Merge branch 'clk-unused' into clk-next

 - Remove efm32 clk driver
 - Remove tango4 clk driver
 - Remove zte zx clk driver
 - Remove sirf prima2/atlast clk drivers
 - Remove u300 clk driver

* clk-unused:
  clk: remove u300 driver
  clk: remove sirf prima2/atlas drivers
  clk: remove zte zx driver
  clk: remove tango4 driver
  clk: Drop unused efm32gg driver

24 files changed, 0 insertions, 7377 deletions

diff --git a/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt b/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt
deleted file mode 100644
index 54d6d1358339..000000000000
--- a/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Clock and reset bindings for CSR atlas7
-
-Required properties:
-- compatible: Should be "sirf,atlas7-car"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- #reset-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.
-The ID list atlas7_clks defined in drivers/clk/sirf/clk-atlas7.c
-
-The reset consumer should specify the desired reset by having the reset
-ID in its "reset" phandle cell.
-The ID list atlas7_reset_unit defined in drivers/clk/sirf/clk-atlas7.c
-
-Examples: Clock and reset controller node:
-
-car: clock-controller@18620000 {
-	compatible = "sirf,atlas7-car";
-	reg = <0x18620000 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
-
-Examples: Consumers using clock or reset:
-
-timer@10dc0000 {
-	compatible = "sirf,macro-tick";
-	reg = <0x10dc0000 0x1000>;
-	clocks = <&car 54>;
-	interrupts = <0 0 0>,
-		   <0 1 0>,
-		   <0 2 0>,
-		   <0 49 0>,
-		   <0 50 0>,
-		   <0 51 0>;
-};
-
-uart1: uart@18020000 {
-	cell-index = <1>;
-	compatible = "sirf,macro-uart";
-	reg = <0x18020000 0x1000>;
-	clocks = <&clks 95>;
-	interrupts = <0 18 0>;
-	fifosize = <32>;
-};
-
-vpp@13110000 {
-	compatible = "sirf,prima2-vpp";
-	reg = <0x13110000 0x10000>;
-	interrupts = <0 31 0>;
-	clocks = <&car 85>;
-	resets = <&car 29>;
-};
diff --git a/Documentation/devicetree/bindings/clock/prima2-clock.txt b/Documentation/devicetree/bindings/clock/prima2-clock.txt
deleted file mode 100644
index 5016979c0f78..000000000000
--- a/Documentation/devicetree/bindings/clock/prima2-clock.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-* Clock bindings for CSR SiRFprimaII
-
-Required properties:
-- compatible: Should be "sirf,prima2-clkc"
-- reg: Address and length of the register set
-- interrupts: Should contain clock controller interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of prima2
-clocks and IDs.
-
-	Clock			ID
-	---------------------------
-	rtc			0
-	osc             	1
-	pll1            	2
-	pll2            	3
-	pll3            	4
-	mem             	5
-	sys             	6
-	security        	7
-	dsp             	8
-	gps             	9
-	mf              	10
-	io              	11
-	cpu             	12
-	uart0           	13
-	uart1           	14
-	uart2           	15
-	tsc             	16
-	i2c0            	17
-	i2c1            	18
-	spi0            	19
-	spi1            	20
-	pwmc            	21
-	efuse           	22
-	pulse           	23
-	dmac0           	24
-	dmac1           	25
-	nand            	26
-	audio           	27
-	usp0            	28
-	usp1            	29
-	usp2            	30
-	vip             	31
-	gfx             	32
-	mm              	33
-	lcd             	34
-	vpp             	35
-	mmc01           	36
-	mmc23           	37
-	mmc45           	38
-	usbpll          	39
-	usb0            	40
-	usb1			41
-
-Examples:
-
-clks: clock-controller@88000000 {
-	compatible = "sirf,prima2-clkc";
-	reg = <0x88000000 0x1000>;
-	interrupts = <3>;
-	#clock-cells = <1>;
-};
-
-i2c0: i2c@b00e0000 {
-	cell-index = <0>;
-	compatible = "sirf,prima2-i2c";
-	reg = <0xb00e0000 0x10000>;
-	interrupts = <24>;
-	clocks = <&clks 17>;
-};
diff --git a/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
deleted file mode 100644
index 7cafcb98ead7..000000000000
--- a/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-Clock bindings for ST-Ericsson U300 System Controller Clocks
-
-Bindings for the gated system controller clocks:
-
-Required properties:
-- compatible: must be "stericsson,u300-syscon-clk"
-- #clock-cells: must be <0>
-- clock-type: specifies the type of clock:
-  0 = slow clock
-  1 = fast clock
-  2 = rest/remaining clock
-- clock-id: specifies the clock in the type range
-
-Optional properties:
-- clocks: parent clock(s)
-
-The available clocks per type are as follows:
-
-Type:  ID:   Clock:
--------------------
-0      0     Slow peripheral bridge clock
-0      1     UART0 clock
-0      4     GPIO clock
-0      6     RTC clock
-0      7     Application timer clock
-0      8     Access timer clock
-
-1      0     Fast peripheral bridge clock
-1      1     I2C bus 0 clock
-1      2     I2C bus 1 clock
-1      5     MMC interface peripheral (silicon) clock
-1      6     SPI clock
-
-2      3     CPU clock
-2      4     DMA controller clock
-2      5     External Memory Interface (EMIF) clock
-2      6     NAND flask interface clock
-2      8     XGAM graphics engine clock
-2      9     Shared External Memory Interface (SEMI) clock
-2      10    AHB Subsystem Bridge clock
-2      12    Interrupt controller clock
-
-Example:
-
-gpio_clk: gpio_clk@13M {
-	#clock-cells = <0>;
-	compatible = "stericsson,u300-syscon-clk";
-	clock-type = <0>; /* Slow */
-	clock-id = <4>;
-	clocks = <&slow_clk>;
-};
-
-gpio: gpio@c0016000 {
-	compatible = "stericsson,gpio-coh901";
-	(...)
-	clocks = <&gpio_clk>;
-};
-
-
-Bindings for the MMC/SD card clock:
-
-Required properties:
-- compatible: must be "stericsson,u300-syscon-mclk"
-- #clock-cells: must be <0>
-
-Optional properties:
-- clocks: parent clock(s)
-
-mmc_mclk: mmc_mclk {
-	#clock-cells = <0>;
-	compatible = "stericsson,u300-syscon-mclk";
-	clocks = <&mmc_pclk>;
-};
-
-mmcsd: mmcsd@c0001000 {
-	compatible = "arm,pl18x", "arm,primecell";
-	clocks = <&mmc_pclk>, <&mmc_mclk>;
-	clock-names = "apb_pclk", "mclk";
-	(...)
-};
diff --git a/Documentation/devicetree/bindings/clock/tango4-clock.txt b/Documentation/devicetree/bindings/clock/tango4-clock.txt
deleted file mode 100644
index 19c580a7bda2..000000000000
--- a/Documentation/devicetree/bindings/clock/tango4-clock.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Sigma Designs Tango4 Clock Generator
-
-The Tango4 clock generator outputs cpu_clk and sys_clk (the latter is used
-for RAM and various peripheral devices). The clock binding described here
-is applicable to all Tango4 SoCs.
-
-Required Properties:
-
-- compatible: should be "sigma,tango4-clkgen".
-- reg: physical base address of the device and length of memory mapped region.
-- clocks: phandle of the input clock (crystal oscillator).
-- clock-output-names: should be "cpuclk" and "sysclk".
-- #clock-cells: should be set to 1.
-
-Example:
-
-	clkgen: clkgen@10000 {
-		compatible = "sigma,tango4-clkgen";
-		reg = <0x10000 0x40>;
-		clocks = <&xtal>;
-		clock-output-names = "cpuclk", "sysclk";
-		#clock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/zx296702-clk.txt b/Documentation/devicetree/bindings/clock/zx296702-clk.txt
deleted file mode 100644
index 5c91c9e4f1be..000000000000
--- a/Documentation/devicetree/bindings/clock/zx296702-clk.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Device Tree Clock bindings for ZTE zx296702
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
-	"zte,zx296702-topcrm-clk":
-		zx296702 top clock selection, divider and gating
-
-	"zte,zx296702-lsp0crpm-clk" and
-	"zte,zx296702-lsp1crpm-clk":
-		zx296702 device level clock selection and gating
-
-- reg: Address and length of the register set
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h
-for the full list of zx296702 clock IDs.
-
-
-topclk: topcrm@09800000 {
-        compatible = "zte,zx296702-topcrm-clk";
-        reg = <0x09800000 0x1000>;
-        #clock-cells = <1>;
-};
-
-uart0: serial@09405000 {
-        compatible = "zte,zx296702-uart";
-        reg = <0x09405000 0x1000>;
-        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&lsp1clk ZX296702_UART0_PCLK>;
-};
diff --git a/Documentation/devicetree/bindings/clock/zx296718-clk.txt b/Documentation/devicetree/bindings/clock/zx296718-clk.txt
deleted file mode 100644
index 3a46bf0b2540..000000000000
--- a/Documentation/devicetree/bindings/clock/zx296718-clk.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Device Tree Clock bindings for ZTE zx296718
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
-	"zte,zx296718-topcrm":
-		zx296718 top clock selection, divider and gating
-
-	"zte,zx296718-lsp0crm" and
-	"zte,zx296718-lsp1crm":
-		zx296718 device level clock selection and gating
-
-	"zte,zx296718-audiocrm":
-		zx296718 audio clock selection, divider and gating
-
-- reg: Address and length of the register set
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296718-clock.h
-for the full list of zx296718 clock IDs.
-
-
-topclk: topcrm@1461000 {
-        compatible = "zte,zx296718-topcrm-clk";
-        reg = <0x01461000 0x1000>;
-        #clock-cells = <1>;
-};
-
-usbphy0:usb-phy0 {
-	compatible = "zte,zx296718-usb-phy";
-	#phy-cells = <0>;
-	clocks = <&topclk USB20_PHY_CLK>;
-	clock-names = "phyclk";
-};
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 074e2233f445..5325847469e9 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o
 obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
-obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
 obj-$(CONFIG_ARCH_SPARX5)		+= clk-sparx5.o
 obj-$(CONFIG_COMMON_CLK_FIXED_MMIO)	+= clk-fixed-mmio.o
 obj-$(CONFIG_COMMON_CLK_FSL_FLEXSPI)	+= clk-fsl-flexspi.o
@@ -63,9 +62,7 @@ obj-$(CONFIG_COMMON_CLK_SI570)		+= clk-si570.o
 obj-$(CONFIG_COMMON_CLK_STM32F)		+= clk-stm32f4.o
 obj-$(CONFIG_COMMON_CLK_STM32H7)	+= clk-stm32h7.o
 obj-$(CONFIG_COMMON_CLK_STM32MP157)	+= clk-stm32mp1.o
-obj-$(CONFIG_ARCH_TANGO)		+= clk-tango4.o
 obj-$(CONFIG_CLK_TWL6040)		+= clk-twl6040.o
-obj-$(CONFIG_ARCH_U300)			+= clk-u300.o
 obj-$(CONFIG_ARCH_VT8500)		+= clk-vt8500.o
 obj-$(CONFIG_COMMON_CLK_VC5)		+= clk-versaclock5.o
 obj-$(CONFIG_COMMON_CLK_WM831X)		+= clk-wm831x.o
@@ -105,7 +102,6 @@ obj-y					+= renesas/
 obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
 obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/
 obj-$(CONFIG_CLK_SIFIVE)		+= sifive/
-obj-$(CONFIG_ARCH_SIRF)			+= sirf/
 obj-$(CONFIG_ARCH_SOCFPGA)		+= socfpga/
 obj-$(CONFIG_ARCH_AGILEX)		+= socfpga/
 obj-$(CONFIG_ARCH_STRATIX10)		+= socfpga/
@@ -123,6 +119,5 @@ ifeq ($(CONFIG_COMMON_CLK), y)
 obj-$(CONFIG_X86)			+= x86/
 endif
 obj-y					+= xilinx/
-obj-$(CONFIG_ARCH_ZX)			+= zte/
 obj-$(CONFIG_ARCH_ZYNQ)			+= zynq/
 obj-$(CONFIG_COMMON_CLK_ZYNQMP)         += zynqmp/
diff --git a/drivers/clk/clk-efm32gg.c b/drivers/clk/clk-efm32gg.c
deleted file mode 100644
index 85beaacb4088..000000000000
--- a/drivers/clk/clk-efm32gg.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/io.h>
-#include <linux/clk-provider.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/slab.h>
-
-#include <dt-bindings/clock/efm32-cmu.h>
-
-#define CMU_HFPERCLKEN0		0x44
-#define CMU_MAX_CLKS		37
-
-static struct clk_hw_onecell_data *clk_data;
-
-static void __init efm32gg_cmu_init(struct device_node *np)
-{
-	int i;
-	void __iomem *base;
-	struct clk_hw **hws;
-
-	clk_data = kzalloc(struct_size(clk_data, hws, CMU_MAX_CLKS),
-			   GFP_KERNEL);
-
-	if (!clk_data)
-		return;
-
-	hws = clk_data->hws;
-
-	for (i = 0; i < CMU_MAX_CLKS; ++i)
-		hws[i] = ERR_PTR(-ENOENT);
-
-	base = of_iomap(np, 0);
-	if (!base) {
-		pr_warn("Failed to map address range for efm32gg,cmu node\n");
-		return;
-	}
-
-	hws[clk_HFXO] = clk_hw_register_fixed_rate(NULL, "HFXO", NULL, 0,
-						   48000000);
-
-	hws[clk_HFPERCLKUSART0] = clk_hw_register_gate(NULL, "HFPERCLK.USART0",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 0, 0, NULL);
-	hws[clk_HFPERCLKUSART1] = clk_hw_register_gate(NULL, "HFPERCLK.USART1",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 1, 0, NULL);
-	hws[clk_HFPERCLKUSART2] = clk_hw_register_gate(NULL, "HFPERCLK.USART2",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 2, 0, NULL);
-	hws[clk_HFPERCLKUART0] = clk_hw_register_gate(NULL, "HFPERCLK.UART0",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 3, 0, NULL);
-	hws[clk_HFPERCLKUART1] = clk_hw_register_gate(NULL, "HFPERCLK.UART1",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 4, 0, NULL);
-	hws[clk_HFPERCLKTIMER0] = clk_hw_register_gate(NULL, "HFPERCLK.TIMER0",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 5, 0, NULL);
-	hws[clk_HFPERCLKTIMER1] = clk_hw_register_gate(NULL, "HFPERCLK.TIMER1",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 6, 0, NULL);
-	hws[clk_HFPERCLKTIMER2] = clk_hw_register_gate(NULL, "HFPERCLK.TIMER2",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 7, 0, NULL);
-	hws[clk_HFPERCLKTIMER3] = clk_hw_register_gate(NULL, "HFPERCLK.TIMER3",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 8, 0, NULL);
-	hws[clk_HFPERCLKACMP0] = clk_hw_register_gate(NULL, "HFPERCLK.ACMP0",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 9, 0, NULL);
-	hws[clk_HFPERCLKACMP1] = clk_hw_register_gate(NULL, "HFPERCLK.ACMP1",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 10, 0, NULL);
-	hws[clk_HFPERCLKI2C0] = clk_hw_register_gate(NULL, "HFPERCLK.I2C0",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 11, 0, NULL);
-	hws[clk_HFPERCLKI2C1] = clk_hw_register_gate(NULL, "HFPERCLK.I2C1",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 12, 0, NULL);
-	hws[clk_HFPERCLKGPIO] = clk_hw_register_gate(NULL, "HFPERCLK.GPIO",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 13, 0, NULL);
-	hws[clk_HFPERCLKVCMP] = clk_hw_register_gate(NULL, "HFPERCLK.VCMP",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 14, 0, NULL);
-	hws[clk_HFPERCLKPRS] = clk_hw_register_gate(NULL, "HFPERCLK.PRS",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 15, 0, NULL);
-	hws[clk_HFPERCLKADC0] = clk_hw_register_gate(NULL, "HFPERCLK.ADC0",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 16, 0, NULL);
-	hws[clk_HFPERCLKDAC0] = clk_hw_register_gate(NULL, "HFPERCLK.DAC0",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 17, 0, NULL);
-
-	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
-}
-CLK_OF_DECLARE(efm32ggcmu, "efm32gg,cmu", efm32gg_cmu_init);
diff --git a/drivers/clk/clk-tango4.c b/drivers/clk/clk-tango4.c
deleted file mode 100644
index fe12a43f7a40..000000000000
--- a/drivers/clk/clk-tango4.c
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/clk-provider.h>
-#include <linux/of_address.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define CLK_COUNT 4 /* cpu_clk, sys_clk, usb_clk, sdio_clk */
-static struct clk *clks[CLK_COUNT];
-static struct clk_onecell_data clk_data = { clks, CLK_COUNT };
-
-#define SYSCLK_DIV	0x20
-#define CPUCLK_DIV	0x24
-#define DIV_BYPASS	BIT(23)
-
-/*** CLKGEN_PLL ***/
-#define extract_pll_n(val)	((val >>  0) & ((1u << 7) - 1))
-#define extract_pll_k(val)	((val >> 13) & ((1u << 3) - 1))
-#define extract_pll_m(val)	((val >> 16) & ((1u << 3) - 1))
-#define extract_pll_isel(val)	((val >> 24) & ((1u << 3) - 1))
-
-static void __init make_pll(int idx, const char *parent, void __iomem *base)
-{
-	char name[8];
-	u32 val, mul, div;
-
-	sprintf(name, "pll%d", idx);
-	val = readl(base + idx * 8);
-	mul =  extract_pll_n(val) + 1;
-	div = (extract_pll_m(val) + 1) << extract_pll_k(val);
-	clk_register_fixed_factor(NULL, name, parent, 0, mul, div);
-	if (extract_pll_isel(val) != 1)
-		panic("%s: input not set to XTAL_IN\n", name);
-}
-
-static void __init make_cd(int idx, void __iomem *base)
-{
-	char name[8];
-	u32 val, mul, div;
-
-	sprintf(name, "cd%d", idx);
-	val = readl(base + idx * 8);
-	mul =  1 << 27;
-	div = (2 << 27) + val;
-	clk_register_fixed_factor(NULL, name, "pll2", 0, mul, div);
-	if (val > 0xf0000000)
-		panic("%s: unsupported divider %x\n", name, val);
-}
-
-static void __init tango4_clkgen_setup(struct device_node *np)
-{
-	struct clk **pp = clk_data.clks;
-	void __iomem *base = of_iomap(np, 0);
-	const char *parent = of_clk_get_parent_name(np, 0);
-
-	if (!base)
-		panic("%pOFn: invalid address\n", np);
-
-	if (readl(base + CPUCLK_DIV) & DIV_BYPASS)
-		panic("%pOFn: unsupported cpuclk setup\n", np);
-
-	if (readl(base + SYSCLK_DIV) & DIV_BYPASS)
-		panic("%pOFn: unsupported sysclk setup\n", np);
-
-	writel(0x100, base + CPUCLK_DIV); /* disable frequency ramping */
-
-	make_pll(0, parent, base);
-	make_pll(1, parent, base);
-	make_pll(2, parent, base);
-	make_cd(2, base + 0x80);
-	make_cd(6, base + 0x80);
-
-	pp[0] = clk_register_divider(NULL, "cpu_clk", "pll0", 0,
-			base + CPUCLK_DIV, 8, 8, CLK_DIVIDER_ONE_BASED, NULL);
-	pp[1] = clk_register_fixed_factor(NULL, "sys_clk", "pll1", 0, 1, 4);
-	pp[2] = clk_register_fixed_factor(NULL,  "usb_clk", "cd2", 0, 1, 2);
-	pp[3] = clk_register_fixed_factor(NULL, "sdio_clk", "cd6", 0, 1, 2);
-
-	if (IS_ERR(pp[0]) || IS_ERR(pp[1]) || IS_ERR(pp[2]) || IS_ERR(pp[3]))
-		panic("%pOFn: clk registration failed\n", np);
-
-	if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data))
-		panic("%pOFn: clk provider registration failed\n", np);
-}
-CLK_OF_DECLARE(tango4_clkgen, "sigma,tango4-clkgen", tango4_clkgen_setup);
diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c
deleted file mode 100644
index e228c07c4c6e..000000000000
--- a/drivers/clk/clk-u300.c
+++ /dev/null
@@ -1,1199 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * U300 clock implementation
- * Copyright (C) 2007-2012 ST-Ericsson AB
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- */
-#include <linux/clkdev.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clk-provider.h>
-#include <linux/spinlock.h>
-#include <linux/of.h>
-#include <linux/platform_data/clk-u300.h>
-
-/* APP side SYSCON registers */
-/* CLK Control Register 16bit (R/W) */
-#define U300_SYSCON_CCR						(0x0000)
-#define U300_SYSCON_CCR_I2S1_USE_VCXO				(0x0040)
-#define U300_SYSCON_CCR_I2S0_USE_VCXO				(0x0020)
-#define U300_SYSCON_CCR_TURN_VCXO_ON				(0x0008)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK			(0x0007)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER		(0x04)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW			(0x03)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE		(0x02)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH			(0x01)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST			(0x00)
-/* CLK Status Register 16bit (R/W) */
-#define U300_SYSCON_CSR						(0x0004)
-#define U300_SYSCON_CSR_PLL208_LOCK_IND				(0x0002)
-#define U300_SYSCON_CSR_PLL13_LOCK_IND				(0x0001)
-/* Reset lines for SLOW devices 16bit (R/W) */
-#define U300_SYSCON_RSR						(0x0014)
-#define U300_SYSCON_RSR_PPM_RESET_EN				(0x0200)
-#define U300_SYSCON_RSR_ACC_TMR_RESET_EN			(0x0100)
-#define U300_SYSCON_RSR_APP_TMR_RESET_EN			(0x0080)
-#define U300_SYSCON_RSR_RTC_RESET_EN				(0x0040)
-#define U300_SYSCON_RSR_KEYPAD_RESET_EN				(0x0020)
-#define U300_SYSCON_RSR_GPIO_RESET_EN				(0x0010)
-#define U300_SYSCON_RSR_EH_RESET_EN				(0x0008)
-#define U300_SYSCON_RSR_BTR_RESET_EN				(0x0004)
-#define U300_SYSCON_RSR_UART_RESET_EN				(0x0002)
-#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN			(0x0001)
-/* Reset lines for FAST devices 16bit (R/W) */
-#define U300_SYSCON_RFR						(0x0018)
-#define U300_SYSCON_RFR_UART1_RESET_ENABLE			(0x0080)
-#define U300_SYSCON_RFR_SPI_RESET_ENABLE			(0x0040)
-#define U300_SYSCON_RFR_MMC_RESET_ENABLE			(0x0020)
-#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE			(0x0010)
-#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE			(0x0008)
-#define U300_SYSCON_RFR_I2C1_RESET_ENABLE			(0x0004)
-#define U300_SYSCON_RFR_I2C0_RESET_ENABLE			(0x0002)
-#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE		(0x0001)
-/* Reset lines for the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_RRR						(0x001c)
-#define U300_SYSCON_RRR_CDS_RESET_EN				(0x4000)
-#define U300_SYSCON_RRR_ISP_RESET_EN				(0x2000)
-#define U300_SYSCON_RRR_INTCON_RESET_EN				(0x1000)
-#define U300_SYSCON_RRR_MSPRO_RESET_EN				(0x0800)
-#define U300_SYSCON_RRR_XGAM_RESET_EN				(0x0100)
-#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN			(0x0080)
-#define U300_SYSCON_RRR_NANDIF_RESET_EN				(0x0040)
-#define U300_SYSCON_RRR_EMIF_RESET_EN				(0x0020)
-#define U300_SYSCON_RRR_DMAC_RESET_EN				(0x0010)
-#define U300_SYSCON_RRR_CPU_RESET_EN				(0x0008)
-#define U300_SYSCON_RRR_APEX_RESET_EN				(0x0004)
-#define U300_SYSCON_RRR_AHB_RESET_EN				(0x0002)
-#define U300_SYSCON_RRR_AAIF_RESET_EN				(0x0001)
-/* Clock enable for SLOW peripherals 16bit (R/W) */
-#define U300_SYSCON_CESR					(0x0020)
-#define U300_SYSCON_CESR_PPM_CLK_EN				(0x0200)
-#define U300_SYSCON_CESR_ACC_TMR_CLK_EN				(0x0100)
-#define U300_SYSCON_CESR_APP_TMR_CLK_EN				(0x0080)
-#define U300_SYSCON_CESR_KEYPAD_CLK_EN				(0x0040)
-#define U300_SYSCON_CESR_GPIO_CLK_EN				(0x0010)
-#define U300_SYSCON_CESR_EH_CLK_EN				(0x0008)
-#define U300_SYSCON_CESR_BTR_CLK_EN				(0x0004)
-#define U300_SYSCON_CESR_UART_CLK_EN				(0x0002)
-#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN			(0x0001)
-/* Clock enable for FAST peripherals 16bit (R/W) */
-#define U300_SYSCON_CEFR					(0x0024)
-#define U300_SYSCON_CEFR_UART1_CLK_EN				(0x0200)
-#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN			(0x0100)
-#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN			(0x0080)
-#define U300_SYSCON_CEFR_SPI_CLK_EN				(0x0040)
-#define U300_SYSCON_CEFR_MMC_CLK_EN				(0x0020)
-#define U300_SYSCON_CEFR_I2S1_CLK_EN				(0x0010)
-#define U300_SYSCON_CEFR_I2S0_CLK_EN				(0x0008)
-#define U300_SYSCON_CEFR_I2C1_CLK_EN				(0x0004)
-#define U300_SYSCON_CEFR_I2C0_CLK_EN				(0x0002)
-#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN			(0x0001)
-/* Clock enable for the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_CERR					(0x0028)
-#define U300_SYSCON_CERR_CDS_CLK_EN				(0x2000)
-#define U300_SYSCON_CERR_ISP_CLK_EN				(0x1000)
-#define U300_SYSCON_CERR_MSPRO_CLK_EN				(0x0800)
-#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN		(0x0400)
-#define U300_SYSCON_CERR_SEMI_CLK_EN				(0x0200)
-#define U300_SYSCON_CERR_XGAM_CLK_EN				(0x0100)
-#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN			(0x0080)
-#define U300_SYSCON_CERR_NANDIF_CLK_EN				(0x0040)
-#define U300_SYSCON_CERR_EMIF_CLK_EN				(0x0020)
-#define U300_SYSCON_CERR_DMAC_CLK_EN				(0x0010)
-#define U300_SYSCON_CERR_CPU_CLK_EN				(0x0008)
-#define U300_SYSCON_CERR_APEX_CLK_EN				(0x0004)
-#define U300_SYSCON_CERR_AHB_CLK_EN				(0x0002)
-#define U300_SYSCON_CERR_AAIF_CLK_EN				(0x0001)
-/* Single block clock enable 16bit (-/W) */
-#define U300_SYSCON_SBCER					(0x002c)
-#define U300_SYSCON_SBCER_PPM_CLK_EN				(0x0009)
-#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN			(0x0008)
-#define U300_SYSCON_SBCER_APP_TMR_CLK_EN			(0x0007)
-#define U300_SYSCON_SBCER_KEYPAD_CLK_EN				(0x0006)
-#define U300_SYSCON_SBCER_GPIO_CLK_EN				(0x0004)
-#define U300_SYSCON_SBCER_EH_CLK_EN				(0x0003)
-#define U300_SYSCON_SBCER_BTR_CLK_EN				(0x0002)
-#define U300_SYSCON_SBCER_UART_CLK_EN				(0x0001)
-#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN			(0x0000)
-#define U300_SYSCON_SBCER_UART1_CLK_EN				(0x0019)
-#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN			(0x0018)
-#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN			(0x0017)
-#define U300_SYSCON_SBCER_SPI_CLK_EN				(0x0016)
-#define U300_SYSCON_SBCER_MMC_CLK_EN				(0x0015)
-#define U300_SYSCON_SBCER_I2S1_CLK_EN				(0x0014)
-#define U300_SYSCON_SBCER_I2S0_CLK_EN				(0x0013)
-#define U300_SYSCON_SBCER_I2C1_CLK_EN				(0x0012)
-#define U300_SYSCON_SBCER_I2C0_CLK_EN				(0x0011)
-#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN			(0x0010)
-#define U300_SYSCON_SBCER_CDS_CLK_EN				(0x002D)
-#define U300_SYSCON_SBCER_ISP_CLK_EN				(0x002C)
-#define U300_SYSCON_SBCER_MSPRO_CLK_EN				(0x002B)
-#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN		(0x002A)
-#define U300_SYSCON_SBCER_SEMI_CLK_EN				(0x0029)
-#define U300_SYSCON_SBCER_XGAM_CLK_EN				(0x0028)
-#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN			(0x0027)
-#define U300_SYSCON_SBCER_NANDIF_CLK_EN				(0x0026)
-#define U300_SYSCON_SBCER_EMIF_CLK_EN				(0x0025)
-#define U300_SYSCON_SBCER_DMAC_CLK_EN				(0x0024)
-#define U300_SYSCON_SBCER_CPU_CLK_EN				(0x0023)
-#define U300_SYSCON_SBCER_APEX_CLK_EN				(0x0022)
-#define U300_SYSCON_SBCER_AHB_CLK_EN				(0x0021)
-#define U300_SYSCON_SBCER_AAIF_CLK_EN				(0x0020)
-/* Single block clock disable 16bit (-/W) */
-#define U300_SYSCON_SBCDR					(0x0030)
-/* Same values as above for SBCER */
-/* Clock force SLOW peripherals 16bit (R/W) */
-#define U300_SYSCON_CFSR					(0x003c)
-#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN			(0x0200)
-#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN			(0x0100)
-#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN			(0x0080)
-#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN			(0x0020)
-#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN			(0x0010)
-#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN			(0x0008)
-#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN			(0x0004)
-#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN			(0x0002)
-#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN		(0x0001)
-/* Clock force FAST peripherals 16bit (R/W) */
-#define U300_SYSCON_CFFR					(0x40)
-/* Values not defined. Define if you want to use them. */
-/* Clock force the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_CFRR					(0x44)
-#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN			(0x2000)
-#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN			(0x1000)
-#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN			(0x0800)
-#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN		(0x0400)
-#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN			(0x0200)
-#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN			(0x0100)
-#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN			(0x0080)
-#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN			(0x0040)
-#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN			(0x0020)
-#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN			(0x0010)
-#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN			(0x0008)
-#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN			(0x0004)
-#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN			(0x0002)
-#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN			(0x0001)
-/* PLL208 Frequency Control 16bit (R/W) */
-#define U300_SYSCON_PFCR					(0x48)
-#define U300_SYSCON_PFCR_DPLL_MULT_NUM				(0x000F)
-/* Power Management Control 16bit (R/W) */
-#define U300_SYSCON_PMCR					(0x50)
-#define U300_SYSCON_PMCR_DCON_ENABLE				(0x0002)
-#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE			(0x0001)
-/* Reset Out 16bit (R/W) */
-#define U300_SYSCON_RCR						(0x6c)
-#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE			(0x0001)
-/* EMIF Slew Rate Control 16bit (R/W) */
-#define U300_SYSCON_SRCLR					(0x70)
-#define U300_SYSCON_SRCLR_MASK					(0x03FF)
-#define U300_SYSCON_SRCLR_VALUE					(0x03FF)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B			(0x0200)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A			(0x0100)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B			(0x0080)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A			(0x0040)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B			(0x0020)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A			(0x0010)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B			(0x0008)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A			(0x0004)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B			(0x0002)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A			(0x0001)
-/* EMIF Clock Control Register 16bit (R/W) */
-#define U300_SYSCON_ECCR					(0x0078)
-#define U300_SYSCON_ECCR_MASK					(0x000F)
-#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE		(0x0008)
-#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE	(0x0004)
-#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE		(0x0002)
-#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE		(0x0001)
-/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
-#define U300_SYSCON_MMF0R					(0x90)
-#define U300_SYSCON_MMF0R_MASK					(0x00FF)
-#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK			(0x00F0)
-#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK			(0x000F)
-/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
-#define U300_SYSCON_MMF1R					(0x94)
-#define U300_SYSCON_MMF1R_MASK					(0x00FF)
-#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK			(0x00F0)
-#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK			(0x000F)
-/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
-#define U300_SYSCON_MMCR					(0x9C)
-#define U300_SYSCON_MMCR_MASK					(0x0003)
-#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE			(0x0002)
-#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE			(0x0001)
-/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
-#define U300_SYSCON_S0CCR					(0x120)