Merge tag 'spi-fix-v4.10-rc4' into spi-linus

spi: Fixes for v4.10

The usual small smattering of driver specific fixes.  A few bits that
stand out here:

 - The R-Car patches adding fallbacks are just adding new compatible
   strings to the driver so that device trees are written in a more
   robustly future proof fashion, this isn't strictly a fix but it's
   just new IDs and it's better to get it into mainline sooner to
   improve the ABI.
 - The DesignWare "switch to new API part 2" patch is actually a
   misleadingly titled fix for a bit that got missed in the original
   conversion.

# gpg: Signature made Thu 19 Jan 2017 14:54:15 GMT
# gpg:                using RSA key ADE668AA675718B59FE29FEA24D68B725D5487D0
# gpg:                issuer "broonie@kernel.org"
# gpg: key 0D9EACE2CD7BEEBC: no public key for trusted key - skipped
# gpg: key 0D9EACE2CD7BEEBC marked as ultimately trusted
# gpg: key CCB0A420AF88CD16: no public key for trusted key - skipped
# gpg: key CCB0A420AF88CD16 marked as ultimately trusted
# gpg: key 162614E316005C11: no public key for trusted key - skipped
# gpg: key 162614E316005C11 marked as ultimately trusted
# gpg: key A730C53A5621E907: no public key for trusted key - skipped
# gpg: key A730C53A5621E907 marked as ultimately trusted
# gpg: key 276568D75C6153AD: no public key for trusted key - skipped
# gpg: key 276568D75C6153AD marked as ultimately trusted
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" [ultimate]
# gpg:                 aka "Mark Brown <broonie@debian.org>" [ultimate]
# gpg:                 aka "Mark Brown <broonie@kernel.org>" [ultimate]
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>" [ultimate]
# gpg:                 aka "Mark Brown <broonie@linaro.org>" [ultimate]
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>" [ultimate]

34 files changed, 2640 insertions, 628 deletions

diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
index aa005c1d10d9..dc975064fa27 100644
--- a/Documentation/devicetree/bindings/spi/sh-msiof.txt
+++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -1,16 +1,23 @@
 Renesas MSIOF spi controller
 
 Required properties:
-- compatible           : "renesas,msiof-<soctype>" for SoCs,
-			 "renesas,sh-msiof" for SuperH, or
-			 "renesas,sh-mobile-msiof" for SH Mobile series.
-			 Examples with soctypes are:
-			 "renesas,msiof-r8a7790" (R-Car H2)
+- compatible           : "renesas,msiof-r8a7790" (R-Car H2)
 			 "renesas,msiof-r8a7791" (R-Car M2-W)
 			 "renesas,msiof-r8a7792" (R-Car V2H)
 			 "renesas,msiof-r8a7793" (R-Car M2-N)
 			 "renesas,msiof-r8a7794" (R-Car E2)
+			 "renesas,msiof-r8a7796" (R-Car M3-W)
 			 "renesas,msiof-sh73a0" (SH-Mobile AG5)
+			 "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device)
+			 "renesas,rcar-gen2-msiof" (generic R-Car Gen2 compatible device)
+			 "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device)
+			 "renesas,sh-msiof"      (deprecated)
+
+			 When compatible with the generic version, nodes
+			 must list the SoC-specific version corresponding
+			 to the platform first followed by the generic
+			 version.
+
 - reg                  : A list of offsets and lengths of the register sets for
 			 the device.
 			 If only one register set is present, it is to be used
@@ -60,7 +67,8 @@ Documentation/devicetree/bindings/pinctrl/renesas,*.
 Example:
 
 	msiof0: spi@e6e20000 {
-		compatible = "renesas,msiof-r8a7791";
+		compatible = "renesas,msiof-r8a7791",
+			     "renesas,rcar-gen2-msiof";
 		reg = <0 0xe6e20000 0 0x0064>;
 		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
diff --git a/Documentation/devicetree/bindings/spi/spi-armada-3700.txt b/Documentation/devicetree/bindings/spi/spi-armada-3700.txt
new file mode 100644
index 000000000000..1564aa8c02cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-armada-3700.txt
@@ -0,0 +1,25 @@
+* Marvell Armada 3700 SPI Controller
+
+Required Properties:
+
+- compatible: should be "marvell,armada-3700-spi"
+- reg: physical base address of the controller and length of memory mapped
+       region.
+- interrupts: The interrupt number. The interrupt specifier format depends on
+	      the interrupt controller and of its driver.
+- clocks: Must contain the clock source, usually from the North Bridge clocks.
+- num-cs: The number of chip selects that is supported by this SPI Controller
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Example:
+
+	spi0: spi@10600 {
+		compatible = "marvell,armada-3700-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10600 0x5d>;
+		clocks = <&nb_perih_clk 7>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		num-cs = <4>;
+	};
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
new file mode 100644
index 000000000000..225ace1d0c65
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
@@ -0,0 +1,19 @@
+* Freescale Low Power SPI (LPSPI) for i.MX
+
+Required properties:
+- compatible :
+  - "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc
+- reg : address and length of the lpspi master registers
+- interrupt-parent : core interrupt controller
+- interrupts : lpspi interrupt
+- clocks : lpspi clock specifier
+
+Examples:
+
+lpspi2: lpspi@40290000 {
+	compatible = "fsl,imx7ulp-spi";
+	reg = <0x40290000 0x10000>;
+	interrupt-parent = <&intc>;
+	interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks IMX7ULP_CLK_LPSPI2>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
index 21de73db6a05..2ec99b86b622 100644
--- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt
+++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
@@ -1,7 +1,7 @@
-Allwinner A31 SPI controller
+Allwinner A31/H3 SPI controller
 
 Required properties:
-- compatible: Should be "allwinner,sun6i-a31-spi".
+- compatible: Should be "allwinner,sun6i-a31-spi" or "allwinner,sun8i-h3-spi".
 - reg: Should contain register location and length.
 - interrupts: Should contain interrupt.
 - clocks: phandle to the clocks feeding the SPI controller. Two are
@@ -12,6 +12,11 @@ Required properties:
 - resets: phandle to the reset controller asserting this device in
           reset
 
+Optional properties:
+- dmas: DMA specifiers for rx and tx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "rx" and "tx" if present.
+
 Example:
 
 spi1: spi@01c69000 {
@@ -22,3 +27,19 @@ spi1: spi@01c69000 {
 	clock-names = "ahb", "mod";
 	resets = <&ahb1_rst 21>;
 };
+
+spi0: spi@01c68000 {
+	compatible = "allwinner,sun8i-h3-spi";
+	reg = <0x01c68000 0x1000>;
+	interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+	clock-names = "ahb", "mod";
+	dmas = <&dma 23>, <&dma 23>;
+	dma-names = "rx", "tx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	resets = <&ccu RST_BUS_SPI0>;
+	status = "disabled";
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index b7995474148c..2922a9908302 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -67,6 +67,13 @@ config SPI_ATH79
 	  This enables support for the SPI controller present on the
 	  Atheros AR71XX/AR724X/AR913X SoCs.
 
+config SPI_ARMADA_3700
+	tristate "Marvell Armada 3700 SPI Controller"
+	depends on (ARCH_MVEBU && OF) || COMPILE_TEST
+	help
+	  This enables support for the SPI controller present on the
+	  Marvell Armada 3700 SoCs.
+
 config SPI_ATMEL
 	tristate "Atmel SPI Controller"
 	depends on HAS_DMA
@@ -264,6 +271,12 @@ config SPI_FALCON
 	  has only been tested with m25p80 type chips. The hardware has no
 	  support for other types of SPI peripherals.
 
+config SPI_FSL_LPSPI
+	tristate "Freescale i.MX LPSPI controller"
+	depends on ARCH_MXC || COMPILE_TEST
+	help
+	  This enables Freescale i.MX LPSPI controllers in master mode.
+
 config SPI_GPIO
 	tristate "GPIO-based bitbanging SPI Master"
 	depends on GPIOLIB || COMPILE_TEST
@@ -365,6 +378,7 @@ config SPI_FSL_SPI
 config SPI_FSL_DSPI
 	tristate "Freescale DSPI controller"
 	select REGMAP_MMIO
+	depends on HAS_DMA
 	depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
 	help
 	  This enables support for the Freescale DSPI controller in master
@@ -373,7 +387,6 @@ config SPI_FSL_DSPI
 config SPI_FSL_ESPI
 	tristate "Freescale eSPI controller"
 	depends on FSL_SOC
-	select SPI_FSL_LIB
 	help
 	  This enables using the Freescale eSPI controllers in master mode.
 	  From MPC8536, 85xx platform uses the controller, and all P10xx,
@@ -451,7 +464,8 @@ config SPI_ORION
 	tristate "Orion SPI master"
 	depends on PLAT_ORION || ARCH_MVEBU || COMPILE_TEST
 	help
-	  This enables using the SPI master controller on the Orion chips.
+	  This enables using the SPI master controller on the Orion
+	  and MVEBU chips.
 
 config SPI_PIC32
 	tristate "Microchip PIC32 series SPI"
@@ -553,7 +567,7 @@ config SPI_S3C24XX_FIQ
 
 config SPI_S3C64XX
 	tristate "Samsung S3C64XX series type SPI"
-	depends on (PLAT_SAMSUNG || ARCH_EXYNOS)
+	depends on (PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST)
 	help
 	  SPI driver for Samsung S3C64XX and newer SoCs.
 
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index aa939d955521..7a6b64662c82 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_LOOPBACK_TEST)		+= spi-loopback-test.o
 
 # SPI master controller drivers (bus)
 obj-$(CONFIG_SPI_ALTERA)		+= spi-altera.o
+obj-$(CONFIG_SPI_ARMADA_3700)		+= spi-armada-3700.o
 obj-$(CONFIG_SPI_ATMEL)			+= spi-atmel.o
 obj-$(CONFIG_SPI_ATH79)			+= spi-ath79.o
 obj-$(CONFIG_SPI_AU1550)		+= spi-au1550.o
@@ -43,6 +44,7 @@ obj-$(CONFIG_SPI_FSL_CPM)		+= spi-fsl-cpm.o
 obj-$(CONFIG_SPI_FSL_DSPI)		+= spi-fsl-dspi.o
 obj-$(CONFIG_SPI_FSL_LIB)		+= spi-fsl-lib.o
 obj-$(CONFIG_SPI_FSL_ESPI)		+= spi-fsl-espi.o
+obj-$(CONFIG_SPI_FSL_LPSPI)		+= spi-fsl-lpspi.o
 obj-$(CONFIG_SPI_FSL_SPI)		+= spi-fsl-spi.o
 obj-$(CONFIG_SPI_GPIO)			+= spi-gpio.o
 obj-$(CONFIG_SPI_IMG_SPFI)		+= spi-img-spfi.o
diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c
new file mode 100644
index 000000000000..0314c6b9e044
--- /dev/null
+++ b/drivers/spi/spi-armada-3700.c
@@ -0,0 +1,924 @@
+/*
+ * Marvell Armada-3700 SPI controller driver
+ *
+ * Copyright (C) 2016 Marvell Ltd.
+ *
+ * Author: Wilson Ding <dingwei@marvell.com>
+ * Author: Romain Perier <romain.perier@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/spi/spi.h>
+
+#define DRIVER_NAME			"armada_3700_spi"
+
+#define A3700_SPI_TIMEOUT		10
+
+/* SPI Register Offest */
+#define A3700_SPI_IF_CTRL_REG		0x00
+#define A3700_SPI_IF_CFG_REG		0x04
+#define A3700_SPI_DATA_OUT_REG		0x08
+#define A3700_SPI_DATA_IN_REG		0x0C
+#define A3700_SPI_IF_INST_REG		0x10
+#define A3700_SPI_IF_ADDR_REG		0x14
+#define A3700_SPI_IF_RMODE_REG		0x18
+#define A3700_SPI_IF_HDR_CNT_REG	0x1C
+#define A3700_SPI_IF_DIN_CNT_REG	0x20
+#define A3700_SPI_IF_TIME_REG		0x24
+#define A3700_SPI_INT_STAT_REG		0x28
+#define A3700_SPI_INT_MASK_REG		0x2C
+
+/* A3700_SPI_IF_CTRL_REG */
+#define A3700_SPI_EN			BIT(16)
+#define A3700_SPI_ADDR_NOT_CONFIG	BIT(12)
+#define A3700_SPI_WFIFO_OVERFLOW	BIT(11)
+#define A3700_SPI_WFIFO_UNDERFLOW	BIT(10)
+#define A3700_SPI_RFIFO_OVERFLOW	BIT(9)
+#define A3700_SPI_RFIFO_UNDERFLOW	BIT(8)
+#define A3700_SPI_WFIFO_FULL		BIT(7)
+#define A3700_SPI_WFIFO_EMPTY		BIT(6)
+#define A3700_SPI_RFIFO_FULL		BIT(5)
+#define A3700_SPI_RFIFO_EMPTY		BIT(4)
+#define A3700_SPI_WFIFO_RDY		BIT(3)
+#define A3700_SPI_RFIFO_RDY		BIT(2)
+#define A3700_SPI_XFER_RDY		BIT(1)
+#define A3700_SPI_XFER_DONE		BIT(0)
+
+/* A3700_SPI_IF_CFG_REG */
+#define A3700_SPI_WFIFO_THRS		BIT(28)
+#define A3700_SPI_RFIFO_THRS		BIT(24)
+#define A3700_SPI_AUTO_CS		BIT(20)
+#define A3700_SPI_DMA_RD_EN		BIT(18)
+#define A3700_SPI_FIFO_MODE		BIT(17)
+#define A3700_SPI_SRST			BIT(16)
+#define A3700_SPI_XFER_START		BIT(15)
+#define A3700_SPI_XFER_STOP		BIT(14)
+#define A3700_SPI_INST_PIN		BIT(13)
+#define A3700_SPI_ADDR_PIN		BIT(12)
+#define A3700_SPI_DATA_PIN1		BIT(11)
+#define A3700_SPI_DATA_PIN0		BIT(10)
+#define A3700_SPI_FIFO_FLUSH		BIT(9)
+#define A3700_SPI_RW_EN			BIT(8)
+#define A3700_SPI_CLK_POL		BIT(7)
+#define A3700_SPI_CLK_PHA		BIT(6)
+#define A3700_SPI_BYTE_LEN		BIT(5)
+#define A3700_SPI_CLK_PRESCALE		BIT(0)
+#define A3700_SPI_CLK_PRESCALE_MASK	(0x1f)
+
+#define A3700_SPI_WFIFO_THRS_BIT	28
+#define A3700_SPI_RFIFO_THRS_BIT	24
+#define A3700_SPI_FIFO_THRS_MASK	0x7
+
+#define A3700_SPI_DATA_PIN_MASK		0x3
+
+/* A3700_SPI_IF_HDR_CNT_REG */
+#define A3700_SPI_DUMMY_CNT_BIT		12
+#define A3700_SPI_DUMMY_CNT_MASK	0x7
+#define A3700_SPI_RMODE_CNT_BIT		8
+#define A3700_SPI_RMODE_CNT_MASK	0x3
+#define A3700_SPI_ADDR_CNT_BIT		4
+#define A3700_SPI_ADDR_CNT_MASK		0x7
+#define A3700_SPI_INSTR_CNT_BIT		0
+#define A3700_SPI_INSTR_CNT_MASK	0x3
+
+/* A3700_SPI_IF_TIME_REG */
+#define A3700_SPI_CLK_CAPT_EDGE		BIT(7)
+
+/* Flags and macros for struct a3700_spi */
+#define A3700_INSTR_CNT			1
+#define A3700_ADDR_CNT			3
+#define A3700_DUMMY_CNT			1
+
+struct a3700_spi {
+	struct spi_master *master;
+	void __iomem *base;
+	struct clk *clk;
+	unsigned int irq;
+	unsigned int flags;
+	bool xmit_data;
+	const u8 *tx_buf;
+	u8 *rx_buf;
+	size_t buf_len;
+	u8 byte_len;
+	u32 wait_mask;
+	struct completion done;
+	u32 addr_cnt;
+	u32 instr_cnt;
+	size_t hdr_cnt;
+};
+
+static u32 spireg_read(struct a3700_spi *a3700_spi, u32 offset)
+{
+	return readl(a3700_spi->base + offset);
+}
+
+static void spireg_write(struct a3700_spi *a3700_spi, u32 offset, u32 data)
+{
+	writel(data, a3700_spi->base + offset);
+}
+
+static void a3700_spi_auto_cs_unset(struct a3700_spi *a3700_spi)
+{
+	u32 val;
+
+	val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
+	val &= ~A3700_SPI_AUTO_CS;
+	spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
+}
+
+static void a3700_spi_activate_cs(struct a3700_spi *a3700_spi, unsigned int cs)
+{
+	u32 val;
+
+	val = spireg_read(a3700_spi, A3700_SPI_IF_CTRL_REG);
+	val |= (A3700_SPI_EN << cs);
+	spireg_write(a3700_spi, A3700_SPI_IF_CTRL_REG, val);
+}
+
+static void a3700_spi_deactivate_cs(struct a3700_spi *a3700_spi,
+				    unsigned int cs)
+{
+	u32 val;
+
+	val = spireg_read(a3700_spi, A3700_SPI_IF_CTRL_REG);
+	val &= ~(A3700_SPI_EN << cs);
+	spireg_write(a3700_spi, A3700_SPI_IF_CTRL_REG, val);
+}
+
+static int a3700_spi_pin_mode_set(struct a3700_spi *a3700_spi,
+				  unsigned int pin_mode)
+{
+	u32 val;
+
+	val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
+	val &= ~(A3700_SPI_INST_PIN | A3700_SPI_ADDR_PIN);
+	val &= ~(A3700_SPI_DATA_PIN0 | A3700_SPI_DATA_PIN1);
+
+	switch (pin_mode) {
+	case 1:
+		break;
+	case 2:
+		val |= A3700_SPI_DATA_PIN0;
+		break;
+	case 4:
+		val |= A3700_SPI_DATA_PIN1;
+		break;
+	default:
+		dev_err(&a3700_spi->master->dev, "wrong pin mode %u", pin_mode);
+		return -EINVAL;
+	}
+
+	spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
+
+	return 0;
+}
+
+static void a3700_spi_fifo_mode_set(struct a3700_spi *a3700_spi)
+{
+	u32 val;
+
+	val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
+	val |= A3700_SPI_FIFO_MODE;
+	spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
+}
+
+static void a3700_spi_mode_set(struct a3700_spi *a3700_spi,
+			       unsigned int mode_bits)
+{
+	u32 val;
+
+	val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
+
+	if (mode_bits & SPI_CPOL)
+		val |= A3700_SPI_CLK_POL;
+	else
+		val &= ~A3700_SPI_CLK_POL;
+
+	if (mode_bits & SPI_CPHA)
+		val |= A3700_SPI_CLK_PHA;
+	else
+		val &= ~A3700_SPI_CLK_PHA;
+
+	spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
+}
+
+static void a3700_spi_clock_set(struct a3700_spi *a3700_spi,
+				unsigned int speed_hz, u16 mode)
+{
+	u32 val;
+	u32 prescale;
+
+	prescale = DIV_ROUND_UP(clk_get_rate(a3700_spi->clk), speed_hz);
+
+	val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
+	val = val & ~A3700_SPI_CLK_PRESCALE_MASK;
+
+	val = val | (prescale & A3700_SPI_CLK_PRESCALE_MASK);
+	spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
+
+	if (prescale <= 2) {
+		val = spireg_read(a3700_spi, A3700_SPI_IF_TIME_REG);
+		val |= A3700_SPI_CLK_CAPT_EDGE;
+		spireg_write(a3700_spi, A3700_SPI_IF_TIME_REG, val);
+	}
+
+	val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
+	val &= ~(A3700_SPI_CLK_POL | A3700_SPI_CLK_PHA);
+
+	if (mode & SPI_CPOL)
+		val |= A3700_SPI_CLK_POL;
+
+	if (mode & SPI_CPHA)
+		val |= A3700_SPI_CLK_PHA;
+
+	spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
+}
+
+static void a3700_spi_bytelen_set(struct a3700_spi *a3700_spi, unsigned int len)
+{
+	u32 val;
+
+	val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
+	if (len == 4)
+		val |= A3700_SPI_BYTE_LEN;
+	else
+		val &= ~A3700_SPI_BYTE_LEN;
+	spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
+
+	a3700_spi->byte_len = len;
+}
+
+static int a3700_spi_fifo_flush(struct a3700_spi *a3700_spi)
+{
+	int timeout = A3700_SPI_TIMEOUT;
+	u32 val;
+
+	val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
+	val |= A3700_SPI_FIFO_FLUSH;
+	spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
+
+	while (--timeout) {
+		val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
+		if (!(val & A3700_SPI_FIFO_FLUSH))
+			return 0;
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int a3700_spi_init(struct a3700_spi *a3700_spi)
+{
+	struct spi_master *master = a3700_spi->master;
+	u32 val;
+	int i, ret = 0;
+
+	/* Reset SPI unit */
+	val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
+	val |= A3700_SPI_SRST;
+	spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
+
+	udelay(A3700_SPI_TIMEOUT);
+
+	val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
+	val &= ~A3700_SPI_SRST;
+	spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
+
+	/* Disable AUTO_CS and deactivate all chip-selects */
+	a3700_spi_auto_cs_unset(a3700_spi);
+	for (i = 0; i < master->num_chipselect; i++)
+		a3700_spi_deactivate_cs(a3700_spi, i);
+
+	/* Enable FIFO mode */
+	a3700_spi_fifo_mode_set(a3700_spi);
+
+	/* Set SPI mode */
+	a3700_spi_mode_set(a3700_spi, master->mode_bits);
+
+	/* Reset counters */
+	spireg_write(a3700_spi, A3700_SPI_IF_HDR_CNT_REG, 0);
+	spireg_write(a3700_spi, A3700_SPI_IF_DIN_CNT_REG, 0);
+
+	/* Mask the interrupts and clear cause bits */
+	spireg_write(a3700_spi, A3700_SPI_INT_MASK_REG, 0);
+	spireg_write(a3700_spi, A3700_SPI_INT_STAT_REG, ~0U);
+
+	return ret;
+}
+
+static irqreturn_t a3700_spi_interrupt(int irq, void *dev_id)
+{
+	struct spi_master *master = dev_id;
+	struct a3700_spi *a3700_spi;
+	u32 cause;
+
+	a3700_spi = spi_master_get_devdata(master);
+
+	/* Get interrupt causes */
+	cause = spireg_read(a3700_spi, A3700_SPI_INT_STAT_REG);
+
+	if (!cause || !(a3700_spi->wait_mask & cause))
+		return IRQ_NONE;
+
+	/* mask and acknowledge the SPI interrupts */
+	spireg_write(a3700_spi, A3700_SPI_INT_MASK_REG, 0);
+	spireg_write(a3700_spi, A3700_SPI_INT_STAT_REG, cause);
+
+	/* Wake up the transfer */
+	if (a3700_spi->wait_mask & cause)
+		complete(&a3700_spi->done);
+
+	return IRQ_HANDLED;
+}
+
+static bool a3700_spi_wait_completion(struct spi_device *spi)
+{
+	struct a3700_spi *a3700_spi;
+	unsigned int timeout;
+	unsigned int ctrl_reg;
+	unsigned long timeout_jiffies;
+
+	a3700_spi = spi_master_get_devdata(spi->master);
+
+	/* SPI interrupt is edge-triggered, which means an interrupt will
+	 * be generated only when detecting a specific status bit changed
+	 * from '0' to '1'. So when we start waiting for a interrupt, we
+	 * need to check status bit in control reg first, if it is already 1,
+	 * then we do not need to wait for interrupt
+	 */
+	ctrl_reg = spireg_read(a3700_spi, A3700_SPI_IF_CTRL_REG);
+	if (a3700_spi->wait_mask & ctrl_reg)
+		return true;
+
+	reinit_completion(&a3700_spi->done);
+
+	spireg_write(a3700_spi, A3700_SPI_INT_MASK_REG,
+		     a3700_spi->wait_mask);
+
+	timeout_jiffies = msecs_to_jiffies(A3700_SPI_TIMEOUT);
+	timeout = wait_for_completion_timeout(&a3700_spi->done,
+					      timeout_jiffies);
+
+	a3700_spi->wait_mask = 0;
+
+	if (timeout)
+		return true;
+
+	/* there might be the case that right after we checked the
+	 * status bits in this routine and before start to wait for
+	 * interrupt by wait_for_completion_timeout, the interrupt
+	 * happens, to avoid missing it we need to double check
+	 * status bits in control reg, if it is already 1, then
+	 * consider that we have the interrupt successfully and
+	 * return true.
+	 */
+	ctrl_reg = spireg_read(a3700_spi, A3700_SPI_IF_CTRL_REG);
+	if (a3700_spi->wait_mask & ctrl_reg)
+		return true;
+
+	spireg_write(a3700_spi, A3700_SPI_INT_MASK_REG, 0);
+
+	return true;
+}
+
+static bool a3700_spi_transfer_wait(struct spi_device *spi,
+				    unsigned int bit_mask)
+{
+	struct a3700_spi *a3700_spi;
+
+	a3700_spi = spi_master_get_devdata(spi->master);
+	a3700_spi->wait_mask = bit_mask;
+
+	return a3700_spi_wait_completion(spi);
+}
+
+static void a3700_spi_fifo_thres_set(struct a3700_spi *a3700_spi,
+				     unsigned int bytes)
+{
+	u32 val;
+
+	val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
+	val &= ~(A3700_SPI_FIFO_THRS_MASK << A3700_SPI_RFIFO_THRS_BIT);
+	val |= (bytes - 1) << A3700_SPI_RFIFO_THRS_BIT;
+	val &= ~(A3700_SPI_FIFO_THRS_MASK << A3700_SPI_WFIFO_THRS_BIT);
+	val |= (7 - bytes) << A3700_SPI_WFIFO_THRS_BIT;
+	spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
+}
+
+static void a3700_spi_transfer_setup(struct spi_device *spi,
+				    struct spi_transfer *xfer)
+{
+	struct a3700_spi *a3700_spi;
+	unsigned int byte_len;
+
+	a3700_spi = spi_master_get_devdata(spi->master);
+
+	a3700_spi_clock_set(a3700_spi, xfer->speed_hz, spi->mode);
+
+	byte_len = xfer->bits_per_word >> 3;
+
+	a3700_spi_fifo_thres_set(a3700_spi, byte_len);
+}
+
+static void a3700_spi_set_cs(struct spi_device *spi, bool enable)
+{
+	struct a3700_spi *a3700_spi = spi_master_get_devdata(spi->master);
+
+	if (!enable)
+		a3700_spi_activate_cs(a3700_spi, spi->chip_select);
+	else
+		a3700_spi_deactivate_cs(a3700_spi, spi->chip_select);
+}
+
+static void a3700_spi_header_set(struct a3700_spi *a3700_spi)
+{
+	u32 instr_cnt = 0, addr_cnt = 0, dummy_cnt = 0;
+	u32 val = 0;
+
+	/* Clear the header registers */
+	spireg_write(a3700_spi, A3700_SPI_IF_INST_REG, 0);
+	spireg_write(a3700_spi, A3700_SPI_IF_ADDR_REG, 0);
+	spireg_write(a3700_spi, A3700_SPI_IF_RMODE_REG, 0);
+
+	/* Set header counters */
+	if (a3700_spi->tx_buf) {
+		if (a3700_spi->buf_len <= a3700_spi->instr_cnt) {
+			instr_cnt = a3700_spi->buf_len;
+		} else if (a3700_spi->buf_len <= (a3700_spi->instr_cnt +
+						  a3700_spi->addr_cnt)) {
+			instr_cnt = a3700_spi->instr_cnt;
+			addr_cnt = a3700_spi->buf_len - instr_cnt;
+		} else if (a3700_spi->buf_len <= a3700_spi->hdr_cnt) {
+			instr_cnt = a3700_spi->instr_cnt;
+			addr_cnt = a3700_spi->addr_cnt;
+			/* Need to handle the normal write case with 1 byte
+			 * data
+			 */
+			if (!a3700_spi->tx_buf[instr_cnt + addr_cnt])
+				dummy_cnt = a3700_spi->buf_len - instr_cnt -
+					    addr_cnt;
+		}
+		val |= ((instr_cnt & A3700_SPI_INSTR_CNT_MASK)
+			<< A3700_SPI_INSTR_CNT_BIT);
+		val |= ((addr_cnt & A3700_SPI_ADDR_CNT_MASK)
+			<< A3700_SPI_ADDR_CNT_BIT);
+		val |= ((dummy_cnt & A3700_SPI_DUMMY_CNT_MASK)
+			<< A3700_SPI_DUMMY_CNT_BIT);
+	}
+	spireg_write(a3700_spi, A3700_SPI_IF_HDR_CNT_REG, val);
+
+	/* Update the buffer length to be transferred */
+	a3700_spi->buf_len -= (instr_cnt + addr_cnt + dummy_cnt);
+
+	/* Set Instruction */
+	val = 0;
+	while (instr_cnt--) {
+		val = (val << 8) | a3700_spi->tx_buf[0];
+		a3700_spi->tx_buf++;
+	}
+	spireg_write(a3700_spi, A3700_SPI_IF_INST_REG, val);
+
+	/* Set Address */
+	val = 0;
+	while (addr_cnt--) {
+		val = (val << 8) | a3700_spi->tx_buf[0];
+		a3700_spi->tx_buf++;
+	}
+	spireg_write(a3700_spi, A3700_SPI_IF_ADDR_REG, val);
+}
+
+static int a3700_is_wfifo_full(struct a3700_spi *a3700_spi)
+{
+	u32 val;
+
+	val = spireg_read(a3700_spi, A3700_SPI_IF_CTRL_REG);
+	return (val & A3700_SPI_WFIFO_FULL);
+}
+
+static int a3700_spi_fifo_write(struct a3700_spi *a3700_spi)
+{
+	u32 val;
+	int i = 0;
+
+	while (!a3700_is_wfifo_full(a3700_spi) && a3700_spi->buf_len) {
+		val = 0;
+		if (a3700_spi->buf_len >= 4) {
+			val = cpu_to_le32(*(u32 *)a3700_spi->tx_buf);
+			spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, val);
+
+			a3700_spi->buf_len -= 4;
+			a3700_spi->tx_buf += 4;
+		} else {
+			/*
+			 * If the remained buffer length is less than 4-bytes,
+			 * we should pad the write buffer with all ones. So that
+			 * it avoids overwrite the unexpected bytes following
+			 * the last one.
+			 */
+			val = GENMASK(31, 0);
+			while (a3700_spi->buf_len) {
+				val &= ~(0xff << (8 * i));
+				v