ARM: sa1100: remove unused board files

The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and
Simpad machines were all marked as unused as there are no known users
left. Remove all of these, along with references to them in defconfig
files and drivers.

Four machines remain now: Assabet, Collie (Zaurus SL5500), iPAQ H3600
and Jornada 720, each of which had one person still using them, with
Collie also being supported in Qemu.

Cc: Peter Chubb <peter.chubb@unsw.edu.au>
Cc: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

34 files changed, 4 insertions, 3075 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 370f438b1070..c03be77e8060 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2633,17 +2633,6 @@ S:	Maintained
 W:	http://hackndev.com
 F:	arch/arm/mach-pxa/palmz72.*
 
-ARM/PLEB SUPPORT
-M:	Peter Chubb <pleb@gelato.unsw.edu.au>
-S:	Maintained
-W:	http://www.disy.cse.unsw.edu.au/Hardware/PLEB
-
-ARM/PT DIGITAL BOARD PORT
-M:	Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-W:	http://www.armlinux.org.uk/
-
 ARM/QUALCOMM SUPPORT
 M:	Andy Gross <agross@kernel.org>
 M:	Bjorn Andersson <andersson@kernel.org>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2efd0d91a0a0..7742b35fe23a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -927,12 +927,6 @@ config ISA
 config ISA_DMA_API
 	bool
 
-config PCI_NANOENGINE
-	bool "BSE nanoEngine PCI support"
-	depends on SA1100_NANOENGINE
-	help
-	  Enable PCI on the BSE nanoEngine board.
-
 config ARM_ERRATA_814220
 	bool "ARM errata: Cache maintenance by set/way operations can execute out of order"
 	depends on CPU_V7
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 95abdd850fe3..23eae1a65064 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -20,10 +20,6 @@ __SA1100_start:
 #ifdef CONFIG_SA1100_COLLIE
 		mov	r7, #MACH_TYPE_COLLIE
 #endif
-#ifdef CONFIG_SA1100_SIMPAD
-		@ UNTIL we've something like an open bootldr
-		mov	r7, #MACH_TYPE_SIMPAD	@should be 87
-#endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		ands	r0, r0, #0x0d
 		beq	99f
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
deleted file mode 100644
index 337e5c9718ae..000000000000
--- a/arch/arm/configs/badge4_defconfig
+++ /dev/null
@@ -1,105 +0,0 @@
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_BADGE4=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3"
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIVHCI=m
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_SA1100=y
-CONFIG_PARPORT=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_ELEKTOR=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SA1100_WATCHDOG=m
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_MINIX_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
deleted file mode 100644
index 9ada868e2648..000000000000
--- a/arch/arm/configs/cerfcube_defconfig
+++ /dev/null
@@ -1,73 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_CERF=y
-CONFIG_SA1100_CERF_FLASH_16MB=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc"
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_FPE_FASTFPE=y
-CONFIG_PM=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_SA1100=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_SMB_FS=m
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
deleted file mode 100644
index 3c91a851fd08..000000000000
--- a/arch/arm/configs/hackkit_defconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_HACKKIT=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell"
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
deleted file mode 100644
index 916177d07a39..000000000000
--- a/arch/arm/configs/lart_defconfig
+++ /dev/null
@@ -1,64 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_LART=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram"
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_MODULES=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_LART=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_USER=y
-CONFIG_CRC32=m
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
deleted file mode 100644
index fd2667873273..000000000000
--- a/arch/arm/configs/pleb_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_SHMEM is not set
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_PLEB=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M"
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-# CONFIG_SWAP is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NLS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
deleted file mode 100644
index dfcea70b8034..000000000000
--- a/arch/arm/configs/shannon_defconfig
+++ /dev/null
@@ -1,45 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_SHANNON=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
-CONFIG_PCMCIA_SMC91C92=y
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_SA1100=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
deleted file mode 100644
index 4e00a4c2c287..000000000000
--- a/arch/arm/configs/simpad_defconfig
+++ /dev/null
@@ -1,100 +0,0 @@
-CONFIG_LOCALVERSION="oe1"
-CONFIG_SYSVIPC=y
-CONFIG_PREEMPT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_SIMPAD=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO=m
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 8b6360e363d1..0fb4c24cfad5 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -41,35 +41,6 @@ config ASSABET_NEPONSET
 	  Microprocessor Development Board (Assabet)  with the SA-1111
 	  Development Board (Nepon).
 
-config SA1100_CERF
-	bool "CerfBoard"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1110_CPUFREQ
-	select LEDS_GPIO_REGISTER
-	help
-	  The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
-	  More information is available at:
-	  <http://www.intrinsyc.com/products/cerfboard/>.
-
-	  Say Y if configuring for an Intrinsyc CerfBoard.
-	  Say N otherwise.
-
-choice
-	prompt "Cerf Flash available"
-	depends on SA1100_CERF
-	default SA1100_CERF_FLASH_8MB
-
-config SA1100_CERF_FLASH_8MB
-	bool "8MB"
-
-config SA1100_CERF_FLASH_16MB
-	bool "16MB"
-
-config SA1100_CERF_FLASH_32MB
-	bool "32MB"
-
-endchoice
-
 config SA1100_COLLIE
 	bool "Sharp Zaurus SL5500"
 	# FIXME: select ARM_SA11x0_CPUFREQ
@@ -79,16 +50,6 @@ config SA1100_COLLIE
 	help
 	  Say Y here to support the Sharp Zaurus SL5500 PDAs.
 
-config SA1100_H3100
-	bool "Compaq iPAQ H3100"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1110_CPUFREQ
-	select HTC_EGPIO
-	select MFD_IPAQ_MICRO
-	help
-	  Say Y here if you intend to run this kernel on the Compaq iPAQ
-	  H3100 handheld computer.
-
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
 	select ARM_SA1110_CPUFREQ
@@ -98,15 +59,6 @@ config SA1100_H3600
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3600 and H3700 handheld computers.
 
-config SA1100_BADGE4
-	bool "HP Labs BadgePAD 4"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1100_CPUFREQ
-	select SA1111
-	help
-	  Say Y here if you want to build a kernel for the HP Laboratories
-	  BadgePAD 4.
-
 config SA1100_JORNADA720
 	bool "HP Jornada 720"
 	# FIXME: select ARM_SA11x0_CPUFREQ
@@ -126,71 +78,8 @@ config SA1100_JORNADA720_SSP
 	  keyboard, touchscreen, backlight and battery. This driver also activates
 	  the generic SSP which it extends.
 
-config SA1100_HACKKIT
-	bool "HackKit Core CPU Board"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1100_CPUFREQ
-	help
-	  Say Y here to support the HackKit Core CPU Board
-	  <http://hackkit.eletztrick.de>;
-
-config SA1100_LART
-	bool "LART"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1100_CPUFREQ
-	help
-	  Say Y here if you are using the Linux Advanced Radio Terminal
-	  (also known as the LART).  See <http://www.lartmaker.nl/> for
-	  information on the LART.
-
-config SA1100_NANOENGINE
-	bool "nanoEngine"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1110_CPUFREQ
-	select FORCE_PCI
-	select PCI_NANOENGINE
-	help
-	  Say Y here if you are using the Bright Star Engineering nanoEngine.
-	  See <http://www.brightstareng.com/arm/nanoeng.htm> for information
-	  on the BSE nanoEngine.
-
-config SA1100_PLEB
-	bool "PLEB"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1100_CPUFREQ
-	help
-	  Say Y here if you are using version 1 of the Portable Linux
-	  Embedded Board (also known as PLEB).
-	  See <http://www.disy.cse.unsw.edu.au/Hardware/PLEB/>
-	  for more information.
-
-config SA1100_SHANNON
-	bool "Shannon"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1100_CPUFREQ
-	select REGULATOR
-	select REGULATOR_FIXED_VOLTAGE
-	help
-	  The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
-	  limited edition webphone produced by Philips. The Shannon is a SA1100
-	  platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots,
-	  and a telco interface.
-
-config SA1100_SIMPAD
-	bool "Simpad"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1110_CPUFREQ
-	help
-	  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
-	  are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
-	  FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
-	  PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same
-	  like CL4 in additional it has a PCMCIA-Slot. For more information
-	  visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>.
-
 config SA1100_SSP
 	tristate "Generic PIO SSP"
-	depends on UNUSED_BOARD_FILES
 	help
 	  Say Y here to enable support for the generic PIO SSP driver.
 	  This isn't for audio support, but for attached sensors and
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 28c1cae0053f..b5816d675152 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -9,32 +9,11 @@ obj-y := clock.o generic.o #nmi-oopser.o
 # Specific board support
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o
 obj-$(CONFIG_ASSABET_NEPONSET)		+= neponset.o
-
-obj-$(CONFIG_SA1100_BADGE4)		+= badge4.o
-
-obj-$(CONFIG_SA1100_CERF)		+= cerf.o
-
 obj-$(CONFIG_SA1100_COLLIE)		+= collie.o
-
-obj-$(CONFIG_SA1100_H3100)		+= h3100.o h3xxx.o
 obj-$(CONFIG_SA1100_H3600)		+= h3600.o h3xxx.o
-
-obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o
-
 obj-$(CONFIG_SA1100_JORNADA720)		+= jornada720.o
 obj-$(CONFIG_SA1100_JORNADA720_SSP)	+= jornada720_ssp.o
 
-obj-$(CONFIG_SA1100_LART)		+= lart.o
-
-obj-$(CONFIG_SA1100_NANOENGINE)		+= nanoengine.o
-obj-$(CONFIG_PCI_NANOENGINE)		+= pci-nanoengine.o
-
-obj-$(CONFIG_SA1100_PLEB)		+= pleb.o
-
-obj-$(CONFIG_SA1100_SHANNON)		+= shannon.o
-
-obj-$(CONFIG_SA1100_SIMPAD)		+= simpad.o
-
 # Miscellaneous functions
 obj-$(CONFIG_PM)			+= pm.o sleep.o
 obj-$(CONFIG_SA1100_SSP)		+= ssp.o
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
deleted file mode 100644
index de79f3502045..000000000000
--- a/arch/arm/mach-sa1100/badge4.c
+++ /dev/null
@@ -1,338 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-sa1100/badge4.c
- *
- * BadgePAD 4 specific initialization
- *
- *   Tim Connors <connors@hpl.hp.com>
- *   Christopher Hoover <ch@hpl.hp.com>
- *
- * Copyright (C) 2002 Hewlett-Packard Company
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <mach/irqs.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/sa1111.h>
-
-#include <mach/badge4.h>
-
-#include "generic.h"
-
-static struct resource sa1111_resources[] = {
-	[0] = DEFINE_RES_MEM(BADGE4_SA1111_BASE, 0x2000),
-	[1] = DEFINE_RES_IRQ(BADGE4_IRQ_GPIO_SA1111),
-};
-
-static int badge4_sa1111_enable(void *data, unsigned devid)
-{
-	if (devid == SA1111_DEVID_USB)
-		badge4_set_5V(BADGE4_5V_USB, 1);
-	return 0;
-}
-
-static void badge4_sa1111_disable(void *data, unsigned devid)
-{
-	if (devid == SA1111_DEVID_USB)
-		badge4_set_5V(BADGE4_5V_USB, 0);
-}
-
-static struct sa1111_platform_data sa1111_info = {
-	.disable_devs	= SA1111_DEVID_PS2_MSE,
-	.enable		= badge4_sa1111_enable,
-	.disable	= badge4_sa1111_disable,
-};
-
-static u64 sa1111_dmamask = 0xffffffffUL;
-
-static struct platform_device sa1111_device = {
-	.name		= "sa1111",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &sa1111_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-		.platform_data = &sa1111_info,
-	},
-	.num_resources	= ARRAY_SIZE(sa1111_resources),
-	.resource	= sa1111_resources,
-};
-
-/* LEDs */
-struct gpio_led badge4_gpio_leds[] = {
-	{
-		.name			= "badge4:red",
-		.default_trigger	= "heartbeat",
-		.gpio			= 7,
-	},
-	{
-		.name			= "badge4:green",
-		.default_trigger	= "cpu0",
-		.gpio			= 9,
-	},
-};
-
-static struct gpio_led_platform_data badge4_gpio_led_info = {
-	.leds		= badge4_gpio_leds,
-	.num_leds	= ARRAY_SIZE(badge4_gpio_leds),
-};
-
-static struct platform_device badge4_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &badge4_gpio_led_info,
-	}
-};
-
-static struct platform_device *devices[] __initdata = {
-	&sa111