Merge tag 'tty-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the "big" TTY/Serial patch updates for 4.12-rc1

  Not a lot of new things here, the normal number of serial driver
  updates and additions, tiny bugs fixed, and some core files split up
  to make future changes a bit easier for Nicolas's "tiny-tty" work.

  All of these have been in linux-next for a while"

* tag 'tty-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (62 commits)
  serial: small Makefile reordering
  tty: split job control support into a file of its own
  tty: move baudrate handling code to a file of its own
  console: move console_init() out of tty_io.c
  serial: 8250_early: Add earlycon support for Palmchip UART
  tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44
  vt: make mouse selection of non-ASCII consistent
  vt: set mouse selection word-chars to gpm's default
  imx-serial: Reduce RX DMA startup latency when opening for reading
  serial: omap: suspend device on probe errors
  serial: omap: fix runtime-pm handling on unbind
  tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT init
  serial: samsung: Remove useless spinlock
  serial: samsung: Add missing checks for dma_map_single failure
  serial: samsung: Use right device for DMA-mapping calls
  serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off
  tty: fix comment typo s/repsonsible/responsible/
  tty: amba-pl011: Fix spurious TX interrupts
  serial: xuartps: Enable clocks in the pm disable case also
  serial: core: Re-use struct uart_port {name} field
  ...

48 files changed, 1393 insertions, 1031 deletions

diff --git a/Documentation/devicetree/bindings/arm/sprd.txt b/Documentation/devicetree/bindings/arm/sprd.txt
index 31a629dc75b8..3df034b13e28 100644
--- a/Documentation/devicetree/bindings/arm/sprd.txt
+++ b/Documentation/devicetree/bindings/arm/sprd.txt
@@ -1,11 +1,14 @@
 Spreadtrum SoC Platforms Device Tree Bindings
 ----------------------------------------------------
 
-Sharkl64 is a Spreadtrum's SoC Platform which is based
-on ARM 64-bit processor.
+SC9836 openphone Board
+Required root node properties:
+	- compatible = "sprd,sc9836-openphone", "sprd,sc9836";
 
-SC9836 openphone board with SC9836 SoC based on the
-Sharkl64 Platform shall have the following properties.
+SC9860 SoC
+Required root node properties:
+	- compatible = "sprd,sc9860"
 
+SP9860G 3GFHD Board
 Required root node properties:
-        - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
+	- compatible = "sprd,sp9860g-1h10", "sprd,sc9860";
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt
index 2aff0f22c9fa..cab40f0f6f49 100644
--- a/Documentation/devicetree/bindings/serial/sprd-uart.txt
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt
@@ -1,7 +1,19 @@
 * Spreadtrum serial UART
 
 Required properties:
-- compatible: must be "sprd,sc9836-uart"
+- compatible: must be one of:
+  * "sprd,sc9836-uart"
+  * "sprd,sc9860-uart", "sprd,sc9836-uart"
+
 - reg: offset and length of the register set for the device
 - interrupts: exactly one interrupt specifier
 - clocks: phandles to input clocks.
+
+Example:
+	uart0: serial@0 {
+		compatible = "sprd,sc9860-uart",
+			     "sprd,sc9836-uart";
+		reg = <0x0 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&ext_26m>;
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 08360bb0468b..56b1111cc9c1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8418,7 +8418,7 @@ MICROCHIP / ATMEL AT91 / AT32 SERIAL DRIVER
 M:	Richard Genoud <richard.genoud@gmail.com>
 S:	Maintained
 F:	drivers/tty/serial/atmel_serial.c
-F:	include/linux/atmel_serial.h
+F:	drivers/tty/serial/atmel_serial.h
 
 MICROCHIP / ATMEL DMA DRIVER
 M:	Ludovic Desroches <ludovic.desroches@microchip.com>
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index b95bed92da9f..f02becdb3e33 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_TTY)		+= tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \
-				   tty_buffer.o tty_port.o tty_mutex.o tty_ldsem.o
+				   tty_buffer.o tty_port.o tty_mutex.o \
+				   tty_ldsem.o tty_baudrate.o tty_jobctrl.o
 obj-$(CONFIG_LEGACY_PTYS)	+= pty.o
 obj-$(CONFIG_UNIX98_PTYS)	+= pty.o
 obj-$(CONFIG_AUDIT)		+= tty_audit.o
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index b19ae36a05ec..a8d399188242 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -920,17 +920,17 @@ int hvc_remove(struct hvc_struct *hp)
 
 	tty = tty_port_tty_get(&hp->port);
 
+	console_lock();
 	spin_lock_irqsave(&hp->lock, flags);
 	if (hp->index < MAX_NR_HVC_CONSOLES) {
-		console_lock();
 		vtermnos[hp->index] = -1;
 		cons_ops[hp->index] = NULL;
-		console_unlock();
 	}
 
 	/* Don't whack hp->irq because tty_hangup() will need to free the irq. */
 
 	spin_unlock_irqrestore(&hp->lock, flags);
+	console_unlock();
 
 	/*
 	 * We 'put' the instance that was grabbed when the kref instance
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 7823d6d998cf..99bb875178d7 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1575,7 +1575,7 @@ static int __init hvcs_module_init(void)
 	 */
 	rc = driver_create_file(&(hvcs_vio_driver.driver), &driver_attr_rescan);
 	if (rc)
-		pr_warning("HVCS: Failed to create rescan file (err %d)\n", rc);
+		pr_warn("HVCS: Failed to create rescan file (err %d)\n", rc);
 
 	return 0;
 }
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 55577cf9b6a4..2667a205a5ab 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -89,18 +89,14 @@ module_param(debug, int, 0600);
 /**
  *	struct gsm_mux_net	-	network interface
  *	@struct gsm_dlci* dlci
- *	@struct net_device_stats stats;
  *
  *	Created when net interface is initialized.
  **/
 struct gsm_mux_net {
 	struct kref ref;
 	struct gsm_dlci *dlci;
-	struct net_device_stats stats;
 };
 
-#define STATS(net) (((struct gsm_mux_net *)netdev_priv(net))->stats)
-
 /*
  *	Each block of data we have queued to go out is in the form of
  *	a gsm_msg which holds everything we need in a link layer independent
@@ -2613,10 +2609,6 @@ static int gsm_mux_net_close(struct net_device *net)
 	return 0;
 }
 
-static struct net_device_stats *gsm_mux_net_get_stats(struct net_device *net)
-{
-	return &((struct gsm_mux_net *)netdev_priv(net))->stats;
-}
 static void dlci_net_free(struct gsm_dlci *dlci)
 {
 	if (!dlci->net) {
@@ -2660,8 +2652,8 @@ static int gsm_mux_net_start_xmit(struct sk_buff *skb,
 	muxnet_get(mux_net);
 
 	skb_queue_head(&dlci->skb_list, skb);
-	STATS(net).tx_packets++;
-	STATS(net).tx_bytes += skb->len;
+	net->stats.tx_packets++;
+	net->stats.tx_bytes += skb->len;
 	gsm_dlci_data_kick(dlci);
 	/* And tell the kernel when the last transmit started. */
 	netif_trans_update(net);
@@ -2676,7 +2668,7 @@ static void gsm_mux_net_tx_timeout(struct net_device *net)
 	dev_dbg(&net->dev, "Tx timed out.\n");
 
 	/* Update statistics */
-	STATS(net).tx_errors++;
+	net->stats.tx_errors++;
 }
 
 static void gsm_mux_rx_netchar(struct gsm_dlci *dlci,
@@ -2691,7 +2683,7 @@ static void gsm_mux_rx_netchar(struct gsm_dlci *dlci,
 	skb = dev_alloc_skb(size + NET_IP_ALIGN);
 	if (!skb) {
 		/* We got no receive buffer. */
-		STATS(net).rx_dropped++;
+		net->stats.rx_dropped++;
 		muxnet_put(mux_net);
 		return;
 	}
@@ -2705,8 +2697,8 @@ static void gsm_mux_rx_netchar(struct gsm_dlci *dlci,
 	netif_rx(skb);
 
 	/* update out statistics */
-	STATS(net).rx_packets++;
-	STATS(net).rx_bytes += size;
+	net->stats.rx_packets++;
+	net->stats.rx_bytes += size;
 	muxnet_put(mux_net);
 	return;
 }
@@ -2718,7 +2710,6 @@ static void gsm_mux_net_init(struct net_device *net)
 		.ndo_stop		= gsm_mux_net_close,
 		.ndo_start_xmit		= gsm_mux_net_start_xmit,
 		.ndo_tx_timeout		= gsm_mux_net_tx_timeout,
-		.ndo_get_stats		= gsm_mux_net_get_stats,
 	};
 
 	net->netdev_ops = &gsm_netdev_ops;
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 66b59a15780d..65799575c666 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -216,16 +216,11 @@ static int pty_signal(struct tty_struct *tty, int sig)
 static void pty_flush_buffer(struct tty_struct *tty)
 {
 	struct tty_struct *to = tty->link;
-	struct tty_ldisc *ld;
 
 	if (!to)
 		return;
 
-	ld = tty_ldisc_ref(to);
-	tty_buffer_flush(to, ld);
-	if (ld)
-		tty_ldisc_deref(ld);
-
+	tty_buffer_flush(to, NULL);
 	if (to->packet) {
 		spin_lock_irq(&tty->ctrl_lock);
 		tty->ctrl_status |= TIOCPKT_FLUSHWRITE;
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index 1c4829a56351..433de5ea9b02 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -116,17 +116,41 @@ void serdev_device_close(struct serdev_device *serdev)
 }
 EXPORT_SYMBOL_GPL(serdev_device_close);
 
-int serdev_device_write_buf(struct serdev_device *serdev,
-			    const unsigned char *buf, size_t count)
+void serdev_device_write_wakeup(struct serdev_device *serdev)
+{
+	complete(&serdev->write_comp);
+}
+EXPORT_SYMBOL_GPL(serdev_device_write_wakeup);
+
+int serdev_device_write(struct serdev_device *serdev,
+			const unsigned char *buf, size_t count,
+			unsigned long timeout)
 {
 	struct serdev_controller *ctrl = serdev->ctrl;
+	int ret;
 
-	if (!ctrl || !ctrl->ops->write_buf)
+	if (!ctrl || !ctrl->ops->write_buf ||
+	    (timeout && !serdev->ops->write_wakeup))
 		return -EINVAL;
 
-	return ctrl->ops->write_buf(ctrl, buf, count);
+	mutex_lock(&serdev->write_lock);
+	do {
+		reinit_completion(&serdev->write_comp);
+
+		ret = ctrl->ops->write_buf(ctrl, buf, count);
+		if (ret < 0)
+			break;
+
+		buf += ret;
+		count -= ret;
+
+	} while (count &&
+		 (timeout = wait_for_completion_timeout(&serdev->write_comp,
+							timeout)));
+	mutex_unlock(&serdev->write_lock);
+	return ret < 0 ? ret : (count ? -ETIMEDOUT : 0);
 }
-EXPORT_SYMBOL_GPL(serdev_device_write_buf);
+EXPORT_SYMBOL_GPL(serdev_device_write);
 
 void serdev_device_write_flush(struct serdev_device *serdev)
 {
@@ -262,6 +286,8 @@ struct serdev_device *serdev_device_alloc(struct serdev_controller *ctrl)
 	serdev->dev.parent = &ctrl->dev;
 	serdev->dev.bus = &serdev_bus_type;
 	serdev->dev.type = &serdev_device_type;
+	init_completion(&serdev->write_comp);
+	mutex_init(&serdev->write_lock);
 	return serdev;
 }
 EXPORT_SYMBOL_GPL(serdev_device_alloc);
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 76e03a7de9cc..48a07e2f617f 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -218,7 +218,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
 		spin_unlock_irq(&i->lock);
 		irq_flags |= up->port.irqflags;
 		ret = request_irq(up->port.irq, serial8250_interrupt,
-				  irq_flags, "serial", i);
+				  irq_flags, up->port.name, i);
 		if (ret < 0)
 			serial_do_unlink(i, up);
 	}
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index e65808c482f1..787b1160d3a5 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -530,12 +530,11 @@ static int dw8250_probe(struct platform_device *pdev)
 	}
 
 	data->rst = devm_reset_control_get_optional(dev, NULL);
-	if (IS_ERR(data->rst) && PTR_ERR(data->rst) == -EPROBE_DEFER) {
-		err = -EPROBE_DEFER;
+	if (IS_ERR(data->rst)) {
+		err = PTR_ERR(data->rst);
 		goto err_pclk;
 	}
-	if (!IS_ERR(data->rst))
-		reset_control_deassert(data->rst);
+	reset_control_deassert(data->rst);
 
 	dw8250_quirks(p, data);
 
@@ -567,8 +566,7 @@ static int dw8250_probe(struct platform_device *pdev)
 	return 0;
 
 err_reset:
-	if (!IS_ERR(data->rst))
-		reset_control_assert(data->rst);
+	reset_control_assert(data->rst);
 
 err_pclk:
 	if (!IS_ERR(data->pclk))
@@ -589,8 +587,7 @@ static int dw8250_remove(struct platform_device *pdev)
 
 	serial8250_unregister_port(data->line);
 
-	if (!IS_ERR(data->rst))
-		reset_control_assert(data->rst);
+	reset_control_assert(data->rst);
 
 	if (!IS_ERR(data->pclk))
 		clk_disable_unprepare(data->pclk);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 85a12f032402..82fc48eca1df 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -39,6 +39,7 @@
 
 static unsigned int __init serial8250_early_in(struct uart_port *port, int offset)
 {
+	int reg_offset = offset;
 	offset <<= port->regshift;
 
 	switch (port->iotype) {
@@ -52,6 +53,8 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse
 		return ioread32be(port->membase + offset);
 	case UPIO_PORT:
 		return inb(port->iobase + offset);
+	case UPIO_AU:
+		return port->serial_in(port, reg_offset);
 	default:
 		return 0;
 	}
@@ -59,6 +62,7 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse
 
 static void __init serial8250_early_out(struct uart_port *port, int offset, int value)
 {
+	int reg_offset = offset;
 	offset <<= port->regshift;
 
 	switch (port->iotype) {
@@ -77,6 +81,9 @@ static void __init serial8250_early_out(struct uart_port *port, int offset, int
 	case UPIO_PORT:
 		outb(value, port->iobase + offset);
 		break;
+	case UPIO_AU:
+		port->serial_out(port, reg_offset, value);
+		break;
 	}
 }
 
@@ -172,3 +179,20 @@ OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup);
 OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup);
 
 #endif
+
+#ifdef CONFIG_SERIAL_8250_RT288X
+
+unsigned int au_serial_in(struct uart_port *p, int offset);
+void au_serial_out(struct uart_port *p, int offset, int value);
+
+static int __init early_au_setup(struct earlycon_device *dev, const char *opt)
+{
+	dev->port.serial_in = au_serial_in;
+	dev->port.serial_out = au_serial_out;
+	dev->port.iotype = UPIO_AU;
+	dev->con->write = early_serial8250_write;
+	return 0;
+}
+OF_EARLYCON_DECLARE(palmchip, "ralink,rt2880-uart", early_au_setup);
+
+#endif
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index b89c4ffc0486..1270ff163f63 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -483,5 +483,5 @@ static struct pci_driver exar_pci_driver = {
 module_pci_driver(exar_pci_driver);
 
 MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Exar Serial Dricer");
+MODULE_DESCRIPTION("Exar Serial Driver");
 MODULE_AUTHOR("Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>");
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index b67e7a544935..e500f7dd2470 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -61,6 +61,12 @@
  * The IRQ setting mode of F81866 is not the same with F81216 series.
  *	Level/Low: IRQ_MODE0:0, IRQ_MODE1:0
  *	Edge/High: IRQ_MODE0:1, IRQ_MODE1:0
+ *
+ * Clock speeds for UART (register F2h)
+ * 00: 1.8432MHz.
+ * 01: 18.432MHz.
+ * 10: 24MHz.
+ * 11: 14.769MHz.
  */
 #define F81866_IRQ_MODE		0xf0
 #define F81866_IRQ_SHARE	BIT(0)
@@ -72,6 +78,13 @@
 #define F81866_LDN_LOW		0x10
 #define F81866_LDN_HIGH		0x16
 
+#define F81866_UART_CLK 0xF2
+#define F81866_UART_CLK_MASK (BIT(1) | BIT(0))
+#define F81866_UART_CLK_1_8432MHZ 0
+#define F81866_UART_CLK_14_769MHZ (BIT(1) | BIT(0))
+#define F81866_UART_CLK_18_432MHZ BIT(0)
+#define F81866_UART_CLK_24MHZ BIT(1)
+
 struct fintek_8250 {
 	u16 pid;
 	u16 base_port;
@@ -256,8 +269,26 @@ static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata)
 	}
 }
 
-static int probe_setup_port(struct fintek_8250 *pdata, u16 io_address,
-			  unsigned int irq)
+static void fintek_8250_goto_highspeed(struct uart_8250_port *uart,
+			      struct fintek_8250 *pdata)
+{
+	sio_write_reg(pdata, LDN, pdata->index);
+
+	switch (pdata->pid) {
+	case CHIP_ID_F81866: /* set uart clock for high speed serial mode */
+		sio_write_mask_reg(pdata, F81866_UART_CLK,
+			F81866_UART_CLK_MASK,
+			F81866_UART_CLK_14_769MHZ);
+
+			uart->port.uartclk = 921600 * 16;
+		break;
+	default: /* leave clock speed untouched */
+		break;
+	}
+}
+
+static int probe_setup_port(struct fintek_8250 *pdata,
+					struct uart_8250_port *uart)
 {
 	static const u16 addr[] = {0x4e, 0x2e};
 	static const u8 keys[] = {0x77, 0xa0, 0x87, 0x67};
@@ -284,18 +315,20 @@ static int probe_setup_port(struct fintek_8250 *pdata, u16 io_address,
 				sio_write_reg(pdata, LDN, k);
 				aux = sio_read_reg(pdata, IO_ADDR1);
 				aux |= sio_read_reg(pdata, IO_ADDR2) << 8;
-				if (aux != io_address)
+				if (aux != uart->port.iobase)
 					continue;
 
 				pdata->index = k;
 
-				irq_data = irq_get_irq_data(irq);
+				irq_data = irq_get_irq_data(uart->port.irq);
 				if (irq_data)
 					level_mode =
 						irqd_is_level_type(irq_data);
 
 				fintek_8250_set_irq_mode(pdata, level_mode);
 				fintek_8250_set_max_fifo(pdata);
+				fintek_8250_goto_highspeed(uart, pdata);
+
 				fintek_8250_exit_key(addr[i]);
 
 				return 0;
@@ -330,7 +363,7 @@ int fintek_8250_probe(struct uart_8250_port *uart)
 	struct fintek_8250 *pdata;
 	struct fintek_8250 probe_data;
 
-	if (probe_setup_port(&probe_data, uart->port.iobase, uart->port.irq))
+	if (probe_setup_port(&probe_data, uart))
 		return -ENODEV;
 
 	pdata = devm_kzalloc(uart->port.dev, sizeof(*pdata), GFP_KERNEL);
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index f3ea90f0e411..7dddd7e6a01c 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -183,7 +183,6 @@ static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port)
 	if (ret)
 		return;
 
-	pci_set_master(pdev);
 	pci_try_set_mwi(pdev);
 
 	/* Special DMA address for UART */
@@ -216,6 +215,8 @@ static int qrk_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
 	struct pci_dev *pdev = to_pci_dev(port->dev);
 	int ret;
 
+	pci_set_master(pdev);
+
 	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 6119516ef5fc..09a65a3ec7f7 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -328,7 +328,7 @@ static const s8 au_io_out_map[8] = {
 	-1,	/* UART_SCR (unmapped) */
 };
 
-static unsigned int au_serial_in(struct uart_port *p, int offset)
+unsigned int au_serial_in(struct uart_port *p, int offset)
 {
 	if (offset >= ARRAY_SIZE(au_io_in_map))
 		return UINT_MAX;
@@ -338,7 +338,7 @@ static unsigned int au_serial_in(struct uart_port *p, int offset)
 	return __raw_readl(p->membase + (offset << p->regshift));
 }
 
-static void au_serial_out(struct uart_port *p, int offset, int value)
+void au_serial_out(struct uart_port *p, int offset, int value)
 {
 	if (offset >= ARRAY_SIZE(au_io_out_map))
 		return;
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 6117ac8da48f..5c8850f7a2a0 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -630,6 +630,15 @@ config SERIAL_UARTLITE_CONSOLE
 	  console (the system console is the device which receives all kernel
 	  messages and warnings and which allows logins in single user mode).
 
+config SERIAL_UARTLITE_NR_UARTS
+	int "Maximum number of uartlite serial ports"
+	depends on SERIAL_UARTLITE
+	range 1 256
+	default 1
+	help
+	  Set this to the number of uartlites in your system, or the number
+	  you think you might implement.
+
 config SERIAL_SUNCORE
 	bool
 	depends on SPARC
@@ -1343,6 +1352,7 @@ config SERIAL_ALTERA_JTAGUART_CONSOLE
 	bool "Altera JTAG UART console support"
 	depends on SERIAL_ALTERA_JTAGUART=y
 	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
 	help
 	  Enable a Altera JTAG UART port to be the system console.
 
@@ -1382,6 +1392,7 @@ config SERIAL_ALTERA_UART_CONSOLE
 	bool "Altera UART console support"
 	depends on SERIAL_ALTERA_UART=y
 	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
 	help
 	  Enable a Altera UART port to be the system console.
 
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 2d6288bc4554..53c03e005132 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -3,7 +3,6 @@
 #
 
 obj-$(CONFIG_SERIAL_CORE) += serial_core.o
-obj-$(CONFIG_SERIAL_21285) += 21285.o
 
 obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
 obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
@@ -17,6 +16,8 @@ obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
 obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
 obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
 
+obj-$(CONFIG_SERIAL_21285) += 21285.o
+
 # Now bring in any enabled 8250/16450/16550 type drivers.
 obj-$(CONFIG_SERIAL_8250) += 8250/
 
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index e409d7dac7ab..18e3f8342b85 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -383,6 +383,26 @@ console_initcall(altera_jtaguart_console_init);
 
 #define	ALTERA_JTAGUART_CONSOLE	(&altera_jtaguart_console)
 
+static void altera_jtaguart_earlycon_write(struct console *co, const char *s,
+					   unsigned int count)
+{
+	struct earlycon_device *dev = co->data;
+
+	uart_console_write(&dev->port, s, count, altera_jtaguart_console_putc);
+}
+
+static int __init altera_jtaguart_earlycon_setup(struct