 @@ static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
 	mutex_unlock(&ar->conf_mutex);
 }
 
+static void
+ath10k_mac_update_bss_chan_survey(struct ath10k *ar,
+				  struct ieee80211_channel *channel)
+{
+	int ret;
+	enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (!test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map) ||
+	    (ar->rx_channel != channel))
+		return;
+
+	if (ar->scan.state != ATH10K_SCAN_IDLE) {
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "ignoring bss chan info request while scanning..\n");
+		return;
+	}
+
+	reinit_completion(&ar->bss_survey_done);
+
+	ret = ath10k_wmi_pdev_bss_chan_info_request(ar, type);
+	if (ret) {
+		ath10k_warn(ar, "failed to send pdev bss chan info request\n");
+		return;
+	}
+
+	ret = wait_for_completion_timeout(&ar->bss_survey_done, 3 * HZ);
+	if (!ret) {
+		ath10k_warn(ar, "bss channel survey timed out\n");
+		return;
+	}
+}
+
 static int ath10k_get_survey(struct ieee80211_hw *hw, int idx,
 			     struct survey_info *survey)
 {
@@ -6431,6 +6461,8 @@ static int ath10k_get_survey(struct ieee80211_hw *hw, int idx,
 		goto exit;
 	}
 
+	ath10k_mac_update_bss_chan_survey(ar, survey->channel);
+
 	spin_lock_bh(&ar->data_lock);
 	memcpy(survey, ar_survey, sizeof(*survey));
 	spin_unlock_bh(&ar->data_lock);
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 7fb00dcc03b8..64ebd304f907 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -191,6 +191,9 @@ struct wmi_ops {
 					       u32 fw_feature_bitmap);
 	int (*get_vdev_subtype)(struct ath10k *ar,
 				enum wmi_vdev_subtype subtype);
+	struct sk_buff *(*gen_pdev_bss_chan_info_req)
+					(struct ath10k *ar,
+					 enum wmi_bss_survey_req_type type);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -1361,4 +1364,22 @@ ath10k_wmi_get_vdev_subtype(struct ath10k *ar, enum wmi_vdev_subtype subtype)
 	return ar->wmi.ops->get_vdev_subtype(ar, subtype);
 }
 
+static inline int
+ath10k_wmi_pdev_bss_chan_info_request(struct ath10k *ar,
+				      enum wmi_bss_survey_req_type type)
+{
+	struct ath10k_wmi *wmi = &ar->wmi;
+	struct sk_buff *skb;
+
+	if (!wmi->ops->gen_pdev_bss_chan_info_req)
+		return -EOPNOTSUPP;
+
+	skb = wmi->ops->gen_pdev_bss_chan_info_req(ar, type);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb,
+				   wmi->cmd->pdev_bss_chan_info_request_cmdid);
+}
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 621019f43531..2c300329ebc3 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -521,7 +521,8 @@ static struct wmi_cmd_map wmi_10_2_4_cmd_map = {
 	.vdev_filter_neighbor_rx_packets_cmdid = WMI_CMD_UNSUPPORTED,
 	.mu_cal_start_cmdid = WMI_CMD_UNSUPPORTED,
 	.set_cca_params_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_bss_chan_info_request_cmdid = WMI_CMD_UNSUPPORTED,
+	.pdev_bss_chan_info_request_cmdid =
+		WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
 };
 
 /* 10.4 WMI cmd track */
@@ -1633,6 +1634,7 @@ void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
 	ch->max_power = arg->max_power;
 	ch->reg_power = arg->max_reg_power;
 	ch->antenna_max = arg->max_antenna_gain;
+	ch->max_tx_power = arg->max_power;
 
 	/* mode & flags share storage */
 	ch->mode = arg->mode;
@@ -4792,6 +4794,58 @@ static int ath10k_wmi_event_temperature(struct ath10k *ar, struct sk_buff *skb)
 	return 0;
 }
 
+static int ath10k_wmi_event_pdev_bss_chan_info(struct ath10k *ar,
+					       struct sk_buff *skb)
+{
+	struct wmi_pdev_bss_chan_info_event *ev;
+	struct survey_info *survey;
+	u64 busy, total, tx, rx, rx_bss;
+	u32 freq, noise_floor;
+	u32 cc_freq_hz = ar->hw_params.channel_counters_freq_hz;
+	int idx;
+
+	ev = (struct wmi_pdev_bss_chan_info_event *)skb->data;
+	if (WARN_ON(skb->len < sizeof(*ev)))
+		return -EPROTO;
+
+	freq        = __le32_to_cpu(ev->freq);
+	noise_floor = __le32_to_cpu(ev->noise_floor);
+	busy        = __le64_to_cpu(ev->cycle_busy);
+	total       = __le64_to_cpu(ev->cycle_total);
+	tx          = __le64_to_cpu(ev->cycle_tx);
+	rx          = __le64_to_cpu(ev->cycle_rx);
+	rx_bss      = __le64_to_cpu(ev->cycle_rx_bss);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI,
+		   "wmi event pdev bss chan info:\n freq: %d noise: %d cycle: busy %llu total %llu tx %llu rx %llu rx_bss %llu\n",
+		   freq, noise_floor, busy, total, tx, rx, rx_bss);
+
+	spin_lock_bh(&ar->data_lock);
+	idx = freq_to_idx(ar, freq);
+	if (idx >= ARRAY_SIZE(ar->survey)) {
+		ath10k_warn(ar, "bss chan info: invalid frequency %d (idx %d out of bounds)\n",
+			    freq, idx);
+		goto exit;
+	}
+
+	survey = &ar->survey[idx];
+
+	survey->noise     = noise_floor;
+	survey->time      = div_u64(total, cc_freq_hz);
+	survey->time_busy = div_u64(busy, cc_freq_hz);
+	survey->time_rx   = div_u64(rx_bss, cc_freq_hz);
+	survey->time_tx   = div_u64(tx, cc_freq_hz);
+	survey->filled   |= (SURVEY_INFO_NOISE_DBM |
+			     SURVEY_INFO_TIME |
+			     SURVEY_INFO_TIME_BUSY |
+			     SURVEY_INFO_TIME_RX |
+			     SURVEY_INFO_TIME_TX);
+exit:
+	spin_unlock_bh(&ar->data_lock);
+	complete(&ar->bss_survey_done);
+	return 0;
+}
+
 static void ath10k_wmi_op_rx(struct ath10k *ar, struct sk_buff *skb)
 {
 	struct wmi_cmd_hdr *cmd_hdr;
@@ -5135,6 +5189,9 @@ static void ath10k_wmi_10_2_op_rx(struct ath10k *ar, struct sk_buff *skb)
 	case WMI_10_2_PDEV_TEMPERATURE_EVENTID:
 		ath10k_wmi_event_temperature(ar, skb);
 		break;
+	case WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID:
+		ath10k_wmi_event_pdev_bss_chan_info(ar, skb);
+		break;
 	case WMI_10_2_RTT_KEEPALIVE_EVENTID:
 	case WMI_10_2_GPIO_INPUT_EVENTID:
 	case WMI_10_2_PEER_RATECODE_LIST_EVENTID:
@@ -5212,6 +5269,7 @@ static void ath10k_wmi_10_4_op_rx(struct ath10k *ar, struct sk_buff *skb)
 		ath10k_wmi_event_vdev_stopped(ar, skb);
 		break;
 	case WMI_10_4_WOW_WAKEUP_HOST_EVENTID:
+	case WMI_10_4_PEER_RATECODE_LIST_EVENTID:
 		ath10k_dbg(ar, ATH10K_DBG_WMI,
 			   "received event id %d not implemented\n", id);
 		break;
@@ -5221,6 +5279,9 @@ static void ath10k_wmi_10_4_op_rx(struct ath10k *ar, struct sk_buff *skb)
 	case WMI_10_4_PDEV_TEMPERATURE_EVENTID:
 		ath10k_wmi_event_temperature(ar, skb);
 		break;
+	case WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID:
+		ath10k_wmi_event_pdev_bss_chan_info(ar, skb);
+		break;
 	default:
 		ath10k_warn(ar, "Unknown eventid: %d\n", id);
 		break;
@@ -5606,6 +5667,9 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar)
 	if (ath10k_peer_stats_enabled(ar))
 		features |= WMI_10_2_PEER_STATS;
 
+	if (test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map))
+		features |= WMI_10_2_BSS_CHAN_INFO;
+
 	cmd->resource_config.feature_mask = __cpu_to_le32(features);
 
 	memcpy(&cmd->resource_config.common, &config, sizeof(config));
@@ -6636,6 +6700,26 @@ ath10k_wmi_10_2_op_gen_pdev_get_temperature(struct ath10k *ar)
 	return skb;
 }
 
+static struct sk_buff *
+ath10k_wmi_10_2_op_gen_pdev_bss_chan_info(struct ath10k *ar,
+					  enum wmi_bss_survey_req_type type)
+{
+	struct wmi_pdev_chan_info_req_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	cmd = (struct wmi_pdev_chan_info_req_cmd *)skb->data;
+	cmd->type = __cpu_to_le32(type);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI,
+		   "wmi pdev bss info request type %d\n", type);
+
+	return skb;
+}
+
 /* This function assumes the beacon is already DMA mapped */
 static struct sk_buff *
 ath10k_wmi_op_gen_beacon_dma(struct ath10k *ar, u32 vdev_id, const void *bcn,
@@ -7735,6 +7819,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
 	.gen_init = ath10k_wmi_10_2_op_gen_init,
 	.gen_peer_assoc = ath10k_wmi_10_2_op_gen_peer_assoc,
 	.gen_pdev_get_temperature = ath10k_wmi_10_2_op_gen_pdev_get_temperature,
+	.gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
 
 	/* shared with 10.1 */
 	.map_svc = wmi_10x_svc_map,
@@ -7861,6 +7946,7 @@ static const struct wmi_ops wmi_10_4_ops = {
 	.gen_request_stats = ath10k_wmi_op_gen_request_stats,
 	.gen_pdev_get_temperature = ath10k_wmi_10_2_op_gen_pdev_get_temperature,
 	.get_vdev_subtype = ath10k_wmi_10_4_op_get_vdev_subtype,
+	.gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
 };
 
 int ath10k_wmi_attach(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index db2553522d8b..9fdf47ea27d0 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1444,6 +1444,7 @@ enum wmi_10_2_cmd_id {
 	WMI_10_2_MU_CAL_START_CMDID,
 	WMI_10_2_SET_LTEU_CONFIG_CMDID,
 	WMI_10_2_SET_CCA_PARAMS,
+	WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
 	WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
 };
 
@@ -1487,6 +1488,8 @@ enum wmi_10_2_event_id {
 	WMI_10_2_WDS_PEER_EVENTID,
 	WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
 	WMI_10_2_PDEV_TEMPERATURE_EVENTID,
+	WMI_10_2_MU_REPORT_EVENTID,
+	WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
 	WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
 };
 
@@ -1795,6 +1798,7 @@ struct wmi_channel {
 		__le32 reginfo1;
 		struct {
 			u8 antenna_max;
+			u8 max_tx_power;
 		} __packed;
 	} __packed;
 } __packed;
@@ -2450,6 +2454,7 @@ enum wmi_10_2_feature_mask {
 	WMI_10_2_RX_BATCH_MODE = BIT(0),
 	WMI_10_2_ATF_CONFIG    = BIT(1),
 	WMI_10_2_COEX_GPIO     = BIT(3),
+	WMI_10_2_BSS_CHAN_INFO = BIT(6),
 	WMI_10_2_PEER_STATS    = BIT(7),
 };
 
@@ -6280,6 +6285,17 @@ struct wmi_pdev_temperature_event {
 	__le32 temperature;
 } __packed;
 
+struct wmi_pdev_bss_chan_info_event {
+	__le32 freq;
+	__le32 noise_floor;
+	__le64 cycle_busy;
+	__le64 cycle_total;
+	__le64 cycle_tx;
+	__le64 cycle_rx;
+	__le64 cycle_rx_bss;
+	__le32 reserved;
+} __packed;
+
 /* WOW structures */
 enum wmi_wow_wakeup_event {
 	WOW_BMISS_EVENT = 0,
@@ -6483,6 +6499,16 @@ enum wmi_host_platform_type {
 	WMI_HOST_PLATFORM_LOW_PERF,
 };
 
+enum wmi_bss_survey_req_type {
+	WMI_BSS_SURVEY_REQ_TYPE_READ = 1,
+	WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,
+};
+
+struct wmi_pdev_chan_info_req_cmd {
+	__le32 type;
+	__le32 reserved;
+} __packed;
+
 struct ath10k;
 struct ath10k_vif;
 struct ath10k_fw_stats_pdev;
diff --git a/drivers/net/wireless/ath/ath6kl/core.c b/drivers/net/wireless/ath/ath6kl/core.c
index 4ec02cea0f43..ebb9f163710f 100644
--- a/drivers/net/wireless/ath/ath6kl/core.c
+++ b/drivers/net/wireless/ath/ath6kl/core.c
@@ -31,6 +31,7 @@ unsigned int debug_mask;
 static unsigned int suspend_mode;
 static unsigned int wow_mode;
 static unsigned int uart_debug;
+static unsigned int uart_rate = 115200;
 static unsigned int ath6kl_p2p;
 static unsigned int testmode;
 static unsigned int recovery_enable;
@@ -40,6 +41,7 @@ module_param(debug_mask, uint, 0644);
 module_param(suspend_mode, uint, 0644);
 module_param(wow_mode, uint, 0644);
 module_param(uart_debug, uint, 0644);
+module_param(uart_rate, uint, 0644);
 module_param(ath6kl_p2p, uint, 0644);
 module_param(testmode, uint, 0644);
 module_param(recovery_enable, uint, 0644);
@@ -180,6 +182,7 @@ int ath6kl_core_init(struct ath6kl *ar, enum ath6kl_htc_type htc_type)
 
 	if (uart_debug)
 		ar->conf_flags |= ATH6KL_CONF_UART_DEBUG;
+	ar->hw.uarttx_rate = uart_rate;
 
 	set_bit(FIRST_BOOT, &ar->flag);
 
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 713a571a27ce..7a1970e484a6 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -781,6 +781,7 @@ struct ath6kl {
 		u32 board_addr;
 		u32 refclk_hz;
 		u32 uarttx_pin;
+		u32 uarttx_rate;
 		u32 testscript_addr;
 		u8 tx_ant;
 		u8 rx_ant;
diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index da557dc742e6..58fb227a849f 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -173,6 +173,7 @@ static const struct ath6kl_hw hw_list[] = {
 		.reserved_ram_size		= 7168,
 		.board_addr			= 0x436400,
 		.testscript_addr		= 0,
+		.uarttx_pin			= 11,
 		.flags				= 0,
 
 		.fw = {
@@ -650,6 +651,14 @@ int ath6kl_configure_target(struct ath6kl *ar)
 	if (status)
 		return status;
 
+	/* Only set the baud rate if we're actually doing debug */
+	if (ar->conf_flags & ATH6KL_CONF_UART_DEBUG) {
+		status = ath6kl_bmi_write_hi32(ar, hi_desired_baud_rate,
+					       ar->hw.uarttx_rate);
+		if (status)
+			return status;
+	}
+
 	/* Configure target refclk_hz */
 	if (ar->hw.refclk_hz != 0) {
 		status = ath6kl_bmi_write_hi32(ar, hi_refclk_hz,
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 40fa915d6f35..f68cb00450e0 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -75,6 +75,26 @@ config ATH9K_STATION_STATISTICS
 	---help---
 	  This option enables detailed statistics for association stations.
 
+config ATH9K_TX99
+	bool "Atheros ath9k TX99 testing support"
+	depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS
+	default n
+	---help---
+	  Say N. This should only be enabled on systems undergoing
+	  certification testing and evaluation in a controlled environment.
+	  Enabling this will only enable TX99 support, all other modes of
+	  operation will be disabled.
+
+	  TX99 support enables Specific Absorption Rate (SAR) testing.
+	  SAR is the unit of measurement for the amount of radio frequency(RF)
+	  absorbed by the body when using a wireless device. The RF exposure
+	  limits used are expressed in the terms of SAR, which is a measure
+	  of the electric and magnetic field strength and power density for
+	  transmitters operating at frequencies from 300 kHz to 100 GHz.
+	  Regulatory bodies around the world require that wireless device
+	  be evaluated to meet the RF exposure limits set forth in the
+	  governmental SAR regulations.
+
 config ATH9K_DFS_CERTIFIED
 	bool "Atheros DFS support for certified platforms"
 	depends on ATH9K && CFG80211_CERTIFICATION_ONUS
@@ -103,26 +123,6 @@ config ATH9K_DYNACK
 	  based on ACK frame RX timestamp, TX frame timestamp and frame
 	  duration
 
-config ATH9K_TX99
-	bool "Atheros ath9k TX99 testing support"
-	depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS
-	default n
-	---help---
-	  Say N. This should only be enabled on systems undergoing
-	  certification testing and evaluation in a controlled environment.
-	  Enabling this will only enable TX99 support, all other modes of
-	  operation will be disabled.
-
-	  TX99 support enables Specific Absorption Rate (SAR) testing.
-	  SAR is the unit of measurement for the amount of radio frequency(RF)
-	  absorbed by the body when using a wireless device. The RF exposure
-	  limits used are expressed in the terms of SAR, which is a measure
-	  of the electric and magnetic field strength and power density for
-	  transmitters operating at frequencies from 300 kHz to 100 GHz.
-	  Regulatory bodies around the world require that wireless device
-	  be evaluated to meet the RF exposure limits set forth in the
-	  governmental SAR regulations.
-
 config ATH9K_WOW
 	bool "Wake on Wireless LAN support (EXPERIMENTAL)"
 	depends on ATH9K && PM
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index f68098284c43..dec1a317a070 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -4402,7 +4402,7 @@ static void ar9003_hw_selfgen_tpc_txpower(struct ath_hw *ah,
 }
 
 /* Set tx power registers to array of values passed in */
-static int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray)
+int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray)
 {
 #define POW_SM(_r, _s)     (((_r) & 0x3f) << (_s))
 	/* make sure forced gain is not set */
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
index 694ca2e680e5..107bcfbbe0fb 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
@@ -355,5 +355,6 @@ unsigned int ar9003_get_paprd_scale_factor(struct ath_hw *ah,
 					   struct ath9k_channel *chan);
 
 void ar9003_hw_internal_regulator_apply(struct ath_hw *ah);
+int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray);
 
 #endif
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index be14a8e01916..ae3043559b6d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -17,6 +17,7 @@
 #include <linux/export.h>
 #include "hw.h"
 #include "ar9003_phy.h"
+#include "ar9003_eeprom.h"
 
 #define AR9300_OFDM_RATES	8
 #define AR9300_HT_SS_RATES	8
@@ -1009,7 +1010,7 @@ static void ar9003_hw_set_rfmode(struct ath_hw *ah,
 	if (IS_CHAN_A_FAST_CLOCK(ah, chan))
 		rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE);
 
-	if (rfMode & (AR_PHY_MODE_QUARTER | AR_PHY_MODE_HALF))
+	if (IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan))
 		REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL,
 			      AR_PHY_FRAME_CTL_CF_OVERLAP_WINDOW, 3);
 
@@ -1840,73 +1841,14 @@ static void ar9003_hw_tx99_stop(struct ath_hw *ah)
 
 static void ar9003_hw_tx99_set_txpower(struct ath_hw *ah, u8 txpower)
 {
-	static s16 p_pwr_array[ar9300RateSize] = { 0 };
+	static u8 p_pwr_array[ar9300RateSize] = { 0 };
 	unsigned int i;
 
-	if (txpower <= MAX_RATE_POWER) {
-		for (i = 0; i < ar9300RateSize; i++)
-			p_pwr_array[i] = txpower;
-	} else {
-		for (i = 0; i < ar9300RateSize; i++)
-			p_pwr_array[i] = MAX_RATE_POWER;
-	}
+	txpower = txpower <= MAX_RATE_POWER ? txpower : MAX_RATE_POWER;
+	for (i = 0; i < ar9300RateSize; i++)
+		p_pwr_array[i] = txpower;
 
-	REG_WRITE(ah, 0xa458, 0);
-
-	REG_WRITE(ah, 0xa3c0,
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 24) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 16) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24],  8) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24],  0));
-	REG_WRITE(ah, 0xa3c4,
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_54],  24) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_48],  16) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_36],   8) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 0));
-	REG_WRITE(ah, 0xa3c8,
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 24) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 16) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L],  0));
-	REG_WRITE(ah, 0xa3cc,
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_11S],   24) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_11L],   16) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_5S],     8) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L],  0));
-	REG_WRITE(ah, 0xa3d0,
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_5],  24) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_4],  16) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_1_3_9_11_17_19], 8)|
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_0_8_16], 0));
-	REG_WRITE(ah, 0xa3d4,
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_13], 24) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_12], 16) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_7],   8) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_6],   0));
-	REG_WRITE(ah, 0xa3e4,
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_21], 24) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_20], 16) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_15],  8) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_14],  0));
-	REG_WRITE(ah, 0xa3e8,
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_23], 24) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_22], 16) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_23],  8) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT20_22],  0));
-	REG_WRITE(ah, 0xa3d8,
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_5], 24) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_4], 16) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_1_3_9_11_17_19], 8) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_0_8_16], 0));
-	REG_WRITE(ah, 0xa3dc,
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_13], 24) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_12], 16) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_7],   8) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_6],   0));
-	REG_WRITE(ah, 0xa3ec,
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_21], 24) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_20], 16) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_15],  8) |
-		  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_14],  0));
+	ar9003_hw_tx_power_regwrite(ah, p_pwr_array);
 }
 
 static void ar9003_hw_init_txpower_cck(struct ath_hw *ah, u8 *rate_array)
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
index d74d781f4c8d..d93e3fd73831 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.h
+++ b/drivers/net/wireless/ath/wcn36xx/smd.h
@@ -24,7 +24,7 @@
 
 #define WCN36XX_HAL_BUF_SIZE				4096
 
-#define HAL_MSG_TIMEOUT 500
+#define HAL_MSG_TIMEOUT 10000
 #define WCN36XX_SMSM_WLAN_TX_ENABLE			0x00000400
 #define WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY		0x00000200
 /* The PNO version info be contained in the rsp msg */
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 0fb3a7941d84..5769811291bf 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -375,8 +375,9 @@ static int wil_cfg80211_scan(struct wiphy *wiphy,
 		return -EBUSY;
 	}
 
-	/* scan on P2P_DEVICE is handled as p2p search */
-	if (wdev->iftype == NL80211_IFTYPE_P2P_DEVICE) {
+	/* social scan on P2P_DEVICE is handled as p2p search */
+	if (wdev->iftype == NL80211_IFTYPE_P2P_DEVICE &&
+	    wil_p2p_is_social_scan(request)) {
 		wil->scan_request = request;
 		wil->radio_wdev = wdev;
 		rc = wil_p2p_search(wil, request);
diff --git a/drivers/net/wireless/ath/wil6210/debug.c b/drivers/net/wireless/ath/wil6210/debug.c
index 3249562d93b4..c312a667c12a 100644
--- a/drivers/net/wireless/ath/wil6210/debug.c
+++ b/drivers/net/wireless/ath/wil6210/debug.c
@@ -17,7 +17,7 @@
 #include "wil6210.h"
 #include "trace.h"
 
-void wil_err(struct wil6210_priv *wil, const char *fmt, ...)
+void __wil_err(struct wil6210_priv *wil, const char *fmt, ...)
 {
 	struct net_device *ndev = wil_to_ndev(wil);
 	struct va_format vaf = {
@@ -32,7 +32,7 @@ void wil_err(struct wil6210_priv *wil, const char *fmt, ...)
 	va_end(args);
 }
 
-void wil_err_ratelimited(struct wil6210_priv *wil, const char *fmt, ...)
+void __wil_err_ratelimited(struct wil6210_priv *wil, const char *fmt, ...)
 {
 	if (net_ratelimit()) {
 		struct net_device *ndev = wil_to_ndev(wil);
@@ -49,7 +49,23 @@ void wil_err_ratelimited(struct wil6210_priv *wil, const char *fmt, ...)
 	}
 }