selftests: mptcp: join: option to execute specific tests

Often, it is needed to run one specific test.

There are options to run subgroups of tests but when only one fails, no
need to run all the subgroup. So far, the solution was to edit the
script to comment the tests that are not needed but that's not ideal.

Now, it is possible to run one specific test by giving the ID of the
tests that are going to be validated, e.g.

  ./mptcp_join.sh 36 37

This is cleaner and saves time.

Technically, the reset* functions now return 0 if the test can be
executed. This naturally creates sections per test in the code which is
also helpful to understand what a test is exactly doing.

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 877 insertions, 752 deletions

diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 65590f965e4d..a3f6c790765b 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -20,6 +20,7 @@ validate_checksum=0
 init=0
 
 declare -A all_tests
+declare -a only_tests
 TEST_COUNT=0
 nr_blank=40
 
@@ -149,8 +150,30 @@ cleanup()
 	cleanup_partial
 }
 
+skip_test()
+{
+	if [ "${#only_tests[@]}" -eq 0 ]; then
+		return 1
+	fi
+
+	local i
+	for i in "${only_tests[@]}"; do
+		if [ "${TEST_COUNT}" -eq "${i}" ]; then
+			return 1
+		fi
+	done
+
+	return 0
+}
+
 reset()
 {
+	TEST_COUNT=$((TEST_COUNT+1))
+
+	if skip_test; then
+		return 1
+	fi
+
 	if [ "${init}" != "1" ]; then
 		init
 	else
@@ -158,11 +181,13 @@ reset()
 	fi
 
 	init_partial
+
+	return 0
 }
 
 reset_with_cookies()
 {
-	reset
+	reset || return 1
 
 	for netns in "$ns1" "$ns2";do
 		ip netns exec $netns sysctl -q net.ipv4.tcp_syncookies=2
@@ -179,7 +204,7 @@ reset_with_add_addr_timeout()
 		tables="ip6tables"
 	fi
 
-	reset
+	reset || return 1
 
 	ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
 	ip netns exec $ns2 $tables -A OUTPUT -p tcp \
@@ -194,7 +219,7 @@ reset_with_checksum()
 	local ns1_enable=$1
 	local ns2_enable=$2
 
-	reset
+	reset || return 1
 
 	ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=$ns1_enable
 	ip netns exec $ns2 sysctl -q net.mptcp.checksum_enabled=$ns2_enable
@@ -207,7 +232,7 @@ reset_with_allow_join_id0()
 	local ns1_enable=$1
 	local ns2_enable=$2
 
-	reset
+	reset || return 1
 
 	ip netns exec $ns1 sysctl -q net.mptcp.allow_join_initial_addr_port=$ns1_enable
 	ip netns exec $ns2 sysctl -q net.mptcp.allow_join_initial_addr_port=$ns2_enable
@@ -520,8 +545,7 @@ do_transfer()
 	speed="$9"
 	sflags="${10}"
 
-	port=$((10000+$TEST_COUNT))
-	TEST_COUNT=$((TEST_COUNT+1))
+	port=$((10000+$TEST_COUNT-1))
 
 	:> "$cout"
 	:> "$sout"
@@ -1381,888 +1405,968 @@ wait_attempt_fail()
 
 subflows_tests()
 {
-	reset
-	run_tests $ns1 $ns2 10.0.1.1
-	chk_join_nr "no JOIN" "0" "0" "0"
+	if reset; then
+		run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr "no JOIN" 0 0 0
+	fi
 
 	# subflow limited by client
-	reset
-	pm_nl_set_limits $ns1 0 0
-	pm_nl_set_limits $ns2 0 0
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1
-	chk_join_nr "single subflow, limited by client" 0 0 0
+	if reset; then
+		pm_nl_set_limits $ns1 0 0
+		pm_nl_set_limits $ns2 0 0
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr "single subflow, limited by client" 0 0 0
+	fi
 
 	# subflow limited by server
-	reset
-	pm_nl_set_limits $ns1 0 0
-	pm_nl_set_limits $ns2 0 1
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1
-	chk_join_nr "single subflow, limited by server" 1 1 0
+	if reset; then
+		pm_nl_set_limits $ns1 0 0
+		pm_nl_set_limits $ns2 0 1
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr "single subflow, limited by server" 1 1 0
+	fi
 
 	# subflow
-	reset
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_set_limits $ns2 0 1
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1
-	chk_join_nr "single subflow" 1 1 1
+	if reset; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_set_limits $ns2 0 1
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr "single subflow" 1 1 1
+	fi
 
 	# multiple subflows
-	reset
-	pm_nl_set_limits $ns1 0 2
-	pm_nl_set_limits $ns2 0 2
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1
-	chk_join_nr "multiple subflows" 2 2 2
+	if reset; then
+		pm_nl_set_limits $ns1 0 2
+		pm_nl_set_limits $ns2 0 2
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr "multiple subflows" 2 2 2
+	fi
 
 	# multiple subflows limited by server
-	reset
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_set_limits $ns2 0 2
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1
-	chk_join_nr "multiple subflows, limited by server" 2 2 1
+	if reset; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_set_limits $ns2 0 2
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr "multiple subflows, limited by server" 2 2 1
+	fi
 
 	# single subflow, dev
-	reset
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_set_limits $ns2 0 1
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow dev ns2eth3
-	run_tests $ns1 $ns2 10.0.1.1
-	chk_join_nr "single subflow, dev" 1 1 1
+	if reset; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_set_limits $ns2 0 1
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow dev ns2eth3
+		run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr "single subflow, dev" 1 1 1
+	fi
 }
 
 subflows_error_tests()
 {
 	# If a single subflow is configured, and matches the MPC src
 	# address, no additional subflow should be created
-	reset
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_set_limits $ns2 0 1
-	pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
-	chk_join_nr "no MPC reuse with single endpoint" 0 0 0
+	if reset; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_set_limits $ns2 0 1
+		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
+		chk_join_nr "no MPC reuse with single endpoint" 0 0 0
+	fi
 
 	# multiple subflows, with subflow creation error
-	reset
-	pm_nl_set_limits $ns1 0 2
-	pm_nl_set_limits $ns2 0 2
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
-	ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j REJECT
-	run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
-	chk_join_nr "multi subflows, with failing subflow" 1 1 1
+	if reset; then
+		pm_nl_set_limits $ns1 0 2
+		pm_nl_set_limits $ns2 0 2
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
+		ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j REJECT
+		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
+		chk_join_nr "multi subflows, with failing subflow" 1 1 1
+	fi
 
 	# multiple subflows, with subflow timeout on MPJ
-	reset
-	pm_nl_set_limits $ns1 0 2
-	pm_nl_set_limits $ns2 0 2
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
-	ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j DROP
-	run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
-	chk_join_nr "multi subflows, with subflow timeout" 1 1 1
+	if reset; then
+		pm_nl_set_limits $ns1 0 2
+		pm_nl_set_limits $ns2 0 2
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
+		ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j DROP
+		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
+		chk_join_nr "multi subflows, with subflow timeout" 1 1 1
+	fi
 
 	# multiple subflows, check that the endpoint corresponding to
 	# closed subflow (due to reset) is not reused if additional
 	# subflows are added later
-	reset
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_set_limits $ns2 0 1
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j REJECT
-	run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow &
-
-	# updates in the child shell do not have any effect here, we
-	# need to bump the test counter for the above case
-	TEST_COUNT=$((TEST_COUNT+1))
-
-	# mpj subflow will be in TW after the reset
-	wait_attempt_fail $ns2
-	pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
-	wait
-
-	# additional subflow could be created only if the PM select
-	# the later endpoint, skipping the already used one
-	chk_join_nr "multi subflows, fair usage on close" 1 1 1
+	if reset; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_set_limits $ns2 0 1
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j REJECT
+		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow &
+
+		# mpj subflow will be in TW after the reset
+		wait_attempt_fail $ns2
+		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
+		wait
+
+		# additional subflow could be created only if the PM select
+		# the later endpoint, skipping the already used one
+		chk_join_nr "multi subflows, fair usage on close" 1 1 1
+	fi
 }
 
 signal_address_tests()
 {
 	# add_address, unused
-	reset
-	pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-	run_tests $ns1 $ns2 10.0.1.1
-	chk_join_nr "unused signal address" 0 0 0
-	chk_add_nr 1 1
+	if reset; then
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr "unused signal address" 0 0 0
+		chk_add_nr 1 1
+	fi
 
 	# accept and use add_addr
-	reset
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_set_limits $ns2 1 1
-	pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-	run_tests $ns1 $ns2 10.0.1.1
-	chk_join_nr "signal address" 1 1 1
-	chk_add_nr 1 1
+	if reset; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_set_limits $ns2 1 1
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr "signal address" 1 1 1
+		chk_add_nr 1 1
+	fi
 
 	# accept and use add_addr with an additional subflow
 	# note: signal address in server ns and local addresses in client ns must
 	# belong to different subnets or one of the listed local address could be
 	# used for 'add_addr' subflow
-	reset
-	pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-	pm_nl_set_limits $ns1 0 2
-	pm_nl_set_limits $ns2 1 2
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1
-	chk_join_nr "subflow and signal" 2 2 2
-	chk_add_nr 1 1
+	if reset; then
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		pm_nl_set_limits $ns1 0 2
+		pm_nl_set_limits $ns2 1 2
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr "subflow and signal" 2 2 2
+		chk_add_nr 1 1
+	fi
 
 	# accept and use add_addr with additional subflows
-	reset
-	pm_nl_set_limits $ns1 0 3
-	pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-	pm_nl_set_limits $ns2 1 3
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1
-	chk_join_nr "multiple subflows and signal" 3 3 3
-	chk_add_nr 1 1
+	if reset; then
+		pm_nl_set_limits $ns1 0 3
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		pm_nl_set_limits $ns2 1 3
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr "multiple subflows and signal" 3 3 3
+		chk_add_nr 1 1
+	fi
 
 	# signal addresses
-	reset
-	pm_nl_set_limits $ns1 3 3
-	pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-	pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
-	pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
-	pm_nl_set_limits $ns2 3 3
-	run_tests $ns1 $ns2 10.0.1.1
-	chk_join_nr "signal addresses" 3 3 3
-	chk_add_nr 3 3
+	if reset; then
+		pm_nl_set_limits $ns1 3 3
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
+		pm_nl_set_limits $ns2 3 3
+		run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr "signal addresses" 3 3 3
+		chk_add_nr 3 3
+	fi
 
 	# signal invalid addresses
-	reset
-	pm_nl_set_limits $ns1 3 3
-	pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
-	pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
-	pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
-	pm_nl_set_limits $ns2 3 3
-	run_tests $ns1 $ns2 10.0.1.1
-	chk_join_nr "signal invalid addresses" 1 1 1
-	chk_add_nr 3 3
+	if reset; then
+		pm_nl_set_limits $ns1 3 3
+		pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
+		pm_nl_set_limits $ns2 3 3
+		run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr "signal invalid addresses" 1 1 1
+		chk_add_nr 3 3
+	fi
 
 	# signal addresses race test
-	reset
-	pm_nl_set_limits $ns1 4 4
-	pm_nl_set_limits $ns2 4 4
-	pm_nl_add_endpoint $ns1 10.0.1.1 flags signal
-	pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-	pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
-	pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
-	pm_nl_add_endpoint $ns2 10.0.1.2 flags signal
-	pm_nl_add_endpoint $ns2 10.0.2.2 flags signal
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags signal
-	pm_nl_add_endpoint $ns2 10.0.4.2 flags signal
-
-	# the peer could possibly miss some addr notification, allow retransmission
-	ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
-	run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
-	chk_join_nr "signal addresses race test" 3 3 3
-
-	# the server will not signal the address terminating
-	# the MPC subflow
-	chk_add_nr 3 3
+	if reset; then
+		pm_nl_set_limits $ns1 4 4
+		pm_nl_set_limits $ns2 4 4
+		pm_nl_add_endpoint $ns1 10.0.1.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
+		pm_nl_add_endpoint $ns2 10.0.1.2 flags signal
+		pm_nl_add_endpoint $ns2 10.0.2.2 flags signal
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags signal
+		pm_nl_add_endpoint $ns2 10.0.4.2 flags signal
+
+		# the peer could possibly miss some addr notification, allow retransmission
+		ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
+		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
+		chk_join_nr "signal addresses race test" 3 3 3
+
+		# the server will not signal the address terminating
+		# the MPC subflow
+		chk_add_nr 3 3
+	fi
 }
 
 link_failure_tests()
 {
 	# accept and use add_addr with additional subflows and link loss
-	reset
-
-	# without any b/w limit each veth could spool the packets and get
-	# them acked at xmit time, so that the corresponding subflow will
-	# have almost always no outstanding pkts, the scheduler will pick
-	# always the first subflow and we will have hard time testing
-	# active backup and link switch-over.
-	# Let's set some arbitrary (low) virtual link limits.
-	init_shapers
-	pm_nl_set_limits $ns1 0 3
-	pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
-	pm_nl_set_limits $ns2 1 3
-	pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow
-	pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1 1
-	chk_join_nr "multiple flows, signal, link failure" 3 3 3
-	chk_add_nr 1 1
-	chk_stale_nr $ns2 1 5 1
+	if reset; then
+		# without any b/w limit each veth could spool the packets and get
+		# them acked at xmit time, so that the corresponding subflow will
+		# have almost always no outstanding pkts, the scheduler will pick
+		# always the first subflow and we will have hard time testing
+		# active backup and link switch-over.
+		# Let's set some arbitrary (low) virtual link limits.
+		init_shapers
+		pm_nl_set_limits $ns1 0 3
+		pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
+		pm_nl_set_limits $ns2 1 3
+		pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1 1
+		chk_join_nr "multiple flows, signal, link failure" 3 3 3
+		chk_add_nr 1 1
+		chk_stale_nr $ns2 1 5 1
+	fi
 
 	# accept and use add_addr with additional subflows and link loss
 	# for bidirectional transfer
-	reset
-	init_shapers
-	pm_nl_set_limits $ns1 0 3
-	pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
-	pm_nl_set_limits $ns2 1 3
-	pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow
-	pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1 2
-	chk_join_nr "multi flows, signal, bidi, link fail" 3 3 3
-	chk_add_nr 1 1
-	chk_stale_nr $ns2 1 -1 1
+	if reset; then
+		init_shapers
+		pm_nl_set_limits $ns1 0 3
+		pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
+		pm_nl_set_limits $ns2 1 3
+		pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1 2
+		chk_join_nr "multi flows, signal, bidi, link fail" 3 3 3
+		chk_add_nr 1 1
+		chk_stale_nr $ns2 1 -1 1
+	fi
 
 	# 2 subflows plus 1 backup subflow with a lossy link, backup
 	# will never be used
-	reset
-	init_shapers
-	pm_nl_set_limits $ns1 0 2
-	pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
-	pm_nl_set_limits $ns2 1 2
-	FAILING_LINKS="1"
-	pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
-	run_tests $ns1 $ns2 10.0.1.1 1
-	chk_join_nr "backup subflow unused, link failure" 2 2 2
-	chk_add_nr 1 1
-	chk_link_usage $ns2 ns2eth3 $cinsent 0
+	if reset; then
+		init_shapers
+		pm_nl_set_limits $ns1 0 2
+		pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
+		pm_nl_set_limits $ns2 1 2
+		FAILING_LINKS="1"
+		pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
+		run_tests $ns1 $ns2 10.0.1.1 1
+		chk_join_nr "backup subflow unused, link failure" 2 2 2
+		chk_add_nr 1 1
+		chk_link_usage $ns2 ns2eth3 $cinsent 0
+	fi
 
 	# 2 lossy links after half transfer, backup will get half of
 	# the traffic
-	reset
-	init_shapers
-	pm_nl_set_limits $ns1 0 2
-	pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
-	pm_nl_set_limits $ns2 1 2
-	pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
-	FAILING_LINKS="1 2"
-	run_tests $ns1 $ns2 10.0.1.1 1
-	chk_join_nr "backup flow used, multi links fail" 2 2 2
-	chk_add_nr 1 1
-	chk_stale_nr $ns2 2 4 2
-	chk_link_usage $ns2 ns2eth3 $cinsent 50
+	if reset; then
+		init_shapers
+		pm_nl_set_limits $ns1 0 2
+		pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
+		pm_nl_set_limits $ns2 1 2
+		pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
+		FAILING_LINKS="1 2"
+		run_tests $ns1 $ns2 10.0.1.1 1
+		chk_join_nr "backup flow used, multi links fail" 2 2 2
+		chk_add_nr 1 1
+		chk_stale_nr $ns2 2 4 2
+		chk_link_usage $ns2 ns2eth3 $cinsent 50
+	fi
 
 	# use a backup subflow with the first subflow on a lossy link
 	# for bidirectional transfer
-	reset
-	init_shapers
-	pm_nl_set_limits $ns1 0 2
-	pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
-	pm_nl_set_limits $ns2 1 3
-	pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
-	FAILING_LINKS="1 2"
-	run_tests $ns1 $ns2 10.0.1.1 2
-	chk_join_nr "backup flow used, bidi, link failure" 2 2 2
-	chk_add_nr 1 1
-	chk_stale_nr $ns2 1 -1 2
-	chk_link_usage $ns2 ns2eth3 $cinsent 50
+	if reset; then
+		init_shapers
+		pm_nl_set_limits $ns1 0 2
+		pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
+		pm_nl_set_limits $ns2 1 3
+		pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
+		FAILING_LINKS="1 2"
+		run_tests $ns1 $ns2 10.0.1.1 2
+		chk_join_nr "backup flow used, bidi, link failure" 2 2 2
+		chk_add_nr 1 1
+		chk_stale_nr $ns2 1 -1 2
+		chk_link_usage $ns2 ns2eth3 $cinsent 50
+	fi
 }
 
 add_addr_timeout_tests()
 {
 	# add_addr timeout
-	reset_with_add_addr_timeout
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_set_limits $ns2 1 1
-	pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-	run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
-	chk_join_nr "signal address, ADD_ADDR timeout" 1 1 1
-	chk_add_nr 4 0
+	if reset_with_add_addr_timeout; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_set_limits $ns2 1 1
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
+		chk_join_nr "signal address, ADD_ADDR timeout" 1 1 1
+		chk_add_nr 4 0
+	fi
 
 	# add_addr timeout IPv6
-	reset_with_add_addr_timeout 6
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_set_limits $ns2 1 1
-	pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
-	run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
-	chk_join_nr "signal address, ADD_ADDR6 timeout" 1 1 1
-	chk_add_nr 4 0
+	if reset_with_add_addr_timeout 6; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_set_limits $ns2 1 1
+		pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
+		run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
+		chk_join_nr "signal address, ADD_ADDR6 timeout" 1 1 1
+		chk_add_nr 4 0
+	fi
 
 	# signal addresses timeout
-	reset_with_add_addr_timeout
-	pm_nl_set_limits $ns1 2 2
-	pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-	pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
-	pm_nl_set_limits $ns2 2 2
-	run_tests $ns1 $ns2 10.0.1.1 0 0 0 speed_10
-	chk_join_nr "signal addresses, ADD_ADDR timeout" 2 2 2
-	chk_add_nr 8 0
+	if reset_with_add_addr_timeout; then
+		pm_nl_set_limits $ns1 2 2
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+		pm_nl_set_limits $ns2 2 2
+		run_tests $ns1 $ns2 10.0.1.1 0 0 0 speed_10
+		chk_join_nr "signal addresses, ADD_ADDR timeout" 2 2 2
+		chk_add_nr 8 0
+	fi
 
 	# signal invalid addresses timeout
-	reset_with_add_addr_timeout
-	pm_nl_set_limits $ns1 2 2
-	pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
-	pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
-	pm_nl_set_limits $ns2 2 2
-	run_tests $ns1 $ns2 10.0.1.1 0 0 0 speed_10
-	chk_join_nr "invalid address, ADD_ADDR timeout" 1 1 1
-	chk_add_nr 8 0
+	if reset_with_add_addr_timeout; then
+		pm_nl_set_limits $ns1 2 2
+		pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+		pm_nl_set_limits $ns2 2 2
+		run_tests $ns1 $ns2 10.0.1.1 0 0 0 speed_10
+		chk_join_nr "invalid address, ADD_ADDR timeout" 1 1 1
+		chk_add_nr 8 0
+	fi
 }
 
 remove_tests()
 {
 	# single subflow, remove
-	reset
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_set_limits $ns2 0 1
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow
-	chk_join_nr "remove single subflow" 1 1 1
-	chk_rm_nr 1 1
+	if reset; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_set_limits $ns2 0 1
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow
+		chk_join_nr "remove single subflow" 1 1 1
+		chk_rm_nr 1 1
+	fi
 
 	# multiple subflows, remove
-	reset
-	pm_nl_set_limits $ns1 0 2
-	pm_nl_set_limits $ns2 0 2
-	pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1 0 0 -2 slow
-	chk_join_nr "remove multiple subflows" 2 2 2
-	chk_rm_nr 2 2
+	if reset; then
+		pm_nl_set_limits $ns1 0 2
+		pm_nl_set_limits $ns2 0 2
+		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1 0 0 -2 slow
+		chk_join_nr "remove multiple subflows" 2 2 2
+		chk_rm_nr 2 2
+	fi
 
 	# single address, remove
-	reset
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-	pm_nl_set_limits $ns2 1 1
-	run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
-	chk_join_nr "remove single address" 1 1 1
-	chk_add_nr 1 1
-	chk_rm_nr 1 1 invert
+	if reset; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		pm_nl_set_limits $ns2 1 1
+		run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
+		chk_join_nr "remove single address" 1 1 1
+		chk_add_nr 1 1
+		chk_rm_nr 1 1 invert
+	fi
 
 	# subflow and signal, remove
-	reset
-	pm_nl_set_limits $ns1 0 2
-	pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-	pm_nl_set_limits $ns2 1 2
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
-	chk_join_nr "remove subflow and signal" 2 2 2
-	chk_add_nr 1 1
-	chk_rm_nr 1 1
+	if reset; then
+		pm_nl_set_limits $ns1 0 2
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		pm_nl_set_limits $ns2 1 2
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
+		chk_join_nr "remove subflow and signal" 2 2 2
+		chk_add_nr 1 1
+		chk_rm_nr 1 1
+	fi
 
 	# subflows and signal, remove
-	reset
-	pm_nl_set_limits $ns1 0 3
-	pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-	pm_nl_set_limits $ns2 1 3
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1 0 -1 -2 slow
-	chk_join_nr "remove subflows and signal" 3 3 3
-	chk_add_nr 1 1
-	chk_rm_nr 2 2
+	if reset; then
+		pm_nl_set_limits $ns1 0 3
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		pm_nl_set_limits $ns2 1 3
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1 0 -1 -2 slow
+		chk_join_nr "remove subflows and signal" 3 3 3
+		chk_add_nr 1 1
+		chk_rm_nr 2 2
+	fi
 
 	# addresses remove
-	reset
-	pm_nl_set_limits $ns1 3 3
-	pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
-	pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
-	pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
-	pm_nl_set_limits $ns2 3 3
-	run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow
-	chk_join_nr "remove addresses" 3 3 3
-	chk_add_nr 3 3
-	chk_rm_nr 3 3 invert
+	if reset; then
+		pm_nl_set_limits $ns1 3 3
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
+		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
+		pm_nl_set_limits $ns2 3 3
+		run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow
+		chk_join_nr "remove addresses" 3 3 3
+		chk_add_nr 3 3
+		chk_rm_nr 3 3 invert
+	fi
 
 	# invalid addresses remove
-	reset
-	pm_nl_set_limits $ns1 3 3
-	pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
-	pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
-	pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
-	pm_nl_set_limits $ns2 3 3
-	run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow
-	chk_join_nr "remove invalid addresses" 1 1 1
-	chk_add_nr 3 3
-	chk_rm_nr 3 1 invert
+	if reset; then
+		pm_nl_set_limits $ns1 3 3
+		pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
+		pm_nl_set_limits $ns2 3 3
+		run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow
+		chk_join_nr "remove invalid addresses" 1 1 1
+		chk_add_nr 3 3
+		chk_rm_nr 3 1 invert
+	fi
 
 	# subflows and signal, flush
-	reset
-	pm_nl_set_limits $ns1 0 3
-	pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-	pm_nl_set_limits $ns2 1 3
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
-	chk_join_nr "flush subflows and signal" 3 3 3
-	chk_add_nr 1 1
-	chk_rm_nr 1 3 invert simult
+	if reset; then
+		pm_nl_set_limits $ns1 0 3
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		pm_nl_set_limits $ns2 1 3
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
+		chk_join_nr "flush subflows and signal" 3 3 3
+		chk_add_nr 1 1
+		chk_rm_nr 1 3 invert simult
+	fi
 
 	# subflows flush
-	reset
-	pm_nl_set_limits $ns1 3 3
-	pm_nl_set_limits $ns2 3 3
-	pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
-	chk_join_nr "flush subflows" 3 3 3
-	chk_rm_nr 0 3 simult
+	if reset; then
+		pm_nl_set_limits $ns1 3 3
+		pm_nl_set_limits $ns2 3 3
+		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
+		chk_join_nr "flush subflows" 3 3 3
+		chk_rm_nr 0 3 simult
+	fi
 
 	# addresses flush
-	reset
-	pm_nl_set_limits $ns1 3 3
-	pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
-	pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
-	pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
-	pm_nl_set_limits $ns2 3 3
-	run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
-	chk_join_nr "flush addresses" 3 3 3
-	chk_add_nr 3 3
-	chk_rm_nr 3 3 invert simult
+	if reset; then
+		pm_nl_set_limits $ns1 3 3
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
+		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
+		pm_nl_set_limits $ns2 3 3
+		run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
+		chk_join_nr "flush addresses" 3 3 3
+		chk_add_nr 3 3
+		chk_rm_nr 3 3 invert simult
+	fi
 
 	# invalid addresses flush
-	reset
-	pm_nl_set_limits $ns1 3 3
-	pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
-	pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
-	pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
-	pm_nl_set_limits $ns2 3 3
-	run_tests $ns1 $ns2 10.0.1.1 0 -8 0 slow
-	chk_join_nr "flush invalid addresses" 1 1 1
-	chk_add_nr 3 3
-	chk_rm_nr 3 1 invert
+	if reset; then
+		pm_nl_set_limits $ns1 3 3
+		pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+		pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
+		pm_nl_set_limits $ns2 3 3
+		run_tests $ns1 $ns2 10.0.1.1 0 -8 0 slow
+		chk_join_nr "flush invalid addresses" 1 1 1
+		chk_add_nr 3 3
+		chk_rm_nr 3 1 invert
+	fi
 
 	# remove id 0 subflow
-	reset
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_set_limits $ns2 0 1
-	pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-	run_tests $ns1 $ns2 10.0.1.1 0 0 -9 slow
-	chk_join_nr "remove id 0 subflow" 1 1 1
-	chk_rm_nr 1 1
+	if reset; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_set_limits $ns2 0 1
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+		run_tests $ns1 $ns2 10.0.1.1 0 0 -9 slow
+		chk_join_nr "remove id 0 subflow" 1 1 1
+		chk_rm_nr 1 1
+	fi
 
 	# remove id 0 address
-	reset
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-	pm_nl_set_limits $ns2 1 1
-	run_tests $ns1 $ns2 10.0.1.1 0 -9 0 slow
-	chk_join_nr "remove id 0 address" 1 1 1
-	chk_add_nr 1 1
-	chk_rm_nr 1 1 invert
+	if reset; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		pm_nl_set_limits $ns2 1 1
+		run_tests $ns1 $ns2 10.0.1.1 0 -9 0 slow
+		chk_join_nr "remove id 0 address" 1 1 1
+		chk_add_nr 1 1
+		chk_rm_nr 1 1 invert
+	fi
 }
 
 add_tests()
 {
 	# add single subflow
-	reset
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_set_limits $ns2 0 1
-	run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow
-	chk_join_nr "add single subflow" 1 1 1
+	if reset; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_set_limits $ns2 0 1
+		run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow
+		chk_join_nr "add single subflow" 1 1 1
+	fi
 
 	# add signal address
-	reset
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_set_limits $ns2 1 1
-	run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow
-	chk_join_nr "add signal address" 1 1 1
-	chk_add_nr 1 1
+	if reset; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_set_limits $ns2 1 1
+		run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow
+		chk_join_nr "add signal address" 1 1 1
+		chk_add_nr 1 1
+	fi
 
 	# add multiple subflows
-	reset
-	pm_nl_set_limits $ns1 0 2
-	pm_nl_set_limits $ns2 0 2
-	run_tests $ns1 $ns2 10.0.1.1 0 0 2 slow
-	chk_join_nr "add multiple subflows" 2 2 2
+	if reset; then
+		pm_nl_set_limits $ns1 0 2
+		pm_nl_set_limits $ns2 0 2
+		run_tests $ns1 $ns2 10.0.1.1 0 0 2 slow
+		chk_join_nr "add multiple subflows" 2 2 2
+	fi
 
 	# add multiple subflows IPv6
-	reset
-	pm_nl_set_limits $ns1 0 2
-	pm_nl_set_limits $ns2 0 2
-	run_tests $ns1 $ns2 dead:beef:1::1 0 0 2 slow
-	chk_join_nr "add multiple subflows IPv6" 2 2 2
+	if reset; then
+		pm_nl_set_limits $ns1 0 2
+		pm_nl_set_limits $ns2 0 2
+		run_tests $ns1 $ns2 dead:beef:1::1 0 0 2 slow
+		chk_join_nr "add multiple subflows IPv6" 2 2 2
+	fi
 
 	# add multiple addresses IPv6
-	reset
-	pm_nl_set_limits $ns1 0 2
-	pm_nl_set_limits $ns2 2 2
-	run_tests $ns1 $ns2 dead:beef:1::1 0 2 0 slow
-	chk_join_nr "add multiple addresses IPv6" 2 2 2
-	chk_add_nr 2 2
+	if reset; then
+		pm_nl_set_limits $ns1 0 2
+		pm_nl_set_limits $ns2 2 2
+		run_tests $ns1 $ns2 dead:beef:1::1 0 2 0 slow
+		chk_join_nr "add multiple addresses IPv6" 2 2 2
+		chk_add_nr 2 2
+	fi
 }
 
 ipv6_tests()
 {
 	# subflow IPv6
-	reset
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_set_limits $ns2 0 1
-	pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow
-	run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
-	chk_join_nr "single subflow IPv6" 1 1 1
+	if reset; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_set_limits $ns2 0 1
+		pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow
+		run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
+		chk_join_nr "single subflow IPv6" 1 1 1
+	fi
 
 	# add_address, unused IPv6
-	reset
-	pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
-	run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
-	chk_join_nr "unused signal address IPv6" 0 0 0
-	chk_add_nr 1 1
+	if reset; then
+		pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
+		run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
+		chk_join_nr "unused signal address IPv6" 0 0 0
+		chk_add_nr 1 1
+	fi
 
 	# signal address IPv6
-	reset
-	pm_nl_set_limits $ns1 0 1
-	pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
-	pm_nl_set_limits $ns2 1 1
-	run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
-	chk_join_nr "single address IPv6" 1 1 1
-	chk_add_nr 1 1
+	if reset; then
+		pm_nl_set_limits $ns1 0 1
+		pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
+		pm_nl_set_limits $ns2 1 1
+		run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow