Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input layer updates from Dmitry Torokhov:

 - evdev interface has been adjusted to extend the life of timestamps on
   32 bit systems to the year of 2108

 - Synaptics RMI4 driver's PS/2 guest handling ha beed updated to
   improve chances of detecting trackpoints on the pass-through port

 - mms114 touchcsreen controller driver has been updated to support
   generic device properties and work with mms152 cntrollers

 - Goodix driver now supports generic touchscreen properties

 - couple of drivers for AVR32 architecture are gone as the architecture
   support has been removed from the kernel

 - gpio-tilt driver has been removed as there are no mainline users and
   the driver itself is using legacy APIs and relies on platform data

 - MODULE_LINECSE/MODULE_VERSION cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
  Input: goodix - use generic touchscreen_properties
  Input: mms114 - fix typo in definition
  Input: mms114 - use BIT() macro instead of explicit shifting
  Input: mms114 - replace mdelay with msleep
  Input: mms114 - add support for mms152
  Input: mms114 - drop platform data and use generic APIs
  Input: mms114 - mark as direct input device
  Input: mms114 - do not clobber interrupt trigger
  Input: edt-ft5x06 - fix error handling for factory mode on non-M06
  Input: stmfts - set IRQ_NOAUTOEN to the irq flag
  Input: auo-pixcir-ts - delete an unnecessary return statement
  Input: auo-pixcir-ts - remove custom log for a failed memory allocation
  Input: da9052_tsi - remove unused mutex
  Input: docs - use PROPERTY_ENTRY_U32() directly
  Input: synaptics-rmi4 - log when we create a guest serio port
  Input: synaptics-rmi4 - unmask F03 interrupts when port is opened
  Input: synaptics-rmi4 - do not delete interrupt memory too early
  Input: ad7877 - use managed resource allocations
  Input: stmfts,s6sy671 - add SPDX identifier
  Input: remove atmel-wm97xx touchscreen driver
  ...

65 files changed, 491 insertions, 1746 deletions

diff --git a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt b/Documentation/devicetree/bindings/input/touchscreen/mms114.txt
index 89d4c56c5671..2cd954051d29 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/mms114.txt
@@ -1,17 +1,23 @@
-* MELFAS MMS114 touchscreen controller
+* MELFAS MMS114/MMS152 touchscreen controller
 
 Required properties:
-- compatible: must be "melfas,mms114"
+- compatible: should be one of:
+	- "melfas,mms114"
+	- "melfas,mms152"
 - reg: I2C address of the chip
 - interrupts: interrupt to which the chip is connected
-- x-size: horizontal resolution of touchscreen
-- y-size: vertical resolution of touchscreen
+- touchscreen-size-x: See [1]
+- touchscreen-size-y: See [1]
 
 Optional properties:
-- contact-threshold:
-- moving-threshold:
-- x-invert: invert X axis
-- y-invert: invert Y axis
+- touchscreen-fuzz-x: See [1]
+- touchscreen-fuzz-y: See [1]
+- touchscreen-fuzz-pressure: See [1]
+- touchscreen-inverted-x: See [1]
+- touchscreen-inverted-y: See [1]
+- touchscreen-swapped-x-y: See [1]
+
+[1]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
 
 Example:
 
@@ -22,12 +28,13 @@ Example:
 			compatible = "melfas,mms114";
 			reg = <0x48>;
 			interrupts = <39 0>;
-			x-size = <720>;
-			y-size = <1280>;
-			contact-threshold = <10>;
-			moving-threshold = <10>;
-			x-invert;
-			y-invert;
+			touchscreen-size-x = <720>;
+			touchscreen-size-y = <1280>;
+			touchscreen-fuzz-x = <10>;
+			touchscreen-fuzz-y = <10>;
+			touchscreen-fuzz-pressure = <10>;
+			touchscreen-inverted-x;
+			touchscreen-inverted-y;
 		};
 
 		/* ... */
diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
index 6aa625e0cb8d..84752de12412 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
@@ -23,6 +23,8 @@ Optional properties:
 - touchscreen-inverted-y  : See touchscreen.txt
 - touchscreen-swapped-x-y : See touchscreen.txt
 - silead,max-fingers	  : maximum number of fingers the touchscreen can detect
+- silead,home-button	  : Boolean, set to true on devices which have a
+			    capacitive home-button build into the touchscreen
 - vddio-supply		  : regulator phandle for controller VDDIO
 - avdd-supply		  : regulator phandle for controller AVDD
 
diff --git a/Documentation/gpio/drivers-on-gpio.txt b/Documentation/gpio/drivers-on-gpio.txt
index 9a78d385b92e..a2ccbab12eb7 100644
--- a/Documentation/gpio/drivers-on-gpio.txt
+++ b/Documentation/gpio/drivers-on-gpio.txt
@@ -28,11 +28,6 @@ hardware descriptions such as device tree or ACPI:
 - gpio-beeper: drivers/input/misc/gpio-beeper.c is used to provide a beep from
   an external speaker connected to a GPIO line.
 
-- gpio-tilt-polled: drivers/input/misc/gpio_tilt_polled.c provides tilt
-  detection switches using GPIO, which is useful for your homebrewn pinball
-  machine if for nothing else. It can detect different tilt angles of the
-  monitored object.
-
 - extcon-gpio: drivers/extcon/extcon-gpio.c is used when you need to read an
   external connector status, such as a headset line for an audio driver or an
   HDMI connector. It will provide a better userspace sysfs interface than GPIO.
diff --git a/Documentation/input/devices/gpio-tilt.rst b/Documentation/input/devices/gpio-tilt.rst
deleted file mode 100644
index fa6e64570aa7..000000000000
--- a/Documentation/input/devices/gpio-tilt.rst
+++ /dev/null
@@ -1,103 +0,0 @@
-Driver for tilt-switches connected via GPIOs
-============================================
-
-Generic driver to read data from tilt switches connected via gpios.
-Orientation can be provided by one or more than one tilt switches,
-i.e. each tilt switch providing one axis, and the number of axes
-is also not limited.
-
-
-Data structures
----------------
-
-The array of struct gpio in the gpios field is used to list the gpios
-that represent the current tilt state.
-
-The array of struct gpio_tilt_axis describes the axes that are reported
-to the input system. The values set therein are used for the
-input_set_abs_params calls needed to init the axes.
-
-The array of struct gpio_tilt_state maps gpio states to the corresponding
-values to report. The gpio state is represented as a bitfield where the
-bit-index corresponds to the index of the gpio in the struct gpio array.
-In the same manner the values stored in the axes array correspond to
-the elements of the gpio_tilt_axis-array.
-
-
-Example
--------
-
-Example configuration for a single TS1003 tilt switch that rotates around
-one axis in 4 steps and emits the current tilt via two GPIOs::
-
-    static int sg060_tilt_enable(struct device *dev) {
-	    /* code to enable the sensors */
-    };
-
-    static void sg060_tilt_disable(struct device *dev) {
-	    /* code to disable the sensors */
-    };
-
-    static struct gpio sg060_tilt_gpios[] = {
-	    { SG060_TILT_GPIO_SENSOR1, GPIOF_IN, "tilt_sensor1" },
-	    { SG060_TILT_GPIO_SENSOR2, GPIOF_IN, "tilt_sensor2" },
-    };
-
-    static struct gpio_tilt_state sg060_tilt_states[] = {
-	    {
-		    .gpios = (0 << 1) | (0 << 0),
-		    .axes = (int[]) {
-			    0,
-		    },
-	    }, {
-		    .gpios = (0 << 1) | (1 << 0),
-		    .axes = (int[]) {
-			    1, /* 90 degrees */
-		    },
-	    }, {
-		    .gpios = (1 << 1) | (1 << 0),
-		    .axes = (int[]) {
-			    2, /* 180 degrees */
-		    },
-	    }, {
-		    .gpios = (1 << 1) | (0 << 0),
-		    .axes = (int[]) {
-			    3, /* 270 degrees */
-		    },
-	    },
-    };
-
-    static struct gpio_tilt_axis sg060_tilt_axes[] = {
-	    {
-		    .axis = ABS_RY,
-		    .min = 0,
-		    .max = 3,
-		    .fuzz = 0,
-		    .flat = 0,
-	    },
-    };
-
-    static struct gpio_tilt_platform_data sg060_tilt_pdata= {
-	    .gpios = sg060_tilt_gpios,
-	    .nr_gpios = ARRAY_SIZE(sg060_tilt_gpios),
-
-	    .axes = sg060_tilt_axes,
-	    .nr_axes = ARRAY_SIZE(sg060_tilt_axes),
-
-	    .states = sg060_tilt_states,
-	    .nr_states = ARRAY_SIZE(sg060_tilt_states),
-
-	    .debounce_interval = 100,
-
-	    .poll_interval = 1000,
-	    .enable = sg060_tilt_enable,
-	    .disable = sg060_tilt_disable,
-    };
-
-    static struct platform_device sg060_device_tilt = {
-	    .name = "gpio-tilt-polled",
-	    .id = -1,
-	    .dev = {
-		    .platform_data = &sg060_tilt_pdata,
-	    },
-    };
diff --git a/Documentation/input/devices/rotary-encoder.rst b/Documentation/input/devices/rotary-encoder.rst
index b07b20a295ac..810ae02bdaa0 100644
--- a/Documentation/input/devices/rotary-encoder.rst
+++ b/Documentation/input/devices/rotary-encoder.rst
@@ -108,9 +108,9 @@ example below:
 	};
 
 	static const struct property_entry rotary_encoder_properties[] __initconst = {
-		PROPERTY_ENTRY_INTEGER("rotary-encoder,steps-per-period", u32, 24),
-		PROPERTY_ENTRY_INTEGER("linux,axis",			  u32, ABS_X),
-		PROPERTY_ENTRY_INTEGER("rotary-encoder,relative_axis",	  u32, 0),
+		PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24),
+		PROPERTY_ENTRY_U32("linux,axis",		      ABS_X),
+		PROPERTY_ENTRY_U32("rotary-encoder,relative_axis",    0),
 		{ },
 	};
 
diff --git a/Documentation/input/ff.rst b/Documentation/input/ff.rst
index 26d461998e08..0c02e87ee86d 100644
--- a/Documentation/input/ff.rst
+++ b/Documentation/input/ff.rst
@@ -31,7 +31,7 @@ To enable force feedback, you have to:
 
 Before you start, let me WARN you that some devices shake violently during the
 initialisation phase. This happens for example with my "AVB Top Shot Pegasus".
-To stop this annoying behaviour, move you joystick to its limits. Anyway, you
+To stop this annoying behaviour, move your joystick to its limits. Anyway, you
 should keep a hand on your device, in order to avoid it to break down if
 something goes wrong.
 
@@ -121,7 +121,7 @@ uploaded, but not played.
 The content of effect may be modified. In particular, its field "id" is set
 to the unique id assigned by the driver. This data is required for performing
 some operations (removing an effect, controlling the playback).
-This if field must be set to -1 by the user in order to tell the driver to
+The "id" field must be set to -1 by the user in order to tell the driver to
 allocate a new effect.
 
 Effects are file descriptor specific.
@@ -178,7 +178,7 @@ Control of playing is done with write(). Below is an example:
 	stop.code = effect.id;
 	stop.value = 0;
 
-	write(fd, (const void*) &play, sizeof(stop));
+	write(fd, (const void*) &stop, sizeof(stop));
 
 Setting the gain
 ----------------
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 0193dd4f0452..94049fdc583c 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -135,10 +135,7 @@ static void __evdev_flush_queue(struct evdev_client *client, unsigned int type)
 			continue;
 		} else if (head != i) {
 			/* move entry to fill the gap */
-			client->buffer[head].time = ev->time;
-			client->buffer[head].type = ev->type;
-			client->buffer[head].code = ev->code;
-			client->buffer[head].value = ev->value;
+			client->buffer[head] = *ev;
 		}
 
 		num++;
@@ -157,6 +154,7 @@ static void __evdev_queue_syn_dropped(struct evdev_client *client)
 {
 	struct input_event ev;
 	ktime_t time;
+	struct timespec64 ts;
 
 	time = client->clk_type == EV_CLK_REAL ?
 			ktime_get_real() :
@@ -164,7 +162,9 @@ static void __evdev_queue_syn_dropped(struct evdev_client *client)
 				ktime_get() :
 				ktime_get_boottime();
 
-	ev.time = ktime_to_timeval(time);
+	ts = ktime_to_timespec64(time);
+	ev.input_event_sec = ts.tv_sec;
+	ev.input_event_usec = ts.tv_nsec / NSEC_PER_USEC;
 	ev.type = EV_SYN;
 	ev.code = SYN_DROPPED;
 	ev.value = 0;
@@ -241,7 +241,10 @@ static void __pass_event(struct evdev_client *client,
 		 */
 		client->tail = (client->head - 2) & (client->bufsize - 1);
 
-		client->buffer[client->tail].time = event->time;
+		client->buffer[client->tail].input_event_sec =
+						event->input_event_sec;
+		client->buffer[client->tail].input_event_usec =
+						event->input_event_usec;
 		client->buffer[client->tail].type = EV_SYN;
 		client->buffer[client->tail].code = SYN_DROPPED;
 		client->buffer[client->tail].value = 0;
@@ -262,12 +265,15 @@ static void evdev_pass_values(struct evdev_client *client,
 	struct evdev *evdev = client->evdev;
 	const struct input_value *v;
 	struct input_event event;
+	struct timespec64 ts;
 	bool wakeup = false;
 
 	if (client->revoked)
 		return;
 
-	event.time = ktime_to_timeval(ev_time[client->clk_type]);
+	ts = ktime_to_timespec64(ev_time[client->clk_type]);
+	event.input_event_sec = ts.tv_sec;
+	event.input_event_usec = ts.tv_nsec / NSEC_PER_USEC;
 
 	/* Interrupts are disabled, just acquire the lock. */
 	spin_lock(&client->buffer_lock);
diff --git a/drivers/input/input-compat.c b/drivers/input/input-compat.c
index 2186f71c9fe5..fda8d6d2a268 100644
--- a/drivers/input/input-compat.c
+++ b/drivers/input/input-compat.c
@@ -24,8 +24,8 @@ int input_event_from_user(const char __user *buffer,
 				   sizeof(struct input_event_compat)))
 			return -EFAULT;
 
-		event->time.tv_sec = compat_event.time.tv_sec;
-		event->time.tv_usec = compat_event.time.tv_usec;
+		event->input_event_sec = compat_event.sec;
+		event->input_event_usec = compat_event.usec;
 		event->type = compat_event.type;
 		event->code = compat_event.code;
 		event->value = compat_event.value;
@@ -44,8 +44,8 @@ int input_event_to_user(char __user *buffer,
 	if (in_compat_syscall() && !COMPAT_USE_64BIT_TIME) {
 		struct input_event_compat compat_event;
 
-		compat_event.time.tv_sec = event->time.tv_sec;
-		compat_event.time.tv_usec = event->time.tv_usec;
+		compat_event.sec = event->input_event_sec;
+		compat_event.usec = event->input_event_usec;
 		compat_event.type = event->type;
 		compat_event.code = event->code;
 		compat_event.value = event->value;
diff --git a/drivers/input/input-compat.h b/drivers/input/input-compat.h
index 1563160a7af3..08cd755e73fd 100644
--- a/drivers/input/input-compat.h
+++ b/drivers/input/input-compat.h
@@ -18,7 +18,8 @@
 #ifdef CONFIG_COMPAT
 
 struct input_event_compat {
-	struct compat_timeval time;
+	compat_ulong_t sec;
+	compat_ulong_t usec;
 	__u16 type;
 	__u16 code;
 	__s32 value;
diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c
index 3664f81655ca..78df5a74822e 100644
--- a/drivers/input/input-polldev.c
+++ b/drivers/input/input-polldev.c
@@ -20,7 +20,6 @@
 MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
 MODULE_DESCRIPTION("Generic implementation of a polled input device");
 MODULE_LICENSE("GPL v2");
-MODULE_VERSION("0.1");
 
 static void input_polldev_queue_work(struct input_polled_dev *dev)
 {
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index d88d3e0f59fb..9d2688f3f961 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -84,9 +84,6 @@
 #include <linux/usb/input.h>
 #include <linux/usb/quirks.h>
 
-#define DRIVER_AUTHOR "Marko Friedemann <mfr@bmx-chemnitz.de>"
-#define DRIVER_DESC "X-Box pad driver"
-
 #define XPAD_PKT_LEN 64
 
 /* xbox d-pads should map to buttons, as is required for DDR pads
@@ -1943,6 +1940,6 @@ static struct usb_driver xpad_driver = {
 
 module_usb_driver(xpad_driver);
 
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Marko Friedemann <mfr@bmx-chemnitz.de>");
+MODULE_DESCRIPTION("X-Box pad driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c
index 97c5424f49b9..98b24ed18752 100644
--- a/drivers/input/keyboard/pmic8xxx-keypad.c
+++ b/drivers/input/keyboard/pmic8xxx-keypad.c
@@ -697,6 +697,5 @@ module_platform_driver(pmic8xxx_kp_driver);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("PMIC8XXX keypad driver");
-MODULE_VERSION("1.0");
 MODULE_ALIAS("platform:pmic8xxx_keypad");
 MODULE_AUTHOR("Trilok Soni <tsoni@codeaurora.org>");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 9f082a388388..62a1312a7387 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -268,20 +268,6 @@ config INPUT_GPIO_BEEPER
 	  To compile this driver as a module, choose M here: the
 	  module will be called gpio-beeper.
 
-config INPUT_GPIO_TILT_POLLED
-	tristate "Polled GPIO tilt switch"
-	depends on GPIOLIB || COMPILE_TEST
-	select INPUT_POLLDEV
-	help
-	  This driver implements support for tilt switches connected
-	  to GPIO pins that are not capable of generating interrupts.
-
-	  The list of gpios to use and the mapping of their states
-	  to specific angles is done via platform data.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called gpio_tilt_polled.
-
 config INPUT_GPIO_DECODER
 	tristate "Polled GPIO Decoder Input driver"
 	depends on GPIOLIB || COMPILE_TEST
@@ -468,7 +454,7 @@ config INPUT_TPS65218_PWRBUTTON
 	tristate "TPS65218 Power button driver"
 	depends on (MFD_TPS65217 || MFD_TPS65218)
 	help
-	  Say Y here if you want to enable power buttong reporting for
+	  Say Y here if you want to enable power button reporting for
 	  TPS65217 and TPS65218 Power Management IC devices.
 
 	  To compile this driver as a module, choose M here. The module will
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 4b6118d313fe..a8f61af865aa 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -36,7 +36,6 @@ obj-$(CONFIG_INPUT_DRV2665_HAPTICS)	+= drv2665.o
 obj-$(CONFIG_INPUT_DRV2667_HAPTICS)	+= drv2667.o
 obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
 obj-$(CONFIG_INPUT_GPIO_BEEPER)		+= gpio-beeper.o
-obj-$(CONFIG_INPUT_GPIO_TILT_POLLED)	+= gpio_tilt_polled.o
 obj-$(CONFIG_INPUT_GPIO_DECODER)	+= gpio_decoder.o
 obj-$(CONFIG_INPUT_HISI_POWERKEY)	+= hisi_powerkey.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
diff --git a/drivers/input/misc/apanel.c b