diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-24 16:51:40 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-24 16:51:40 -0800 |
| commit | 90ddb3f03418cce0d83c415c0c1d470cf524ba46 (patch) | |
| tree | b61a296898b66941cb77819230fa4df2d975a5b5 | |
| parent | 8cbd92339db08b19b93d1637e5799ff2a8dddfd2 (diff) | |
| parent | 3eb5d0f26f4ea604e83ca499a72c0d33638f4765 (diff) | |
| download | linux-90ddb3f03418cce0d83c415c0c1d470cf524ba46.tar.gz linux-90ddb3f03418cce0d83c415c0c1d470cf524ba46.tar.bz2 linux-90ddb3f03418cce0d83c415c0c1d470cf524ba46.zip | |
Merge tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Rework portdrv shutdown so it disables interrupts but doesn't
disable bus mastering, which leads to hangs on Loongson LS7A
- Add mechanism to prevent Max_Read_Request_Size (MRRS) increases,
again to avoid hardware issues on Loongson LS7A (and likely other
devices based on DesignWare IP)
- Ignore devices with a firmware (DT or ACPI) node that says the
device is disabled
Resource management:
- Distribute spare resources to unconfigured hotplug bridges at
boot-time (not just when hot-adding such a bridge), which makes
hot-adding devices to docks work better. Tried this in v6.1 but had
to revert for regressions, so try again
- Fix root bus issue that dropped resources that happened to end
at 0, e.g., [bus 00]
PCI device hotplug:
- Remove device locking when marking device as disconnected so this
doesn't have to wait for concurrent driver bind/unbind to complete
- Quirk more Qualcomm bridges that don't fully implement the PCIe
Slot Status 'Command Completed' bit
Power management:
- Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we
don't miss hot-add notifications for USB4 docks, Thunderbolt, etc
Reset:
- Observe delay after reset, e.g., resuming from system sleep,
regardless of whether a bridge can suspend to D3cold at runtime
- Wait for secondary bus to become ready after a bridge reset
Virtualization:
- Avoid FLR on some AMD FCH AHCI adapters where it doesn't work
- Allow independent IOMMU groups for some Wangxun NICs that prevent
peer-to-peer transactions but don't advertise an ACS Capability
Error handling:
- Configure End-to-End-CRC (ECRC) only if Linux owns the AER
Capability
- Remove redundant Device Control Error Reporting Enable in the AER
service driver since this is already done for all devices during
enumeration
ASPM:
- Add pci_enable_link_state() interface to allow drivers to enable
ASPM link state
Endpoint framework:
- Move dra7xx and tegra194 linkup processing from hard IRQ to
threaded IRQ handler
- Add a separate lock for endpoint controller list of endpoint
function drivers to prevent deadlock in callbacks
- Pass events from endpoint controller to endpoint function drivers
via callbacks instead of notifiers
Synopsys DesignWare eDMA controller driver (acked by Vinod):
- Fix CPU vs PCI address issues
- Fix source vs destination address issues
- Fix issues with interleaved transfer semantics
- Fix channel count initialization issue (issue still exists in
several other drivers)
- Clean up and improve debugfs usage so it will work on platforms
with several eDMA devices
Baikal T-1 PCIe controller driver:
- Set a 64-bit DMA mask
Freescale i.MX6 PCIe controller driver:
- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver
support
Intel VMD host bridge driver:
- Add quirk to configure PCIe ASPM and LTR. This is normally done by
BIOS, and will be for future products
Marvell MVEBU PCIe controller driver:
- Mark this driver as broken in Kconfig since bugs prevent its daily
usage
MediaTek MT7621 PCIe controller driver:
- Delay PHY port initialization to improve boot reliability for ZBT
WE1326, ZBT WF3526-P, and some Netgear models
Qualcomm PCIe controller driver:
- Add MSM8998 DT compatible string
- Unify MSM8996 and MSM8998 clock orderings
- Add SM8350 DT binding and driver support
- Add IPQ8074 Gen3 DT binding and driver support
- Correct qcom,perst-regs in DT binding
- Add qcom_pcie_host_deinit() so the PHY is powered off and
regulators and clocks are disabled on late host-init errors
Socionext UniPhier Pro5 controller driver:
- Clean up uniphier-ep reg, clocks, resets, and their names in DT
binding
Synopsys DesignWare PCIe controller driver:
- Restrict coherent DMA mask to 32 bits for MSI, but allow controller
drivers to set 64-bit streaming DMA mask
- Add eDMA engine support in both Root Port and Endpoint controllers
Miscellaneous:
- Remove MODULE_LICENSE from boolean drivers so they don't look like
modules so modprobe can complain about them"
* tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits)
PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
PCI: bt1: Set 64-bit DMA mask
PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
dmaengine: dw-edma: Add mem-mapped LL-entries support
PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
PCI: hv: Drop duplicate PCI_MSI dependency
PCI/P2PDMA: Annotate RCU dereference
PCI/sysfs: Constify struct kobj_type pci_slot_ktype
PCI: hotplug: Allow marking devices as disconnected during bind/unbind
PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
PCI: qcom: Add IPQ8074 Gen3 port support
dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
dt-bindings: PCI: qcom: Sort compatibles alphabetically
PCI: qcom: Fix host-init error handling
PCI: qcom: Add SM8350 support
dt-bindings: PCI: qcom: Add SM8350
dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
...
66 files changed, 1570 insertions, 811 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 8faec13961cd..46268d6baa43 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -4303,7 +4303,9 @@ specified, e.g., 12@pci:8086:9c22:103c:198f for 4096-byte alignment. ecrc= Enable/disable PCIe ECRC (transaction layer - end-to-end CRC checking). + end-to-end CRC checking). Only effective if + OS has native AER control (either granted by + ACPI _OSC or forced via "pcie_ports=native") bios: Use BIOS/firmware settings. This is the the default. off: Turn ECRC off diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml index bad980902f66..f13f87fddb3d 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml @@ -24,6 +24,9 @@ properties: - fsl,imx8mq-pcie - fsl,imx8mm-pcie - fsl,imx8mp-pcie + - fsl,imx8mm-pcie-ep + - fsl,imx8mq-pcie-ep + - fsl,imx8mp-pcie-ep reg: items: diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml index 8d7eb51edcb4..89cfdee4b89f 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml @@ -47,8 +47,10 @@ properties: enable registers $ref: "/schemas/types.yaml#/definitions/phandle-array" items: - minItems: 3 - maxItems: 3 + - items: + - description: Syscon to TCSR system registers + - description: Perst enable offset + - description: Perst separation enable offset interrupts: items: diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml index a5859bb3dc28..fb32c43dd12d 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -16,25 +16,31 @@ description: | properties: compatible: - enum: - - qcom,pcie-ipq8064 - - qcom,pcie-ipq8064-v2 - - qcom,pcie-apq8064 - - qcom,pcie-apq8084 - - qcom,pcie-msm8996 - - qcom,pcie-ipq4019 - - qcom,pcie-ipq8074 - - qcom,pcie-qcs404 - - qcom,pcie-sa8540p - - qcom,pcie-sc7280 - - qcom,pcie-sc8180x - - qcom,pcie-sc8280xp - - qcom,pcie-sdm845 - - qcom,pcie-sm8150 - - qcom,pcie-sm8250 - - qcom,pcie-sm8450-pcie0 - - qcom,pcie-sm8450-pcie1 - - qcom,pcie-ipq6018 + oneOf: + - enum: + - qcom,pcie-apq8064 + - qcom,pcie-apq8084 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq6018 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064-v2 + - qcom,pcie-ipq8074 + - qcom,pcie-ipq8074-gen3 + - qcom,pcie-msm8996 + - qcom,pcie-qcs404 + - qcom,pcie-sa8540p + - qcom,pcie-sc7280 + - qcom,pcie-sc8180x + - qcom,pcie-sc8280xp + - qcom,pcie-sdm845 + - qcom,pcie-sm8150 + - qcom,pcie-sm8250 + - qcom,pcie-sm8350 + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + - items: + - const: qcom,pcie-msm8998 + - const: qcom,pcie-msm8996 reg: minItems: 4 @@ -153,6 +159,7 @@ allOf: contains: enum: - qcom,pcie-ipq6018 + - qcom,pcie-ipq8074-gen3 then: properties: reg: @@ -195,6 +202,7 @@ allOf: - qcom,pcie-sc8180x - qcom,pcie-sc8280xp - qcom,pcie-sm8250 + - qcom,pcie-sm8350 - qcom,pcie-sm8450-pcie0 - qcom,pcie-sm8450-pcie1 then: @@ -312,27 +320,17 @@ allOf: enum: - qcom,pcie-msm8996 then: - oneOf: - - properties: - clock-names: - items: - - const: pipe # Pipe Clock driving internal logic - - const: aux # Auxiliary (AUX) clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - properties: - clock-names: - items: - - const: pipe # Pipe Clock driving internal logic - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: cfg # Configuration clock - - const: aux # Auxiliary (AUX) clock properties: clocks: minItems: 5 maxItems: 5 + clock-names: + items: + - const: pipe # Pipe Clock driving internal logic + - const: aux # Auxiliary (AUX) clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock resets: false reset-names: false @@ -373,6 +371,7 @@ allOf: contains: enum: - qcom,pcie-ipq6018 + - qcom,pcie-ipq8074-gen3 then: properties: clocks: @@ -555,6 +554,35 @@ allOf: compatible: contains: enum: + - qcom,pcie-sm8350 + then: + properties: + clocks: + minItems: 8 + maxItems: 9 + clock-names: + minItems: 8 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + - const: aggre0 # Aggre NoC PCIe0 AXI clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: - qcom,pcie-sm8450-pcie0 then: properties: @@ -664,6 +692,7 @@ allOf: - qcom,pcie-ipq8064 - qcom,pcie-ipq8064v2 - qcom,pcie-ipq8074 + - qcom,pcie-ipq8074-gen3 - qcom,pcie-qcs404 then: required: @@ -692,6 +721,7 @@ allOf: - qcom,pcie-sdm845 - qcom,pcie-sm8150 - qcom,pcie-sm8250 + - qcom,pcie-sm8350 - qcom,pcie-sm8450-pcie0 - qcom,pcie-sm8450-pcie1 then: @@ -746,6 +776,7 @@ allOf: - qcom,pcie-ipq8064 - qcom,pcie-ipq8064-v2 - qcom,pcie-ipq8074 + - qcom,pcie-ipq8074-gen3 - qcom,pcie-qcs404 - qcom,pcie-sa8540p then: diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml index 437e61618d06..f0d8e486a07d 100644 --- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml @@ -15,9 +15,6 @@ description: | maintainers: - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> -allOf: - - $ref: /schemas/pci/snps,dw-pcie-ep.yaml# - properties: compatible: enum: @@ -29,40 +26,25 @@ properties: maxItems: 5 reg-names: - oneOf: - - items: - - const: dbi - - const: dbi2 - - const: link - - const: addr_space - - items: - - const: dbi - - const: dbi2 - - const: link - - const: addr_space - - const: atu + minItems: 4 + items: + - const: dbi + - const: dbi2 + - const: link + - const: addr_space + - const: atu clocks: minItems: 1 maxItems: 2 - clock-names: - oneOf: - - items: # for Pro5 - - const: gio - - const: link - - const: link # for NX1 + clock-names: true resets: minItems: 1 maxItems: 2 - reset-names: - oneOf: - - items: # for Pro5 - - const: gio - - const: link - - const: link # for NX1 + reset-names: true num-ib-windows: const: 16 @@ -78,6 +60,46 @@ properties: phy-names: const: pcie-phy +allOf: + - $ref: /schemas/pci/snps,dw-pcie-ep.yaml# + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pro5-pcie-ep + then: + properties: + reg: + maxItems: 4 + reg-names: + maxItems: 4 + clocks: + minItems: 2 + clock-names: + items: + - const: gio + - const: link + resets: + minItems: 2 + reset-names: + items: + - const: gio + - const: link + else: + properties: + reg: + minItems: 5 + reg-names: + minItems: 5 + clocks: + maxItems: 1 + clock-names: + const: link + resets: + maxItems: 1 + reset-names: + const: link + required: - compatible - reg diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 97450f4003cc..f007116a8427 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -484,6 +484,25 @@ void acpi_dev_power_up_children_with_adr(struct acpi_device *adev) acpi_dev_for_each_child(adev, acpi_power_up_if_adr_present, NULL); } +/** + * acpi_dev_power_state_for_wake - Deepest power state for wakeup signaling + * @adev: ACPI companion of the target device. + * + * Evaluate _S0W for @adev and return the value produced by it or return + * ACPI_STATE_UNKNOWN on errors (including _S0W not present). + */ +u8 acpi_dev_power_state_for_wake(struct acpi_device *adev) +{ + unsigned long long state; + acpi_status status; + + status = acpi_evaluate_integer(adev->handle, "_S0W", NULL, &state); + if (ACPI_FAILURE(status)) + return ACPI_STATE_UNKNOWN; + + return state; +} + #ifdef CONFIG_PM static DEFINE_MUTEX(acpi_pm_notifier_lock); static DEFINE_MUTEX(acpi_pm_notifier_install_lock); diff --git a/drivers/dma/dw-edma/Kconfig b/drivers/dma/dw-edma/Kconfig index 7ff17b2db6a1..2b6f2679508d 100644 --- a/drivers/dma/dw-edma/Kconfig +++ b/drivers/dma/dw-edma/Kconfig @@ -9,11 +9,14 @@ config DW_EDMA Support the Synopsys DesignWare eDMA controller, normally implemented on endpoints SoCs. +if DW_EDMA + config DW_EDMA_PCIE tristate "Synopsys DesignWare eDMA PCIe driver" depends on PCI && PCI_MSI - select DW_EDMA help Provides a glue-logic between the Synopsys DesignWare eDMA controller and an endpoint PCIe device. This also serves as a reference design to whom desires to use this IP. + +endif # DW_EDMA diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c index c54b24ff5206..1906a836f0aa 100644 --- a/drivers/dma/dw-edma/dw-edma-core.c +++ b/drivers/dma/dw-edma/dw-edma-core.c @@ -39,6 +39,17 @@ struct dw_edma_desc *vd2dw_edma_desc(struct virt_dma_desc *vd) return container_of(vd, struct dw_edma_desc, vd); } +static inline +u64 dw_edma_get_pci_address(struct dw_edma_chan *chan, phys_addr_t cpu_addr) +{ + struct dw_edma_chip *chip = chan->dw->chip; + + if (chip->ops->pci_address) + return chip->ops->pci_address(chip->dev, cpu_addr); + + return cpu_addr; +} + static struct dw_edma_burst *dw_edma_alloc_burst(struct dw_edma_chunk *chunk) { struct dw_edma_burst *burst; @@ -197,6 +208,24 @@ static void dw_edma_start_transfer(struct dw_edma_chan *chan) desc->chunks_alloc--; } +static void dw_edma_device_caps(struct dma_chan *dchan, + struct dma_slave_caps *caps) +{ + struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan); + + if (chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL) { + if (chan->dir == EDMA_DIR_READ) + caps->directions = BIT(DMA_DEV_TO_MEM); + else + caps->directions = BIT(DMA_MEM_TO_DEV); + } else { + if (chan->dir == EDMA_DIR_WRITE) + caps->directions = BIT(DMA_DEV_TO_MEM); + else + caps->directions = BIT(DMA_MEM_TO_DEV); + } +} + static int dw_edma_device_config(struct dma_chan *dchan, struct dma_slave_config *config) { @@ -327,11 +356,12 @@ dw_edma_device_transfer(struct dw_edma_transfer *xfer) { struct dw_edma_chan *chan = dchan2dw_edma_chan(xfer->dchan); enum dma_transfer_direction dir = xfer->direction; - phys_addr_t src_addr, dst_addr; struct scatterlist *sg = NULL; struct dw_edma_chunk *chunk; struct dw_edma_burst *burst; struct dw_edma_desc *desc; + u64 src_addr, dst_addr; + size_t fsz = 0; u32 cnt = 0; int i;< |