Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "Bindings:

   - Enable dtc "interrupt_provider" warnings for binding examples. Fix
     the warnings in fsl,mu-msi and ti,sci-inta due to this.

   - Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
     altr,fpga-passive-serial to DT schema format

   - Add some documentation on the different forms of YAML text blocks
     which are a constant source of review comments

   - Fix some schema errors in constraints for arrays

   - Add compatibles for qcom,sar2130p-pdc and onnn,adt7462

  DT core:

   - Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n

   - Add some warnings on deprecated address handling

   - Rework early_init_dt_scan() so the arch can pass in the phys
     address of the DTB as __pa() is not always valid to use. This fixes
     a warning for arm64 with kexec.

   - Add and use some new DT graph iterators for iterating over ports
     and endpoints

   - Rework reserved-memory handling to be sized dynamically for fixed
     regions

   - Optimize of_modalias() to avoid a strlen() call

   - Constify struct device_node and property pointers where ever
     possible"

* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
  of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
  dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
  of/address: Rework bus matching to avoid warnings
  of: WARN on deprecated #address-cells/#size-cells handling
  of/fdt: Don't use default address cell sizes for address translation
  dt-bindings: Enable dtc "interrupt_provider" warnings
  of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
  dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
  dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
  dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
  media: xilinx-tpg: use new of_graph functions
  fbdev: omapfb: use new of_graph functions
  gpu: drm: omapdrm: use new of_graph functions
  ASoC: audio-graph-card2: use new of_graph functions
  ASoC: audio-graph-card: use new of_graph functions
  ASoC: test-component: use new of_graph functions
  of: property: use new of_graph functions
  of: property: add of_graph_get_next_port_endpoint()
  of: property: add of_graph_get_next_port()
  of: module: remove strlen() call in of_modalias()
  ...

78 files changed, 786 insertions, 483 deletions

diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index bf7d64632e20..8390d6c00030 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -56,7 +56,6 @@ DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_all_cmd)))
 override DTC_FLAGS := \
 	-Wno-avoid_unnecessary_addr_size \
 	-Wno-graph_child_address \
-	-Wno-interrupt_provider \
 	-Wno-unique_unit_address \
 	-Wunique_unit_address_if_enabled
 
diff --git a/Documentation/devicetree/bindings/cache/l2c2x0.yaml b/Documentation/devicetree/bindings/cache/l2c2x0.yaml
index d7840a5c4037..10c1a900202f 100644
--- a/Documentation/devicetree/bindings/cache/l2c2x0.yaml
+++ b/Documentation/devicetree/bindings/cache/l2c2x0.yaml
@@ -100,9 +100,8 @@ properties:
       filter. Addresses in the filter window are directed to the M1 port. Other
       addresses will go to the M0 port.
     $ref: /schemas/types.yaml#/definitions/uint32-array
-    items:
-      minItems: 2
-      maxItems: 2
+    minItems: 2
+    maxItems: 2
 
   arm,io-coherent:
     description: indicates that the system is operating in an hardware
diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
index 68ea5f70b75f..ee7edc6f60e2 100644
--- a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
+++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
@@ -39,11 +39,11 @@ properties:
 
   reg:
     minItems: 2
-    maxItems: 9
+    maxItems: 10
 
   reg-names:
     minItems: 2
-    maxItems: 9
+    maxItems: 10
 
   interrupts:
     maxItems: 1
@@ -134,6 +134,36 @@ allOf:
               - qcom,qdu1000-llcc
               - qcom,sc8180x-llcc
               - qcom,sc8280xp-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC4 base register region
+            - description: LLCC5 base register region
+            - description: LLCC6 base register region
+            - description: LLCC7 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc4_base
+            - const: llcc5_base
+            - const: llcc6_base
+            - const: llcc7_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,x1e80100-llcc
     then:
       properties:
@@ -148,6 +178,7 @@ allOf:
             - description: LLCC6 base register region
             - description: LLCC7 base register region
             - description: LLCC broadcast base register region
+            - description: LLCC broadcast AND register region
         reg-names:
           items:
             - const: llcc0_base
@@ -159,6 +190,7 @@ allOf:
             - const: llcc6_base
             - const: llcc7_base
             - const: llcc_broadcast_base
+            - const: llcc_broadcast_and_base
 
   - if:
       properties:
diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
index ea700f8ee6c6..fde5160b5d29 100644
--- a/Documentation/devicetree/bindings/dma/dma-common.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
@@ -32,10 +32,9 @@ properties:
       The first item in the array is for channels 0-31, the second is for
       channels 32-63, etc.
     $ref: /schemas/types.yaml#/definitions/uint32-array
-    items:
-      minItems: 1
-      # Should be enough
-      maxItems: 255
+    minItems: 1
+    # Should be enough
+    maxItems: 255
 
   dma-channels:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml
index a41f9b9a196b..484f8babcda4 100644
--- a/Documentation/devicetree/bindings/example-schema.yaml
+++ b/Documentation/devicetree/bindings/example-schema.yaml
@@ -262,4 +262,5 @@ examples:
         reg-names = "core", "aux";
         interrupts = <10>;
         interrupt-controller;
+        #interrupt-cells = <2>;
     };
diff --git a/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt b/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt
deleted file mode 100644
index 48478bc07e29..000000000000
--- a/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Altera Passive Serial SPI FPGA Manager
-
-Altera FPGAs support a method of loading the bitstream over what is
-referred to as "passive serial".
-The passive serial link is not technically SPI, and might require extra
-circuits in order to play nicely with other SPI slaves on the same bus.
-
-See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf
-
-Required properties:
-- compatible: Must be one of the following:
-	"altr,fpga-passive-serial",
-	"altr,fpga-arria10-passive-serial"
-- reg: SPI chip select of the FPGA
-- nconfig-gpios: config pin (referred to as nCONFIG in the manual)
-- nstat-gpios: status pin (referred to as nSTATUS in the manual)
-
-Optional properties:
-- confd-gpios: confd pin (referred to as CONF_DONE in the manual)
-
-Example:
-	fpga: fpga@0 {
-		compatible = "altr,fpga-passive-serial";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
-		nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
-		confd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml b/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml
new file mode 100644
index 000000000000..ffb7cc54556f
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/altr,fpga-passive-serial.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera Passive Serial SPI FPGA Manager
+
+maintainers:
+  - Fabio Estevam <festevam@denx.de>
+
+description: |
+  Altera FPGAs support a method of loading the bitstream over what is
+  referred to as "passive serial".
+  The passive serial link is not technically SPI, and might require extra
+  circuits in order to play nicely with other SPI slaves on the same bus.
+
+  See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - altr,fpga-passive-serial
+      - altr,fpga-arria10-passive-serial
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  reg:
+    maxItems: 1
+
+  nconfig-gpios:
+    description:
+      Config pin (referred to as nCONFIG in the manual).
+    maxItems: 1
+
+  nstat-gpios:
+    description:
+      Status pin (referred to as nSTATUS in the manual).
+    maxItems: 1
+
+  confd-gpios:
+    description:
+      confd pin (referred to as CONF_DONE in the manual)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - nconfig-gpios
+  - nstat-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      fpga@0 {
+        compatible = "altr,fpga-passive-serial";
+        reg = <0>;
+        nconfig-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+        nstat-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+        confd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt
deleted file mode 100644
index 43ef770dfeb9..000000000000
--- a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Zodiac Inflight Innovations RAVE Supervisory Processor Power Button Bindings
-
-RAVE SP input device is a "MFD cell" device corresponding to power
-button functionality of RAVE Supervisory Processor. It is expected
-that its Device Tree node is specified as a child of the node
-corresponding to the parent RAVE SP device (as documented in
-Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
-
-Required properties:
-
-- compatible: Should be "zii,rave-sp-pwrbutton"
-
-Example:
-
-	rave-sp {
-		compatible = "zii,rave-sp-rdu1";
-		current-speed = <38400>;
-
-		pwrbutton {
-			compatible = "zii,rave-sp-pwrbutton";
-		};
-	}
diff --git a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml
new file mode 100644
index 000000000000..b26e6fe174f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/zii,rave-sp-pwrbutton.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zodiac Inflight Innovations RAVE Supervisory Processor Power Button
+
+maintainers:
+  - Frank Li <Frank.li@nxp.com>
+
+description:
+  RAVE SP input device is a "MFD cell" device corresponding to power
+  button functionality of RAVE Supervisory Processor. It is expected
+  that its Device Tree node is specified as a child of the node
+  corresponding to the parent RAVE SP device (as documented in
+  Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml)
+
+properties:
+  compatible:
+    const: zii,rave-sp-pwrbutton
+
+required:
+  - compatible
+
+allOf:
+  - $ref: input.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pwrbutton {
+        compatible = "zii,rave-sp-pwrbutton";
+    };
+
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
index 5f051c666cbe..f3247a47f9ee 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -132,10 +132,9 @@ properties:
       Address property. Base address of an alias of the GICD region containing
       only the {SET,CLR}SPI registers to be used if isolation is required,
       and if supported by the HW.
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-    items:
-      minItems: 1
-      maxItems: 2
+    oneOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - $ref: /schemas/types.yaml#/definitions/uint64
 
   ppi-partitions:
     type: object
@@ -223,9 +222,8 @@ patternProperties:
           (u32, u32) tuple describing the untranslated
           address and size of the pre-ITS window.
         $ref: /schemas/types.yaml#/definitions/uint32-array
-        items:
-          minItems: 2
-          maxItems: 2
+        minItems: 2
+        maxItems: 2
 
     required:
       - compatible
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
index 799ae5c3e32a..b5282c857f44 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
@@ -62,8 +62,6 @@ properties:
       - const: processor-a-side
       - const: processor-b-side
 
-  interrupt-controller: true
-
   msi-controller: true
 
   "#msi-cells":
@@ -73,7 +71,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - interrupt-controller
   - msi-controller
   - "#msi-cells"
 
@@ -88,7 +85,6 @@ examples:
         compatible = "fsl,imx6sx-mu-msi";
         msi-controller;
         #msi-cells = &l