Merge tag 'xtensa-20161005' of git://github.com/jcmvbkbc/linux-xtensa

Pull Xtensa updates from Max Filippov:
 "Updates for the xtensa architecture.  It is a combined set of patches
  for 4.8 that never got to the mainline and new patches for 4.9.

   - add new kernel memory layouts for MMUv3 cores: with 256MB and 512MB
     KSEG size, starting at physical address other than 0

   - make kernel load address configurable

   - clean up kernel memory layout macros

   - drop sysmem early allocator and switch to memblock

   - enable kmemleak and memory reservation from the device tree

   - wire up new syscalls: userfaultfd, membarrier, mlock2,
     copy_file_range, preadv2 and pwritev2

   - add new platform: Cadence Configurable System Platform (CSP) and
     new core variant for it: xt_lnx

   - rearrange CCOUNT calibration code, make most of it generic

   - improve machine reset code (XTFPGA now reboots reliably with MMUv3
     cores)

   - provide default memmap command line option for configurations
     without device tree support

   - ISS fixes: simdisk is now capable of using highmem pages, panic
     correctly terminates simulator"

* tag 'xtensa-20161005' of git://github.com/jcmvbkbc/linux-xtensa: (24 commits)
  xtensa: disable MMU initialization option on MMUv2 cores
  xtensa: add default memmap and mmio32native options to defconfigs
  xtensa: add default memmap option to common_defconfig
  xtensa: add default memmap option to iss_defconfig
  xtensa: ISS: allow simdisk to use high memory buffers
  xtensa: ISS: define simc_exit and use it instead of inline asm
  xtensa: xtfpga: group platform_* functions together
  xtensa: rearrange CCOUNT calibration
  xtensa: xtfpga: use clock provider, don't update DT
  xtensa: Tweak xuartps UART driver Rx watermark for Cadence CSP config.
  xtensa: initialize MMU before jumping to reset vector
  xtensa: fix icountlevel setting in cpu_reset
  xtensa: extract common CPU reset code into separate function
  xtensa: Added Cadence CSP kernel configuration for Xtensa
  xtensa: fix default kernel load address
  xtensa: wire up new syscalls
  xtensa: support reserved-memory DT node
  xtensa: drop sysmem and switch to memblock
  xtensa: minimize use of PLATFORM_DEFAULT_MEM_{ADDR,SIZE}
  xtensa: cleanup MMU setup and kernel layout macros
  ...

42 files changed, 1805 insertions, 1926 deletions

diff --git a/Documentation/xtensa/mmu.txt b/Documentation/xtensa/mmu.txt
index 0312fe66475c..222a2c6748e6 100644
--- a/Documentation/xtensa/mmu.txt
+++ b/Documentation/xtensa/mmu.txt
@@ -3,15 +3,8 @@ MMUv3 initialization sequence.
 The code in the initialize_mmu macro sets up MMUv3 memory mapping
 identically to MMUv2 fixed memory mapping. Depending on
 CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX symbol this code is
-located in one of the following address ranges:
-
-    0xF0000000..0xFFFFFFFF (will keep same address in MMU v2 layout;
-    			 typically ROM)
-    0x00000000..0x07FFFFFF (system RAM; this code is actually linked
-    			 at 0xD0000000..0xD7FFFFFF [cached]
-    			 or 0xD8000000..0xDFFFFFFF [uncached];
-    			 in any case, initially runs elsewhere
-    			 than linked, so have to be careful)
+located in addresses it was linked for (symbol undefined), or not
+(symbol defined), so it needs to be position-independent.
 
 The code has the following assumptions:
   This code fragment is run only on an MMU v3.
@@ -28,24 +21,26 @@ TLB setup proceeds along the following steps.
     PA = physical address (two upper nibbles of it);
     pc = physical range that contains this code;
 
-After step 2, we jump to virtual address in 0x40000000..0x5fffffff
-that corresponds to next instruction to execute in this code.
-After step 4, we jump to intended (linked) address of this code.
-
-    Step 0     Step1     Step 2     Step3     Step 4     Step5
- ============  =====  ============  =====  ============  =====
-   VA      PA     PA    VA      PA     PA    VA      PA     PA
- ------    --     --  ------    --     --  ------    --     --
- E0..FF -> E0  -> E0  E0..FF -> E0         F0..FF -> F0  -> F0
- C0..DF -> C0  -> C0  C0..DF -> C0         E0..EF -> F0  -> F0
- A0..BF -> A0  -> A0  A0..BF -> A0         D8..DF -> 00  -> 00
- 80..9F -> 80  -> 80  80..9F -> 80         D0..D7 -> 00  -> 00
- 60..7F -> 60  -> 60  60..7F -> 60
- 40..5F -> 40         40..5F -> pc  -> pc  40..5F -> pc
- 20..3F -> 20  -> 20  20..3F -> 20
- 00..1F -> 00  -> 00  00..1F -> 00
-
-The default location of IO peripherals is above 0xf0000000. This may change
+After step 2, we jump to virtual address in the range 0x40000000..0x5fffffff
+or 0x00000000..0x1fffffff, depending on whether the kernel was loaded below
+0x40000000 or above. That address corresponds to next instruction to execute
+in this code. After step 4, we jump to intended (linked) address of this code.
+The scheme below assumes that the kernel is loaded below 0x40000000.
+
+        Step0  Step1  Step2  Step3          Step4  Step5
+        =====  =====  =====  =====          =====  =====
+   VA      PA     PA     PA     PA     VA      PA     PA
+ ------    --     --     --     --   ------    --     --
+ E0..FF -> E0  -> E0  -> E0          F0..FF -> F0  -> F0
+ C0..DF -> C0  -> C0  -> C0          E0..EF -> F0  -> F0
+ A0..BF -> A0  -> A0  -> A0          D8..DF -> 00  -> 00
+ 80..9F -> 80  -> 80  -> 80          D0..D7 -> 00  -> 00
+ 60..7F -> 60  -> 60  -> 60
+ 40..5F -> 40         -> pc  -> pc   40..5F -> pc
+ 20..3F -> 20  -> 20  -> 20
+ 00..1F -> 00  -> 00  -> 00
+
+The default location of IO peripherals is above 0xf0000000. This may be changed
 using a "ranges" property in a device tree simple-bus node. See ePAPR 1.1, §6.5
 for details on the syntax and semantic of simple-bus nodes. The following
 limitations apply:
@@ -62,3 +57,127 @@ limitations apply:
 
 6. The IO area covers the entire 256MB segment of parent-bus-address; the
    "ranges" triplet length field is ignored
+
+
+MMUv3 address space layouts.
+============================
+
+Default MMUv2-compatible layout.
+
+                      Symbol                   VADDR       Size
++------------------+
+| Userspace        |                           0x00000000  TASK_SIZE
++------------------+                           0x40000000
++------------------+
+| Page table       |                           0x80000000
++------------------+                           0x80400000
++------------------+
+| KMAP area        |  PKMAP_BASE                           PTRS_PER_PTE *
+|                  |                                       DCACHE_N_COLORS *
+|                  |                                       PAGE_SIZE
+|                  |                                       (4MB * DCACHE_N_COLORS)
++------------------+
+| Atomic KMAP area |  FIXADDR_START                        KM_TYPE_NR *
+|                  |                                       NR_CPUS *
+|                  |                                       DCACHE_N_COLORS *
+|                  |                                       PAGE_SIZE
++------------------+  FIXADDR_TOP              0xbffff000
++------------------+
+| VMALLOC area     |  VMALLOC_START            0xc0000000  128MB - 64KB
++------------------+  VMALLOC_END
+| Cache aliasing   |  TLBTEMP_BASE_1           0xc7ff0000  DCACHE_WAY_SIZE
+| remap area 1     |
++------------------+
+| Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
+| remap area 2     |
++------------------+
++------------------+
+| Cached KSEG      |  XCHAL_KSEG_CACHED_VADDR  0xd0000000  128MB
++------------------+
+| Uncached KSEG    |  XCHAL_KSEG_BYPASS_VADDR  0xd8000000  128MB
++------------------+
+| Cached KIO       |  XCHAL_KIO_CACHED_VADDR   0xe0000000  256MB
++------------------+
+| Uncached KIO     |  XCHAL_KIO_BYPASS_VADDR   0xf0000000  256MB
++------------------+
+
+
+256MB cached + 256MB uncached layout.
+
+                      Symbol                   VADDR       Size
++------------------+
+| Userspace        |                           0x00000000  TASK_SIZE
++------------------+                           0x40000000
++------------------+
+| Page table       |                           0x80000000
++------------------+                           0x80400000
++------------------+
+| KMAP area        |  PKMAP_BASE                           PTRS_PER_PTE *
+|                  |                                       DCACHE_N_COLORS *
+|                  |                                       PAGE_SIZE
+|                  |                                       (4MB * DCACHE_N_COLORS)
++------------------+
+| Atomic KMAP area |  FIXADDR_START                        KM_TYPE_NR *
+|                  |                                       NR_CPUS *
+|                  |                                       DCACHE_N_COLORS *
+|                  |                                       PAGE_SIZE
++------------------+  FIXADDR_TOP              0x9ffff000
++------------------+
+| VMALLOC area     |  VMALLOC_START            0xa0000000  128MB - 64KB
++------------------+  VMALLOC_END
+| Cache aliasing   |  TLBTEMP_BASE_1           0xa7ff0000  DCACHE_WAY_SIZE
+| remap area 1     |
++------------------+
+| Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
+| remap area 2     |
++------------------+
++------------------+
+| Cached KSEG      |  XCHAL_KSEG_CACHED_VADDR  0xb0000000  256MB
++------------------+
+| Uncached KSEG    |  XCHAL_KSEG_BYPASS_VADDR  0xc0000000  256MB
++------------------+
++------------------+
+| Cached KIO       |  XCHAL_KIO_CACHED_VADDR   0xe0000000  256MB
++------------------+
+| Uncached KIO     |  XCHAL_KIO_BYPASS_VADDR   0xf0000000  256MB
++------------------+
+
+
+512MB cached + 512MB uncached layout.
+
+                      Symbol                   VADDR       Size
++------------------+
+| Userspace        |                           0x00000000  TASK_SIZE
++------------------+                           0x40000000
++------------------+
+| Page table       |                           0x80000000
++------------------+                           0x80400000
++------------------+
+| KMAP area        |  PKMAP_BASE                           PTRS_PER_PTE *
+|                  |                                       DCACHE_N_COLORS *
+|                  |                                       PAGE_SIZE
+|                  |                                       (4MB * DCACHE_N_COLORS)
++------------------+
+| Atomic KMAP area |  FIXADDR_START                        KM_TYPE_NR *
+|                  |                                       NR_CPUS *
+|                  |                                       DCACHE_N_COLORS *
+|                  |                                       PAGE_SIZE
++------------------+  FIXADDR_TOP              0x8ffff000
++------------------+
+| VMALLOC area     |  VMALLOC_START            0x90000000  128MB - 64KB
++------------------+  VMALLOC_END
+| Cache aliasing   |  TLBTEMP_BASE_1           0x97ff0000  DCACHE_WAY_SIZE
+| remap area 1     |
++------------------+
+| Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
+| remap area 2     |
++------------------+
++------------------+
+| Cached KSEG      |  XCHAL_KSEG_CACHED_VADDR  0xa0000000  512MB
++------------------+
+| Uncached KSEG    |  XCHAL_KSEG_BYPASS_VADDR  0xc0000000  512MB
++------------------+
+| Cached KIO       |  XCHAL_KIO_CACHED_VADDR   0xe0000000  256MB
++------------------+
+| Uncached KIO     |  XCHAL_KIO_BYPASS_VADDR   0xf0000000  256MB
++------------------+
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 64336f666fb6..f61058617ada 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -13,16 +13,19 @@ config XTENSA
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
+	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_API_DEBUG
 	select HAVE_EXIT_THREAD
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUTEX_CMPXCHG if !MMU
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS
 	select HAVE_IRQ_TIME_ACCOUNTING
+	select HAVE_MEMBLOCK
 	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
 	select IRQ_DOMAIN
 	select MODULES_USE_ELF_RELA
+	select NO_BOOTMEM
 	select PERF_USE_VMALLOC
 	select VIRT_TO_BUS
 	help
@@ -209,7 +212,8 @@ config HOTPLUG_CPU
 
 config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
 	bool "Initialize Xtensa MMU inside the Linux kernel code"
-	default y
+	depends on !XTENSA_VARIANT_FSF && !XTENSA_VARIANT_DC232B
+	default y if XTENSA_VARIANT_DC233C || XTENSA_VARIANT_CUSTOM
 	help
 	  Earlier version initialized the MMU in the exception vector
 	  before jumping to _startup in head.S and had an advantage that
@@ -236,6 +240,71 @@ config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
 
 	  If in doubt, say Y.
 
+config KSEG_PADDR
+	hex "Physical address of the KSEG mapping"
+	depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX && MMU
+	default 0x00000000
+	help
+	  This is the physical address where KSEG is mapped. Please refer to
+	  the chosen KSEG layout help for the required address alignment.
+	  Unpacked kernel image (including vectors) must be located completely
+	  within KSEG.
+	  Physical memory below this address is not available to linux.
+
+	  If unsure, leave the default value here.
+
+config KERNEL_LOAD_ADDRESS
+	hex "Kernel load address"
+	default 0x60003000 if !MMU
+	default 0x00003000 if MMU && INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	default 0xd0003000 if MMU && !INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	help
+	  This is the address where the kernel is loaded.
+	  It is virtual address for MMUv2 configurations and physical address
+	  for all other configurations.
+
+	  If unsure, leave the default value here.
+
+config VECTORS_OFFSET
+	hex "Kernel vectors offset"
+	default 0x00003000
+	help
+	  This is the offset of the kernel image from the relocatable vectors
+	  base.
+
+	  If unsure, leave the default value here.
+
+choice
+	prompt "KSEG layout"
+	depends on MMU
+	default XTENSA_KSEG_MMU_V2
+
+config XTENSA_KSEG_MMU_V2
+	bool "MMUv2: 128MB cached + 128MB uncached"
+	help
+	  MMUv2 compatible kernel memory map: TLB way 5 maps 128MB starting
+	  at KSEG_PADDR to 0xd0000000 with cache and to 0xd8000000
+	  without cache.
+	  KSEG_PADDR must be aligned to 128MB.
+
+config XTENSA_KSEG_256M
+	bool "256MB cached + 256MB uncached"
+	depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	help
+	  TLB way 6 maps 256MB starting at KSEG_PADDR to 0xb0000000
+	  with cache and to 0xc0000000 without cache.
+	  KSEG_PADDR must be aligned to 256MB.
+
+config XTENSA_KSEG_512M
+	bool "512MB cached + 512MB uncached"
+	depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	help
+	  TLB way 6 maps 512MB starting at KSEG_PADDR to 0xa0000000
+	  with cache and to 0xc0000000 without cache.
+	  KSEG_PADDR must be aligned to 256MB.
+
+endchoice
+
 config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
@@ -331,7 +400,7 @@ config XTENSA_PLATFORM_XT2000
 config XTENSA_PLATFORM_XTFPGA
 	bool "XTFPGA"
 	select ETHOC if ETHERNET
-	select PLATFORM_WANT_DEFAULT_MEM
+	select PLATFORM_WANT_DEFAULT_MEM if !MMU
 	select SERIAL_CONSOLE
 	select XTENSA_CALIBRATE_CCOUNT
 	help
@@ -369,6 +438,7 @@ config USE_OF
 	bool "Flattened Device Tree support"
 	select OF
 	select OF_EARLY_FLATTREE
+	select OF_RESERVED_MEM
 	help
 	  Include support for flattened device tree machine descriptions.
 
@@ -439,16 +509,9 @@ config DEFAULT_MEM_START
 	default 0x00000000 if MMU
 	default 0x60000000 if !MMU
 	help
-	  This is a fallback start address of the default memory area, it is
-	  used when no physical memory size is passed through DTB or through
-	  boot parameter from bootloader.
-
-	  In noMMU configuration the following parameters are derived from it:
-	  - kernel load address;
-	  - kernel entry point address;
-	  - relocatable vectors base address;
-	  - uBoot load address;
-	  - TASK_SIZE.
+	  This is the base address of the default memory area.
+	  Default memory area has platform-specific meaning, it may be used
+	  for e.g. early cache initialization.
 
 	  If unsure, leave the default value here.
 
@@ -457,11 +520,9 @@ config DEFAULT_MEM_SIZE
 	depends on PLATFORM_WANT_DEFAULT_MEM
 	default 0x04000000
 	help
-	  This is a fallback size of the default memory area, it is used when
-	  no physical memory size is passed through DTB or through boot
-	  parameter from bootloader.
-
-	  It's also used for TASK_SIZE calculation in noMMU configuration.
+	  This is the size of the default memory area.
+	  Default memory area has platform-specific meaning, it may be used
+	  for e.g. early cache initialization.
 
 	  If unsure, leave the default value here.
 
diff --git a/arch/xtensa/boot/boot-elf/boot.lds.S b/arch/xtensa/boot/boot-elf/boot.lds.S
index e54f2c9df63a..a30993054e9c 100644
--- a/arch/xtensa/boot/boot-elf/boot.lds.S
+++ b/arch/xtensa/boot/boot-elf/boot.lds.S
@@ -23,7 +23,7 @@ SECTIONS
 		*(.ResetVector.text)
 	}
 
-	.image KERNELOFFSET: AT (LOAD_MEMORY_ADDRESS)
+	.image KERNELOFFSET: AT (CONFIG_KERNEL_LOAD_ADDRESS)
 	{
 		_image_start = .;
 		*(image)
diff --git a/arch/xtensa/boot/boot-elf/bootstrap.S b/arch/xtensa/boot/boot-elf/bootstrap.S
index e6bf313613cf..b6aa85328ac0 100644
--- a/arch/xtensa/boot/boot-elf/bootstrap.S
+++ b/arch/xtensa/boot/boot-elf/bootstrap.S
@@ -35,7 +35,12 @@ _ResetVector:
 
 	.align 4
 RomInitAddr:
-	.word	LOAD_MEMORY_ADDRESS
+#if defined(CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) && \
+	XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
+	.word	CONFIG_KERNEL_LOAD_ADDRESS
+#else
+	.word	KERNELOFFSET
+#endif
 RomBootParam:
 	.word _bootparam
 _bootparam:
diff --git a/arch/xtensa/boot/boot-uboot/Makefile b/arch/xtensa/boot/boot-uboot/Makefile
index 403fcf23405c..0f4c417b4196 100644
--- a/arch/xtensa/boot/boot-uboot/Makefile
+++ b/arch/xtensa/boot/boot-uboot/Makefile
@@ -4,15 +4,7 @@
 # for more details.
 #
 
-ifdef CONFIG_MMU
-ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
-UIMAGE_LOADADDR = 0x00003000
-else
-UIMAGE_LOADADDR = 0xd0003000
-endif
-else
-UIMAGE_LOADADDR = $(shell printf "0x%x" $$(( ${CONFIG_DEFAULT_MEM_START} + 0x3000 )) )
-endif
+UIMAGE_LOADADDR = $(CONFIG_KERNEL_LOAD_ADDRESS)
 UIMAGE_COMPRESSION = gzip
 
 $(obj)/../uImage: vmlinux.bin.gz FORCE
diff --git a/arch/xtensa/boot/dts/csp.dts b/arch/xtensa/boot/dts/csp.dts
new file mode 100644
index 000000000000..4082f26716b9
--- /dev/null
+++ b/arch/xtensa/boot/dts/csp.dts
@@ -0,0 +1,54 @@
+/dts-v1/;
+
+/ {
+	compatible = "cdns,xtensa-xtfpga";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&pic>;
+
+	chosen {
+		bootargs = "earlycon=cdns,0xfd000000,115200 console=tty0 console=ttyPS0,115200 root=/dev/ram0 rw earlyprintk xilinx_uartps.rx_trigger_level=32 loglevel=8 nohz=off ignore_loglevel";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "cdns,xtensa-cpu";
+			reg = <0>;
+		};
+	};
+
+	pic: pic {
+		compatible = "cdns,xtensa-pic";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	clocks {
+		osc: main-oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x00000000 0xf0000000 0x10000000>;
+
+		uart0: serial@0d000000 {
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+			clocks = <&osc>, <&osc>;
+			clock-names = "uart_clk", "pclk";
+			reg = <0x0d000000 0x1000>;
+			interrupts = <0 1>;
+		};
+	};
+};
diff --git a/arch/xtensa/boot/dts/xtfpga.dtsi b/arch/xtensa/boot/dts/xtfpga.dtsi
index cd45f9c2c448..91616a9d79df 100644
--- a/arch/xtensa/boot/dts/xtfpga.dtsi
+++ b/arch/xtensa/boot/dts/xtfpga.dtsi
@@ -19,9 +19,7 @@
 		cpu@0 {
 			compatible = "cdns,xtensa-cpu";
 			reg = <0>;
-			/* Filled in by platform_setup from FPGA register
-			 * clock-frequency = <100000000>;
-			 */
+			clocks = <&osc>;
 		};
 	};
 
@@ -36,11 +34,6 @@
 	};
 
 	clocks {
-		osc: main-oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-		};
-
 		clk54: clk54 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
@@ -54,6 +47,12 @@
 		compatible = "simple-bus";
 		ranges = <0x00000000 0xf0000000 0x10000000>;
 
+		osc: main-oscillator {
+			#clock-cells = <0>;
+			compatible = "cdns,xtfpga-clock";
+			reg = <0x0d020004 0x4>;
+		};
+
 		serial0: serial@0d050020 {
 			device_type = "serial";
 			compatible = "ns16550a";
diff --git a/arch/xtensa/configs/audio_kc705_defconfig b/arch/xtensa/configs/audio_kc705_defconfig
index c4904db15582..8d16925765cb 100644
--- a/arch/xtensa/configs/audio_kc705_defconfig
+++ b/arch/xtensa/configs/audio_kc705_defconfig
@@ -33,7 +33,7 @@ CONFIG_HIGHMEM=y
 # CONFIG_PCI is not set
 CONFIG_XTENSA_PLATFORM_XTFPGA=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
+CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000@0"
 CONFIG_USE_OF=y
 CONFIG_BUILTIN_DTB="kc705"
 # CONFIG_COMPACTION is not set
diff --git a/arch/xtensa/configs/cadence_csp_defconfig b/arch/xtensa/configs/cadence_csp_defconfig
new file mode 100644
index 000000000000..f2d3094aa1d1
--- /dev/null
+++ b/arch/xtensa/configs/cadence_csp_defconfig
@@ -0,0 +1,122 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_USELIB=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="$$KERNEL_INITRAMFS_SOURCE"
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_XTENSA_VARIANT_CUSTOM=y
+CONFIG_XTENSA_VARIANT_CUSTOM_NAME="csp"
+CONFIG_XTENSA_UNALIGNED_USER=y
+CONFIG_PREEMPT=y
+CONFIG_HIGHMEM=y
+# CONFIG_PCI is not set
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_USE_OF=y
+CONFIG_BUILTIN_DTB="csp"
+# CONFIG_COMPACTION is not set
+CONFIG_XTFPGA_LCD=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_XILINX_PS_UART=y
+CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNRPC_DEBUG=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_RCU_TRACE=y
+CONFIG_FUNCTION_TRACER=y