Merge tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski
 "This was a quiet release cycle for the GPIO tree and so this
  pull-request is relatively small.

  We have one new driver, some minor improvements to the GPIO core code
  and across several drivers, some DT and documentation updates but in
  general nothing stands out or is controversial. All changes have spent
  time in next with no reported issues (or ones that were quickly
  fixed).

  GPIO core:
   - remove more unused legacy interfaces (after converting the last
     remaining users to better alternatives)
   - update kerneldocs
   - improve error handling and log messages in GPIO ACPI code
   - remove dead code (always true checks) from GPIOLIB

  New drivers:
   - add a driver for Intel Granite Rapids-D vGPIO

  Driver improvements:
   - use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24
   - provide an ID table for gpio-cros-ec to avoid a driver name
     fallback check
   - add support for gpio-ranges for GPIO drivers supporting multiple
     GPIO banks
   - switch to using dynamic GPIO base in gpio-brcmstb
   - fix irq handling in gpio-npcm-sgpio
   - switch to memory mapped IO accessors in gpio-sch

  DT bindings:
   - add support for gpio-ranges to gpio-brcmstb
   - add support for a new model and the gpio-line-names property to
     gpio-mpfs

  Documentation:
   - replace leading tabs with spaces in code blocks
   - fix typos"

* tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (30 commits)
  gpio: nuvoton: Fix sgpio irq handle error
  gpiolib: Discourage to use formatting strings in line names
  gpio: brcmstb: add support for gpio-ranges
  gpio: of: support gpio-ranges for multiple gpiochip devices
  dt-bindings: gpio: brcmstb: add gpio-ranges
  gpio: Add Intel Granite Rapids-D vGPIO driver
  gpio: brcmstb: Use dynamic GPIO base numbers
  gpiolib: acpi: Set label for IRQ only lines
  gpiolib: acpi: Add fwnode name to the GPIO interrupt label
  gpiolib: Get rid of never false gpio_is_valid() calls
  gpiolib: acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
  gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
  gpiolib: acpi: Simplify error handling in __acpi_find_gpio()
  gpiolib: acpi: Extract __acpi_find_gpio() helper
  gpio: sch: Utilise temporary variable for struct device
  gpio: sch: Switch to memory mapped IO accessors
  gpio: regmap: Use -ENOTSUPP consistently
  gpio: pcie-idio-24: Use -ENOTSUPP consistently
  Documentation: gpio: Replace leading TABs by spaces in code blocks
  gpiolib: acpi: Check for errors first in acpi_find_gpio()
  ...

31 files changed, 622 insertions, 235 deletions

diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
index a1e71c974e79..f096f286da19 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
@@ -62,6 +62,8 @@ properties:
 
   interrupt-controller: true
 
+  gpio-ranges: true
+
   wakeup-source:
     type: boolean
     description: >
@@ -88,6 +90,7 @@ examples:
         interrupt-parent = <&irq0_intc>;
         interrupts = <0x6>;
         brcm,gpio-bank-widths = <32 32 32 24>;
+        gpio-ranges = <&pinctrl 0 0 120>;
     };
 
     upg_gio_aon: gpio@f04172c0 {
diff --git a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
index d481e78958a7..d61569b3f15b 100644
--- a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
@@ -14,6 +14,7 @@ properties:
     items:
       - enum:
           - microchip,mpfs-gpio
+          - microchip,coregpio-rtl-v3
 
   reg:
     maxItems: 1
@@ -43,6 +44,7 @@ properties:
     default: 32
 
   gpio-controller: true
+  gpio-line-names: true
 
 patternProperties:
   "^.+-hog(-[0-9]+)?$":
@@ -62,12 +64,21 @@ patternProperties:
       - gpio-hog
       - gpios
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,mpfs-gpio
+    then:
+      required:
+        - interrupts
+        - "#interrupt-cells"
+        - interrupt-controller
+
 required:
   - compatible
   - reg
-  - interrupts
-  - "#interrupt-cells"
-  - interrupt-controller
   - "#gpio-cells"
   - gpio-controller
   - clocks
diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst
index bf6319cc531b..e541bd2e898b 100644
--- a/Documentation/driver-api/gpio/driver.rst
+++ b/Documentation/driver-api/gpio/driver.rst
@@ -7,7 +7,7 @@ This document serves as a guide for writers of GPIO chip drivers.
 Each GPIO controller driver needs to include the following header, which defines
 the structures used to define a GPIO driver::
 
-	#include <linux/gpio/driver.h>
+  #include <linux/gpio/driver.h>
 
 
 Internal Representation of GPIOs
@@ -144,7 +144,7 @@ is not open, it will present a high-impedance (tristate) to the external rail::
      in ----||                   |/
             ||--+         in ----|
                 |                |\
-               GND	           GND
+               GND                 GND
 
 This configuration is normally used as a way to achieve one of two things:
 
@@ -550,10 +550,10 @@ the interrupt separately and go with it:
   struct my_gpio *g;
   struct gpio_irq_chip *girq;
 
-  ret = devm_request_threaded_irq(dev, irq, NULL,
-		irq_thread_fn, IRQF_ONESHOT, "my-chip", g);
+  ret = devm_request_threaded_irq(dev, irq, NULL, irq_thread_fn,
+                                  IRQF_ONESHOT, "my-chip", g);
   if (ret < 0)
-	return ret;
+      return ret;
 
   /* Get a pointer to the gpio_irq_chip */
   girq = &g->gc.irq;
@@ -681,12 +681,12 @@ certain operations and keep track of usage inside of the gpiolib subsystem.
 Input GPIOs can be used as IRQ signals. When this happens, a driver is requested
 to mark the GPIO as being used as an IRQ::
 
-	int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset)
+  int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset)
 
 This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock
 is released::
 
-	void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset)
+  void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset)
 
 When implementing an irqchip inside a GPIO driver, these two functions should
 typically be called in the .startup() and .shutdown() callbacks from the
@@ -708,12 +708,12 @@ When a GPIO is used as an IRQ signal, then gpiolib also needs to know if
 the IRQ is enabled or disabled. In order to inform gpiolib about this,
 the irqchip driver should call::
 
-	void gpiochip_disable_irq(struct gpio_chip *chip, unsigned int offset)
+  void gpiochip_disable_irq(struct gpio_chip *chip, unsigned int offset)
 
 This allows drivers to drive the GPIO as an output while the IRQ is
 disabled. When the IRQ is enabled again, a driver should call::
 
-	void gpiochip_enable_irq(struct gpio_chip *chip, unsigned int offset)
+  void gpiochip_enable_irq(struct gpio_chip *chip, unsigned int offset)
 
 When implementing an irqchip inside a GPIO driver, these two functions should
 typically be called in the .irq_disable() and .irq_enable() callbacks from the
@@ -763,12 +763,12 @@ Sometimes it is useful to allow a GPIO chip driver to request its own GPIO
 descriptors through the gpiolib API. A GPIO driver can use the following
 functions to request and free descriptors::
 
-	struct gpio_desc *gpiochip_request_own_desc(struct gpio_desc *desc,
-						    u16 hwnum,
-						    const char *label,
-						    enum gpiod_flags flags)
+  struct gpio_desc *gpiochip_request_own_desc(struct gpio_desc *desc,
+                                              u16 hwnum,
+                                              const char *label,
+                                              enum gpiod_flags flags)
 
-	void gpiochip_free_own_desc(struct gpio_desc *desc)
+  void gpiochip_free_own_desc(struct gpio_desc *desc)
 
 Descriptors requested with gpiochip_request_own_desc() must be released with
 gpiochip_free_own_desc().
diff --git a/Documentation/driver-api/gpio/legacy.rst b/Documentation/driver-api/gpio/legacy.rst
index b6505914791c..534dfe95d128 100644
--- a/Documentation/driver-api/gpio/legacy.rst
+++ b/Documentation/driver-api/gpio/legacy.rst
@@ -225,8 +225,6 @@ setup or driver probe/teardown code, so this is an easy constraint.)::
                 gpio_request()
 
         ## 	gpio_request_one()
-        ##	gpio_request_array()
-        ## 	gpio_free_array()
 
                 gpio_free()
 
@@ -295,14 +293,6 @@ are claimed, three additional calls are defined::
 	 */
 	int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
 
-	/* request multiple GPIOs in a single call
-	 */
-	int gpio_request_array(struct gpio *array, size_t num);
-
-	/* release multiple GPIOs in a single call
-	 */
-	void gpio_free_array(struct gpio *array, size_t num);
-
 where 'flags' is currently defined to specify the following properties:
 
 	* GPIOF_DIR_IN		- to configure direction as input
@@ -341,12 +331,6 @@ A typical example of usage::
 	if (err)
 		...
 
-	err = gpio_request_array(leds_gpios, ARRAY_SIZE(leds_gpios));
-	if (err)
-		...
-
-	gpio_free_array(leds_gpios, ARRAY_SIZE(leds_gpios));
-
 
 GPIOs mapped to IRQs
 --------------------
diff --git a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
index aeccff777170..0faf042001d2 100644
--- a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
+++ b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
@@ -208,8 +208,6 @@ GPIO 值的命令需要等待其信息排到队首才发送命令，再获得其
                 gpio_request()
 
         ## 	gpio_request_one()
-        ##	gpio_request_array()
-        ## 	gpio_free_array()
 
                 gpio_free()
 
@@ -272,14 +270,6 @@ gpio_request()前将这类细节配置好，例如使用引脚控制子系统的
 	 */
 	int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
 
-	/* 在单个函数中申请多个 GPIO
-	 */
-	int gpio_request_array(struct gpio *array, size_t num);
-
-	/* 在单个函数中释放多个 GPIO
-	 */
-	void gpio_free_array(struct gpio *array, size_t num);
-
 这里 'flags' 当前定义可指定以下属性:
 
 	* GPIOF_DIR_IN		- 配置方向为输入
@@ -317,12 +307,6 @@ gpio_request()前将这类细节配置好，例如使用引脚控制子系统的
 	if (err)
 		...
 
-	err = gpio_request_array(leds_gpios, ARRAY_SIZE(leds_gpios));
-	if (err)
-		...
-
-	gpio_free_array(leds_gpios, ARRAY_SIZE(leds_gpios));
-
 
 GPIO 映射到 IRQ
 ----------------
diff --git a/Documentation/translations/zh_TW/gpio.txt b/Documentation/translations/zh_TW/gpio.txt
index b9b48012c62e..77d69d381316 100644
--- a/Documentation/translations/zh_TW/gpio.txt
+++ b/Documentation/translations/zh_TW/gpio.txt
@@ -215,13 +215,10 @@ GPIO 值的命令需要等待其信息排到隊首才發送命令，再獲得其
 	gpio_request()
 
 ## 	gpio_request_one()
-##	gpio_request_array()
-## 	gpio_free_array()
 
 	gpio_free()
 
 
-
 聲明和釋放 GPIO
 ----------------------------
 爲了有助於捕獲系統配置錯誤,定義了兩個函數。
@@ -278,14 +275,6 @@ gpio_request()前將這類細節配置好，例如使用 pinctrl 子系統的映
 	 */
 	int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
 
-	/* 在單個函數中申請多個 GPIO
-	 */
-	int gpio_request_array(struct gpio *array, size_t num);
-
-	/* 在單個函數中釋放多個 GPIO
-	 */
-	void gpio_free_array(struct gpio *array, size_t num);
-
 這裡 'flags' 當前定義可指定以下屬性:
 
 	* GPIOF_DIR_IN		- 配置方向爲輸入
@@ -323,12 +312,6 @@ gpio_request()前將這類細節配置好，例如使用 pinctrl 子系統的映
 	if (err)
 		...
 
-	err = gpio_request_array(leds_gpios, ARRAY_SIZE(leds_gpios));
-	if (err)
-		...
-
-	gpio_free_array(leds_gpios, ARRAY_SIZE(leds_gpios));
-
 
 GPIO 映射到 IRQ
 --------------------
diff --git a/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst b/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst
index 56b975801b6a..6615d6ced755 100644
--- a/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst
+++ b/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst
@@ -81,7 +81,7 @@ Only one event clock flag, ``GPIO_V2_LINE_FLAG_EVENT_CLOCK_xxx``, may be set.
 If none are set then the event clock defaults to ``CLOCK_MONOTONIC``.
 The ``GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE`` flag requires supporting hardware
 and a kernel with ``CONFIG_HTE`` set.  Requesting HTE from a device that
-doesn't support it is an error (**EOPNOTSUP**).
+doesn't support it is an error (**EOPNOTSUPP**).
 
 The :c:type:`debounce_period_us<gpio_v2_line_attribute>` attribute may only
 be applied to lines with ``GPIO_V2_LINE_FLAG_INPUT`` set. When set, debounce
diff --git a/MAINTAINERS b/MAINTAINERS
index 8044df027531..9d7a488b188d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10936,6 +10936,7 @@ L:	linux-gpio@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git
 F:	drivers/gpio/gpio-elkhartlake.c
+F:	drivers/gpio/gpio-graniterapids.c
 F:	drivers/gpio/gpio-ich.c
 F:	drivers/gpio/gpio-merrifield.c
 F:	drivers/gpio/gpio-ml-ioh.c
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 8bc4ea51a0c1..03b4b347f11a 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -35,18 +35,20 @@
 
 static int spitz_last_ac_status;
 
-static struct gpio spitz_charger_gpios[] = {
-	{ SPITZ_GPIO_KEY_INT,	GPIOF_IN, "Keyboard Interrupt" },
-	{ SPITZ_GPIO_SYNC,	GPIOF_IN, "Sync" },
-	{ SPITZ_GPIO_AC_IN,     GPIOF_IN, "Charger Detection" },
-	{ SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
-	{ SPITZ_GPIO_JK_B,	  GPIOF_OUT_INIT_LOW, "JK B" },
-	{ SPITZ_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
-};
-
 static void spitz_charger_init(void)
 {
-	gpio_request_array(ARRAY_AND_SIZE(spitz_charger_gpios));
+	gpio_request(SPITZ_GPIO_KEY_INT, "Keyboard Interrupt");
+	gpio_direction_input(SPITZ_GPIO_KEY_INT);
+	gpio_request(SPITZ_GPIO_SYNC, "Sync");
+	gpio_direction_input(SPITZ_GPIO_SYNC);
+	gpio_request(SPITZ_GPIO_AC_IN, "Charger Detection");
+	gpio_direction_input(SPITZ_GPIO_AC_IN);
+	gpio_request(SPITZ_GPIO_ADC_TEMP_ON, "ADC Temp On");
+	gpio_direction_output(SPITZ_GPIO_ADC_TEMP_ON, 0);
+	gpio_request(SPITZ_GPIO_JK_B, "JK B");
+	gpio_direction_output(SPITZ_GPIO_JK_B, 0);
+	gpio_request(SPITZ_GPIO_CHRG_ON, "Charger On");
+	gpio_direction_output(SPITZ_GPIO_CHRG_ON, 0);
 }
 
 static void spitz_measure_temp(int on)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 5e25dfa752e9..1cfc0b1fa41c 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -20,16 +20,6 @@
 
 #include "generic.h"
 
-/*
- * helper for sa1100fb
- */
-static struct gpio h3600_lcd_gpio[] = {
-	{ H3XXX_EGPIO_LCD_ON,	GPIOF_OUT_INIT_LOW,	"LCD power" },
-	{ H3600_EGPIO_LCD_PCI,	GPIOF_OUT_INIT_LOW,	"LCD control" },
-	{ H3600_EGPIO_LCD_5V_ON, GPIOF_OUT_INIT_LOW,	"LCD 5v" },
-	{ H3600_EGPIO_LVDD_ON,	GPIOF_OUT_INIT_LOW,	"LCD 9v/-6.5v" },
-};
-
 static bool h3600_lcd_request(void)
 {
 	static bool h3600_lcd_ok;
@@ -38,7 +28,42 @@ static bool h3600_lcd_request(void)
 	if (h3600_lcd_ok)
 		return true;
 
-	rc = gpio_request_array(h3600_lcd_gpio, ARRAY_SIZE(h3600_lcd_gpio));
+	rc = gpio_request(H3XXX_EGPIO_LCD_ON, "LCD power");
+	if (rc)
+		goto out;
+	rc = gpio_direction_output(H3XXX_EGPIO_LCD_ON, 0);
+	if (rc)
+		goto out_free_on;
+	rc = gpio_request(H3600_EGPIO_LCD_PCI, "LCD control");
+	if (rc)
+		goto out_free_on;
+	rc = gpio_direction_output(H3600_EGPIO_LCD_PCI, 0);
+	if (rc)
+		goto out_free_pci;
+	rc = gpio_request(H3600_EGPIO_LCD_5V_ON, "LCD 5v");
+	if (rc)
+		goto out_free_pci;
+	rc = gpio_direction_output(H3600_EGPIO_LCD_5V_ON, 0);
+	if (rc)
+		goto out_free_5v_on;
+	rc = gpio_request(H3600_EGPIO_LVDD_ON, "LCD 9v/-6.5v");
+	if (rc)
+		goto out_free_5v_on;
+	rc = gpio_direction_output(H3600_EGPIO_LVDD_ON, 0);
+	if (rc)
+		goto out_free_lvdd_on;
+
+	goto out;
+
+out_free_lvdd_on:
+	gpio_free(H3600_EGPIO_LVDD_ON);
+out_free_5v_on:
+	gpio_free(H3600_EGPIO_LCD_5V_ON);
+out_free_pci:
+	gpio_free(H3600_EGPIO_LCD_PCI);
+out_free_on:
+	gpio_free(H3XXX_EGPIO_LCD_ON);
+out:
 	if (rc)
 		pr_err("%s: can't request GPIOs\n", __func__);
 	else
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 00b5c007a2bb..3dbddec07028 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -321,6 +321,24 @@ config GPIO_GENERIC_PLATFORM
 	help
 	  Say yes here to support basic platform_device memory-mapped GPIO controllers.
 
+config GPIO_GRANITERAPIDS
+	tristate "Intel Granite Rapids-D vGPIO support"
+	depends on X86 || COMPILE_TEST
+	select GPIOLIB_IRQCHIP
+	help
+	  Select this to enable virtual GPIO support on platforms with the
+	  following SoCs:
+
+	  - Intel Granite Rapids-D
+
+	  The driver enables basic GPIO functionality and implements interrupt
+	  support. The virtual GPIO driver controls GPIO lines via a firmware
+	  interface. The physical GPIO pins reside on device that is external
+	  from the main SoC package, such as a BMC or a CPLD.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called gpio-graniterapids.
+
 config GPIO_GRGPIO
 	tristate "Aeroflex Gaisler GRGPIO support"
 	depends on OF_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index fdd28c58d890..e2a53013780e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_GPIO_FTGPIO010)		+= gpio-ftgpio010.o
 obj-$(CONFIG_GPIO_FXL6408)		+= gpio-fxl6408.o
 obj-$(CONFIG_GPIO_GE_FPGA)		+= gpio-ge.o
 obj-$(CONFIG_GPIO_GPIO_MM)		+= gpio-gpio-mm.o
+obj-$(CONFIG_GPIO_GRANITERAPIDS)	+= gpio-graniterapids.o
 obj-$(CONFIG_GPIO_GRGPIO)		+= gpio-grgpio.o
 obj-$(CONFIG_GPIO_GW_PLD)		+= gpio-gw-pld.o
 obj-$(CONFIG_GPIO_HISI)                 += gpio-hisi.o
diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index a789af4a5c85..8dce78ea7139 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -50,7 +50,6 @@ struct brcmstb_gpio_priv {
 	struct irq_domain *irq_domain;
 	struct irq_chip irq_chip;
 	int parent_irq;
-	int gpio_base;
 	int num_gpios;
 	int parent_wake_irq;
 };
@@ -92,7 +91,7 @@ brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank)
 static int brcmstb_gpio_hwirq_to_offset(irq_hw_number_t hwirq,
 					struct brcmstb_gpio_bank *bank)
 {
-	return hwirq - (bank->gc.base - bank->parent_priv->gpio_base);
+	return hwirq - bank->gc.offset;
 }
 
 static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank,
@@ -118,7 +117,7 @@ static int brcmstb_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
 {
 	struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
 	/* gc_offset is relative to this gpio_chip; want real offset */
-	int hwirq = offset + (gc->base - priv->gpio_base);
+	int hwirq = offset + gc->offset;
 
 	if (hwirq >= priv->num_gpios)
 		return -ENXIO;
@@ -263,7 +262,7 @@ static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank)
 {
 	struct brcmstb_gpio_priv *priv = bank->parent_priv;
 	struct irq_domain *domain = priv->irq_domain;
-	int hwbase = bank->gc.base - priv->gpio_base;
+	int hwbase = bank->gc.offset;
 	unsigned long status;
 
 	while ((status = brcmstb_gpio_get_active_irqs(bank))) {
@@ -412,7 +411,7 @@ static int brcmstb_gpio_of_xlate(struct gpio_chip *gc,
 	if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
 		return -EINVAL;
 
-	offset = gpiospec->args[0] - (gc->base - priv->gpio_base);
+	offset = gpiospec->args[0] - bank->gc.offset;
 	if (offset >= gc->ngpio || offset < 0)
 		return -EINVAL;
 
@@ -596,8 +595,8 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
 	const __be32 *p;
 	u32 bank_width;
 	int num_banks = 0;
+	int num_gpios = 0;
 	int err;
-	static int gpio_base;
 	unsigned long flags = 0;
 	bool need_wakeup_event = false;
 
@@ -611,7 +610,6 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
 	if (IS_ERR(reg_base))
 		return PTR_ERR(reg_base);
 
-	priv->gpio_base = gpio_base;
 	priv->reg_base = reg_base;
 	priv->pdev = pdev;
 
@@ -651,7 +649,7 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
 			dev_dbg(dev, "Width 0 found: Empty bank @ %d\n",
 				num_banks);
 			num_banks++;
-			gpio_base += MAX_GPIO_PER_BANK;
+			num_gpios += MAX_GPIO_PER_BANK;
 			continue;
 		}
 
@@ -691,12 +689,13 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
 			err = -ENOMEM;
 			goto fail;
 		}
-		gc->base = gpio_base;
 		gc->of_gpio_n_cells = 2;
 		gc->of_xlate = brcmstb_gpio_of_xlate;
 		/* not all ngpio lines are valid, will use bank width later */
 		gc->ngpio = MAX_GPIO_PER_BANK;
 		gc->offset = bank->id * MAX_GPIO_PER_BANK;
+		gc->request = gpiochip_generic_request;
+		gc->free = gpiochip_generic_free;
 		if (priv->parent_irq > 0)
 			gc->to_irq = brcmstb_gpio_to_irq;
 
@@ -713,7 +712,7 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
 					bank->id);
 			goto fail;
 		}
-		gpio_base += gc->ngpio;
+		num_gpios += gc->ngpio;
 
 		dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id,
 			gc->base, gc->ngpio, bank->width);
@@ -724,7 +723,7 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
 		num_banks++;
 	}
 
-	priv->num_gpios = gpio_base - priv->gpio_base;
+	priv->num_gpios = num_gpios;
 	if (priv->parent_irq > 0) {
 		err = brcmstb_gpio_irq_setup(pdev, priv);
 		if (err)
diff --git a/drivers/gpio/gpio-cros-ec.c b/drivers/gpio/gpio-cros-ec.c
index 842e1c060414..0c09bb54dc0c 100644
--- a/drivers/gpio/gpio-cros-ec.c
+++ b/drivers/gpio/gpio-cros-ec.c
@@ -12,6 +12,7 @@
 #include <linux/errno.h>
 #include <linux/gpio/driver.h>
 #include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/platform_data/cros_ec_commands.h>
 #include <linux/platform_data/cros_ec_proto.h>
@@ -197,11 +198,18 @@ static int cros_ec_gpio_probe(struct platform_device *pdev)
 	return devm_gpiochip_add_data(dev, gc, cros_ec);
 }
 
+static const struct platform_device_id cros_ec_gpio_id[] = {
+	{ "cros-ec-gpio", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, cros_ec_gpio_id);
+
 static struct platform_driver cros_ec_gpio_driver = {
 	.probe = cros_ec_gpio_probe,
 	.driver = {
 		.name = "cros-ec-gpio",
 	},
+	.id_table = cros_ec_gpio_id,
 };
 module_platform_driver(cros_ec_gpio_driver);
 
diff --git a/drivers/gpio/gpio-graniterapids.c b/drivers/gpio/gpio-graniterapids.c
new file mode 100644
index 000000000000..c693fe05d50f
--- /dev/null
+++ b/drivers/gpio/gpio-graniterapids.c
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Granite Rapids-D vGPIO driver
+ *
+ * Copyright (c) 2024, Intel Corporation.
+ *
+ * Author: Aapo Vienamo <aapo.vienamo@linux.intel.com>
+ */
+
+#include <linux/array_size.h>
+#include <linux/bitfield.h>
+#include <linux/bitmap.h>
+#include <linux/cleanup.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gfp_types.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/math.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/overflow.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <linux/gpio/driver.h>
+
+#define GNR_NUM_PINS 128
+#define GNR_PINS_PER_REG 32
+#define GNR_NUM_REGS DIV_ROUND_UP(GNR_NUM_PINS, GNR_PINS_PER_REG)
+
+#define GNR_CFG_BAR		0x00
+#define GNR_CFG_LOCK_OFFSET	0x04
+#define GNR_GPI_STATUS_OFFSET	0x20
+#define GNR_GPI_ENABLE_OFFSET	0x24
+
+#define GNR_CFG_DW_RX_MASK	GENMASK(25, 22)
+#define GNR_CFG_DW_RX_DISABLE	FIELD_PREP(GNR_CFG_DW_RX_MASK, 2)
+#define GNR_CFG_DW_RX_EDGE	FIELD_PREP(GNR_CFG_DW_RX_MASK, 1)
+#define GNR_CFG_DW_RX_LEVEL	FIELD_PREP(GNR_CFG_DW_RX_MASK, 0)
+#define GNR_CFG_DW_RXDIS	BIT(4)
+#define GNR_CFG_DW_TXDIS	BIT(3)
+#define GNR_CFG_DW_RXSTATE	BIT(1)
+#define GNR_CFG_DW_TXSTATE	BIT(0)
+
+/**
+ * struct gnr_gpio - Intel Granite Rapids-D vGPIO driver state
+ * @gc: GPIO controller interface
+ * @reg_base: base address of the GPIO registers
+ * @ro_bitmap: bitmap of read-only pins
+ * @lock: guard the registers
+ * @pad_backup: backup of the register state for suspend
+ */
+struct gnr_gpio {
+	struct gpio_chip gc;
+	void __iomem *reg_base;
+	DECLARE_BITMAP(ro_bitmap, GNR_NUM_PINS);
+	raw_spinlock_t lock;
+	u32 pad_backup[];
+};
+
+static void __iomem *gnr_gpio_get_padcfg_addr(const struct gnr_gpio *priv,
+					      unsigned int gpio)
+{
+	return priv->reg_base + gpio * sizeof(u32);
+}
+
+static int gnr_gpio_configure_line(struct gpio_chip *gc, unsigned int gpio,
+				   u32 clear_mask, u32 set_mask)
+{
+	struct gnr_gpio *priv = gpiochip_get_data(gc);
+	void __iomem *addr = gnr_gpio_get_padcfg_addr(priv, gpio);
+	u32 dw;
+
+	if (test_bit(gpio, priv->ro_bitmap))
+		return -EACCES;
+
+	guard(raw_spinlock_irqsave)(&priv->lock);
+
+	dw = readl(addr);
+	dw &= ~clear_mask;
+	dw |= set_mask;
+	writel(dw, addr);
+
+	return 0;
+}
+
+static int gnr_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	const struct gnr_gpio *priv = gpiochip_get_data(gc);
+	u32 dw;
+
+	dw = readl(gnr_gpio_get_padcfg_addr(priv, gpio));
+
+	return !!(dw & GNR_CFG_DW_RXSTATE);
+}
+
+static void gnr_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	u32 clear = 0;
+	u32 set = 0;
+
+	if (value)
+		set = GNR_CFG_DW_TXSTATE;
+	else
+		clear = GNR_CFG_DW_TXSTATE;
+
+	gnr_gpio_configure_line(gc, gpio, clear, set);
+}
+
+static int gnr_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct gnr_gpio *priv = gpiochip_get_data(gc);
+	u32 dw;
+
+	dw = readl(gnr_gpio_get_padcfg_addr(priv, gpio));
+
+	if (dw & GNR_CFG_DW_TXDIS)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int gnr_gpio_direction_input(struct gpio_chip *gc, unsigned int gpio)
+{
+	return gnr_gpio_configure_line(gc, gpio, GNR_CFG_DW_RXDIS, 0);
+}
+
+static int gnr_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	u32 clear = GNR_CFG_DW_TXDIS;
+	u32 set = value ?