Merge tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.14 kernel. Not so
  much going on. No core changes, just drivers.

  The most interesting would be that MIPS Ralink is migrating to pin
  control and we have some bindings but not yet code for the Apple M1
  pin controller.

  New drivers:

   - Last merge window we created a driver for the Ralink RT2880. We are
     now moving the Ralink SoC pin control drivers out of the MIPS
     architecture code and into the pin control subsystem. This concerns
     RT288X, MT7620, RT305X, RT3883 and MT7621.

   - Qualcomm SM6125 SoC pin control driver.

   - Qualcomm spmi-gpio support for PM7325.

   - Qualcomm spmi-mpp also handles PMI8994 (just a compatible string)

   - Mediatek MT8365 SoC pin controller.

   - New device HID for the AMD GPIO controller.

  Improvements:

   - Pin bias config support for a slew of Renesas pin controllers.

   - Incremental improvements and non-urgent bug fixes to the Renesas
     SoC drivers.

   - Implement irq_set_wake on the AMD pin controller so we can wake up
     from external pin events.

  Misc:

   - Devicetree bindings for the Apple M1 pin controller, we will
     probably see a proper driver for this soon as well"

* tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (54 commits)
  pinctrl: ralink: rt305x: add missing include
  pinctrl: stm32: check for IRQ MUX validity during alloc()
  pinctrl: zynqmp: some code cleanups
  drivers: qcom: pinctrl: Add pinctrl driver for sm6125
  dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver
  dt-bindings: pinctrl: mcp23s08: add documentation for reset-gpios
  pinctrl: mcp23s08: Add optional reset GPIO
  pinctrl: mediatek: fix mode encoding
  pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq()
  pinctrl: bcm: Constify static pinmux_ops
  pinctrl: bcm: Constify static pinctrl_ops
  pinctrl: ralink: move RT288X SoC pinmux config into a new 'pinctrl-rt288x.c' file
  pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' file
  pinctrl: ralink: move RT305X SoC pinmux config into a new 'pinctrl-rt305x.c' file
  pinctrl: ralink: move RT3883 SoC pinmux config into a new 'pinctrl-rt3883.c' file
  pinctrl: ralink: move MT7621 SoC pinmux config into a new 'pinctrl-mt7621.c' file
  pinctrl: ralink: move ralink architecture pinmux header into the driver
  pinctrl: single: config: enable the pin's input
  pinctrl: mtk: Fix mt8365 Kconfig dependency
  pinctrl: mcp23s08: fix race condition in irq handler
  ...

86 files changed, 7498 insertions, 1020 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
new file mode 100644
index 000000000000..d50571affd1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/apple,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple GPIO controller
+
+maintainers:
+  - Mark Kettenis <kettenis@openbsd.org>
+
+description: |
+  The Apple GPIO controller is a simple combined pin and GPIO
+  controller present on Apple ARM SoC platforms, including various
+  iPhone and iPad devices and the "Apple Silicon" Macs.
+
+properties:
+  compatible:
+    items:
+      - const: apple,t8103-pinctrl
+      - const: apple,pinctrl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupts:
+    description: One interrupt for each of the (up to 7) interrupt
+      groups supported by the controller sorted by interrupt group
+      number in ascending order.
+    minItems: 1
+    maxItems: 7
+
+  interrupt-controller: true
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      pinmux:
+        description:
+          Values are constructed from pin number and alternate function
+          configuration number using the APPLE_PINMUX() helper macro
+          defined in include/dt-bindings/pinctrl/apple.h.
+
+    required:
+      - pinmux
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/pinctrl/apple.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pinctrl: pinctrl@23c100000 {
+        compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+        reg = <0x2 0x3c100000 0x0 0x100000>;
+        clocks = <&gpio_clk>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 0 212>;
+
+        interrupt-controller;
+        interrupt-parent = <&aic>;
+        interrupts = <AIC_IRQ 16 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 17 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 18 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 19 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 20 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 21 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 22 IRQ_TYPE_LEVEL_HIGH>;
+
+        pcie_pins: pcie-pins {
+          pinmux = <APPLE_PINMUX(150, 1)>,
+                   <APPLE_PINMUX(151, 1)>,
+                   <APPLE_PINMUX(32, 1)>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index ad91c0bc54da..ad2866c99738 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -46,8 +46,8 @@ patternProperties:
                   PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
                   RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
                   SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,
-                  SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ,
-                  SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
+                  SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
+                  SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
                   SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,
                   TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
                   THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
@@ -74,9 +74,9 @@ patternProperties:
                   RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,
                   SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,
                   SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,
-                  SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
-                  SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR,
-                  SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
+                  SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2,
+                  SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
+                  SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
                   TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,
                   TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,
                   TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt
deleted file mode 100644
index 8ab2d468dbdb..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Broadcom Northstar pins mux controller
-
-Some of Northstar SoCs's pins can be used for various purposes thanks to the mux
-controller. This binding allows describing mux controller and listing available
-functions. They can be referenced later by other bindings to let system
-configure controller correctly.
-
-A list of pins varies across chipsets so few bindings are available.
-
-Node of the pinmux must be nested in the CRU (Central Resource Unit) "syscon"
-noce.
-
-Required properties:
-- compatible: must be one of:
-	"brcm,bcm4708-pinmux"
-	"brcm,bcm4709-pinmux"
-	"brcm,bcm53012-pinmux"
-- offset: offset of pin registers in the CRU block
-
-Functions and their groups available for all chipsets:
-- "spi": "spi_grp"
-- "i2c": "i2c_grp"
-- "pwm": "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"
-- "uart1": "uart1_grp"
-
-Additionally available on BCM4709 and BCM53012:
-- "mdio": "mdio_grp"
-- "uart2": "uart2_grp"
-- "sdio": "sdio_pwr_grp", "sdio_1p8v_grp"
-
-For documentation of subnodes see:
-Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-Example:
-	dmu@1800c000 {
-		compatible = "simple-bus";
-		ranges = <0 0x1800c000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		cru@100 {
-			compatible = "syscon", "simple-mfd";
-			reg = <0x100 0x1a4>;
-
-			pinctrl {
-				compatible = "brcm,bcm4708-pinmux";
-				offset = <0xc0>;
-
-				spi-pins {
-					function = "spi";
-					groups = "spi_grp";
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
new file mode 100644
index 000000000000..470aff599c27
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,ns-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar pins mux controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description:
+  Some of Northstar SoCs's pins can be used for various purposes thanks to the
+  mux controller. This binding allows describing mux controller and listing
+  available functions. They can be referenced later by other bindings to let
+  system configure controller correctly.
+
+  A list of pins varies across chipsets so few bindings are available.
+
+  Node of the pinmux must be nested in the CRU (Central Resource Unit) "syscon"
+  node.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm4708-pinmux
+      - brcm,bcm4709-pinmux
+      - brcm,bcm53012-pinmux
+
+  offset:
+    description: offset of pin registers in the CRU block
+    maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+patternProperties:
+  '-pins$':
+    type: object
+    description: pin node
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ spi, i2c, pwm, uart1, mdio, uart2, sdio ]
+      groups:
+        minItems: 1
+        maxItems: 4
+        items:
+          enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp,
+                  uart1_grp, mdio_grp, uart2_grp, sdio_pwr_grp, sdio_1p8v_grp ]
+
+    required:
+      - function
+      - groups
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm4708-pinmux
+    then:
+      patternProperties:
+        '-pins$':
+          properties:
+            function:
+              enum: [ spi, i2c, pwm, uart1 ]
+            groups:
+              items:
+                enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp,
+                        uart1_grp ]
+
+required:
+  - offset
+
+additionalProperties: false
+
+examples:
+  - |
+    cru@1800c100 {
+        compatible = "syscon", "simple-mfd";
+        reg = <0x1800c100 0x1a4>;
+
+        pinctrl {
+            compatible = "brcm,bcm4708-pinmux";
+            offset = <0xc0>;
+
+            spi-pins {
+                function = "spi";
+                groups = "spi_grp";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
index 6ec3c8d79f49..2fa5edac7a35 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
@@ -49,6 +49,7 @@ Optional properties:
 - interrupt-controller: Marks the device node as a interrupt controller.
 - drive-open-drain: Sets the ODR flag in the IOCON register. This configures
         the