Merge tag 'i2c-host-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

The i801 and designware drivers received most of the changes,
including refactorings and some additions.

Recovery changes for the iMX and iMX-LPI2C are now utilizing the
generic i2c support.

The Cadence driver now supports system suspend and resume.

The hisi, mpc, sh_mobile, and npcm drivers have undergone some
cleanups and improvements. Meanwhile, Uwe continues his work on
converting the "remove" callback to become a void function.

The pca954x mux driver now supports additional configurations,
such as isolating faulty channels and flushing stuck buses, among
others.

Support has been added for Renesas r8a779h0, i.MX95 LPI2C, and
Microchip sam9x7. Meanwhile, Geert lays the groundwork for the
upcoming R-Car Gen4.

21 files changed, 501 insertions, 446 deletions

diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
index 6adedd3ec399..b1c13bab2472 100644
--- a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -25,7 +25,9 @@ properties:
               - atmel,sama5d2-i2c
               - microchip,sam9x60-i2c
       - items:
-          - const: microchip,sama7g5-i2c
+          - enum:
+              - microchip,sama7g5-i2c
+              - microchip,sam9x7-i2c
           - const: microchip,sam9x60-i2c
 
   reg:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
index 4656f5112b84..54d500be6aaa 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
@@ -24,6 +24,7 @@ properties:
               - fsl,imx8qm-lpi2c
               - fsl,imx8ulp-lpi2c
               - fsl,imx93-lpi2c
+              - fsl,imx95-lpi2c
           - const: fsl,imx7ulp-lpi2c
 
   reg:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
index 70fb69b923c4..b1d7d14c0be4 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
@@ -96,6 +96,6 @@ examples:
         interrupts = <43 2>;
         interrupt-parent = <&mpic>;
         clock-frequency = <400000>;
-        i2c-scl-clk-low-timeout-us = <10000>;
+        i2c-transfer-timeout-us = <10000>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
index 2d7bb998b0e9..9aa0585200c9 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
@@ -71,6 +71,23 @@ properties:
     description: A voltage regulator supplying power to the chip. On PCA9846
       the regulator supplies power to VDD2 (core logic) and optionally to VDD1.
 
+  maxim,isolate-stuck-channel:
+    type: boolean
+    description: Allows to use non faulty channels while a stuck channel is
+      isolated from the upstream bus. If not set all channels are isolated from
+      the upstream bus until the fault is cleared.
+
+  maxim,send-flush-out-sequence:
+    type: boolean
+    description: Send a flush-out sequence to stuck auxiliary buses
+      automatically after a stuck channel is being detected.
+
+  maxim,preconnection-wiggle-test-enable:
+    type: boolean
+    description: Send a STOP condition to the auxiliary buses when the switch
+      register activates a channel to detect a stuck high fault. On fault the
+      channel is isolated from the upstream bus.
+
 required:
   - compatible
   - reg
@@ -95,6 +112,19 @@ allOf:
         "#interrupt-cells": false
         interrupt-controller: false
 
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - maxim,max7357
+    then:
+      properties:
+        maxim,isolate-stuck-channel: false
+        maxim,send-flush-out-sequence: false
+        maxim,preconnection-wiggle-test-enable: false
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
index c4ace5585e1e..51b220da461b 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
@@ -53,6 +53,7 @@ properties:
               - renesas,i2c-r8a779a0     # R-Car V3U
               - renesas,i2c-r8a779f0     # R-Car S4-8
               - renesas,i2c-r8a779g0     # R-Car V4H
+              - renesas,i2c-r8a779h0     # R-Car V4M
           - const: renesas,rcar-gen4-i2c # R-Car Gen4
 
   reg:
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 28eb48dd5b32..97989c914260 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1235,7 +1235,7 @@ config I2C_RCAR
 	depends on ARCH_RENESAS || COMPILE_TEST
 	select I2C_SLAVE
 	select I2C_SMBUS
-	select RESET_CONTROLLER if ARCH_RCAR_GEN3
+	select RESET_CONTROLLER if ARCH_RCAR_GEN3 || ARCH_RCAR_GEN4
 	help
 	  If you say yes to this option, support will be included for the
 	  R-Car I2C controller.
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index de3f58b60dce..4bb7d6756947 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -1176,6 +1176,18 @@ static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev)
 	return 0;
 }
 
+static int __maybe_unused cdns_i2c_suspend(struct device *dev)
+{
+	struct cdns_i2c *xi2c = dev_get_drvdata(dev);
+
+	i2c_mark_adapter_suspended(&xi2c->adap);
+
+	if (!pm_runtime_status_suspended(dev))
+		return cdns_i2c_runtime_suspend(dev);
+
+	return 0;
+}
+
 /**
  * cdns_i2c_init -  Controller initialisation
  * @id:		Device private data structure
@@ -1219,7 +1231,28 @@ static int __maybe_unused cdns_i2c_runtime_resume(struct device *dev)
 	return 0;
 }
 
+static int __maybe_unused cdns_i2c_resume(struct device *dev)
+{
+	struct cdns_i2c *xi2c = dev_get_drvdata(dev);
+	int err;
+
+	err = cdns_i2c_runtime_resume(dev);
+	if (err)
+		return err;
+
+	if (pm_runtime_status_suspended(dev)) {
+		err = cdns_i2c_runtime_suspend(dev);
+		if (err)
+			return err;
+	}
+
+	i2c_mark_adapter_resumed(&xi2c->adap);
+
+	return 0;
+}
+
 static const struct dev_pm_ops cdns_i2c_dev_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(cdns_i2c_suspend, cdns_i2c_resume)
 	SET_RUNTIME_PM_OPS(cdns_i2c_runtime_suspend,
 			   cdns_i2c_runtime_resume, NULL)
 };
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 35f762872b8a..e8a688d04aee 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -648,7 +648,7 @@ void i2c_dw_disable(struct dw_i2c_dev *dev)
 	__i2c_dw_disable(dev);
 
 	/* Disable all interrupts */
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
+	__i2c_dw_write_intr_mask(dev, 0);
 	regmap_read(dev->map, DW_IC_CLR_INTR, &dummy);
 
 	i2c_dw_release_lock(dev);
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index a7f6f3eafad7..e9606c00b8d1 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -212,6 +212,7 @@ struct reset_control;
  * @msg_err: error status of the current transfer
  * @status: i2c master status, one of STATUS_*
  * @abort_source: copy of the TX_ABRT_SOURCE register
+ * @sw_mask: SW mask of DW_IC_INTR_MASK used in polling mode
  * @irq: interrupt number for the i2c master
  * @flags: platform specific flags like type of IO accessors or model
  * @adapter: i2c subsystem adapter node
@@ -270,6 +271,7 @@ struct dw_i2c_dev {
 	int			msg_err;
 	unsigned int		status;
 	unsigned int		abort_source;
+	unsigned int		sw_mask;
 	int			irq;
 	u32			flags;
 	struct i2c_adapter	adapter;
@@ -303,6 +305,7 @@ struct dw_i2c_dev {
 #define ACCESS_INTR_MASK			BIT(0)
 #define ACCESS_NO_IRQ_SUSPEND			BIT(1)
 #define ARBITRATION_SEMAPHORE			BIT(2)
+#define ACCESS_POLLING				BIT(3)
 
 #define MODEL_MSCC_OCELOT			BIT(8)
 #define MODEL_BAIKAL_BT1			BIT(9)
@@ -318,7 +321,7 @@ struct dw_i2c_dev {
 #define AMD_UCSI_INTR_EN			0xd
 
 #define TXGBE_TX_FIFO_DEPTH			4
-#define TXGBE_RX_FIFO_DEPTH			0
+#define TXGBE_RX_FIFO_DEPTH			1
 
 struct i2c_dw_semaphore_callbacks {
 	int	(*probe)(struct dw_i2c_dev *dev);
@@ -351,6 +354,24 @@ static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
 	dev->status &= ~STATUS_ACTIVE;
 }
 
+static inline void __i2c_dw_write_intr_mask(struct dw_i2c_dev *dev,
+					    unsigned int intr_mask)
+{
+	unsigned int val = dev->flags & ACCESS_POLLING ? 0 : intr_mask;
+
+	regmap_write(dev->map, DW_IC_INTR_MASK, val);
+	dev->sw_mask = intr_mask;
+}
+
+static inline void __i2c_dw_read_intr_mask(struct dw_i2c_dev *dev,
+					   unsigned int *intr_mask)
+{
+	if (!(dev->flags & ACCESS_POLLING))
+		regmap_read(dev->map, DW_IC_INTR_MASK, intr_mask);
+	else
+		*intr_mask = dev->sw_mask;
+}
+
 void __i2c_dw_disable(struct dw_i2c_dev *dev);
 
 extern void i2c_dw_configure_master(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 85dbd0eb5392..c7e56002809a 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -240,7 +240,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 		     msgs[dev->msg_write_idx].addr | ic_tar);
 
 	/* Enforce disabled interrupts (due to HW issues) */
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
+	__i2c_dw_write_intr_mask(dev, 0);
 
 	/* Enable the adapter */
 	__i2c_dw_enable(dev);
@@ -250,7 +250,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 
 	/* Clear and enable interrupts */
 	regmap_read(dev->map, DW_IC_CLR_INTR, &dummy);
-	regmap_write(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_MASTER_MASK);
+	__i2c_dw_write_intr_mask(dev, DW_IC_INTR_MASTER_MASK);
 }
 
 static int i2c_dw_check_stopbit(struct dw_i2c_dev *dev)
@@ -300,7 +300,6 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	dev->msgs = msgs;
 	dev->msgs_num = num_msgs;
 	i2c_dw_xfer_init(dev);
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
 
 	/* Initiate messages read/write transaction */
 	for (msg_wrt_idx = 0; msg_wrt_idx < num_msgs; msg_wrt_idx++) {
@@ -355,68 +354,6 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	return 0;
 }
 
-static int i2c_dw_poll_tx_empty(struct dw_i2c_dev *dev)
-{
-	u32 val;
-
-	return regmap_read_poll_timeout(dev->map, DW_IC_RAW_INTR_STAT, val,
-					val & DW_IC_INTR_TX_EMPTY,
-					100, 1000);
-}
-
-static int i2c_dw_poll_rx_full(struct dw_i2c_dev *dev)
-{
-	u32 val;
-
-	return regmap_read_poll_timeout(dev->map, DW_IC_RAW_INTR_STAT, val,
-					val & DW_IC_INTR_RX_FULL,
-					100, 1000);
-}
-
-static int txgbe_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,
-				   int num_msgs)
-{
-	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
-	int msg_idx, buf_len, data_idx, ret;
-	unsigned int val, stop = 0;
-	u8 *buf;
-
-	dev->msgs = msgs;
-	dev->msgs_num = num_msgs;
-	i2c_dw_xfer_init(dev);
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-
-	for (msg_idx = 0; msg_idx < num_msgs; msg_idx++) {
-		buf = msgs[msg_idx].buf;
-		buf_len = msgs[msg_idx].len;
-
-		for (data_idx = 0; data_idx < buf_len; data_idx++) {
-			if (msg_idx == num_msgs - 1 && data_idx == buf_len - 1)
-				stop |= BIT(9);
-
-			if (msgs[msg_idx].flags & I2C_M_RD) {
-				regmap_write(dev->map, DW_IC_DATA_CMD, 0x100 | stop);
-
-				ret = i2c_dw_poll_rx_full(dev);
-				if (ret)
-					return ret;
-
-				regmap_read(dev->map, DW_IC_DATA_CMD, &val);
-				buf[data_idx] = val;
-			} else {
-				ret = i2c_dw_poll_tx_empty(dev);
-				if (ret)
-					return ret;
-
-				regmap_write(dev->map, DW_IC_DATA_CMD,
-					     buf[data_idx] | stop);
-			}
-		}
-	}
-
-	return num_msgs;
-}
-
 /*
  * Initiate (and continue) low level master read/write transaction.
  * This function is only called from i2c_dw_isr, and pumping i2c_msg
@@ -546,7 +483,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 	if (dev->msg_err)
 		intr_mask = 0;
 
-	regmap_write(dev->map,  DW_IC_INTR_MASK, intr_mask);
+	__i2c_dw_write_intr_mask(dev, intr_mask);
 }
 
 static u8
@@ -554,6 +491,7 @@ i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len)
 {
 	struct i2c_msg *msgs = dev->msgs;
 	u32 flags = msgs[dev->msg_read_idx].flags;
+	unsigned int intr_mask;
 
 	/*
 	 * Adjust the buffer length and mask the flag
@@ -568,8 +506,9 @@ i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len)
 	 * Received buffer length, re-enable TX_EMPTY interrupt
 	 * to resume the SMBUS transaction.
 	 */
-	regmap_update_bits(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_TX_EMPTY,
-			   DW_IC_INTR_TX_EMPTY);
+	__i2c_dw_read_intr_mask(dev, &intr_mask);
+	intr_mask |= DW_IC_INTR_TX_EMPTY;
+	__i2c_dw_write_intr_mask(dev, intr_mask);
 
 	return len;
 }
@@ -633,6 +572,169 @@ i2c_dw_read(struct dw_i2c_dev *dev)
 	}
 }
 
+static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
+{
+	unsigned int stat, dummy;
+
+	/*
+	 * The IC_INTR_STAT register just indicates "enabled" interrupts.
+	 * The unmasked raw version of interrupt status bits is available
+	 * in the IC_RAW_INTR_STAT register.
+	 *
+	 * That is,
+	 *   stat = readl(IC_INTR_STAT);
+	 * equals to,
+	 *   stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK);
+	 *
+	 * The raw version might be useful for debugging purposes.
+	 */
+	if (!(dev->flags & ACCESS_POLLING)) {
+		regmap_read(dev->map, DW_IC_INTR_STAT, &stat);
+	} else {
+		regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
+		stat &= dev->sw_mask;
+	}
+
+	/*
+	 * Do not use the IC_CLR_INTR register to clear interrupts, or
+	 * you'll miss some interrupts, triggered during the period from
+	 * readl(IC_INTR_STAT) to readl(IC_CLR_INTR).
+	 *
+	 * Instead, use the separately-prepared IC_CLR_* registers.
+	 */
+	if (stat & DW_IC_INTR_RX_UNDER)
+		regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &dummy);
+	if (stat & DW_IC_INTR_RX_OVER)
+		regmap_read(dev->map, DW_IC_CLR_RX_OVER, &dummy);
+	if (stat & DW_IC_INTR_TX_OVER)
+		regmap_read(dev->map, DW_IC_CLR_TX_OVER, &dummy);
+	if (stat & DW_IC_INTR_RD_REQ)
+		regmap_read(dev->map, DW_IC_CLR_RD_REQ, &dummy);
+	if (stat & DW_IC_INTR_TX_ABRT) {
+		/*
+		 * The IC_TX_ABRT_SOURCE register is cleared whenever
+		 * the IC_CLR_TX_ABRT is read.  Preserve it beforehand.
+		 */
+		regmap_read(dev->map, DW_IC_TX_ABRT_SOURCE, &dev->abort_source);
+		regmap_read(dev->map, DW_IC_CLR_TX_ABRT, &dummy);
+	}
+	if (stat & DW_IC_INTR_RX_DONE)
+		regmap_read(dev->map, DW_IC_CLR_RX_DONE, &dummy);
+	if (stat & DW_IC_INTR_ACTIVITY)
+		regmap_read(dev->map, DW_IC_CLR_ACTIVITY, &dummy);
+	if ((stat & DW_IC_INTR_STOP_DET) &&
+	    ((dev->rx_outstanding == 0) || (stat & DW_IC_INTR_RX_FULL)))
+		regmap_read(dev->map, DW_IC_CLR_STOP_DET, &dummy);
+	if (stat & DW_IC_INTR_START_DET)
+		regmap_read(dev->map, DW_IC_CLR_START_DET, &dummy);
+	if (stat & DW_IC_INTR_GEN_CALL)
+		regmap_read(dev->map, DW_IC_CLR_GEN_CALL, &dummy);
+
+	return stat;
+}
+
+static void i2c_dw_process_transfer(struct dw_i2c_dev *dev, unsigned int stat)
+{
+	if (stat & DW_IC_INTR_TX_ABRT) {
+		dev->cmd_err |= DW_IC_ERR_TX_ABRT;
+		dev->status &= ~STATUS_MASK;
+		dev->rx_outstanding = 0;
+
+		/*
+		 * Anytime TX_ABRT is set, the contents of the tx/rx
+		 * buffers are flushed. Make sure to skip them.
+		 */
+		__i2c_dw_write_intr_mask(dev, 0);
+		goto tx_aborted;
+	}
+
+	if (stat & DW_IC_INTR_RX_FULL)
+		i2c_dw_read(dev);
+
+	if (stat & DW_IC_INTR_TX_EMPTY)
+		i2c_dw_xfer_msg(dev);
+
+	/*
+	 * No need to modify or disable the interrupt mask here.
+	 * i2c_dw_xfer_msg() will take care of it according to
+	 * the current transmit status.
+	 */
+
+tx_aborted:
+	if (((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err) &&
+	     (dev->rx_outstanding == 0))
+		complete(&dev->cmd_complete);
+	else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
+		/* Workaround to trigger pending interrupt */
+		__i2c_dw_read_intr_mask(dev, &stat);
+		__i2c_dw_write_intr_mask(dev, 0);
+		__i2c_dw_write_intr_mask(dev, stat);
+	}
+}
+
+/*
+ * Interrupt service routine. This gets called whenever an I2C master interrupt
+ * occurs.
+ */
+static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
+{
+	struct dw_i2c_dev *dev = dev_id;
+	unsigned int stat, enabled;
+
+	regmap_read(dev->map, DW_IC_ENABLE, &enabled);
+	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
+	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
+		return IRQ_NONE;
+	if (pm_runtime_suspended(dev->dev) || stat == GENMASK(31, 0))
+		return IRQ_NONE;
+	dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
+
+	stat = i2c_dw_read_clear_intrbits(dev);
+
+	if (!(dev->status & STATUS_ACTIVE)) {
+		/*
+		 * Unexpected interrupt in driver point of view. State
+		 * variables are either unset or stale so acknowledge and
+		 * disable interrupts for suppressing further interrupts if
+		 * interrupt really came from this HW (E.g. firmware has left
+		 * the HW active).
+		 */
+		__i2c_dw_write_intr_mask(dev, 0);
+		return IRQ_HANDLED;
+	}
+
+	i2c_dw_process_transfer(dev, stat);
+
+	return IRQ_HANDLED;
+}
+
+static int i2c_dw_wait_transfer(struct dw_i2c_dev *dev)
+{
+	unsigned long timeout = dev->adapter.timeout;
+	unsigned int stat;
+	int ret;
+
+	if (!(dev->flags & ACCESS_POLLING)) {
+		ret = wait_for_completion_timeout(&dev->cmd_complete, timeout);
+	} else {
+		timeout += jiffies;
+		do {
+			ret = try_wait_for_completion(&dev->cmd_complete);
+			if (ret)
+				break;
+
+			stat = i2c_dw_read_clear_intrbits(dev);
+			if (stat)
+				i2c_dw_process_transfer(dev, stat);
+			else
+				/* Try save some power */
+				usleep_range(3, 25);
+		} while (time_before(jiffies, timeout));
+	}
+
+	return ret ? 0 : -ETIMEDOUT;
+}
+
 /*
  * Prepare controller for a transaction and call i2c_dw_xfer_msg.
  */
@@ -646,18 +748,10 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 
 	pm_runtime_get_sync(dev->dev);
 
-	/*
-	 * Initiate I2C message transfer when polling mode is enabled,
-	 * As it is polling based transfer mechanism, which does not support
-	 * interrupt based functionalities of existing DesignWare driver.
-	 */
 	switch (dev->flags & MODEL_MASK) {
 	case MODEL_AMD_NAVI_GPU:
 		ret = amd_i2c_dw_xfer_quirk(adap, msgs, num);
 		goto done_nolock;
-	case MODEL_WANGXUN_SP:
-		ret = txgbe_i2c_dw_xfer_quirk(adap, msgs, num);
-		goto done_nolock;
 	default:
 		break;
 	}
@@ -685,12 +779,12 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	i2c_dw_xfer_init(dev);
 
 	/* Wait for tx to complete */
-	if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
+	ret = i2c_dw_wait_transfer(dev);
+	if (ret) {
 		dev_err(dev->dev, "controller timed out\n");
-		/* i2c_dw_init implicitly disables the adapter */
+		/* i2c_dw_init_master() implicitly disables the adapter */
 		i2c_recover_bus(&dev->adapter);
 		i2c_dw_init_master(dev);
-		ret = -ETIMEDOUT;
 		goto done;
 	}
 
@@ -698,7 +792,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	 * We must disable the adapter before returning and signaling the end
 	 * of the current transfer. Otherwise the hardware might continue
 	 * generating interrupts which in turn causes a race condition with
-	 * the following transfer.  Needs some more investigation if the
+	 * the following transfer. Needs some more investigation if the
 	 * additional interrupts are a hardware bug or this driver doesn't
 	 * handle them correctly yet.
 	 */
@@ -746,132 +840,6 @@ static const struct i2c_adapter_quirks i2c_dw_quirks = {
 	.flags = I2C_AQ_NO_ZERO_LEN,
 };
 
-static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
-{
-	unsigned int stat, dummy;
-
-	/*
-	 * The IC_INTR_STAT register just indicates "enabled" interrupts.
-	 * The unmasked raw version of interrupt status bits is available
-	 * in the IC_RAW_INTR_STAT register.
-	 *
-	 * That is,
-	 *   stat = readl(IC_INTR_STAT);
-	 * equals to,
-	 *   stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK);
-	 *
-	 * The raw version might be useful for debugging purposes.
-	 */
-	regmap_read(dev->map, DW_IC_INTR_STAT, &stat);
-
-	/*
-	 * Do not use the IC_CLR_INTR register to clear interrupts, or
-	 * you'll miss some interrupts, triggered during the period from
-	 * readl(IC_INTR_STAT) to readl(IC_CLR_INTR).
-	 *
-	 * Instead, use the separately-prepared IC_CLR_* registers.
-	 */
-	if (stat & DW_IC_INTR_RX_UNDER)
-		regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &dummy);
-	if (stat & DW_IC_INTR_RX_OVER)
-		regmap_read(dev->map, DW_IC_CLR_RX_OVER, &dummy);
-	if (stat & DW_IC_INTR_TX_OVER)
-		regmap_read(dev->map, DW_IC_CLR_TX_OVER, &dummy);
-	if (stat & DW_IC_INTR_RD_REQ)
-		regmap_read(dev->map, DW_IC_CLR_RD_REQ, &dummy);
-	if (stat & DW_IC_INTR_TX_ABRT) {
-		/*
-		 * The IC_TX_ABRT_SOURCE register is cleared whenever
-		 * the IC_CLR_TX_ABRT is read.  Preserve it beforehand.
-		 */
-		regmap_read(dev->map, DW_IC_TX_ABRT_SOURCE, &dev->abort_source);
-		regmap_read(dev->map, DW_IC_CLR_TX_ABRT, &dummy);
-	}
-	if (stat & DW_IC_INTR_RX_DONE)
-		regmap_read(dev->map, DW_IC_CLR_RX_DONE, &dummy);
-	if (stat & DW_IC_INTR_ACTIVITY)
-		regmap_read(dev->map, DW_IC_CLR_ACTIVITY, &dummy);
-	if ((stat & DW_IC_INTR_STOP_DET) &&
-	    ((dev->rx_outstanding == 0) || (stat & DW_IC_INTR_RX_FULL)))
-		regmap_read(dev->map, DW_IC_CLR_STOP_DET, &dummy);
-	if (stat & DW_IC_INTR_START_DET)
-		regmap_read(dev->map, DW_IC_CLR_START_DET, &dummy);
-	if (stat & DW_IC_INTR_GEN_CALL)
-		regmap_read(dev->map, DW_IC_CLR_GEN_CALL, &dummy);
-
-	return stat;
-}
-
-/*
- * Interrupt service routine. This gets called whenever an I2C master interrupt
- * occurs.
- */
-static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
-{
-	struct dw_i2c_dev *dev = dev_id;
-	unsigned int stat, enabled;
-
-	regmap_read(dev->map, DW_IC_ENABLE, &enabled);
-	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
-	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
-		return IRQ_NONE;
-	if (pm_runtime_suspended(dev->dev) || stat == GENMASK(31, 0))
-		return IRQ_NONE;
-	dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
-
-	stat = i2c_dw_read_clear_intrbits(dev);
-
-	if (!(dev->status & STATUS_ACTIVE)) {
-		/*
-		 * Unexpected interrupt in driver point of view. State
-		 * variables are either unset or stale so acknowledge and
-		 * disable interrupts for suppressing further interrupts if
-		 * interrupt really came from this HW (E.g. firmware has left
-		 * the HW active).
-		 */
-		regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-		return IRQ_HANDLED;
-	}
-
-	if (stat & DW_IC_INTR_TX_ABRT) {
-		dev->cmd_err |= DW_IC_ERR_TX_ABRT;
-		dev->status &= ~STATUS_MASK;
-		dev->rx_outstanding = 0;
-
-		/*
-		 * Anytime TX_ABRT is set, the contents of the tx/rx
-		 * buffers are flushed. Make sure to skip them.
-		 */
-		regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-		goto tx_aborted;
-	}
-
-	if (stat & DW_IC_INTR_RX_FULL)
-		i2c_dw_read(dev);
-
-	if (stat & DW_IC_INTR_TX_EMPTY)
-		i2c_dw_xfer_msg(dev);
-
-	/*
-	 * No need to modify or disable the interrupt mask here.
-	 * i2c_dw_xfer_msg() will take care of it according to
-	 * the current transmit status.
-	 */
-
-tx_aborted:
-	if (((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err) &&
-	     (dev->rx_outstanding == 0))
-		complete(&dev->cmd_complete);
-	else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
-		/* Workaround to trigger pending interrupt */
-		regmap_read(dev->map, DW_IC_INTR_MASK, &stat);
-		regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-		regmap_write(dev->map, DW_IC_INTR_MASK, stat);
-	}
-
-	return IRQ_HANDLED;
-}
-
 void i2c_dw_configure_master(struct dw_i2c_dev *dev)
 {
 	struct i2c_timings *t = &dev->timings;
@@ -953,31 +921,6 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
 	return 0;
 }
 
-static int i2c_dw_poll_adap_quirk(struct dw_i2c_dev *dev)
-{
-	struct i2c_adapter *adap = &dev->adapter;
-	int ret;
-
-	pm_runtime_get_noresume(dev->dev);
-	ret = i2c_add_numbered_adapter(adap);
-	if (ret)
-		dev_err(dev->dev, "Failed to add adapter: %d\n", ret);
-	pm_runtime_put_noidle(dev->dev);
-
-	return ret;
-}
-
-static bool i2c_dw_is_model_poll(struct dw_i2c_dev *dev)
-{
-	switch (dev->flags & MODEL_MASK) {
-	case MODEL_AMD_NAVI_GPU:
-	case MODEL_WANGXUN_SP:
-		return true;
-	default:
-		return false;
-	}
-}
-
 int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 {
 	struct i2c_adapter *adap = &dev->adapter;
@@ -1033,9 +976,6 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 	adap->dev.parent = dev->dev;
 	i2c_set_adapdata(adap, dev);
 
-	if (i2c_dw_is_model_poll(dev))
-		return i2c_dw_poll_adap_quirk(dev);
-
 	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
 		irq_flags = IRQF_NO_SUSPEND;
 	} else {
@@ -1046,15 +986,17 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 	if (ret)
 		return ret;
 
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
+	__i2c_dw_write_intr_mask(dev, 0);
 	i2c_dw_release_lock(dev);
 
-	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
-			       dev_name(dev->dev), dev);
-	if (ret) {
-		dev_err(dev->dev, "failure requesting irq %i: %d\n",
-			dev->irq, ret);
-		return ret;
+	if (!(dev->flags & ACCESS_POLLING)) {
+		ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr,
+				       irq_flags, dev_name(dev->dev), dev);
+		if (ret) {
+			dev_err(dev->dev, "failure requesting irq %i: %d\n",
+				dev->irq, ret);
+			return ret;
+		}
 	}
 
 	ret = i2c_dw_init_recovery_info(dev);
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 61d7a27aa070..9be9a2658e1f 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -154,7 +154,7 @@ static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 {
 	struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
 
-	dev->flags |= MODEL_AMD_NAVI_GPU;
+	dev->flags |= MODEL_AMD_NAVI_GPU | ACCESS_POLLING;
 	dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 855b698e99c0..4ab41ba39d55 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -290,7 +290,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 	dev->flags = (uintptr_t)device_get_match_data(&pdev->dev);
 	if (device_property_present(&pdev->dev, "wx,i2c-snps-model"))
-		dev->flags = MODEL_WANGXUN_SP;
+		dev->flags = MODEL_WANGXUN_SP | ACCESS_POLLING;
 
 	dev->dev = &pdev->dev;
 	dev->irq = irq;
diff --git a/drivers/i2c/busses/i2c-hisi.c b/drivers/i2c/busses/i2c-hisi.c
index dfad5bad5075..975c0b1c44de 100644
--- a/drivers/i2c/busses/i2c-hisi.c
+++ b/drivers/i2c/busses/i2c-hisi.c
@@ -57,6 +57,8 @@
 #define   HISI_I2C_FS_SPK_LEN_CNT	GENMASK(7, 0)
 #define HISI_I2C_HS_SPK_LEN		0x003c
 #define   HISI_I2C_HS_SPK_LEN_CNT	GENMASK(7, 0)
+#define HISI_I2C_TX_INT_CLR		0x0040
+#define   HISI_I2C_TX_AEMPTY_INT		BIT(0)
 #define HISI_I2C_INT_MSTAT		0x0044
 #define HISI_I2C_INT_CLR		0x0048
 #define HISI