Merge tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:

 - Support for the MIPSr6 MemoryMapID register & Global INValidate TLB
   (GINVT) instructions, allowing for more efficient TLB maintenance
   when running on a CPU such as the I6500 that supports these.

 - Enable huge page support for MIPS64r6.

 - Optimize post-DMA cache sync by removing that code entirely for
   kernel configurations in which we know it won't be needed.

 - The number of pages allocated for interrupt stacks is now calculated
   correctly, where before we would wastefully allocate too much memory
   in some configurations.

 - The ath79 platform migrates to devicetree.

 - The bcm47xx platform sees fixes for the Buffalo WHR-G54S board.

 - The ingenic/jz4740 platform gains support for appended devicetrees.

 - The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see
   cleanups as do various pieces of core architecture code.

* tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (66 commits)
  MIPS: lantiq: Remove separate GPHY Firmware loader
  MIPS: ingenic: Add support for appended devicetree
  MIPS: SGI-IP27: rework HUB interrupts
  MIPS: SGI-IP27: do boot CPU init later
  MIPS: SGI-IP27: do xtalk scanning later
  MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output
  MIPS: SGI-IP27: clean up bridge access and header files
  MIPS: SGI-IP27: get rid of volatile and hubreg_t
  MIPS: irq: Allocate accurate order pages for irq stack
  MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys()
  MIPS: eBPF: Remove REG_32BIT_ZERO_EX
  MIPS: eBPF: Always return sign extended 32b values
  MIPS: CM: Fix indentation
  MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support
  MIPS: OCTEON: program rx/tx-delay always from DT
  MIPS: OCTEON: delete board-specific link status
  MIPS: OCTEON: don't lie about interface type of CN3005 board
  MIPS: OCTEON: warn if deprecated link status is being used
  MIPS: OCTEON: add fixed-link nodes to in-kernel device tree
  MIPS: Delete unused flush_cache_sigtramp()
  ...

119 files changed, 1610 insertions, 4615 deletions

diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt
deleted file mode 100644
index a0c19bd1ce66..000000000000
--- a/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Lantiq XWAY SoC GPHY binding
-============================
-
-This binding describes a software-defined ethernet PHY, provided by the RCU
-module on newer Lantiq XWAY SoCs (xRX200 and newer).
-
--------------------------------------------------------------------------------
-Required properties:
-- compatible		: Should be one of
-				"lantiq,xrx200a1x-gphy"
-				"lantiq,xrx200a2x-gphy"
-				"lantiq,xrx300-gphy"
-				"lantiq,xrx330-gphy"
-- reg			: Addrress of the GPHY FW load address register
-- resets		: Must reference the RCU GPHY reset bit
-- reset-names		: One entry, value must be "gphy" or optional "gphy2"
-- clocks		: A reference to the (PMU) GPHY clock gate
-
-Optional properties:
-- lantiq,gphy-mode	: GPHY_MODE_GE (default) or GPHY_MODE_FE as defined in
-			  <dt-bindings/mips/lantiq_xway_gphy.h>
-
-
--------------------------------------------------------------------------------
-Example for the GPHys on the xRX200 SoCs:
-
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-	gphy0: gphy@20 {
-		compatible = "lantiq,xrx200a2x-gphy";
-		reg = <0x20 0x4>;
-
-		resets = <&reset0 31 30>, <&reset1 7 7>;
-		reset-names = "gphy", "gphy2";
-		clocks = <&pmu0 XRX200_PMU_GATE_GPHY>;
-		lantiq,gphy-mode = <GPHY_MODE_GE>;
-	};
diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
index 7f0822b4beae..58d51f480c9e 100644
--- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
@@ -26,24 +26,6 @@ Example of the RCU bindings on a xRX200 SoC:
 		ranges = <0x0 0x203000 0x100>;
 		big-endian;
 
-		gphy0: gphy@20 {
-			compatible = "lantiq,xrx200a2x-gphy";
-			reg = <0x20 0x4>;
-
-			resets = <&reset0 31 30>, <&reset1 7 7>;
-			reset-names = "gphy", "gphy2";
-			lantiq,gphy-mode = <GPHY_MODE_GE>;
-		};
-
-		gphy1: gphy@68 {
-			compatible = "lantiq,xrx200a2x-gphy";
-			reg = <0x68 0x4>;
-
-			resets = <&reset0 29 28>, <&reset1 6 6>;
-			reset-names = "gphy", "gphy2";
-			lantiq,gphy-mode = <GPHY_MODE_GE>;
-		};
-
 		reset0: reset-controller@10 {
 			compatible = "lantiq,xrx200-reset";
 			reg = <0x10 4>, <0x14 4>;
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index a84c24d894aa..9036ef9ec74a 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -206,7 +206,6 @@ config ATH79
 	select COMMON_CLK
 	select CLKDEV_LOOKUP
 	select IRQ_MIPS_CPU
-	select MIPS_MACHINE
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -391,7 +390,7 @@ config MACH_INGENIC
 	select GPIOLIB
 	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
-	select BUILTIN_DTB
+	select BUILTIN_DTB if MIPS_NO_APPENDED_DTB
 	select USE_OF
 	select LIBFDT
 
@@ -676,6 +675,7 @@ config SGI_IP27
 	select DEFAULT_SGI_PARTITION
 	select SYS_HAS_EARLY_PRINTK
 	select HAVE_PCI
+	select IRQ_MIPS_CPU
 	select NR_CPUS_DEFAULT_64