diff options
| author | Shen Lichuan <shenlichuan@vivo.com> | 2024-09-30 10:25:26 +0800 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2024-10-04 15:08:53 +0200 |
| commit | 57d7a6b93822f7482275ae4502dae99439ddee0e (patch) | |
| tree | 23560f0b10ac4acb2eddfc54b32c2f5c69c6131f | |
| parent | c837ce6020efaa70ff823129444fc3cb77bce9b6 (diff) | |
| download | linux-57d7a6b93822f7482275ae4502dae99439ddee0e.tar.gz linux-57d7a6b93822f7482275ae4502dae99439ddee0e.tar.bz2 linux-57d7a6b93822f7482275ae4502dae99439ddee0e.zip | |
usb: dwc3: Correct some typos in comments
Fixed some confusing typos that were currently identified with codespell,
the details are as follows:
-in the code comments:
drivers/usb/dwc3/core.c:1406: feild ==> field
drivers/usb/dwc3/core.h:84: boundries ==> boundaries
drivers/usb/dwc3/ep0.c:148: issueing ==> issuing
drivers/usb/dwc3/host.c:38: temperary ==> temporarily
Also fixed a syntax problem in the comments.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://lore.kernel.org/r/20240930022526.7255-1-shenlichuan@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| -rw-r--r-- | drivers/usb/dwc3/core.c | 2 | ||||
| -rw-r--r-- | drivers/usb/dwc3/core.h | 2 | ||||
| -rw-r--r-- | drivers/usb/dwc3/ep0.c | 2 | ||||
| -rw-r--r-- | drivers/usb/dwc3/host.c | 2 |
4 files changed, 4 insertions, 4 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 9eb085f359ce..3612a57f7877 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1403,7 +1403,7 @@ static int dwc3_core_init(struct dwc3 *dwc) /* * When configured in HOST mode, after issuing U3/L2 exit controller - * fails to send proper CRC checksum in CRC5 feild. Because of this + * fails to send proper CRC checksum in CRC5 field. Because of this * behaviour Transaction Error is generated, resulting in reset and * re-enumeration of usb device attached. All the termsel, xcvrsel, * opmode becomes 0 during end of resume. Enabling bit 10 of GUCTL1 diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index c71240e8f7c7..2cb88e08e746 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -81,7 +81,7 @@ #define DWC3_GSNPSREV_MASK 0xffff #define DWC3_GSNPS_ID(p) (((p) & DWC3_GSNPSID_MASK) >> 16) -/* DWC3 registers memory space boundries */ +/* DWC3 registers memory space boundaries */ #define DWC3_XHCI_REGS_START 0x0 #define DWC3_XHCI_REGS_END 0x7fff #define DWC3_GLOBALS_REGS_START 0xc100 diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index c9533a99e47c..f3d97ad5156e 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -145,7 +145,7 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, * Unfortunately we have uncovered a limitation wrt the Data Phase. * * Section 9.4 says we can wait for the XferNotReady(DATA) event to - * come before issueing Start Transfer command, but if we do, we will + * come before issuing Start Transfer command, but if we do, we will * miss situations where the host starts another SETUP phase instead of * the DATA phase. Such cases happen at least on TD.7.6 of the Link * Layer Compliance Suite. diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index e0533cee6870..b48e108fc8fe 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -35,7 +35,7 @@ static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc) u32 reg; int i; - /* xhci regs is not mapped yet, do it temperary here */ + /* xhci regs are not mapped yet, do it temporarily here */ if (dwc->xhci_resources[0].start) { xhci_regs = ioremap(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END); if (!xhci_regs) { |