Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux

Pull embedded i2c changes from Wolfram Sang:
 "Changes for the "embedded" part of the I2C subsystem:

   - lots of devicetree conversions of drivers (and preparations for
     that)
   - big cleanups for drivers for OMAP, Tegra, Nomadik, Blackfin
   - Rafael's struct dev_pm_ops conversion patches for I2C
   - usual driver cleanups and fixes

  All patches have been in linux-next for an apropriate time and all
  patches touching files outside of i2c-folders should have proper acks
  from the maintainers."

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (60 commits)
  Revert "i2c: tegra: convert normal suspend/resume to *_noirq"
  I2C: MV64XYZ: Add Device Tree support
  i2c: stu300: use devm managed resources
  i2c: i2c-ocores: support for 16bit and 32bit IO
  V4L/DVB: mfd: use reg_shift instead of regstep
  i2c: i2c-ocores: Use reg-shift property
  i2c: i2c-ocores: DT bindings and minor fixes.
  i2c: mv64xxxx: remove EXPERIMENTAL tag
  i2c-s3c2410: Use plain pm_runtime_put()
  i2c: s3c2410: Fix pointer type passed to of_match_node()
  i2c: mxs: Set I2C timing registers for mxs-i2c
  i2c: i2c-bfin-twi: Move blackfin TWI register access Macro to head file.
  i2c: i2c-bfin-twi: Move TWI peripheral pin request array to platform data.
  i2c:i2c-bfin-twi: include twi head file
  i2c:i2c-bfin-twi: TWI fails to restart next transfer in high system load.
  i2c: i2c-bfin-twi: Tighten condition when failing I2C transfer if MEN bit is reset unexpectedly.
  i2c: i2c-bfin-twi: Break dead waiting loop if i2c device misbehaves.
  i2c: i2c-bfin-twi: Improve the patch for bug "Illegal i2c bus lock upon certain transfer scenarios".
  i2c: i2c-bfin-twi: Illegal i2c bus lock upon certain transfer scenarios.
  i2c-mv64xxxx: allow more than one driver instance
  ...

Conflicts:
	drivers/i2c/busses/i2c-nomadik.c

25 files changed, 693 insertions, 567 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio_i2c.txt b/Documentation/devicetree/bindings/i2c/gpio-i2c.txt
index 4f8ec947c6bd..4f8ec947c6bd 100644
--- a/Documentation/devicetree/bindings/gpio/gpio_i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/gpio-i2c.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
index 1bfc02de1b0c..30ac3a0557f7 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
@@ -4,6 +4,8 @@ Required properties:
 - compatible: Should be "fsl,<chip>-i2c"
 - reg: Should contain registers location and length
 - interrupts: Should contain ERROR and DMA interrupts
+- clock-frequency: Desired I2C bus clock frequency in Hz.
+                   Only 100000Hz and 400000Hz modes are supported.
 
 Examples:
 
@@ -13,4 +15,5 @@ i2c0: i2c@80058000 {
 	compatible = "fsl,imx28-i2c";
 	reg = <0x80058000 2000>;
 	interrupts = <111 68>;
+	clock-frequency = <100000>;
 };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
new file mode 100644
index 000000000000..c15781f4dc8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
@@ -0,0 +1,33 @@
+Device tree configuration for i2c-ocores
+
+Required properties:
+- compatible      : "opencores,i2c-ocores"
+- reg             : bus address start and address range size of device
+- interrupts      : interrupt number
+- clock-frequency : frequency of bus clock in Hz
+- #address-cells  : should be <1>
+- #size-cells     : should be <0>
+
+Optional properties:
+- reg-shift       : device register offsets are shifted by this value
+- reg-io-width    : io register width in bytes (1, 2 or 4)
+- regstep         : deprecated, use reg-shift above
+
+Example:
+
+	i2c0: ocores@a0000000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "opencores,i2c-ocores";
+		reg = <0xa0000000 0x8>;
+		interrupts = <10>;
+		clock-frequency = <20000000>;
+
+		reg-shift = <0>;	/* 8 bit registers */
+		reg-io-width = <1>;	/* 8 bit read/write */
+
+		dummy@60 {
+			compatible = "dummy";
+			reg = <0x60>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
index b891ee218354..0f7945019f6f 100644
--- a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
@@ -1,4 +1,4 @@
-* I2C
+* Marvell MMP I2C controller
 
 Required properties :
 
@@ -32,3 +32,20 @@ Examples:
 		interrupts = <58>;
 	};
 
+* Marvell MV64XXX I2C controller
+
+Required properties :
+
+ - reg             : Offset and length of the register set for the device
+ - compatible      : Should be "marvell,mv64xxx-i2c"
+ - interrupts      : The interrupt number
+ - clock-frequency : Desired I2C bus clock frequency in Hz.
+
+Examples:
+
+	i2c@11000 {
+		compatible = "marvell,mv64xxx-i2c";
+		reg = <0x11000 0x20>;
+		interrupts = <29>;
+		clock-frequency = <100000>;
+	};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 915db89e3644..787efac68da8 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -660,6 +660,7 @@
 				compatible = "fsl,imx28-i2c";
 				reg = <0x80058000 2000>;
 				interrupts = <111 68>;
+				clock-frequency = <100000>;
 				status = "disabled";
 			};
 
@@ -669,6 +670,7 @@
 				compatible = "fsl,imx28-i2c";
 				reg = <0x8005a000 2000>;
 				interrupts = <110 69>;
+				clock-frequency = <100000>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index a310222951da..8f421c0ca45c 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -15,6 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
+#include <linux/platform_data/i2c-nomadik.h>
 #include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
@@ -40,7 +41,6 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
 
-#include <plat/i2c.h>
 #include <plat/ste_dma40.h>
 #include <plat/gpio-nomadik.h>
 
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 6e4706560266..ecdd8386cffb 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -12,7 +12,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/sys_soc.h>
 #include <linux/amba/bus.h>
-#include <plat/i2c.h>
+#include <linux/platform_data/i2c-nomadik.h>
 #include <mach/crypto-ux500.h>
 
 struct spi_master_cntlr;
@@ -56,27 +56,15 @@ dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
 
 struct nmk_i2c_controller;
 
-static inline struct platform_device *
+static inline struct amba_device *
 dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
 	       struct nmk_i2c_controller *data)
 {
-	struct resource res[] = {
-		DEFINE_RES_MEM(base, SZ_4K),
-		DEFINE_RES_IRQ(irq),
-	};
+	/* Conjure a name similar to what the platform device used to have */
+	char name[16];
 
-	struct platform_device_info pdevinfo = {
-		.parent = parent,
-		.name = "nmk-i2c",
-		.id = id,
-		.res = res,
-		.num_res = ARRAY_SIZE(res),
-		.data = data,
-		.size_data = sizeof(*data),
-		.dma_mask = DMA_BIT_MASK(32),
-	};
-
-	return platform_device_register_full(&pdevinfo);
+	snprintf(name, sizeof(name), "nmk-i2c.%d", id);
+	return amba_apb_device_add(parent, name, base, SZ_4K, irq, 0, data, 0);
 }
 
 static inline struct amba_device *
diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h
index 375cdd0cf876..8289d915e615 100644
--- a/arch/arm/plat-mxc/include/mach/i2c.h
+++ b/arch/arm/plat-mxc/include/mach/i2c.h
@@ -15,7 +15,7 @@
  *
  **/
 struct imxi2c_platform_data {
-	int bitrate;
+	u32 bitrate;
 };
 
 #endif /* __ASM_ARCH_I2C_H_ */
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2e7530a4e7b8..b4aaa1bd6728 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -462,7 +462,7 @@ config I2C_MPC
 
 config I2C_MV64XXX
 	tristate "Marvell mv64xxx I2C Controller"
-	depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL
+	depends on (MV64X60 || PLAT_ORION)
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the Marvell 64xxx line of host bridges.
@@ -483,10 +483,11 @@ config I2C_MXS
 
 config I2C_NOMADIK
 	tristate "ST-Ericsson Nomadik/Ux500 I2C Controller"
-	depends on PLAT_NOMADIK
+	depends on ARM_AMBA
 	help
 	  If you say yes to this option, support will be included for the
-	  I2C interface from ST-Ericsson's Nomadik and Ux500 architectures.
+	  I2C interface from ST-Ericsson's Nomadik and Ux500 architectures,
+	  as well as the STA2X11 PCIe I/O HUB.
 
 config I2C_NUC900
 	tristate "NUC900 I2C Driver"
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 1679deef9c89..e24484beef07 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -279,30 +279,31 @@ static int __devexit at91_i2c_remove(struct platform_device *pdev)
 
 /* NOTE: could save a few mA by keeping clock off outside of at91_xfer... */
 
-static int at91_i2c_suspend(struct platform_device *pdev, pm_message_t mesg)
+static int at91_i2c_suspend(struct device *dev)
 {
 	clk_disable(twi_clk);
 	return 0;
 }
 
-static int at91_i2c_resume(struct platform_device *pdev)
+static int at91_i2c_resume(struct device *dev)
 {
 	return clk_enable(twi_clk);
 }
 
+static SIMPLE_DEV_PM_OPS(at91_i2c_pm, at91_i2c_suspend, at91_i2c_resume);
+#define AT91_I2C_PM	(&at91_i2c_pm)
+
 #else
-#define at91_i2c_suspend	NULL
-#define at91_i2c_resume		NULL
+#define AT91_I2C_PM	NULL
 #endif
 
 static struct platform_driver at91_i2c_driver = {
 	.probe		= at91_i2c_probe,
 	.remove		= __devexit_p(at91_i2c_remove),
-	.suspend	= at91_i2c_suspend,
-	.resume		= at91_i2c_resume,
 	.driver		= {
 		.name	= "at91_i2c",
 		.owner	= THIS_MODULE,
+		.pm	= AT91_I2C_PM,
 	},
 };
 
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index cdb59e5b23f7..0cf780fd6ef1 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -25,6 +25,7 @@
 #include <asm/blackfin.h>
 #include <asm/portmux.h>
 #include <asm/irq.h>
+#include <asm/bfin_twi.h>
 
 /* SMBus mode*/
 #define TWI_I2C_MODE_STANDARD		1
@@ -32,56 +33,6 @@
 #define TWI_I2C_MODE_COMBINED		3
 #define TWI_I2C_MODE_REPEAT		4
 
-struct bfin_twi_iface {
-	int			irq;
-	spinlock_t		lock;
-	char			read_write;
-	u8			command;
-	u8			*transPtr;
-	int			readNum;
-	int			writeNum;
-	int			cur_mode;
-	int			manual_stop;
-	int			result;
-	struct i2c_adapter	adap;
-	struct completion	complete;
-	struct i2c_msg 		*pmsg;
-	int			msg_num;
-	int			cur_msg;
-	u16			saved_clkdiv;
-	u16			saved_control;
-	void __iomem		*regs_base;
-};
-
-
-#define DEFINE_TWI_REG(reg, off) \
-static inline u16 read_##reg(struct bfin_twi_iface *iface) \
-	{ return bfin_read16(iface->regs_base + (off)); } \
-static inline void write_##reg(struct bfin_twi_iface *iface, u16 v) \
-	{ bfin_write16(iface->regs_base + (off), v); }
-
-DEFINE_TWI_REG(CLKDIV, 0x00)
-DEFINE_TWI_REG(CONTROL, 0x04)
-DEFINE_TWI_REG(SLAVE_CTL, 0x08)
-DEFINE_TWI_REG(SLAVE_STAT, 0x0C)
-DEFINE_TWI_REG(SLAVE_ADDR, 0x10)
-DEFINE_TWI_REG(MASTER_CTL, 0x14)
-DEFINE_TWI_REG(MASTER_STAT, 0x18)
-DEFINE_TWI_REG(MASTER_ADDR, 0x1C)
-DEFINE_TWI_REG(INT_STAT, 0x20)
-DEFINE_TWI_REG(INT_MASK, 0x24)
-DEFINE_TWI_REG(FIFO_CTL, 0x28)
-DEFINE_TWI_REG(FIFO_STAT, 0x2C)
-DEFINE_TWI_REG(XMT_DATA8, 0x80)
-DEFINE_TWI_REG(XMT_DATA16, 0x84)
-DEFINE_TWI_REG(RCV_DATA8, 0x88)
-DEFINE_TWI_REG(RCV_DATA16, 0x8C)
-
-static const u16 pin_req[2][3] = {
-	{P_TWI0_SCL, P_TWI0_SDA, 0},
-	{P_TWI1_SCL, P_TWI1_SDA, 0},
-};
-
 static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
 					unsigned short twi_int_status)
 {
@@ -99,7 +50,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
 		 */
 		else if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
 			write_MASTER_CTL(iface,
-				read_MASTER_CTL(iface) | MDIR | RSTART);
+				read_MASTER_CTL(iface) | MDIR);
 		else if (iface->manual_stop)
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) | STOP);
@@ -107,10 +58,10 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
 		         iface->cur_msg + 1 < iface->msg_num) {
 			if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
 				write_MASTER_CTL(iface,
-					read_MASTER_CTL(iface) | RSTART | MDIR);
+					read_MASTER_CTL(iface) | MDIR);
 			else
 				write_MASTER_CTL(iface,
-					(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
+					read_MASTER_CTL(iface) & ~MDIR);
 		}
 	}
 	if (twi_int_status & RCVSERV) {
@@ -130,17 +81,25 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
 			}
 			iface->transPtr++;
 			iface->readNum--;
-		} else if (iface->manual_stop) {
-			write_MASTER_CTL(iface,
-				read_MASTER_CTL(iface) | STOP);
-		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
-		           iface->cur_msg + 1 < iface->msg_num) {
-			if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
-				write_MASTER_CTL(iface,
-					read_MASTER_CTL(iface) | RSTART | MDIR);
-			else
+		}
+
+		if (iface->readNum == 0) {
+			if (iface->manual_stop) {
+				/* Temporary workaround to avoid possible bus stall -
+				 * Flush FIFO before issuing the STOP condition
+				 */
+				read_RCV_DATA16(iface);
 				write_MASTER_CTL(iface,
-					(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
+					read_MASTER_CTL(iface) | STOP);
+			} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
+					iface->cur_msg + 1 < iface->msg_num) {
+				if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
+					write_MASTER_CTL(iface,
+						read_MASTER_CTL(iface) | MDIR);
+				else
+					write_MASTER_CTL(iface,
+						read_MASTER_CTL(iface) & ~MDIR);
+			}
 		}
 	}
 	if (twi_int_status & MERR) {
@@ -193,7 +152,8 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
 		return;
 	}
 	if (twi_int_status & MCOMP) {
-		if ((read_MASTER_CTL(iface) & MEN) == 0 &&
+		if (twi_int_status & (XMTSERV | RCVSERV) &&
+			(read_MASTER_CTL(iface) & MEN) == 0 &&
 			(iface->cur_mode == TWI_I2C_MODE_REPEAT ||
 			iface->cur_mode == TWI_I2C_MODE_COMBINED)) {
 			iface->result = -1;
@@ -221,7 +181,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) & ~RSTART);
 		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
-				iface->cur_msg+1 < iface->msg_num) {
+				iface->cur_msg + 1 < iface->msg_num) {
 			iface->cur_msg++;
 			iface->transPtr = iface->pmsg[iface->cur_msg].buf;
 			iface->writeNum = iface->readNum =
@@ -241,27 +201,29 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
 				}
 			}
 
-			if (iface->pmsg[iface->cur_msg].len <= 255)
-					write_MASTER_CTL(iface,
+			if (iface->pmsg[iface->cur_msg].len <= 255) {
+				write_MASTER_CTL(iface,
 					(read_MASTER_CTL(iface) &
 					(~(0xff << 6))) |
-				(iface->pmsg[iface->cur_msg].len << 6));
-			else {
+					(iface->pmsg[iface->cur_msg].len << 6));
+				iface->manual_stop = 0;
+			} else {
 				write_MASTER_CTL(iface,
 					(read_MASTER_CTL(iface) |
 					(0xff << 6)));
 				iface->manual_stop = 1;
 			}
-			/* remove restart bit and enable master receive */
-			write_MASTER_CTL(iface,
-				read_MASTER_CTL(iface) & ~RSTART);
+			/* remove restart bit before last message */
+			if (iface->cur_msg + 1 == iface->msg_num)
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) & ~RSTART);
 		} else {
 			iface->result = 1;
 			write_INT_MASK(iface, 0);
 			write_MASTER_CTL(iface, 0);
 		}
+		complete(&iface->complete);
 	}
-	complete(&iface->complete);
 }
 
 /* Interrupt handler */
@@ -298,8 +260,8 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
 	if (!(read_CONTROL(iface) & TWI_ENA))
 		return -ENXIO;
 
-	while (read_MASTER_STAT(iface) & BUSBUSY)
-		yield();
+	if (read_MASTER_STAT(iface) & BUSBUSY)
+		return -EAGAIN;
 
 	iface->pmsg = msgs;
 	iface->msg_num = num;
@@ -311,7 +273,8 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
 		return -EINVAL;
 	}
 
-	iface->cur_mode = TWI_I2C_MODE_REPEAT;
+	if (iface->msg_num > 1)
+		iface->cur_mode = TWI_I2C_MODE_REPEAT;
 	iface->manual_stop = 0;
 	iface->transPtr = pmsg->buf;
 	iface->writeNum = iface->readNum = pmsg->len;
@@ -356,6 +319,7 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
 
 	/* Master enable */
 	write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
+		(iface->msg_num > 1 ? RSTART : 0) |
 		((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
 		((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
 	SSYNC();
@@ -398,8 +362,8 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 	if (!(read_CONTROL(iface) & TWI_ENA))
 		return -ENXIO;
 
-	while (read_MASTER_STAT(iface) & BUSBUSY)
-		yield();
+	if (read_MASTER_STAT(iface) & BUSBUSY)
+		return -EAGAIN;
 
 	iface->writeNum = 0;
 	iface->readNum = 0;
@@ -520,7 +484,7 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 		else
 			write_MASTER_CTL(iface, 0x1 << 6);
 		/* Master enable */
-		write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
+		write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | RSTART |
 			((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
 		break;
 	default:
@@ -611,9 +575,9 @@ static struct i2c_algorithm bfin_twi_algorithm = {
 	.functionality = bfin_twi_functionality,
 };
 
-static int i2c_bfin_twi_suspend(struct platform_device *pdev, pm_message_t state)
+static int i2c_bfin_twi_suspend(struct device *dev)
 {
-	struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
+	struct bfin_twi_iface *iface = dev_get_drvdata(dev);
 
 	iface->saved_clkdiv = read_CLKDIV(iface);
 	iface->saved_control = read_CONTROL(iface);
@@ -626,14 +590,14 @@ static int i2c_bfin_twi_suspend(struct platform_device *pdev, pm_message_t state
 	return 0;
 }
 
-static int i2c_bfin_twi_resume(struct platform_device *pdev)
+static int i2c_bfin_twi_resume(struct device *dev)
 {
-	struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
+	struct bfin_twi_iface *iface = dev_get_drvdata(dev);
 
 	int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
-		0, pdev->name, iface);
+		0, to_platform_device(dev)->name, iface);
 	if (rc) {
-		dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
+		dev_err(dev, "Can't get IRQ %d !\n", iface->irq);
 		return -ENODEV;
 	}
 
@@ -646,6 +610,9 @@ static int i2c_bfin_twi_resume(struct platform_device *pdev)
 	return 0;
 }
 
+static SIMPLE_DEV_PM_OPS(i2c_bfin_twi_pm,
+			 i2c_bfin_twi_suspend, i2c_bfin_twi_resume);
+
 static int i2c_bfin_twi_probe(struct platform_device *pdev)
 {
 	struct bfin_twi_iface *iface;
@@ -695,7 +662,8 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	p_adap->timeout = 5 * HZ;
 	p_adap->retries = 3;
 
-	rc = peripheral_request_list(pin_req[pdev->id], "i2c-bfin-twi");
+	rc = peripheral_request_list((unsigned short *)pdev->dev.platform_data,
+					"i2c-bfin-twi");
 	if (rc) {
 		dev_err(&pdev->dev, "Can't setup pin mux!\n");
 		goto out_error_pin_mux;
@@ -742,7 +710,7 @@ out_error_add_adapter:
 	free_irq(iface->irq, iface);
 out_error_req_irq:
 out_error_no_irq:
-	peripheral_free_list(pin_req[pdev->id]);
+	peripheral_free_list((unsigned short *)pdev->dev.platform_data);
 out_error_pin_mux:
 	iounmap(iface->regs_base);
 out_error_ioremap:
@@ -760,7 +728,7 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev)
 
 	i2c_del_adapter(&(iface->adap));
 	free_irq(iface->irq, iface);
-	peripheral_free_list(pin_req[pdev->id]);
+	peripheral_free_list((unsigned short *)pdev->dev.platform_data);
 	iounmap(iface->regs_base);
 	kfree(iface);
 
@@ -770,11 +738,10 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev)
 static struct platform_driver i2c_bfin_twi_driver = {
 	.probe		= i2c_bfin_twi_probe,
 	.remove		= i2c_bfin_twi_remove,
-	.suspend	= i2c_bfin_twi_suspend,
-	.resume		= i2c_bfin_twi_resume,
 	.driver		= {
 		.name	= "i2c-bfin-twi",
 		.owner	= THIS_MODULE,
+		.pm	= &i2c_bfin_twi_pm,
 	},
 };
 
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 370031ac8200..0722f869465c 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -117,10 +117,8 @@ static u16 __initdata i2c_clk_div[50][2] = {
 
 struct imx_i2c_struct {
 	struct i2c_adapter	adapter;
-	struct resource		*res;
 	struct clk		*clk;
 	void __iomem		*base;
-	int			irq;
 	wait_queue_head_t	queue;
 	unsigned long		i2csr;
 	unsigned int 		disable_delay;
@@ -472,9 +470,8 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
 	struct pinctrl *pinctrl;
 	void __iomem *base;
-	resource_size_t res_size;
-	int irq, bitrate;
-	int ret;
+	int irq, ret;
+	u32 bitrate;
 
 	dev_dbg(&pdev->dev, "<%s>\n", __func__);
 
@@ -489,25 +486,15 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	res_size = resource_size(res);
-
-	if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
-		dev_err(&pdev->dev, "request_mem_region failed\n");
+	base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!base)
 		return -EBUSY;
-	}
-
-	base = ioremap(res->start, res_size);
-	if (!base) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -EIO;
-		goto fail1;
-	}
 
-	i2c_imx = kzalloc(sizeof(struct imx_i2c_struct), GFP_KERNEL);
+	i2c_imx = devm_kzalloc(&pdev->dev, sizeof(struct imx_i2c_struct),
+				GFP_KERNEL);
 	if (!i2c_imx) {
 		dev_err(&pdev->dev, "can't allocate interface\n");
-		ret = -ENOMEM;
-		goto fail2;
+		return -ENOMEM;
 	}
 
 	/* Setup i2c_imx driver structure */
@@ -517,29 +504,27 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	i2c_imx->adapter.dev.parent	= &pdev->dev;
 	i2c_imx->adapter.nr 		= pdev->id;
 	i2c_imx->adapter.dev.of_node	= pdev->dev.of_node;
-	i2c_imx->irq			= irq;
 	i2c_imx->base			= base;
-	i2c_imx->res			= res;
 
 	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
 	if (IS_ERR(pinctrl)) {
-		ret = PTR_ERR(pinctrl);
-		goto fail3;
+		dev_err(&pdev->dev, "can't get/select pinctrl\n");
+		return PTR_ERR(pinctrl);
 	}
 
 	/* Get I2C clock */
-	i2c_imx->clk = clk_get(&pdev->dev, "i2c_clk");
+	i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(i2c_imx->clk)) {
-		ret = PTR_ERR(i2c_imx->clk);
 		dev_err(&pdev->dev, "can't get I2C clock\n");
-		goto fail3;
+		return PTR_ERR(i2c_imx->clk);
 	}
 
 	/* Request IRQ */
-	ret = request_irq(i2c_imx->irq, i2c_imx_isr, 0, pdev->name, i2c_imx);
+	ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
+				pdev->name, i2c_imx);
 	if (ret) {
-		dev_err(&pdev->dev, "can't claim irq %d\n", i2c_imx->irq);
-		goto fail4;
+		dev_err(&pdev->dev, "can't claim irq %d\n", irq);
+		return ret;
 	}
 
 	/* Init queue */
@@ -564,7 +549,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "registration failed\n");
-		goto fail5;
+		return ret;
 	}
 
 	of_i2c_register_devices(&i2c_imx->adapter);
@@ -572,28 +557,16 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	/* Set up platform driver data */
 	platform_set_drvdata(pdev, i2c_imx);
 
-	dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", i2c_imx->irq);
+	dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq);
 	dev_dbg(&i2c_imx->adapter.dev, "device resources from 0x%x to 0x%x\n",
-		i2c_imx->res->start, i2c_imx->res->end);
-	dev_dbg(&i2c_imx->adapter.dev, "allocated %d bytes at 0x%x \n",
-		res_size, i2c_imx->res->start);
+		res->start, res->end);
+	dev_dbg(&i2c_imx->adapter.dev, "allocated %d bytes at 0x%x\n",
+		resource_size(res), res->start);
 	dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n",
 		i2c_imx->adapter.name);
 	dev_dbg(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
 
 	return 0;   /* Return OK */
-
-fail5:
-	free_irq(i2c_imx->irq, i2c_imx);
-fail4:
-	clk_put(i2c_imx->clk);
-fail3:
-	kfree(i2c_imx);
-fail2:
-	iounmap(base);
-fail1:
-	release_mem_region(res->start, resource_size(res));
-	return ret; /* Return error number */
 }
 
 static int __exit i2c_imx_remove(struct platform_device *pdev)
@@ -605,20 +578,12 @@ static int __exit i2c_imx_remove(struct platform_device *pdev)
 	i2c_del_adapter(&i2c_imx->adapter);
 	platform_set_drvdata(pdev, NULL);
 
-	/* free interrupt */
-	free_irq(i2c_imx->irq, i2c_imx);
-
 	/* setup chip registers to defaults */
 	writeb(0, i2c_imx->base + IMX_I2C_IADR);
 	writeb(0, i2c_imx->base + IMX_I2C_IFDR);
 	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
 	writeb(0, i2c_imx->base + IMX_I2C_I2SR);
 
-	clk_put(i2c_imx->clk);
-
-	iounmap(i2c_imx->base);
-	release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res));
-	kfree(i2c_imx);
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 4f44a33017b0..2e9d56719e99 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -18,6 +18,11 @@
 #include <linux/mv643xx_i2c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_i2c.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 
 /* Register defines */
 #define	MV64XXX_I2C_REG_SLAVE_ADDR			0x00
@@ -98,6 +103,9 @@ struct mv64xxx_i2c_data {
 	int			rc;
 	u32			freq_m;
 	u32			freq_n;
+#if defined(CONFIG_HAVE_CLK)
+	struct clk              *clk;
+#endif
 	wait_queue_head_t	waitq;
 	spinlock_t		lock;
 	struct i2c_msg		*msg;
@@ -521,6 +529,82 @@ mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
 	drv_data->reg_base_p = 0;
 }
 
+#ifdef CONFIG_OF
+static int __devinit
+mv64xxx_calc_freq(const int tclk, const int n, const int m)
+{
+	return tclk / (10 * (m + 1) * (2 << n));
+}
+
+static bool __devinit
+mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n,
+			  u32 *best_m)
+{
+	int freq, delta, best_delta = INT_MAX;
+	int m, n;
+
+	for (n = 0; n <= 7; n++)
+		for (m = 0; m <= 15; m++) {
+			freq = mv64xxx_calc_freq(tclk, n, m);
+			delta = req_freq - freq;
+			if (delta >= 0 && delta < best_delta) {
+				*best_m = m;
+				*best_n = n;
+				best_delta = delta;
+			}
+			if (best_delta == 0)
+				return true;
+		}
+	if (best_delta == INT_MAX)
+		return false;
+	return true;
+}
+
+static