Merge tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "Pretty standard stuff with dtc upstream sync being the biggest piece.

   - Sync dtc to upstream commit 0931cea3ba20. This picks up overlay
     support in dtc.

   - Set dma_ops for reserved memory users.

   - Make references to IOMMU consistent in DT bindings.

   - Cleanup references to pm_power_off in bindings.

   - Move some display bindings that snuck into the old bindings/video/
     path.

   - Fix some wrong documentation paths caused from binding
     restructuring.

   - Vendor prefixes for Faraday and Fujitsu.

   - Fix an of_node ref counting leak in of_find_node_opts_by_path

   - Introduce new graph helper of_graph_get_remote_node() which will be
     used by DRM drivers in 4.12"

* tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (27 commits)
  DT: add Faraday Tec. as vendor
  of: introduce of_graph_get_remote_node
  of: Add missing space at end of pr_fmt().
  of: make of_device_make_bus_id() static
  of: fix of_node leak caused in of_find_node_opts_by_path
  dt-bindings: net: remove reference to fixed link support
  dt-bindings: power: reset: qnap-poweroff: Drop reference to pm_power_off
  dt-bindings: power: reset: gpio-poweroff: Drop reference to pm_power_off
  dt-bindings: mfd: as3722: Drop reference to pm_power_off
  dt-bindings: display: move ANX7814 and SiI8620 bridge bindings
  of/unittest: Swap arguments of of_unittest_apply_overlay()
  Documentation: usb: fix wrong documentation paths
  serial: fsl-imx-uart.txt: Remove generic property
  devicetree: Add Fujitsu Ltd. vendor prefix
  Documentation: display: fix wrong documentation paths
  of: remove redundant memset in overlay
  bus:qcom : Fix typo in qcom,ebi2.txt
  dt-bindings: qman: Remove pool channel node
  Documentation: panel-dpi: fix path to display-timing.txt
  devicetree: bindings: clk: mvebu: fix description for sata1 on Armada XP
  ...

66 files changed, 1781 insertions, 1100 deletions

diff --git a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt
index 920681f552db..5a7d567f6833 100644
--- a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt
+++ b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt
@@ -51,7 +51,7 @@ Required properties:
 - compatible: should be one of:
   "qcom,msm8660-ebi2"
   "qcom,apq8060-ebi2"
-- #address-cells: shoule be <2>: the first cell is the chipselect,
+- #address-cells: should be <2>: the first cell is the chipselect,
   the second cell is the offset inside the memory range
 - #size-cells: should be <1>
 - ranges: should be set to:
@@ -64,7 +64,7 @@ Required properties:
 - reg: two ranges of registers: EBI2 config and XMEM config areas
 - reg-names: should be "ebi2", "xmem"
 - clocks: two clocks, EBI_2X and EBI
-- clock-names: shoule be "ebi2x", "ebi2"
+- clock-names: should be "ebi2x", "ebi2"
 
 Optional subnodes:
 - Nodes inside the EBI2 will be considered device nodes.
@@ -100,7 +100,7 @@ Optional properties arrays for FAST chip selects:
   assertion, with respect to the cycle where ADV (address valid) is asserted.
   2 means 2 cycles between ADV and OE. Valid values 0, 1, 2 or 3.
 - qcom,xmem-read-hold-cycles: the length in cycles of the first segment of a
-  read transfer. For a single read trandfer this will be the time from CS
+  read transfer. For a single read transfer this will be the time from CS
   assertion to OE assertion. Valid values 0 thru 15.
 
 
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
index cb8542d910b3..5142efc8099d 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -117,7 +117,7 @@ ID	Clock	Peripheral
 25	tdm	Time Division Mplx
 28	xor1	XOR DMA 1
 29	sata1lnk
-30	sata1	SATA Host 0
+30	sata1	SATA Host 1
 
 The following is a list of provided IDs for Dove:
 ID	Clock	Peripheral
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt
index 3e3039a8a253..ef89ab46b2c9 100644
--- a/Documentation/devicetree/bindings/display/arm,pl11x.txt
+++ b/Documentation/devicetree/bindings/display/arm,pl11x.txt
@@ -22,7 +22,7 @@ Required properties:
 
 - clocks: contains phandle and clock specifier pairs for the entries
 	in the clock-names property. See
-	Documentation/devicetree/binding/clock/clock-bindings.txt
+	Documentation/devicetree/bindings/clock/clock-bindings.txt
 
 Optional properties:
 
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 4a0f4f7682ad..0c7473dd0e51 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -33,7 +33,7 @@ Optional properties for dp-controller:
 		in Documentation/devicetree/bindings/media/video-interfaces.txt,
 		please refer to the SoC specific binding document:
 		* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
-		* Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+		* Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
 
 [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
 -------------------------------------------------------------------------------
diff --git a/Documentation/devicetree/bindings/video/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
index b2a22c28c9b3..b2a22c28c9b3 100644
--- a/Documentation/devicetree/bindings/video/bridge/anx7814.txt
+++ b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
diff --git a/Documentation/devicetree/bindings/video/bridge/sil-sii8620.txt b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
index 9409d9c6a260..9409d9c6a260 100644
--- a/Documentation/devicetree/bindings/video/bridge/sil-sii8620.txt
+++ b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
diff --git a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
index e9c65746e2f1..b0e506610400 100644
--- a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
+++ b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
@@ -6,7 +6,7 @@ Required properties:
               location and size of the framebuffer memory.
 - clocks    : phandle + clock specifier pair of the FB reference clock.
 - display   : phandle to a display node as described in
-              Documentation/devicetree/bindings/display/display-timing.txt.
+              Documentation/devicetree/bindings/display/panel/display-timing.txt.
               Additionally, the display node has to define properties:
   - bits-per-pixel: Bits per pixel.
   - ac-prescale   : LCD AC bias frequency. This frequency is the required
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
index 3938caacf11c..027d6c210f7e 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
@@ -38,7 +38,7 @@ Optional Properties:
 		Can be used in case timings cannot be provided otherwise
 		or to override timings provided by the panel.
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
index c7c6b9af87ac..18645e0228b0 100644
--- a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
+++ b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
@@ -83,7 +83,7 @@ in [2]. The following are properties specific to those nodes:
 		3 - for parallel output,
 		4 - for write-back interface
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
index 00d5f8ea7ec6..7a5c0e204c8e 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
@@ -9,7 +9,7 @@ Required properties:
 
 Required nodes:
 - display: Phandle to a display node as described in
-	Documentation/devicetree/bindings/display/display-timing.txt
+	Documentation/devicetree/bindings/display/panel/display-timing.txt
 	Additional, the display node has to define properties:
 	- bits-per-pixel: Bits per pixel
 	- fsl,pcr: LCDC PCR value
diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt
index a407462c885e..38c637fa39dd 100644
--- a/Documentation/devicetree/bindings/display/imx/ldb.txt
+++ b/Documentation/devicetree/bindings/display/imx/ldb.txt
@@ -64,7 +64,7 @@ Required properties:
 Optional properties (required if display-timings are used):
  - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
  - display-timings : A node that describes the display timings as defined in
-   Documentation/devicetree/bindings/display/display-timing.txt.
+   Documentation/devicetree/bindings/display/panel/display-timing.txt.
  - fsl,data-mapping : should be "spwg" or "jeida"
                       This describes how the color bits are laid out in the
                       serialized LVDS signal.
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index db6e77edbea8..708f5664a316 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -55,7 +55,7 @@ Required properties (DMA function blocks):
 	"mediatek,<chip>-disp-rdma"
 	"mediatek,<chip>-disp-wdma"
 - larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
+  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
 - iommus: Should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index 6b1cab17f52d..fa00e62e1cf6 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -108,7 +108,7 @@ Optional properties:
 - qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
   regulator is wanted.
 
-[1] Documentation/devicetree/bindings/clocks/clock-bindings.txt
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/graph.txt
 [3] Documentation/devicetree/bindings/media/video-interfaces.txt
 [4] Documentation/devicetree/bindings/display/panel/
diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt
index 3a20f6ea5898..e63032be5401 100644
--- a/Documentation/devicetree/bindings/display/msm/edp.txt
+++ b/Documentation/devicetree/bindings/display/msm/edp.txt
@@ -10,7 +10,7 @@ Required properties:
 - interrupts: The interrupt signal from the eDP block.
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: device clocks
-  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - clock-names: the following clocks are required:
   * "core_clk"
   * "iface_clk"
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
index 2ad578984fcf..2d306f402d18 100644
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt
@@ -49,7 +49,7 @@ Required properties:
     * "hdmi_tx_l4"
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: device clocks
-  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - core-vdda-supply: phandle to vdda regulator device node
 
 Example:
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt b/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
index b52ac52757df..d4add13e592d 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
+++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
@@ -12,7 +12,7 @@ Optional properties:
 
 Required nodes:
 - "panel-timing" containing video timings
-  (Documentation/devicetree/bindings/display/display-timing.txt)
+  (Documentation/devicetree/bindings/display/panel/display-timing.txt)
 - Video port for DPI input
 
 Example
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
index fc595d9b985b..354d4d1df4ff 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
@@ -20,7 +20,7 @@ The device node can contain one 'port' child node with one child
 'endpoint' node, according to the bindings defined in [3]. This
 node should describe panel's video bus.
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 [2]: Documentation/devicetree/bindings/spi/spi-bus.txt
 [3]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt
index 25701c81b5e0..9e766c5f86da 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt
@@ -21,7 +21,7 @@ The device node can contain one 'port' child node with one child
 'endpoint' node, according to the bindings defined in [2]. This
 node should describe panel's video bus.
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index 01cced1c2a18..47665a12786f 100644
--- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -35,7 +35,7 @@ Optional property for different chips:
 	       Required elements: "grf"
 
 For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+ * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
 - phys (required)
 - phy-names (required)
 - hpd-gpios (optional)
diff --git a/Documentation/devicetree/bindings/display/tilcdc/panel.txt b/Documentation/devicetree/bindings/display/tilcdc/panel.txt
index f20b31cdc59a..808216310ea2 100644
--- a/Documentation/devicetree/bindings/display/tilcdc/panel.txt
+++ b/Documentation/devicetree/bindings/display/tilcdc/panel.txt
@@ -15,7 +15,7 @@ Required properties:
  - display-timings: typical videomode of lcd panel.  Multiple video modes
    can be listed if the panel supports multiple timings, but the 'native-mode'
    should be the preferred/default resolution.  Refer to
-   Documentation/devicetree/bindings/display/display-timing.txt for display
+   Documentation/devicetree/bindings/display/panel/display-timing.txt for display
    timing binding details.
 
 Optional properties:
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
index e862d1485205..6cdf32d037fc 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
@@ -36,15 +36,15 @@ conditions.
                   combined interrupt, it must be listed multiple times.
 
 - #iommu-cells  : See Documentation/devicetree/bindings/iommu/iommu.txt
-                  for details. With a value of 1, each "iommus" entry
+                  for details. With a value of 1, each IOMMU specifier
                   represents a distinct stream ID emitted by that device
                   into the relevant SMMU.
 
                   SMMUs with stream matching support and complex masters
-                  may use a value of 2, where the second cell represents
-                  an SMR mask to combine with the ID in the first cell.
-                  Care must be taken to ensure the set of matched IDs
-                  does not result in conflicts.
+                  may use a value of 2, where the second cell of the
+                  IOMMU specifier represents an SMR mask to combine with
+                  the ID in the first cell.  Care must be taken to ensure
+                  the set of matched IDs does not result in conflicts.