ARM: at91: remove at91sam9rl legacy board support

Remove legacy support for at91sam9rl boards.
This include board files removal plus all legacy code for non DT boards
support.
Use the Device Tree for running this board with newer kernels.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: Add sentence about DT]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

6 files changed, 0 insertions, 2079 deletions

diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig
deleted file mode 100644
index 4c26d344ae88..000000000000
--- a/arch/arm/configs/at91sam9rl_defconfig
+++ /dev/null
@@ -1,92 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9RL=y
-CONFIG_MACH_AT91SAM9RLEK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=24576
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ATMEL_USBA=y
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_IIO=y
-CONFIG_AT91_ADC=y
-CONFIG_PWM=y
-CONFIG_PWM_ATMEL=y
-CONFIG_EXT4_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index b86dd9923d58..22963a829e5c 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -33,12 +33,6 @@ config ARCH_AT91SAM9263
 	select AT91_USE_OLD_CLK
 	select OLD_IRQ_AT91
 
-config ARCH_AT91SAM9RL
-	bool "AT91SAM9RL"
-	select SOC_AT91SAM9RL
-	select AT91_USE_OLD_CLK
-	select OLD_IRQ_AT91
-
 endchoice
 
 config ARCH_AT91SAM9G20
@@ -281,19 +275,6 @@ endif
 
 # ----------------------------------------------------------
 
-if ARCH_AT91SAM9RL
-
-comment "AT91SAM9RL Board Type"
-
-config MACH_AT91SAM9RLEK
-	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
-	help
-	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-
-endif
-
-# ----------------------------------------------------------
-
 comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 37a35b048893..df48363d7384 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl_devices.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
@@ -56,9 +55,6 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
 
-# AT91SAM9RL board-specific support
-obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
-
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
 obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index f553e4ea034b..6ca7fc5ca812 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -9,284 +9,13 @@
  * more details.
  */
 
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk/at91_pmc.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 #include <asm/system_misc.h>
 #include <mach/cpu.h>
 #include <mach/at91_dbgu.h>
-#include <mach/at91sam9rl.h>
 #include <mach/hardware.h>
 
-#include "at91_aic.h"
 #include "soc.h"
 #include "generic.h"
-#include "sam9_smc.h"
-#include "pm.h"
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-#if defined(CONFIG_OLD_CLK_AT91)
-#include "clock.h"
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
-	.name		= "pioC_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioD_clk = {
-	.name		= "pioD_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOD,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
-	.name		= "usart3_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_US3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
-	.name		= "mci_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_MCI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi0_clk = {
-	.name		= "twi0_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_TWI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi1_clk = {
-	.name		= "twi1_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_TWI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi_clk = {
-	.name		= "spi_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_SPI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
-	.name		= "ssc0_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_SSC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
-	.name		= "ssc1_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_SSC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc0_clk = {
-	.name		= "tc0_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_TC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc1_clk = {
-	.name		= "tc1_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_TC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc2_clk = {
-	.name		= "tc2_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_TC2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
-	.name		= "pwm_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_PWMC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tsc_clk = {
-	.name		= "tsc_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_TSC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
-	.name		= "dma_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_DMA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
-	.name		= "udphs_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_UDPHS,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
-	.name		= "lcdc_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_LCDC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ac97_clk = {
-	.name		= "ac97_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_AC97C,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_op_clk = {
-	.name		= "adc_op_clk",
-	.type		= CLK_TYPE_PERIPHERAL,
-	.rate_hz	= 1000000,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioA_clk,
-	&pioB_clk,
-	&pioC_clk,
-	&pioD_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&usart3_clk,
-	&mmc_clk,
-	&twi0_clk,
-	&twi1_clk,
-	&spi_clk,
-	&ssc0_clk,
-	&ssc1_clk,
-	&tc0_clk,
-	&tc1_clk,
-	&tc2_clk,
-	&pwm_clk,
-	&tsc_clk,
-	&dma_clk,
-	&udphs_clk,
-	&lcdc_clk,
-	&ac97_clk,
-	&adc_op_clk,
-	// irq0
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("hclk", "at91sam9rl-lcdfb.0", &lcdc_clk),
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
-	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
-	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
-	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("pclk", "fffc0000.ssc", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc1_clk),
-	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi0_clk),
-	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.1", &twi1_clk),
-	CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk),
-	CLKDEV_CON_ID("pioA", &pioA_clk),
-	CLKDEV_CON_ID("pioB", &pioB_clk),
-	CLKDEV_CON_ID("pioC", &pioC_clk),
-	CLKDEV_CON_ID("pioD", &pioD_clk),
-	/* more lookup table for DT entries */
-	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
-	CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "ffffb800.serial", &usart2_clk),
-	CLKDEV_CON_DEV_ID("usart", "ffffbc00.serial", &usart3_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
-	CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
-	CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "fffa4000.mmc", &mmc_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffa8000.i2c", &twi0_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi1_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffc8000.pwm", &pwm_clk),
-	CLKDEV_CON_DEV_ID(NULL, "ffffc800.pwm", &pwm_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
-	CLKDEV_CON_ID("adc_clk", &tsc_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
-};
-
-/*
- * The two programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-
-static void __init at91sam9rl_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clkdev_add_table(periph_clocks_lookups,
-			 ARRAY_SIZE(periph_clocks_lookups));
-	clkdev_add_table(usart_clocks_lookups,
-			 ARRAY_SIZE(usart_clocks_lookups));
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-}
-#endif
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9rl_gpio[] __initdata = {
-	{
-		.id		= AT91SAM9RL_ID_PIOA,
-		.regbase	= AT91SAM9RL_BASE_PIOA,
-	}, {
-		.id		= AT91SAM9RL_ID_PIOB,
-		.regbase	= AT91SAM9RL_BASE_PIOB,
-	}, {
-		.id		= AT91SAM9RL_ID_PIOC,
-		.regbase	= AT91SAM9RL_BASE_PIOC,
-	}, {
-		.id		= AT91SAM9RL_ID_PIOD,
-		.regbase	= AT91SAM9RL_BASE_PIOD,
-	}
-};
 
 /* --------------------------------------------------------------------
  *  AT91SAM9RL processor initialization
@@ -309,107 +38,14 @@ static void __init at91sam9rl_map_io(void)
 	at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size);
 }
 
-static void __init at91sam9rl_ioremap_registers(void)
-{
-	at91_ioremap_ramc(0, AT91SAM9RL_BASE_SDRAMC, 512);
-	at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
-	at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
-	at91_ioremap_matrix(AT91SAM9RL_BASE_MATRIX);
-	at91_pm_set_standby(at91sam9_sdram_standby);
-}
-
 static void __init at91sam9rl_initialize(void)
 {
 	arm_pm_idle = at91sam9_idle;
 
 	at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC);
 	at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT);
-
-	/* Register GPIO subsystem */
-	at91_gpio_init(at91sam9rl_gpio, 4);
-}
-
-static struct resource rstc_resources[] = {
-	[0] = {
-		.start  = AT91SAM9RL_BASE_RSTC,
-		.end    = AT91SAM9RL_BASE_RSTC + SZ_16 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = AT91SAM9RL_BASE_SDRAMC,
-		.end    = AT91SAM9RL_BASE_SDRAMC + SZ_512 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device rstc_device = {
-	.name           = "at91-sam9260-reset",
-	.resource       = rstc_resources,
-	.num_resources  = ARRAY_SIZE(rstc_resources),
-};
-
-static struct resource shdwc_resources[] = {
-	[0] = {
-		.start  = AT91SAM9RL_BASE_SHDWC,
-		.end    = AT91SAM9RL_BASE_SHDWC + SZ_16 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device shdwc_device = {
-	.name           = "at91-poweroff",
-	.resource       = shdwc_resources,
-	.num_resources  = ARRAY_SIZE(shdwc_resources),
-};
-
-static void __init at91sam9rl_register_devices(void)
-{
-	platform_device_register(&rstc_device);
-	platform_device_register(&shdwc_device);
 }
 
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller */
-	7,	/* System Peripherals */
-	1,	/* Parallel IO Controller A */
-	1,	/* Parallel IO Controller B */
-	1,	/* Parallel IO Controller C */
-	1,	/* Parallel IO Controller D */
-	5,	/* USART 0 */
-	5,	/* USART 1 */
-	5,	/* USART 2 */
-	5,	/* USART 3 */
-	0,	/* Multimedia Card Interface */
-	6,	/* Two-Wire Interface 0 */
-	6,	/* Two-Wire Interface 1 */
-	5,	/* Serial Peripheral Interface */
-	4,	/* Serial Synchronous Controller 0 */
-	4,	/* Serial Synchronous Controller 1 */
-	0,	/* Timer Counter 0 */
-	0,	/* Timer Counter 1 */
-	0,	/* Timer Counter 2 */
-	0,
-	0,	/* Touch Screen Controller */
-	0,	/* DMA Controller */
-	2,	/* USB Device High speed port */
-	2,	/* LCD Controller */
-	6,	/* AC97 Controller */
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,	/* Advanced Interrupt Controller */
-};
-
 static void __init at91sam9rl_init_time(void)
 {
 	at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
@@ -417,13 +53,6 @@ static void __init at91sam9rl_init_time(void)
 
 AT91_SOC_START(at91sam9rl)
 	.map_io = at91sam9rl_map_io,
-	.default_irq_priority = at91sam9rl_default_irq_priority,
-	.extern_irq = (1 << AT91SAM9RL_ID_IRQ0),
-	.ioremap_registers = at91sam9rl_ioremap_registers,
-#if defined(CONFIG_OLD_CLK_AT91)
-	.register_clocks = at91sam9rl_register_clocks,
-#endif
-	.register_devices = at91sam9rl_register_devices,
 	.init = at91sam9rl_initialize,
 	.init_time = at91sam9rl_init_time,
 AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
deleted file mode 100644
index 37d1c9ed4562..000000000000
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ /dev/null
@@ -1,1260 +0,0 @@
-/*
- *  Copyright (C) 2007 Atmel Corporation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <linux/fb.h>
-#include <video/atmel_lcdc.h>
-
-#include <mach/at91sam9rl.h>
-#include <mach/at91sam9rl_matrix.h>
-#include <mach/at91_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/hardware.h>
-#include <linux/platform_data/dma-atmel.h>
-#include <linux/platform_data/at91_adc.h>
-
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-/* --------------------------------------------------------------------
- *  HDMAC - AHB DMA Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
-static u64 hdmac_dmamask = DMA_BIT_MASK(32);
-
-static struct resource hdmac_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_DMA,
-		.end	= AT91SAM9RL_BASE_DMA + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA,
-		.end	= NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at_hdmac_device = {
-	.name		= "at91sam9rl_dma",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &hdmac_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= hdmac_resources,
-	.num_resources	= ARRAY_SIZE(hdmac_resources),
-};
-
-void __init at91_add_device_hdmac(void)
-{
-	platform_device_register(&at_hdmac_device);
-}
-#else
-void __init at91_add_device_hdmac(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  USB HS Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
-
-static struct resource usba_udc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_UDPHS_FIFO,
-		.end	= AT91SAM9RL_UDPHS_FIFO + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_BASE_UDPHS,
-		.end	= AT91SAM9RL_BASE_UDPHS + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS,
-		.end	= NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
-	[idx] = {						\
-		.name		= nam,				\
-		.index		= idx,				\
-		.fifo_size	= maxpkt,			\
-		.nr_banks	= maxbk,			\
-		.can_dma	= dma,				\
-		.can_isoc	= isoc,				\
-	}
-
-static struct usba_ep_data usba_udc_ep[] __initdata = {
-	EP("ep0", 0, 64, 1, 0, 0),
-	EP("ep1", 1, 1024, 2, 1, 1),
-	EP("ep2", 2, 1024, 2, 1, 1),
-	EP("ep3", 3, 1024, 3, 1, 0),
-	EP("ep4", 4, 1024, 3, 1, 0),
-	EP("ep5", 5, 1024, 3, 1, 1),
-	EP("ep6", 6, 1024, 3, 1, 1),
-};
-
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
-	struct usba_platform_data pdata;
-	struct usba_ep_data ep[7];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
-	.name		= "atmel_usba_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &usba_udc_data.pdata,
-	},
-	.resource	= usba_udc_resources,
-	.num_resources	= ARRAY_SIZE(usba_udc_resources),
-};
-
-void __init at91_add_device_usba(struct usba_platform_data *data)
-{
-	/*
-	 * Invalid pins are 0 on AT91, but the usba driver is shared
-	 * with AVR32, which use negative values instead. Once/if
-	 * gpio_is_valid() is ported to AT91, revisit this code.
-	 */
-	usba_udc_data.pdata.vbus_pin = -EINVAL;
-	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
-
-	if (data && gpio_is_valid(data->vbus_pin)) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
-	}
-
-	/* Pullup pin is handled internally by USB device peripheral */
-
-	platform_device_register(&at91_usba_udc_device);
-}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct mci_platform_data mmc_data;
-
-static struct resource mmc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_MCI,
-		.end	= AT91SAM9RL_BASE_MCI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI,
-		.end	= NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9rl_mmc_device = {
-	.name		= "atmel_mci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc_data,
-	},
-	.resource	= mmc_resources,
-	.num_resources	= ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
-{
-	if (!data)
-		return;
-
-	if (data->slot[0].bus_width) {
-		/* input/irq */
-		if (gpio_is_valid(data->slot[0].detect_pin)) {
-			at91_set_gpio_input(data->slot[0].detect_pin, 1);
-			at91_set_deglitch(data->slot[0].detect_pin, 1);
-		}
-		if (gpio_is_valid(data->slot[0].wp_pin))
-			at91_set_gpio_input(data->slot[0].wp_pin, 1);
-
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA2, 0);
-
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA1, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA0, 1);
-		if (data->slot[0].bus_width == 4) {
-			at91_set_A_periph(AT91_PIN_PA3, 1);
-			at91_set_A_periph(AT91_PIN_PA4, 1);
-			at91_set_A_periph(AT91_PIN_PA5, 1);
-		}
-
-		mmc_data = *data;
-		platform_device_register(&at91sam9rl_mmc_device);
-	}
-}
-#else
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	[0] = {
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_BASE_ECC,
-		.end	= AT91SAM9RL_BASE_ECC + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device atmel_nand_device = {
-	.name		= "atmel_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
-	unsigned long csa;
-
-	if (!data)
-		return;
-
-	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
-	at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
-	/* enable pin */
-	if (gpio_is_valid(data->enable_pin))
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (gpio_is_valid(data->rdy_pin))
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (gpio_is_valid(data->det_pin))
-		at91_set_gpio_input(data->det_pin, 1);
-
-	at91_set_A_periph(AT91_PIN_PB4, 0);		/* NANDOE */
-	at91_set_A_periph(AT91_PIN_PB5, 0);		/* NANDWE */
-
-	nand_data = *data;
-	platform_device_register(&atmel_nand_device);
-}
-
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
-	.sda_pin		= AT91_PIN_PA23,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PA24,
-	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
-};
-
-static struct platform_device at91sam9rl_twi_device = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev.platform_data	= &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	at91_set_GPIO_periph(AT91_PIN_PA23, 1);		/* TWD (SDA) */
-	at91_set_multi_drive(AT91_PIN_PA23, 1);
-
-	at91_set_GPIO_periph(AT91_PIN_PA24, 1);		/* TWCK (SCL) */
-	at91_set_multi_drive(AT91_PIN_PA24, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91sam9rl_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_TWI0,
-		.end	= AT91SAM9RL_BASE_TWI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0,
-		.end	= NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9rl_twi_device = {
-	.name		= "i2c-at91sam9g20",
-	.id		= 0,
-	.resource	= twi_resources,
-	.num_resources	= ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	/* pins used for TWI interface */
-	at91_set_A_periph(AT91_PIN_PA23, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PA23, 1);
-
-	at91_set_A_periph(AT91_PIN_PA24, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PA24, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91sam9rl_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_SPI,
-		.end	= AT91SAM9RL_BASE_SPI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI,
-		.end	= NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9rl_spi_device = {
-	.name		= "atmel_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi_resources,
-	.num_resources	= ARRAY_SIZE(spi_resources),
-};
-
-static const unsigned spi_standard_cs[4] = { AT91_PIN_PA28, AT91_PIN_PB7, AT91_PIN_PD8, AT91_PIN_PD9 };
-
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-
-	at91_set_A_periph(AT91_PIN_PA25, 0);	/* MISO */
-	at91_set_A_periph(AT91_PIN_PA26, 0);	/* MOSI */
-	at91_set_A_periph(AT91_PIN_PA27, 0);	/* SPCK */
-
-	/* Enable SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else
-			cs_pin = spi_standard_cs[devices[i].chip_select];
-
-		if (!gpio_is_valid(cs_pin))
-			continue;
-
-		/* enable chip-select pin */
-		at91_set_gpio_output(cs_pin, 1);
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-	platform_device_register(&at91sam9rl_spi_device);
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  AC97
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
-static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct ac97c_platform_data ac97_data;
-
-static struct resource ac97_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_AC97C,
-		.end	= AT91SAM9RL_BASE_AC97C + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C,
-		.end	= NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9rl_ac97_device = {
-	.name		= "atmel_ac97c",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &ac97_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &ac97_data,
-	},
-	.resource	= ac97_resources,
-	.num_resources	= ARRAY_SIZE(ac97_resources),
-};
-
-void __init at91_add_device_ac97(struct ac97c_platform_data *data)
-{
-	if (!data)
-		return;
-
-	at91_set_A_periph(AT91_PIN_PD1, 0);	/* AC97FS */
-	at91_set_A_periph(AT91_PIN_PD2, 0);	/* AC97CK */
-	at91_set_A_periph(AT91_PIN_PD3, 0);	/* AC97TX */
-	at91_set_A_periph(AT91_PIN_PD4, 0);	/* AC97RX */
-
-	/* reset */
-	if (gpio_is_valid(data->reset_pin))
-		at91_set_gpio_output(data->reset_pin, 0);
-
-	ac97_data = *data;
-	platform_device_register(&at91sam9rl_ac97_device);
-}
-#else
-void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_pdata lcdc_data;
-
-static struct resource lcdc_resources[] = {