Merge tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform drivers updates from Hans de Goede:

 - asus-wmi: Add support for vivobook fan profiles

 - dell-laptop: Add knobs to change battery charge settings

 - lg-laptop: Add operation region support

 - intel-uncore-freq: Add support for efficiency latency control

 - intel/ifs: Add SBAF test support

 - intel/pmc: Ignore all LTRs during suspend

 - platform/surface: Support for arm64 based Surface devices

 - wmi: Pass event data directly to legacy notify handlers

 - x86/platform/geode: switch GPIO buttons and LEDs to software
   properties

 - bunch of small cleanups, fixes, hw-id additions, etc.

* tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
  MAINTAINERS: adjust file entry in INTEL MID PLATFORM
  platform/x86: x86-android-tablets: Adjust Xiaomi Pad 2 bottom bezel touch buttons LED
  platform/mellanox: mlxbf-pmc: fix lockdep warning
  platform/x86/amd: pmf: Add quirk for TUF Gaming A14
  platform/x86: touchscreen_dmi: add nanote-next quirk
  platform/x86: asus-wmi: don't fail if platform_profile already registered
  platform/x86: asus-wmi: add debug print in more key places
  platform/x86: intel_scu_wdt: Move intel_scu_wdt.h to x86 subfolder
  platform/x86: intel_scu_ipc: Move intel_scu_ipc.h out of arch/x86/include/asm
  MAINTAINERS: Add Intel MID section
  platform/x86: panasonic-laptop: Add support for programmable buttons
  platform/olpc: Remove redundant null pointer checks in olpc_ec_setup_debugfs()
  platform/x86: intel/pmc: Ignore all LTRs during suspend
  platform/x86: wmi: Call both legacy and WMI driver notify handlers
  platform/x86: wmi: Merge get_event_data() with wmi_get_notify_data()
  platform/x86: wmi: Remove wmi_get_event_data()
  platform/x86: wmi: Pass event data directly to legacy notify handlers
  platform/x86: thinkpad_acpi: Fix uninitialized symbol 's' warning
  platform/x86: x86-android-tablets: Fix spelling in the comments
  platform/x86: ideapad-laptop: Make the scope_guard() clear of its scope
  ...

101 files changed, 2723 insertions, 1060 deletions

diff --git a/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst b/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst
index 5ab3440e6cee..5151ec312dc0 100644
--- a/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst
+++ b/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst
@@ -113,3 +113,62 @@ to apply at each uncore* level.
 
 Support for "current_freq_khz" is available only at each fabric cluster
 level (i.e., in uncore* directory).
+
+Efficiency vs. Latency Tradeoff
+-------------------------------
+
+The Efficiency Latency Control (ELC) feature improves performance
+per watt. With this feature hardware power management algorithms
+optimize trade-off between latency and power consumption. For some
+latency sensitive workloads further tuning can be done by SW to
+get desired performance.
+
+The hardware monitors the average CPU utilization across all cores
+in a power domain at regular intervals and decides an uncore frequency.
+While this may result in the best performance per watt, workload may be
+expecting higher performance at the expense of power. Consider an
+application that intermittently wakes up to perform memory reads on an
+otherwise idle system. In such cases, if hardware lowers uncore
+frequency, then there may be delay in ramp up of frequency to meet
+target performance.
+
+The ELC control defines some parameters which can be changed from SW.
+If the average CPU utilization is below a user-defined threshold
+(elc_low_threshold_percent attribute below), the user-defined uncore
+floor frequency will be used (elc_floor_freq_khz attribute below)
+instead of hardware calculated minimum.
+
+Similarly in high load scenario where the CPU utilization goes above
+the high threshold value (elc_high_threshold_percent attribute below)
+instead of jumping to maximum uncore frequency, frequency is increased
+in 100MHz steps. This avoids consuming unnecessarily high power
+immediately with CPU utilization spikes.
+
+Attributes for efficiency latency control:
+
+``elc_floor_freq_khz``
+	This attribute is used to get/set the efficiency latency floor frequency.
+	If this variable is lower than the 'min_freq_khz', it is ignored by
+	the firmware.
+
+``elc_low_threshold_percent``
+	This attribute is used to get/set the efficiency latency control low
+	threshold. This attribute is in percentages of CPU utilization.
+
+``elc_high_threshold_percent``
+	This attribute is used to get/set the efficiency latency control high
+	threshold. This attribute is in percentages of CPU utilization.
+
+``elc_high_threshold_enable``
+	This attribute is used to enable/disable the efficiency latency control
+	high threshold. Write '1' to enable, '0' to disable.
+
+Example system configuration below, which does following:
+  * when CPU utilization is less than 10%: sets uncore frequency to 800MHz
+  * when CPU utilization is higher than 95%: increases uncore frequency in
+    100MHz steps, until power limit is reached
+
+  elc_floor_freq_khz:800000
+  elc_high_threshold_percent:95
+  elc_high_threshold_enable:1
+  elc_low_threshold_percent:10
diff --git a/Documentation/devicetree/bindings/platform/microsoft,surface-sam.yaml b/Documentation/devicetree/bindings/platform/microsoft,surface-sam.yaml
new file mode 100644
index 000000000000..b33d26f15b2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/platform/microsoft,surface-sam.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/platform/microsoft,surface-sam.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Surface System Aggregator Module (SAM, SSAM)
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  Surface devices use a standardized embedded controller to let the
+  operating system interface with various hardware functions. The
+  specific functionalities are modeled as subdevices and matched on
+  five levels: domain, category, target, instance and function.
+
+properties:
+  compatible:
+    const: microsoft,surface-sam
+
+  interrupts:
+    maxItems: 1
+
+  current-speed: true
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    uart {
+        embedded-controller {
+            compatible = "microsoft,surface-sam";
+
+            interrupts-extended = <&tlmm 91 IRQ_TYPE_EDGE_RISING>;
+
+            pinctrl-0 = <&ssam_state>;
+            pinctrl-names = "default";
+
+            current-speed = <4000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
index 30c85768d980..6aa9cfae417b 100644
--- a/Documentation/devicetree/bindings/serial/serial.yaml
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -88,7 +88,7 @@ properties:
       TX FIFO threshold configuration (in bytes).
 
 patternProperties:
-  "^(bluetooth|bluetooth-gnss|gnss|gps|mcu|onewire)$":
+  "^(bluetooth|bluetooth-gnss|embedded-controller|gnss|gps|mcu|onewire)$":
     if:
       type: object
     then:
diff --git a/MAINTAINERS b/MAINTAINERS
index f550e7b1f1cc..cd8a9b9aaa1e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11552,6 +11552,24 @@ S:	Maintained
 F:	Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update
 F:	drivers/fpga/intel-m10-bmc-sec-update.c
 
+INTEL MID (Mobile Internet Device) PLATFORM
+M:	Andy Shevchenko <andy@kernel.org>
+L:	linux-kernel@vger.kernel.org
+S:	Supported
+F:	arch/x86/include/asm/intel-mid.h
+F:	arch/x86/pci/intel_mid_pci.c
+F:	arch/x86/platform/intel-mid/
+F:	drivers/extcon/extcon-intel-mrfld.c
+F:	drivers/iio/adc/intel_mrfld_adc.c
+F:	drivers/mfd/intel_soc_pmic_mrfld.c
+F:	drivers/platform/x86/intel/mrfld_pwrbtn.c
+F:	drivers/platform/x86/intel_scu_*
+F:	drivers/staging/media/atomisp/
+F:	drivers/watchdog/intel-mid_wdt.c
+F:	include/linux/mfd/intel_soc_pmic_mrfld.h
+F:	include/linux/platform_data/x86/intel-mid_wdt.h
+F:	include/linux/platform_data/x86/intel_scu_ipc.h
+
 INTEL P-Unit IPC DRIVER
 M:	Zha Qipeng <qipeng.zha@intel.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -11614,8 +11632,8 @@ F:	drivers/counter/intel-qep.c
 INTEL SCU DRIVERS
 M:	Mika Westerberg <mika.westerberg@linux.intel.com>
 S:	Maintained
-F:	arch/x86/include/asm/intel_scu_ipc.h
 F:	drivers/platform/x86/intel_scu_*
+F:	include/linux/platform_data/x86/intel_scu_ipc.h
 
 INTEL SDSI DRIVER
 M:	David E. Box <david.e.box@linux.intel.com>
@@ -11690,7 +11708,8 @@ F:	drivers/platform/x86/intel/uncore-frequency/
 INTEL VENDOR SPECIFIC EXTENDED CAPABILITIES DRIVER
 M:	David E. Box <david.e.box@linux.intel.com>
 S:	Supported
-F:	drivers/platform/x86/intel/vsec.*
+F:	drivers/platform/x86/intel/vsec.c
+F:	include/linux/intel_vsec.h
 
 INTEL VIRTUAL BUTTON DRIVER
 M:	AceLan Kao <acelan.kao@ca