Merge tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:

 - SMMU Updates from Will Deacon:

     - SMMUv3:
        - Support stalling faults for platform devices
        - Decrease defaults sizes for the event and PRI queues
     - SMMUv2:
        - Support for a new '->probe_finalize' hook, needed by Nvidia
        - Even more Qualcomm compatible strings
        - Avoid Adreno TTBR1 quirk for DB820C platform

 - Intel VT-d updates from Lu Baolu:

     - Convert Intel IOMMU to use sva_lib helpers in iommu core
     - ftrace and debugfs supports for page fault handling
     - Support asynchronous nested capabilities
     - Various misc cleanups

 - Support for new VIOT ACPI table to make the VirtIO IOMMU
   available on x86

 - Add the amd_iommu=force_enable command line option to enable
   the IOMMU on platforms where they are known to cause problems

 - Support for version 2 of the Rockchip IOMMU

 - Various smaller fixes, cleanups and refactorings

* tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
  iommu/virtio: Enable x86 support
  iommu/dma: Pass address limit rather than size to iommu_setup_dma_ops()
  ACPI: Add driver for the VIOT table
  ACPI: Move IOMMU setup code out of IORT
  ACPI: arm64: Move DMA setup operations out of IORT
  iommu/vt-d: Fix dereference of pointer info before it is null checked
  iommu: Update "iommu.strict" documentation
  iommu/arm-smmu: Check smmu->impl pointer before dereferencing
  iommu/arm-smmu-v3: Remove unnecessary oom message
  iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation
  iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
  iommu/vt-d: Fix linker error on 32-bit
  iommu/vt-d: No need to typecast
  iommu/vt-d: Define counter explicitly as unsigned int
  iommu/vt-d: Remove unnecessary braces
  iommu/vt-d: Removed unused iommu_count in dmar domain
  iommu/vt-d: Use bitfields for DMAR capabilities
  iommu/vt-d: Use DEVICE_ATTR_RO macro
  iommu/vt-d: Fix out-bounds-warning in intel/svm.c
  iommu/vt-d: Add PRQ handling latency sampling
  ...

56 files changed, 2172 insertions, 781 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 13f13fdd4731..0081d83457e8 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -301,6 +301,9 @@
 					  allowed anymore to lift isolation
 					  requirements as needed. This option
 					  does not override iommu=pt
+			force_enable - Force enable the IOMMU on platforms known
+				       to be buggy with IOMMU enabled. Use this
+				       option with care.
 
 	amd_iommu_dump=	[HW,X86-64]
 			Enable AMD IOMMU driver option to dump the ACPI table
@@ -2031,7 +2034,7 @@
 			  forcing Dual Address Cycle for PCI cards supporting
 			  greater than 32-bit addressing.
 
-	iommu.strict=	[ARM64] Configure TLB invalidation behaviour
+	iommu.strict=	[ARM64, X86] Configure TLB invalidation behaviour
 			Format: { "0" | "1" }
 			0 - Lazy mode.
 			  Request that DMA unmap operations use deferred
@@ -2042,6 +2045,10 @@
 			1 - Strict mode (default).
 			  DMA unmap operations invalidate IOMMU hardware TLBs
 			  synchronously.
+			Note: on x86, the default behaviour depends on the
+			equivalent driver-specific parameters, but a strict
+			mode explicitly specified by either method takes
+			precedence.
 
 	iommu.passthrough=
 			[ARM64, X86] Configure DMA to bypass the IOMMU by default.
diff --git a/Documentation/devicetree/bindings/iommu/iommu.txt b/Documentation/devicetree/bindings/iommu/iommu.txt
index 3c36334e4f94..26ba9e530f13 100644
--- a/Documentation/devicetree/bindings/iommu/iommu.txt
+++ b/Documentation/devicetree/bindings/iommu/iommu.txt
@@ -92,6 +92,24 @@ Optional properties:
   tagging DMA transactions with an address space identifier. By default,
   this is 0, which means that the device only has one address space.
 
+- dma-can-stall: When present, the master can wait for a transaction to
+  complete for an indefinite amount of time. Upon translation fault some
+  IOMMUs, instead of aborting the translation immediately, may first
+  notify the driver and keep the transaction in flight. This allows the OS
+  to inspect the fault and, for example, make physical pages resident
+  before updating the mappings and completing the transaction. Such IOMMU
+  accepts a limited number of simultaneous stalled transactions before
+  having to either put back-pressure on the master, or abort new faulting
+  transactions.
+
+  Firmware has to opt-in stalling, because most buses and masters don't
+  support it. In particular it isn't compatible with PCI, where
+  transactions have to complete before a time limit. More generally it
+  won't work in systems and masters that haven't been designed for
+  stalling. For example the OS, in order to handle a stalled transaction,
+  may attempt to retrieve pages from secondary storage in a stalled
+  domain, leading to a deadlock.
+
 
 Notes:
 ======
diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
deleted file mode 100644
index 6ecefea1c6f9..000000000000
--- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Rockchip IOMMU
-==============
-
-A Rockchip DRM iommu translates io virtual addresses to physical addresses for
-its master device.  Each slave device is bound to a single master device, and
-shares its clocks, power domain and irq.
-
-Required properties:
-- compatible      : Should be "rockchip,iommu"
-- reg             : Address space for the configuration registers
-- interrupts      : Interrupt specifier for the IOMMU instance
-- interrupt-names : Interrupt name for the IOMMU instance
-- #iommu-cells    : Should be <0>.  This indicates the iommu is a
-                    "single-master" device, and needs no additional information
-                    to associate with its master device.  See:
-                    Documentation/devicetree/bindings/iommu/iommu.txt
-- clocks          : A list of clocks required for the IOMMU to be accessible by
-                    the host CPU.
-- clock-names     : Should contain the following:
-	"iface" - Main peripheral bus clock (PCLK/HCL) (required)
-	"aclk"  - AXI bus clock (required)
-
-Optional properties:
-- rockchip,disable-mmu-reset : Don't use the mmu reset operation.
-			       Some mmu instances may produce unexpected results
-			       when the reset operation is used.
-
-Example:
-
-	vopl_mmu: iommu@ff940300 {
-		compatible = "rockchip,iommu";
-		reg = <0xff940300 0x100>;
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vopl_mmu";
-		clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
-		clock-names = "aclk", "iface";
-		#iommu-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
new file mode 100644
index 000000000000..d2e28a9e3545
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/rockchip,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip IOMMU
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |+
+  A Rockchip DRM iommu translates io virtual addresses to physical addresses for
+  its master device. Each slave device is bound to a single master device and
+  shares its clocks, power domain and irq.
+
+  For information on assigning IOMMU controller to its peripheral devices,
+  see generic IOMMU bindings.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,iommu
+      - rockchip,rk3568-iommu
+
+  reg:
+    items:
+      - description: configuration registers for MMU instance 0
+      - description: configuration registers for MMU instance 1
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    items:
+      - description: interruption for MMU instance 0
+      - description: interruption for MMU instance 1
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    items:
+      - description: Core clock
+      - description: Interface clock
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: iface
+
+  "#iommu-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,disable-mmu-reset:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Do not use the mmu reset operation.
+      Some mmu instances may produce unexpected results
+      when the reset operation is used.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vopl_mmu: iommu@ff940300 {
+      compatible = "rockchip,iommu";
+      reg = <0xff940300 0x100>;
+      interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+      clock-names = "aclk", "iface";
+      #iommu-cells = <0>;
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 0d9d8fbd9e92..4d42bc8c9b8b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -431,6 +431,14 @@ W:	https://01.org/linux-acpi
 B:	https://bugzilla.kernel.org
 F:	drivers/acpi/acpi_video.c
 
+ACPI VIOT DRIVER
+M:	Jean-Philippe Brucker <jean-philippe@linaro.org>
+L:	linux-acpi@vger.kernel.org
+L:	iommu@lists.linux-foundation.org
+S:	Maintained
+F:	drivers/acpi/viot.c
+F:	include/linux/acpi_viot.h
+
 ACPI WMI DRIVER
 L:	platform-driver-x86@vger.kernel.org
 S:	Orphan
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index ce430ba9c118..5d06216c5c1c 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1136,7 +1136,7 @@
 		};
 
 		adreno_smmu: iommu@b40000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			compatible = "qcom,msm8996-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
 			reg = <0x00b40000 0x10000>;
 
 			#global-interrupts = <1>;
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index 4bf1dd3eb041..6719f9efea09 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -50,7 +50,7 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 
 	dev->dma_coherent = coherent;
 	if (iommu)
-		iommu_setup_dma_ops(dev, dma_base, size);
+		iommu_setup_dma_ops(dev, dma_base, dma_base + size - 1);
 
 #ifdef CONFIG_XEN
 	if (xen_swiotlb_detect())
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 3972de7b7565..fe0bb6277e4d 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -526,6 +526,9 @@ endif
 
 source "drivers/acpi/pmic/Kconfig"
 
+config ACPI_VIOT
+	bool
+
 endif	# ACPI
 
 config X86_PM_TIMER
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index ceb1aed4b1fc..3018714e87d9 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -124,3 +124,5 @@ video-objs			+= acpi_video.o video_detect.o
 obj-y				+= dptf/
 
 obj-$(CONFIG_ARM64)		+= arm64/
+
+obj-$(CONFIG_ACPI_VIOT)		+= viot.o
diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
index 6ff50f4ed947..66acbe77f46e 100644
--- a/drivers/acpi/arm64/Makefile
+++ b/drivers/acpi/arm64/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_ACPI_IORT) 	+= iort.o
 obj-$(CONFIG_ACPI_GTDT) 	+= gtdt.o
+obj-y				+= dma.o
diff --git a/drivers/acpi/arm64/dma.c b/drivers/acpi/arm64/dma.c
new file mode 100644
index 000000000000..f16739ad3cc0
--- /dev/null
+++ b/drivers/acpi/arm64/dma.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/acpi.h>
+#include <linux/acpi_iort.h>
+#include <linux/device.h>
+#include <linux/dma-direct.h>
+
+void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
+{
+	int ret;
+	u64 end, mask;
+	u64 dmaaddr = 0, size = 0, offset = 0;
+
+	/*
+	 * If @dev is expected to be DMA-capable then the bus code that created
+	 * it should have initialised its dma_mask pointer by this point. For
+	 * now, we'll continue the legacy behaviour of coercing it to the
+	 * coherent mask if not, but we'll no longer do so quietly.
+	 */
+	if (!dev->dma_mask) {
+		dev_warn(dev, "DMA mask not set\n");
+		dev->dma_mask = &dev->coherent_dma_mask;
+	}
+
+	if (dev->coherent_dma_mask)
+		size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1);
+	else
+		size = 1ULL << 32;
+
+	ret = acpi_dma_get_range(dev, &dmaaddr, &offset, &size);
+	if (ret == -ENODEV)
+		ret = iort_dma_get_ranges(dev, &size);
+	if (!ret) {
+		/*
+		 * Limit coherent and dma mask based on size retrieved from
+		 * firmware.
+		 */
+		end = dmaaddr + size - 1;
+		mask = DMA_BIT_MASK(ilog2(end) + 1);
+		dev->bus_dma_limit = end;
+		dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
+		*dev->dma_mask = min(*dev->dma_mask, mask);
+	}
+
+	*dma_addr = dmaaddr;
+	*dma_size = size;
+
+	ret = dma_direct_set_offset(dev, dmaaddr + offset, dmaaddr, size);
+
+	dev_dbg(dev, "dma_offset(%#08llx)%s\n", offset, ret ? " failed!" : "");
+}
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index e34937e11186..3b23fb775ac4 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -806,23 +806,6 @@ static struct acpi_iort_node *iort_get_msi_resv_iommu(struct device *dev)
 	return NULL;
 }
 
-static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev)
-{
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-
-	return (fwspec && fwspec->ops) ? fwspec->ops : NULL;
-}
-
-static inline int iort_add_device_replay(struct device *dev)
-{
-	int err = 0;
-
-	if (dev->bus && !device_iommu_mapped(dev))
-		err = iommu_probe_device(dev);
-
-	return err;
-}
-
 /**
  * iort_iommu_msi_get_resv_regions - Reserved region driver helper
  * @dev: Device from iommu_get_resv_regions()
@@ -900,18 +883,6 @@ static inline bool iort_iommu_driver_enabled(u8 type)
 	}
 }
 
-static int arm_smmu_iort_xlate(struct device *dev, u32 streamid,
-			       struct fwnode_handle *fwnode,
-			       const struct iommu_ops *ops)
-{
-	int ret = iommu_fwspec_init(dev, fwnode, ops);
-
-	if (!ret)
-		ret = iommu_fwspec_add_ids(dev, &streamid, 1);
-
-	return ret;
-}
-
 static bool iort_pci_rc_supports_ats(struct acpi_iort_node *node)
 {
 	struct acpi_iort_root_complex *pci_rc;
@@ -946,7 +917,7 @@ static int iort_iommu_xlate(struct device *dev, struct acpi_iort_node *node,
 		return iort_iommu_driver_enabled(node->type) ?
 		       -EPROBE_DEFER : -ENODEV;
 
-	return arm_smmu_iort_xlate(dev, streamid, iort_fwnode, ops);
+	return acpi_iommu_fwspec_init(dev, streamid, iort_fwnode, ops);
 }
 
 struct iort_pci_alias_info {
@@ -968,13 +939,15 @@ static int iort_pci_iommu_init(struct pci_dev *pdev, u16 alias, void *data)
 static void iort_named_component_init(struct device *dev,
 				      struct acpi_iort_node *node)
 {
-	struct property_entry props[2] = {};
+	struct property_entry props[3] = {};
 	struct acpi_iort_named_component *nc;
 
 	nc = (struct acpi_iort_named_component *)node->node_data;
 	props[0] = PROPERTY_ENTRY_U32("pasid-num-bits",
 				      FIELD_GET(ACPI_IORT_NC_PASID_BITS,
 						nc->node_flags));
+	if (nc->node_flags & ACPI_IORT_NC_STALL_SUPPORTED)
+		props[1] = PROPERTY_ENTRY_BOOL("dma-can-stall");
 
 	if (device_create_managed_software_node(dev, props, NULL))
 		dev_warn(dev, "Could not add device properties\n");
@@ -1020,24 +993,13 @@ static int iort_nc_iommu_map_id(struct device *dev,
  * @dev: device to configure
  * @id_in: optional input id const value pointer
  *
- * Returns: iommu_ops pointer on configuration success
- *          NULL on configuration failure
+ * Returns: 0 on success, <0 on failure
  */
-const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
-						const u32 *id_in)
+int iort_iommu_configure_id(struct device *dev, const u32 *id_in)
 {
 	struct acpi_iort_node *node;
-	const struct iommu_ops *ops;
 	int err = -ENODEV;
 
-	/*
-	 * If we already translated the fwspec there
-	 * is nothing left to do, return the iommu_ops.
-	 */
-	ops = iort_fwspec_iommu_ops(dev);
-	if (ops)
-		return ops;
-
 	if (dev_is_pci(dev)) {
 		struct iommu_fwspec *fwspec;
 		struct pci_bus *bus = to_pci_dev(dev)->bus;
@@ -1046,7 +1008,7 @@ const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
 		node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
 				      iort_match_node_callback, &bus->dev);
 		if (!node)
-			return NULL;
+			return -ENODEV;
 
 		info.node = node;
 		err = pci_for_each_dma_alias(to_pci_dev(dev),
@@ -1059,7 +1021,7 @@ const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
 		node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
 				      iort_match_node_callback, dev);
 		if (!node)
-			return NULL;
+			return -ENODEV;
 
 		err = id_in ? iort_nc_iommu_map_id(dev, node, id_in) :
 			      iort_nc_iommu_map(dev, node);
@@ -1068,32 +1030,14 @@ const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
 			iort_named_component_init(dev, node);
 	}
 
-	/*
-	 * If we have reason to believe the IOMMU driver missed the initial
-	 * add_device callback for dev, replay it to get things in order.
-	 */
-	if (!err) {
-		ops = iort_fwspec_iommu_ops(dev);
-		err = iort_add_device_replay(dev);
-	}
-
-	/* Ignore all other errors apart from EPROBE_DEFER */
-	if (err == -EPROBE_DEFER) {
-		ops = ERR_PTR(err);
-	} else if (err) {
-		dev_dbg(dev, "Adding to IOMMU failed: %d\n", err);
-		ops = NULL;
-	}
-
-	return ops;
+	return err;
 }
 
 #else
 int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head)
 { return 0; }
-const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
-						const u32 *input_id)
-{ return NULL; }
+int iort_iommu_configure_id(struct device *dev, const u32 *input_id)
+{ return -ENODEV; }
 #endif
 
 static int nc_dma_get_range(struct device *dev, u64 *size)
@@ -1144,56 +1088,18 @@ static int rc_dma_get_range(struct device *dev, u64 *size)
 }
 
 /**
- * iort_dma_setup() - Set-up device DMA parameters.
+ * iort_dma_get_ranges() - Look up DMA addressing limit for the device
+ * @dev: device to lookup
+ * @size: DMA range size result pointer
  *
- * @dev: device to configure
- * @dma_addr: device DMA address result pointer
- * @dma_size: DMA range size result pointer
+ * Return: 0 on success, an error otherwise.
  */
-void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
+int iort_dma_get_ranges(struct device *dev, u64 *size)
 {
-	u64 end, mask, dmaaddr = 0, size = 0, offset = 0;
-	int ret;
-
-	/*
-	 * If @dev is expected to be DMA-capable then the bus code that created
-	 * it should have initialised its dma_mask pointer by this point. For
-	 * now, we'll continue the legacy behaviour of coercing it to the
-	 * coherent mask if not, but we'll no longer do so quietly.
-	 */
-	if (!dev->dma_mask) {
-		dev_warn(dev, "DMA mask not set\n");
-		dev->dma_mask = &dev->coherent_dma_mask;
-	}
-
-	if (dev->coherent_dma_mask)
-		size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1);
+	if (dev_is_pci(dev))
+		return rc_dma_get_range(dev, size);
 	else
-		size = 1ULL << 32;
-
-	ret = acpi_dma_get_range(dev, &dmaaddr, &offset, &size);
-	if (ret == -ENODEV)
-		ret = dev_is_pci(dev) ? rc_dma_get_range(dev, &size)
-				      : nc_dma_get_range(dev, &size);
-
-	if (!ret) {
-		/*
-		 * Limit coherent and dma mask based on size retrieved from
-		 * firmware.
-		 */
-		end = dmaaddr + size - 1;
-		mask = DMA_BIT_MASK(ilog2(end) + 1);
-		dev->bus_dma_limit = end;
-		dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
-		*dev->dma_mask = min(*dev->dma_mask, mask);
-	}
-
-	*dma_addr = dmaaddr;
-	*dma_size = size;
-
-	ret = dma_direct_set_offset(dev, dmaaddr + offset, dmaaddr, size);
-
-	dev_dbg(dev, "dma_offset(%#08llx)%s\n", offset, ret ? " failed!" : "");
+		return nc_dma_get_range(dev, size);
 }
 
 static void __init acpi_iort_register_irq(int hwirq, const char *name,
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 60fb6a843853..ee24246d88fd 100644
--- a/d