Merge tag 'char-misc-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver patches from Greg KH:
 "Here's the big char/misc driver patches for 3.14-rc1.

  Lots of little things, and a new "big" driver, genwqe.  Full details
  are in the shortlog"

* tag 'char-misc-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
  mei: limit the number of consecutive resets
  mei: revamp mei reset state machine
  drivers/char: don't use module_init in non-modular ttyprintk.c
  VMCI: fix error handling path when registering guest driver
  extcon: gpio: Add power resume support
  Documentation: HOWTO: Updates on subsystem trees, patchwork, -next (vs. -mm) in ko_KR
  Documentation: HOWTO: update for 2.6.x -> 3.x versioning in ko_KR
  Documentation: HOWTO: update stable address in ko_KR
  Documentation: HOWTO: update LXR web link in ko_KR
  char: nwbutton: open-code interruptible_sleep_on
  mei: fix syntax in comments and debug output
  mei: nfc: mei_nfc_free has to be called under lock
  mei: use hbm idle state to prevent spurious resets
  mei: do not run reset flow from the interrupt thread
  misc: genwqe: fix return value check in genwqe_device_create()
  GenWQE: Fix warnings for sparc
  GenWQE: Fix compile problems for Alpha
  Documentation/misc-devices/mei/mei-amt-version.c: remove unneeded call of mei_deinit()
  GenWQE: Rework return code for flash-update ioctl
  sgi-xp: open-code interruptible_sleep_on_timeout
  ...

82 files changed, 9170 insertions, 675 deletions

diff --git a/Documentation/ABI/testing/debugfs-driver-genwqe b/Documentation/ABI/testing/debugfs-driver-genwqe
new file mode 100644
index 000000000000..1c2f25674e8c
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-driver-genwqe
@@ -0,0 +1,91 @@
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/ddcb_info
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    DDCB queue dump used for debugging queueing problems.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/curr_regs
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Dump of the current error registers.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/curr_dbg_uid0
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID0 (unit id 0).
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/curr_dbg_uid1
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID1.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/curr_dbg_uid2
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID2.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/prev_regs
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Dump of the error registers before the last reset of
+                the card occured.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid0
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID0 before card was reset.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid1
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID1 before card was reset.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid2
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID2 before card was reset.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/info
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Comprehensive summary of bitstream version and software
+                version. Used bitstream and bitstream clocking information.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/err_inject
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Possibility to inject error cases to ensure that the drivers
+                error handling code works well.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/vf<0..14>_jobtimeout_msec
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Default VF timeout 250ms. Testing might require 1000ms.
+                Using 0 will use the cards default value (whatever that is).
+
+                The timeout depends on the max number of available cards
+                in the system and the maximum allowed queue size.
+
+                The driver ensures that the settings are done just before
+                the VFs get enabled. Changing the timeouts in flight is not
+                possible.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/jobtimer
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Dump job timeout register values for PF and VFs.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/queue_working_time
+Date:           Dec 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Dump queue working time register values for PF and VFs.
+                Only available for PF.
diff --git a/Documentation/ABI/testing/sysfs-driver-genwqe b/Documentation/ABI/testing/sysfs-driver-genwqe
new file mode 100644
index 000000000000..1870737a1f5e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-genwqe
@@ -0,0 +1,62 @@
+What:           /sys/class/genwqe/genwqe<n>_card/version
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Unique bitstream identification e.g.
+                '0000000330336283.00000000475a4950'.
+
+What:           /sys/class/genwqe/genwqe<n>_card/appid
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Identifies the currently active card application e.g. 'GZIP'
+                for compression/decompression.
+
+What:           /sys/class/genwqe/genwqe<n>_card/type
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Type of the card e.g. 'GenWQE5-A7'.
+
+What:           /sys/class/genwqe/genwqe<n>_card/curr_bitstream
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Currently active bitstream. 1 is default, 0 is backup.
+
+What:           /sys/class/genwqe/genwqe<n>_card/next_bitstream
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Interface to set the next bitstream to be used.
+
+What:           /sys/class/genwqe/genwqe<n>_card/tempsens
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Interface to read the cards temperature sense register.
+
+What:           /sys/class/genwqe/genwqe<n>_card/freerunning_timer
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Interface to read the cards free running timer.
+                Used for performance and utilization measurements.
+
+What:           /sys/class/genwqe/genwqe<n>_card/queue_working_time
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Interface to read queue working time.
+                Used for performance and utilization measurements.
+
+What:           /sys/class/genwqe/genwqe<n>_card/state
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    State of the card: "unused", "used", "error".
+
+What:           /sys/class/genwqe/genwqe<n>_card/base_clock
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Base clock frequency of the card.
+
+What:           /sys/class/genwqe/genwqe<n>_card/device/sriov_numvfs
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Enable VFs (1..15):
+                  sudo sh -c 'echo 15 > \
+                    /sys/bus/pci/devices/0000\:1b\:00.0/sriov_numvfs'
+                Disable VFs:
+                  Write a 0 into the same sysfs entry.
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 27faae3e3846..57cf5efb044d 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -112,7 +112,7 @@ required reading:
 
     Other excellent descriptions of how to create patches properly are:
 	"The Perfect Patch"
-		http://kerneltrap.org/node/3737
+		http://www.ozlabs.org/~akpm/stuff/tpp.txt
 	"Linux kernel patch submission format"
 		http://linux.yyz.us/patch-format.html
 
@@ -579,7 +579,7 @@ all time.  It should describe the patch completely, containing:
 For more details on what this should all look like, please see the
 ChangeLog section of the document:
   "The Perfect Patch"
-      http://userweb.kernel.org/~akpm/stuff/tpp.txt
+      http://www.ozlabs.org/~akpm/stuff/tpp.txt
 
 
 
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 1196290082d1..78530e621a1e 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -20,6 +20,10 @@ TC/TCLIB Timer required properties:
 - interrupts: Should contain all interrupts for the TC block
   Note that you can specify several interrupt cells if the TC
   block has one interrupt per channel.
+- clock-names: tuple listing input clock names.
+	Required elements: "t0_clk"
+	Optional elements: "t1_clk", "t2_clk"
+- clocks: phandles to input clocks.
 
 Examples:
 
@@ -28,6 +32,8 @@ One interrupt per TC block:
 		compatible = "atmel,at91rm9200-tcb";
 		reg = <0xfff7c000 0x100>;
 		interrupts = <18 4>;
+		clocks = <&tcb0_clk>;
+		clock-names = "t0_clk";
 	};
 
 One interrupt per TC channel in a TC block:
@@ -35,6 +41,8 @@ One interrupt per TC channel in a TC block:
 		compatible = "atmel,at91rm9200-tcb";
 		reg = <0xfffdc000 0x100>;
 		interrupts = <26 4 27 4 28 4>;
+		clocks = <&tcb1_clk>;
+		clock-names = "t0_clk";
 	};
 
 RSTC Reset Controller required properties:
diff --git a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
index 7dab6a8f4a0e..45414bbcd945 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
@@ -2,7 +2,11 @@ EXTCON FOR PALMAS/TWL CHIPS
 
 PALMAS USB COMPARATOR
 Required Properties:
- - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb"
+ - compatible: should contain one of:
+   * "ti,palmas-usb-vid".
+   * "ti,twl6035-usb-vid".
+   * "ti,palmas-usb" (DEPRECATED - use "ti,palmas-usb-vid").
+   * "ti,twl6035-usb" (DEPRECATED - use "ti,twl6035-usb-vid").
 
 Optional Properties:
  - ti,wakeup : To enable the wakeup comparator in probe
diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
index a45ae08c8ed1..60960b2755f4 100644
--- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
+++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -6,6 +6,9 @@ Required properties:
 	- atmel,at91sam9g45-ssc: support dma transfer
 - reg: Should contain SSC registers location and length
 - interrupts: Should contain SSC interrupt
+- clock-names: tuple listing input clock names.
+	Required elements: "pclk"
+- clocks: phandles to input clocks.
 
 
 Required properties for devices compatible with "atmel,at91sam9g45-ssc":
@@ -20,6 +23,8 @@ ssc0: ssc@fffbc000 {
 	compatible = "atmel,at91rm9200-ssc";
 	reg = <0xfffbc000 0x4000>;
 	interrupts = <14 4 5>;
+	clocks = <&ssc0_clk>;
+	clock-names = "pclk";
 };
 
 - DMA transfer:
diff --git a/Documentation/devicetree/bindings/misc/bmp085.txt b/Documentation/devicetree/bindings/misc/bmp085.txt
index 91dfda2e4e11..d7a6deb6b21e 100644
--- a/Documentation/devicetree/bindings/misc/bmp085.txt
+++ b/Documentation/devicetree/bindings/misc/bmp085.txt
@@ -8,6 +8,8 @@ Optional properties:
 - temp-measurement-period: temperature measurement period (milliseconds)
 - default-oversampling: default oversampling value to be used at startup,
   value range is 0-3 with rising sensitivity.
+- interrupt-parent: should be the phandle for the interrupt controller
+- interrupts: interrupt mapping for IRQ
 
 Example:
 
@@ -17,4 +19,6 @@ pressure@77 {
 	chip-id = <10>;
 	temp-measurement-period = <100>;
 	default-oversampling = <2>;
+	interrupt-parent = <&gpio0>;
+	interrupts = <25 IRQ_TYPE_EDGE_RISING>;
 };
diff --git a/Documentation/extcon/porting-android-switch-class b/Documentation/extcon/porting-android-switch-class
index 5377f6317961..49c81caef84d 100644
--- a/Documentation/extcon/porting-android-switch-class
+++ b/Documentation/extcon/porting-android-switch-class
@@ -50,7 +50,7 @@ so that they are still compatible with legacy userspace processes.
 	Extcon's extended features for switch device drivers with
 	complex features usually required magic numbers in state
 	value of switch_dev. With extcon, such magic numbers that
-	support multiple cables (
+	support multiple cables are no more required or supported.
 
   1. Define cable names at edev->supported_cable.
   2. (Recommended) remove print_state callback.
@@ -114,11 +114,8 @@ exclusive, the two cables cannot be in ATTACHED state simulteneously.
 
 ****** ABI Location
 
-  If "CONFIG_ANDROID" is enabled and "CONFIG_ANDROID_SWITCH" is
-disabled, /sys/class/switch/* are created as symbolic links to
-/sys/class/extcon/*. Because CONFIG_ANDROID_SWITCH creates
-/sys/class/switch directory, we disable symboling linking if
-CONFIG_ANDROID_SWITCH is enabled.
+  If "CONFIG_ANDROID" is enabled, /sys/class/switch/* are created
+as symbolic links to /sys/class/extcon/*.
 
   The two files of switch class, name and state, are provided with
 extcon, too. When the multistate support (STEP 2 of CHAPTER 1.) is
diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO
index 8148a47fc70e..0091a8215ac1 100644
--- a/Documentation/ja_JP/HOWTO
+++ b/Documentation/ja_JP/HOWTO
@@ -149,7 +149,7 @@ linux-api@ver.kernel.org に送ることを勧めます。
      この他にパッチを作る方法についてのよくできた記述は-
 
 	"The Perfect Patch"
-		http://userweb.kernel.org/~akpm/stuff/tpp.txt
+		http://www.ozlabs.org/~akpm/stuff/tpp.txt
 	"Linux kernel patch submission format"
 		http://linux.yyz.us/patch-format.html
 
@@ -622,7 +622,7 @@ Linux カーネルコミュニティは、一度に大量のコードの塊を�
 これについて全てがどのようにあるべきかについての詳細は、以下のドキュメ
 ントの ChangeLog セクションを見てください-
   "The Perfect Patch"
-      http://userweb.kernel.org/~akpm/stuff/tpp.txt
+      http://www.ozlabs.org/~akpm/stuff/tpp.txt
 
 これらのどれもが、時にはとても困難です。これらの慣例を完璧に実施するに
 は数年