Merge branch 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - New drivers: UniPhier (with and without FIFO)

 - some drivers got some bigger rework: ismt, designware, img-scb (rcar
   had to be reverted because issues were showing up just lately)

 - ACPI: reworked the device scanning and added support for muxes

... and quite a lot of driver bugfixes and cleanups this time.  All
files touched outside of the i2c realm have proper acks.

* 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits)
  i2c: rcar: Revert the latest refactoring series
  i2c: pnx: remove superfluous assignment
  MAINTAINERS: i2c: drop i2c-pnx maintainer
  MAINTAINERS: i2c: mark also subdirectories as maintained
  i2c: cadence: enable driver for ARM64
  i2c: i801: Document Intel DNV and Broxton
  i2c: at91: manage unexpected RXRDY flag when starting a transfer
  i2c: pnx: Use setup_timer instead of open coding it
  i2c: add ACPI support for I2C mux ports
  acpi: add acpi_preset_companion() stub
  i2c: pxa: Add support for pxa910/988 & new configuration features
  i2c: au1550: Convert to devm_kzalloc and devm_ioremap_resource
  i2c-dev: Fix I2C_SLAVE ioctl comment
  i2c-dev: Fix typo in ioctl name reference
  i2c: sirf: tune the divider to make i2c bus freq more accurate
  i2c: imx: Use -ENXIO as error in the NACK case
  i2c: i801: Add support for Intel Broxton
  i2c: i801: Add support for Intel DNV
  i2c: mediatek: add i2c resume support
  i2c: imx: implement bus recovery
  ...

44 files changed, 1683 insertions, 379 deletions

diff --git a/Documentation/acpi/i2c-muxes.txt b/Documentation/acpi/i2c-muxes.txt
new file mode 100644
index 000000000000..9fcc4f0b885e
--- /dev/null
+++ b/Documentation/acpi/i2c-muxes.txt
@@ -0,0 +1,58 @@
+ACPI I2C Muxes
+--------------
+
+Describing an I2C device hierarchy that includes I2C muxes requires an ACPI
+Device () scope per mux channel.
+
+Consider this topology:
+
++------+   +------+
+| SMB1 |-->| MUX0 |--CH00--> i2c client A (0x50)
+|      |   | 0x70 |--CH01--> i2c client B (0x50)
++------+   +------+
+
+which corresponds to the following ASL:
+
+Device (SMB1)
+{
+    Name (_HID, ...)
+    Device (MUX0)
+    {
+        Name (_HID, ...)
+        Name (_CRS, ResourceTemplate () {
+            I2cSerialBus (0x70, ControllerInitiated, I2C_SPEED,
+                          AddressingMode7Bit, "^SMB1", 0x00,
+                          ResourceConsumer,,)
+        }
+
+        Device (CH00)
+        {
+            Name (_ADR, 0)
+
+            Device (CLIA)
+            {
+                Name (_HID, ...)
+                Name (_CRS, ResourceTemplate () {
+                    I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED,
+                                  AddressingMode7Bit, "^CH00", 0x00,
+                                  ResourceConsumer,,)
+                }
+            }
+        }
+
+        Device (CH01)
+        {
+            Name (_ADR, 1)
+
+            Device (CLIB)
+            {
+                Name (_HID, ...)
+                Name (_CRS, ResourceTemplate () {
+                    I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED,
+                                  AddressingMode7Bit, "^CH01", 0x00,
+                                  ResourceConsumer,,)
+                }
+            }
+        }
+    }
+}
diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
index a4e1cbc810c1..5b123e0e4cc2 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
@@ -1,10 +1,10 @@
-* Texas Instruments Davinci I2C
+* Texas Instruments Davinci/Keystone I2C
 
 This file provides information, what the device node for the
-davinci i2c interface contain.
+davinci/keystone i2c interface contains.
 
 Required properties:
-- compatible: "ti,davinci-i2c";
+- compatible: "ti,davinci-i2c" or "ti,keystone-i2c";
 - reg : Offset and length of the register set for the device
 
 Recommended properties :
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
index ce4311d726ae..eab5836ba7f9 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
@@ -14,6 +14,10 @@ Optional properties:
   The absence of the propoerty indicates the default frequency 100 kHz.
 - dmas: A list of two dma specifiers, one for each entry in dma-names.
 - dma-names: should contain "tx" and "rx".
+- scl-gpios: specify the gpio related to SCL pin
+- sda-gpios: specify the gpio related to SDA pin
+- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
+  bus recovery, call it "gpio" state
 
 Examples:
 
@@ -37,4 +41,9 @@ i2c0: i2c@40066000 { /* i2c0 on vf610 */
 	dmas = <&edma0 0 50>,
 		<&edma0 0 51>;
 	dma-names = "rx","tx";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
 };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
index 16b3e07aa98f..ea406eb20fa5 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
@@ -10,6 +10,7 @@ Required properties:
 	"renesas,i2c-r8a7792"
 	"renesas,i2c-r8a7793"
 	"renesas,i2c-r8a7794"
+	"renesas,i2c-r8a7795"
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: interrupt specifier.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
index 2bfc6e7ed094..214f94c25d37 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
@@ -10,6 +10,7 @@ Required properties:
 			- "renesas,iic-r8a7792" (R-Car V2H)
 			- "renesas,iic-r8a7793" (R-Car M2-N)
 			- "renesas,iic-r8a7794" (R-Car E2)
+			- "renesas,iic-r8a7795" (R-Car H3)
 			- "renesas,iic-sh73a0" (SH-Mobile AG5)
 - reg             : address start and address range size of device
 - interrupts      : interrupt of device
diff --git a/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt b/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt
new file mode 100644
index 000000000000..27fc6f8c798b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt
@@ -0,0 +1,25 @@
+UniPhier I2C controller (FIFO-builtin)
+
+Required properties:
+- compatible: should be "socionext,uniphier-fi2c".
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- reg: offset and length of the register set for the device.
+- interrupts: a single interrupt specifier.
+- clocks: phandle to the input clock.
+
+Optional properties:
+- clock-frequency: desired I2C bus frequency in Hz.  The maximum supported
+  value is 400000.  Defaults to 100000 if not specified.
+
+Examples:
+
+	i2c0: i2c@58780000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58780000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 41 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt b/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt
new file mode 100644
index 000000000000..26f9d95b3436
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt
@@ -0,0 +1,25 @@
+UniPhier I2C controller (FIFO-less)
+
+Required properties:
+- compatible: should be "socionext,uniphier-i2c".
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- reg: offset and length of the register set for the device.
+- interrupts: a single interrupt specifier.
+- clocks: phandle to the input clock.
+
+Optional properties:
+- clock-frequency: desired I2C bus frequency in Hz.  The maximum supported
+  value is 400000.  Defaults to 100000 if not specified.
+
+Examples:
+
+	i2c0: i2c@58400000 {
+		compatible = "socionext,uniphier-i2c";
+		reg = <0x58400000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 41 1>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 82f48f774afb..6a4b1af724f8 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -30,6 +30,8 @@ Supported adapters:
   * Intel BayTrail (SOC)
   * Intel Sunrise Point-H (PCH)
   * Intel Sunrise Point-LP (PCH)
+  * Intel DNV (SOC)
+  * Intel Broxton (SOC)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/MAINTAINERS b/MAINTAINERS
index 1a73c20bc400..8f10834124a9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1626,6 +1626,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/boot/dts/uniphier*
 F:	arch/arm/mach-uniphier/
+F:	drivers/i2c/busses/i2c-uniphier*
 F:	drivers/pinctrl/uniphier/
 F:	drivers/tty/serial/8250/8250_uniphier.c
 N:	uniphier
@@ -5163,6 +5164,7 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/i2c/
 F:	Documentation/i2c/
 F:	drivers/i2c/
+F:	drivers/i2c/*/
 F:	include/linux/i2c.h
 F:	include/linux/i2c-*.h
 F:	include/uapi/linux/i2c.h
@@ -8418,12 +8420,6 @@ M:	"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
 S:	Maintained
 F:	drivers/pnp/
 
-PNXxxxx I2C DRIVER
-M:	Vitaly Wool <vitalywool@gmail.com>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	drivers/i2c/busses/i2c-pnx.c
-
 PPP PROTOCOL DRIVERS AND COMPRESSORS
 M:	Paul Mackerras <paulus@samba.org>
 L:	linux-ppp@vger.kernel.org
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 08b86178e8fb..e24c2b680b47 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -124,6 +124,8 @@ config I2C_I801
 	    BayTrail (SOC)
 	    Sunrise Point-H (PCH)
 	    Sunrise Point-LP (PCH)
+	    DNV (SOC)
+	    Broxton (SOC)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
@@ -422,7 +424,7 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
 
 config I2C_CADENCE
 	tristate "Cadence I2C Controller"
-	depends on ARCH_ZYNQ
+	depends on ARCH_ZYNQ || ARM64
 	help
 	  Say yes here to select Cadence I2C Host Controller. This controller is
 	  e.g. used by Xilinx Zynq.
@@ -582,10 +584,10 @@ config I2C_IMG
 
 config I2C_IMX
 	tristate "IMX I2C interface"
-	depends on ARCH_MXC
+	depends on ARCH_MXC || ARCH_LAYERSCAPE
 	help
 	  Say Y here if you want to use the IIC bus controller on
-	  the Freescale i.MX/MXC processors.
+	  the Freescale i.MX/MXC or Layerscape processors.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-imx.
@@ -902,6 +904,22 @@ config I2C_TEGRA
 	  If you say yes to this option, support will be included for the
 	  I2C controller embedded in NVIDIA Tegra SOCs
 
+config I2C_UNIPHIER
+	tristate "UniPhier FIFO-less I2C controller"
+	depends on ARCH_UNIPHIER
+	help
+	  If you say yes to this option, support will be included for
+	  the UniPhier FIFO-less I2C interface embedded in PH1-LD4, PH1-sLD8,
+	  or older UniPhier SoCs.
+
+config I2C_UNIPHIER_F
+	tristate "UniPhier FIFO-builtin I2C controller"
+	depends on ARCH_UNIPHIER
+	help
+	  If you say yes to this option, support will be included for
+	  the UniPhier FIFO-builtin I2C interface embedded in PH1-Pro4,
+	  PH1-Pro5, or newer UniPhier SoCs.
+
 config I2C_VERSATILE
 	tristate "ARM Versatile/Realview I2C bus support"
 	depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 6df3b303bd09..37f2819b4560 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -87,6 +87,8 @@ obj-$(CONFIG_I2C_ST)		+= i2c-st.o
 obj-$(CONFIG_I2C_STU300)	+= i2c-stu300.o
 obj-$(CONFIG_I2C_SUN6I_P2WI)	+= i2c-sun6i-p2wi.o
 obj-$(CONFIG_I2C_TEGRA)		+= i2c-tegra.o
+obj-$(CONFIG_I2C_UNIPHIER)	+= i2c-uniphier.o
+obj-$(CONFIG_I2C_UNIPHIER_F)	+= i2c-uniphier-f.o
 obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
 obj-$(CONFIG_I2C_WMT)		+= i2c-wmt.o
 obj-$(CONFIG_I2C_OCTEON)	+= i2c-octeon.o
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 1c758cd1e1ba..10835d1f559b 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -347,8 +347,14 @@ error:
 
 static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
 {
-	if (!dev->buf_len)
+	/*
+	 * If we are in this case, it means there is garbage data in RHR, so
+	 * delete them.
+	 */
+	if (!dev->buf_len) {
+		at91_twi_read(dev, AT91_TWI_RHR);
 		return;
+	}
 
 	/* 8bit read works with and without FIFO */
 	*dev->buf = readb_relaxed(dev->base + AT91_TWI_RHR);
@@ -465,19 +471,73 @@ static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id)
 
 	if (!irqstatus)
 		return IRQ_NONE;
-	else if (irqstatus & AT91_TWI_RXRDY)
+	/*
+	 * In reception, the behavior of the twi device (before sama5d2) is
+	 * weird. There is some magic about RXRDY flag! When a data has been
+	 * almost received, the reception of a new one is anticipated if there
+	 * is no stop command to send. That is the reason why ask for sending
+	 * the stop command not on the last data but on the second last one.
+	 *
+	 * Unfortunately, we could still have the RXRDY flag set even if the
+	 * transfer is done and we have read the last data. It might happen
+	 * when the i2c slave device sends too quickly data after receiving the
+	 * ack from the master. The data has been almost received before having
+	 * the order to send stop. In this case, sending the stop command could
+	 * cause a RXRDY interrupt with a TXCOMP one. It is better to manage
+	 * the RXRDY interrupt first in order to not keep garbage data in the
+	 * Receive Holding Register for the next transfer.
+	 */
+	if (irqstatus & AT91_TWI_RXRDY)
 		at91_twi_read_next_byte(dev);
-	else if (irqstatus & AT91_TWI_TXRDY)
-		at91_twi_write_next_byte(dev);
-
-	/* catch error flags */
-	dev->transfer_status |= status;
 
+	/*
+	 * When a NACK condition is detected, the I2C controller sets the NACK,
+	 * TXCOMP and TXRDY bits all together in the Status Register (SR).
+	 *
+	 * 1 - Handling NACK errors with CPU write transfer.
+	 *
+	 * In such case, we should not write the next byte into the Transmit
+	 * Holding Register (THR) otherwise the I2C controller would start a new
+	 * transfer and the I2C slave is likely to reply by another NACK.
+	 *
+	 * 2 - Handling NACK errors with DMA write transfer.
+	 *
+	 * By setting the TXRDY bit in the SR, the I2C controller also triggers
+	 * the DMA controller to write the next data into the THR. Then the
+	 * result depends on the hardware version of the I2C controller.
+	 *
+	 * 2a - Without support of the Alternative Command mode.
+	 *
+	 * This is the worst case: the DMA controller is triggered to write the
+	 * next data into the THR, hence starting a new transfer: the I2C slave
+	 * is likely to reply by another NACK.
+	 * Concurrently, this interrupt handler is likely to be called to manage
+	 * the first NACK before the I2C controller detects the second NACK and
+	 * sets once again the NACK bit into the SR.
+	 * When handling the first NACK, this interrupt handler disables the I2C
+	 * controller interruptions, especially the NACK interrupt.
+	 * Hence, the NACK bit is pending into the SR. This is why we should
+	 * read the SR to clear all pending interrupts at the beginning of
+	 * at91_do_twi_transfer() before actually starting a new transfer.
+	 *
+	 * 2b - With support of the Alternative Command mode.
+	 *
+	 * When a NACK condition is detected, the I2C controller also locks the
+	 * THR (and sets the LOCK bit in the SR): even though the DMA controller
+	 * is triggered by the TXRDY bit to write the next data into the THR,
+	 * this data actually won't go on the I2C bus hence a second NACK is not
+	 * generated.
+	 */
 	if (irqstatus & (AT91_TWI_TXCOMP | AT91_TWI_NACK)) {
 		at91_disable_twi_interrupts(dev);
 		complete(&dev->cmd_complete);
+	} else if (irqstatus & AT91_TWI_TXRDY) {
+		at91_twi_write_next_byte(dev);
 	}
 
+	/* catch error flags */
+	dev->transfer_status |= status;
+
 	return IRQ_HANDLED;
 }
 
@@ -537,6 +597,9 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 	reinit_completion(&dev->cmd_complete);
 	dev->transfer_status = 0;
 
+	/* Clear pending interrupts, such as NACK. */
+	at91_twi_read(dev, AT91_TWI_SR);
+
 	if (dev->fifo_size) {
 		unsigned fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
 
@@ -558,11 +621,6 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 	} else if (dev->msg->flags & I2C_M_RD) {
 		unsigned start_flags = AT91_TWI_START;
 
-		if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) {
-			dev_err(dev->dev, "RXRDY still set!");
-			at91_twi_read(dev, AT91_TWI_RHR);
-		}
-
 		/* if only one byte is to be read, immediately stop transfer */
 		if (!has_alt_cmd && dev->buf_len <= 1 &&
 		    !(dev->msg->flags & I2C_M_RECV_LEN))
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index a6aae84e5706..5bcb1f0bb334 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -48,7 +48,6 @@ struct i2c_au1550_data {
 	void __iomem *psc_base;
 	int	xfer_timeout;
 	struct i2c_adapter adap;
-	struct resource *ioarea;
 };
 
 static inline void WR(struct i2c_au1550_data *a, int r, unsigned long v)
@@ -284,10 +283,10 @@ static void i2c_au1550_setup(struct i2c_au1550_data *priv)
 	/* Set the protocol timer values.  See Table 71 in the
 	 * Au1550 Data Book for standard timing values.
 	 */
-	WR(priv, PSC_SMBTMR, PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
-		PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \
-		PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \
-		PSC_SMBTMR_SET_CH(15));
+	WR(priv, PSC_SMBTMR, PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(20) | \
+		PSC_SMBTMR_SET_PU(20) | PSC_SMBTMR_SET_SH(20) | \
+		PSC_SMBTMR_SET_SU(20) | PSC_SMBTMR_SET_CL(20) | \
+		PSC_SMBTMR_SET_CH(20));
 
 	cfg |= PSC_SMBCFG_DE_ENABLE;
 	WR(priv, PSC_SMBCFG, cfg);
@@ -315,30 +314,16 @@ i2c_au1550_probe(struct platform_device *pdev)
 	struct resource *r;
 	int ret;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r) {
-		ret = -ENODEV;
-		goto out;
-	}
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct i2c_au1550_data),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
 
-	priv = kzalloc(sizeof(struct i2c_au1550_data), GFP_KERNEL);
-	if (!priv) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	priv->ioarea = request_mem_region(r->start, resource_size(r),
-					  pdev->name);
-	if (!priv->ioarea) {
-		ret = -EBUSY;
-		goto out_mem;
-	}
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->psc_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(priv->psc_base))
+		return PTR_ERR(priv->psc_base);
 
-	priv->psc_base = ioremap(r->start, resource_size(r));
-	if (!priv->psc_base) {
-		ret = -EIO;
-		goto out_map;
-	}
 	priv->xfer_timeout = 200;
 
 	priv->adap.nr = pdev->id;
@@ -351,20 +336,13 @@ i2c_au1550_probe(struct platform_device *pdev)
 	i2c_au1550_setup(priv);
 
 	ret = i2c_add_numbered_adapter(&priv->adap);
-	if (ret == 0) {
-		platform_set_drvdata(pdev, priv);
-		return 0;
+	if (ret) {
+		i2c_au1550_disable(priv);
+		return ret;
 	}
 
-	i2c_au1550_disable(priv);
-	iounmap(priv->psc_base);
-out_map:
-	release_resource(priv->ioarea);
-	kfree(priv->ioarea);
-out_mem:
-	kfree(priv);
-out:
-	return ret;
+	platform_set_drvdata(pdev, priv);
+	return 0;
 }
 
 static int i2c_au1550_remove(struct platform_device *pdev)
@@ -373,10 +351,6 @@ static int i2c_au1550_remove(struct platform_device *pdev)
 
 	i2c_del_adapter(&priv->adap);
 	i2c_au1550_disable(priv);
-	iounmap(priv->psc_base);
-	release_resource(priv->ioarea);
-	kfree(priv->ioarea);
-	kfree(priv);
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 3fbb9a035532..c5628a42170a 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -181,6 +181,7 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
 	u32 clkh;
 	u32 clkl;
 	u32 input_clock = clk_get_rate(dev->clk);
+	struct device_node *of_node = dev->dev->of_node;
 
 	/* NOTE: I2C Clock divider programming info
 	 * As per I2C specs the following formulas provide prescaler
@@ -196,6 +197,9 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
 	 * where if PSC == 0, d = 7,
 	 *       if PSC == 1, d = 6
 	 *       if PSC > 1 , d = 5
+	 *
+	 * Note:
+	 * d is always 6 on Keystone I2C controller
 	 */
 
 	/* get minimum of 7 MHz clock, but max of 12 MHz */
@@ -204,6 +208,9 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
 		psc++;	/* better to run under spec than over */
 	d = (psc >= 2) ? 5 : 7 - psc;
 
+	if (of_node && of_device_is_compatible(of_node, "ti,keystone-i2c"))
+		d = 6;
+
 	clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000));
 	/* Avoid driving the bus too fast because of rounding errors above */
 	if (input_clock / (psc + 1) / clk > pdata->bus_freq * 1000)
@@ -726,6 +733,7 @@ static struct i2c_algorithm i2c_davinci_algo = {
 
 static const struct of_device_id davinci_i2c_of_match[] = {
 	{.compatible = "ti,davinci-i2c", },
+	{.compatible = "ti,keystone-i2c", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, davinci_i2c_of_match);
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 7441cdc1b34a..8c48b27ba059 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -165,7 +165,7 @@ static char *abort_sources[] = {
 		"lost arbitration",
 };
 
-u32 dw_readl(struct dw_i2c_dev *dev, int offset)
+static u32 dw_readl(struct dw_i2c_dev *dev, int offset)
 {
 	u32 value;
 
@@ -181,7 +181,7 @@ u32 dw_readl(struct dw_i2c_dev *dev, int offset)
 		return value;
 }
 
-void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
+static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
 {
 	if (dev->accessor_flags & ACCESS_SWAP)
 		b = swab32(b);
@@ -438,7 +438,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 	__i2c_dw_enable(dev, true);
 
 	/* Clear and enable interrupts */
-	i2c_dw_clear_int(dev);
+	dw_readl(dev, DW_IC_CLR_INTR);
 	dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK);
 }
 
@@ -618,7 +618,7 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
 /*
  * Prepare controller for a transaction and call i2c_dw_xfer_msg
  */
-int
+static int
 i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 {
 	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
@@ -702,14 +702,17 @@ done_nolock:
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(i2c_dw_xfer);
 
-u32 i2c_dw_func(struct i2c_adapter *adap)
+static u32 i2c_dw_func(struct i2c_adapter *adap)
 {
 	struct dw_i2c_dev *dev =