Merge tag 'regulator-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "Quite a lot of work going on the core this release, mainly around
  system initialization, but a quiet release for drivers:

   - fixes for registration of multiple regulators on a PMIC from Javier
     Martinez Canillas and Jon Hunter.

   - cleanups to the regulator_get() code from Dmitry Torokhov

   - lots of constifcation of structs from Bhumika Goyal

   - support for Motorola CPCAP regulators from Tony Lindgren"

* tag 'regulator-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
  regulator: core: Resolve supplies before disabling unused regulators
  regulator: Fix regulator_summary for deviceless consumers
  regulator: tps65086: Fix DT node referencing in of_parse_cb
  regulator: tps65086: Fix expected switch DT node names
  regulator: core: simplify _regulator_get()
  regulator: core: have regulator_dev_lookup() return ERR_PTR-encoded errors
  regulator: gpio: correct default type
  regulator: cpcap: Add basic regulator support
  regulator: core: fix typo in regulator_bulk_disable()
  regulator: core: optimize devm_regulator_bulk_get()
  regulator: core: simplify regulator_bulk_force_disable()
  regulator: core: have _regulator_get() accept get_type argument
  regulator: core: remove dead code in _regulator_get()
  regulator: rn5t618: constify regulator_ops structure
  regulator: rc5t583-regulator: constify regulator_ops structure
  regulator: pv88090-regulator: constify regulator_ops structure
  regulator: pv88080-regulator: constify regulator_ops structure
  regulator: pv88060-regulator: constify regulator_ops structure
  regulator: pfuze100-regulator: constify regulator_ops structure
  regulator: pcf50633-regulator: constify regulator_ops structure
  ...

48 files changed, 910 insertions, 204 deletions

diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
index 37c4ea076f88..1d58c8cfdbc0 100644
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
@@ -14,6 +14,7 @@ Optional properties:
 - anatop-delay-bit-shift: Bit shift for the step time register
 - anatop-delay-bit-width: Number of bits used in the step time register
 - vin-supply: The supply for this regulator
+- anatop-enable-bit: Regulator enable bit offset
 
 Any property defined as part of the core regulator
 binding, defined in regulator.txt, can also be used.
diff --git a/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
new file mode 100644
index 000000000000..675f4437ce92
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
@@ -0,0 +1,34 @@
+Motorola CPCAP PMIC voltage regulators
+------------------------------------
+
+Requires node properties:
+- "compatible" value one of:
+    "motorola,cpcap-regulator"
+    "motorola,mapphone-cpcap-regulator"
+
+Required regulator properties:
+- "regulator-name"
+- "regulator-enable-ramp-delay"
+- "regulator-min-microvolt"
+- "regulator-max-microvolt"
+
+Optional regulator properties:
+- "regulator-boot-on"
+
+See Documentation/devicetree/bindings/regulator/regulator.txt
+for more details about the regulator properties.
+
+Example:
+
+cpcap_regulator: regulator {
+	compatible = "motorola,cpcap-regulator";
+
+	cpcap_regulators: regulators {
+		sw5: SW5 {
+			regulator-min-microvolt = <5050000>;
+			regulator-max-microvolt = <5050000>;
+			regulator-enable-ramp-delay = <50000>;
+			regulator-boot-on;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
index e5cac1e0ca8a..dd1ed789728e 100644
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
@@ -13,7 +13,7 @@ Optional properties:
 - startup-delay-us	: Startup time in microseconds.
 - enable-active-high	: Polarity of GPIO is active high (default is low).
 - regulator-type	: Specifies what is being regulated, must be either
-			  "voltage" or "current", defaults to current.
+			  "voltage" or "current", defaults to voltage.
 
 Any property defined as part of the core regulator binding defined in
 regulator.txt can also be used.
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
index 1f8d6f84b657..4e3dfb5b5f16 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
@@ -22,6 +22,7 @@ Regulator nodes are identified by their compatible:
 		    "qcom,rpm-pm8841-regulators"
 		    "qcom,rpm-pm8916-regulators"
 		    "qcom,rpm-pm8941-regulators"
+		    "qcom,rpm-pm8994-regulators"
 		    "qcom,rpm-pma8084-regulators"
 
 - vdd_s1-supply:
@@ -80,6 +81,56 @@ Regulator nodes are identified by their compatible:
 - vdd_s10-supply:
 - vdd_s11-supply:
 - vdd_s12-supply:
+- vdd_l1-supply:
+- vdd_l2_l26_l28-supply:
+- vdd_l3_l11-supply:
+- vdd_l4_l27_l31-supply:
+- vdd_l5_l7-supply:
+- vdd_l6_l12_l32-supply:
+- vdd_l5_l7-supply:
+- vdd_l8_l16_l30-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l3_l11-supply:
+- vdd_l6_l12_l32-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l14_l15-supply:
+- vdd_l14_l15-supply:
+- vdd_l8_l16_l30-supply:
+- vdd_l17_l29-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l20_l21-supply:
+- vdd_l20_l21-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l25-supply:
+- vdd_l2_l26_l28-supply:
+- vdd_l4_l27_l31-supply:
+- vdd_l2_l26_l28-supply:
+- vdd_l17_l29-supply:
+- vdd_l8_l16_l30-supply:
+- vdd_l4_l27_l31-supply:
+- vdd_l6_l12_l32-supply:
+- vdd_lvs1_2-supply:
+	Usage: optional (pm8994 only)
+	Value type: <phandle>
+	Definition: reference to regulator supplying the input pin, as
+		    described in the data sheet
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_s6-supply:
+- vdd_s7-supply:
+- vdd_s8-supply:
+- vdd_s9-supply:
+- vdd_s10-supply:
+- vdd_s11-supply:
+- vdd_s12-supply:
 - vdd_l1_l11-supply:
 - vdd_l2_l3_l4_l27-supply:
 - vdd_l5_l7-supply:
@@ -113,6 +164,11 @@ pm8941:
 	l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
 	lvs3, 5vs1, 5vs2
 
+pm8994:
+	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
+	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
+	l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
+
 pma8084:
 	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
 	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
diff --git a/drivers/regulator/88pm800.c b/drivers/regulator/88pm800.c
index a62a89674fb5..89bbd6e8bad1 100644
--- a/drivers/regulator/88pm800.c
+++ b/drivers/regulator/88pm800.c
@@ -180,7 +180,7 @@ static int pm800_get_current_limit(struct regulator_dev *rdev)
 	return info->max_ua;
 }
 
-static struct regulator_ops pm800_volt_range_ops = {
+static const struct regulator_ops pm800_volt_range_ops = {
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
@@ -191,7 +191,7 @@ static struct regulator_ops pm800_volt_range_ops = {
 	.get_current_limit	= pm800_get_current_limit,
 };
 
-static struct regulator_ops pm800_volt_table_ops = {
+static const struct regulator_ops pm800_volt_table_ops = {
 	.list_voltage		= regulator_list_voltage_table,
 	.map_voltage		= regulator_map_voltage_iterate,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index b100a63ff3b3..fd86446e499b 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -220,7 +220,7 @@ static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index)
 	return ret;
 }
 
-static struct regulator_ops pm8607_regulator_ops = {
+static const struct regulator_ops pm8607_regulator_ops = {
 	.list_voltage	= pm8607_list_voltage,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -229,7 +229,7 @@ static struct regulator_ops pm8607_regulator_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 };
 
-static struct regulator_ops pm8606_preg_ops = {
+static const struct regulator_ops pm8606_preg_ops = {
 	.enable		= regulator_enable_regmap,
 	.disable	= regulator_disable_regmap,
 	.is_enabled	= regulator_is_enabled_regmap,
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 936f7ccc9736..be06eb29c681 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -163,6 +163,13 @@ config REGULATOR_BCM590XX
 	  BCM590xx PMUs. This will enable support for the software
 	  controllable LDO/Switching regulators.
 
+config REGULATOR_CPCAP
+	tristate "Motorola CPCAP regulator"
+	depends on MFD_CPCAP
+	help
+	  Say y here for CPCAP regulator found on some Motorola phones
+	  and tablets such as Droid 4.
+
 config REGULATOR_DA903X
 	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
 	depends on PMIC_DA903X
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 14294692beb9..ef7725e2592a 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 
 obj-$(CONFIG_REGULATOR_88PM800) += 88pm800.o
 obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
+obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o
 obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
 obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500-ext.o ab8500.o
diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c
index 9dfabda8f478..afc5b5900181 100644
--- a/drivers/regulator/aat2870-regulator.c
+++ b/drivers/regulator/aat2870-regulator.c
@@ -97,7 +97,7 @@ static int aat2870_ldo_is_enabled(struct regulator_dev *rdev)
 	return val & ri->enable_mask ? 1 : 0;
 }
 
-static struct regulator_ops aat2870_ldo_ops = {
+static const struct regulator_ops aat2870_ldo_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.map_voltage = regulator_map_voltage_ascend,
 	.set_voltage_sel = aat2870_ldo_set_voltage_sel,
diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c
index 441864b9fece..43fda8b4455a 100644
--- a/drivers/regulator/act8945a-regulator.c
+++ b/drivers/regulator/act8945a-regulator.c
@@ -69,7 +69,7 @@ static const struct regulator_linear_range act8945a_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
 };
 
-static struct regulator_ops act8945a_ops = {
+static const struct regulator_ops act8945a_ops = {
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
diff --git a/drivers/regulator/ad5398.c b/drivers/regulator/ad5398.c
index 8b0f788a9bbb..11c1f880b7bb 100644
--- a/drivers/regulator/ad5398.c
+++ b/drivers/regulator/ad5398.c
@@ -181,7 +181,7 @@ static int ad5398_disable(struct regulator_dev *rdev)
 	return ret;
 }
 
-static struct regulator_ops ad5398_ops = {
+static const struct regulator_ops ad5398_ops = {
 	.get_current_limit = ad5398_get_current_limit,
 	.set_current_limit = ad5398_set_current_limit,
 	.enable = ad5398_enable,
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 3a6d0290c54c..b041f277a38b 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -301,7 +301,19 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 			return -EINVAL;
 		}
 	} else {
+		u32 enable_bit;
+
 		rdesc->ops = &anatop_rops;
+
+		if (!of_property_read_u32(np, "anatop-enable-bit",
+					  &enable_bit)) {
+			anatop_rops.enable  = regulator_enable_regmap;
+			anatop_rops.disable = regulator_disable_regmap;
+			anatop_rops.is_enabled = regulator_is_enabled_regmap;
+
+			rdesc->enable_reg = sreg->control_reg;
+			rdesc->enable_mask = BIT(enable_bit);
+		}
 	}
 
 	/* register regulator */
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index 302b57cb89c6..e76d094591e7 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -109,7 +109,7 @@ static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
 	return (val & ARIZONA_LDO1_VSEL_MASK) >> ARIZONA_LDO1_VSEL_SHIFT;
 }
 
-static struct regulator_ops arizona_ldo1_hc_ops = {
+static const struct regulator_ops arizona_ldo1_hc_ops = {
 	.list_voltage = arizona_ldo1_hc_list_voltage,
 	.map_voltage = arizona_ldo1_hc_map_voltage,
 	.get_voltage_sel = arizona_ldo1_hc_get_voltage_sel,
@@ -135,7 +135,7 @@ static const struct regulator_desc arizona_ldo1_hc = {
 	.owner = THIS_MODULE,
 };
 
-static struct regulator_ops arizona_ldo1_ops = {
+static const struct regulator_ops arizona_ldo1_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.map_voltage = regulator_map_voltage_linear,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
index fcb98dbda837..22bd71407622 100644
--- a/drivers/regulator/arizona-micsupp.c
+++ b/drivers/regulator/arizona-micsupp.c
@@ -45,6 +45,7 @@ static void arizona_micsupp_check_cp(struct work_struct *work)
 	struct arizona_micsupp *micsupp =
 		container_of(work, struct arizona_micsupp, check_cp_work);
 	struct snd_soc_dapm_context *dapm = micsupp->arizona->dapm;
+	struct snd_soc_component *component = snd_soc_dapm_to_component(dapm);
 	struct arizona *arizona = micsupp->arizona;
 	struct regmap *regmap = arizona->regmap;
 	unsigned int reg;
@@ -59,9 +60,10 @@ static void arizona_micsupp_check_cp(struct work_struct *work)
 	if (dapm) {
 		if ((reg & (ARIZONA_CPMIC_ENA | ARIZONA_CPMIC_BYPASS)) ==
 		    ARIZONA_CPMIC_ENA)
-			snd_soc_dapm_force_enable_pin(dapm, "MICSUPP");
+			snd_soc_component_force_enable_pin(component,
+							   "MICSUPP");
 		else
-			snd_soc_dapm_disable_pin(dapm, "MICSUPP");
+			snd_soc_component_disable_pin(component, "MICSUPP");
 
 		snd_soc_dapm_sync(dapm);
 	}
@@ -104,7 +106,7 @@ static int arizona_micsupp_set_bypass(struct regulator_dev *rdev, bool ena)
 	return ret;
 }
 
-static struct regulator_ops arizona_micsupp_ops = {
+static const struct regulator_ops arizona_micsupp_ops = {
 	.enable = arizona_micsupp_enable,
 	.disable = arizona_micsupp_disable,
 	.is_enabled = regulator_is_enabled_regmap,
diff --git a/drivers/regulator/as3711-regulator.c b/drivers/regulator/as3711-regulator.c
index c0e93b1332f7..874d415d6b4f 100644
--- a/drivers/regulator/as3711-regulator.c
+++ b/drivers/regulator/as3711-regulator.c
@@ -82,7 +82,7 @@ static unsigned int as3711_get_mode_sd(struct regulator_dev *rdev)
 	return -EINVAL;
 }
 
-static struct regulator_ops as3711_sd_ops = {
+static const struct regulator_ops as3711_sd_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -94,7 +94,7 @@ static struct regulator_ops as3711_sd_ops = {
 	.set_mode		= as3711_set_mode_sd,
 };
 
-static struct regulator_ops as3711_aldo_ops = {
+static const struct regulator_ops as3711_aldo_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -104,7 +104,7 @@ static struct regulator_ops as3711_aldo_ops = {
 	.map_voltage		= regulator_map_voltage_linear_range,
 };
 
-static struct regulator_ops as3711_dldo_ops = {
+static const struct regulator_ops as3711_dldo_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index a3ade9e4ef47..0b9d4e3e52c7 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -128,11 +128,11 @@
 		.ops		= &axp20x_ops_range,				\
 	}
 
-static struct regulator_ops axp20x_ops_fixed = {
+static const struct regulator_ops axp20x_ops_fixed = {
 	.list_voltage		= regulator_list_voltage_linear,
 };
 
-static struct regulator_ops axp20x_ops_range = {
+static const struct regulator_ops axp20x_ops_range = {
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.list_voltage		= regulator_list_voltage_linear_range,
@@ -141,7 +141,7 @@ static struct regulator_ops axp20x_ops_range = {
 	.is_enabled		= regulator_is_enabled_regmap,
 };
 
-static struct regulator_ops axp20x_ops = {
+static const struct regulator_ops axp20x_ops = {
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.list_voltage		= regulator_list_voltage_linear,
@@ -150,7 +150,7 @@ static struct regulator_ops axp20x_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 };
 
-static struct regulator_ops axp20x_ops_sw = {
+static const struct regulator_ops axp20x_ops_sw = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
diff --git a/drivers/regulator/bcm590xx-regulator.c b/drivers/regulator/bcm590xx-regulator.c
index 76b01835dcb4..9dd715407b39 100644
--- a/drivers/regulator/bcm590xx-regulator.c
+++ b/drivers/regulator/bcm590xx-regulator.c
@@ -250,7 +250,7 @@ static int bcm590xx_get_enable_register(int id)
 	return reg;
 }
 
-static struct regulator_ops bcm590xx_ops_ldo = {
+static const struct regulator_ops bcm590xx_ops_ldo = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -260,7 +260,7 @@ static struct regulator_ops bcm590xx_ops_ldo = {
 	.map_voltage		= regulator_map_voltage_iterate,
 };
 
-static struct regulator_ops bcm590xx_ops_dcdc = {
+static const struct regulator_ops bcm590xx_ops_dcdc = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -270,7 +270,7 @@ static struct regulator_ops bcm590xx_ops_dcdc = {
 	.map_voltage		= regulator_map_voltage_linear_range,
 };
 
-static struct regulator_ops bcm590xx_ops_vbus = {
+static const struct regulator_ops bcm590xx_ops_vbus = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 04baac9a165b..53d4fc70dbd0 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1455,12 +1455,14 @@ static struct regulator_dev *regulator_lookup_by_name(const char *name)
  * lookup could succeed in the future.
  *
  * If successful, returns a struct regulator_dev that corresponds to the name
- * @supply and with the embedded struct device refcount incremented by one,
- * or NULL on failure. The refcount must be dropped by calling put_device().
+ * @supply and with the embedded struct device refcount incremented by one.
+ * The refcount must be dropped by calling put_device().
+ * On failure one of the following ERR-PTR-encoded values is returned:
+ * -ENODEV if lookup fails permanently, -EPROBE_DEFER if lookup could succeed
+ * in the future.
  */
 static struct regulator_dev *regulator_dev_lookup(struct device *dev,
-						  const char *supply,
-						  int *ret)
+						  const char *supply)
 {
 	struct regulator_dev *r;
 	struct device_node *node;
@@ -1476,16 +1478,12 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev,
 			r = of_find_regulator_by_node(node);
 			if (r)
 				return r;
-			*ret = -EPROBE_DEFER;
-			return NULL;
-		} else {
+
 			/*
-			 * If we couldn't even get the node then it's
-			 * not just that the device didn't register
-			 * yet, there's no node and we'll never
-			 * succeed.
+			 * We have a node, but there is no device.
+			 * assume it has not registered yet.
 			 */
-			*ret = -ENODEV;
+			return ERR_PTR(-EPROBE_DEFER);
 		}
 	}
 
@@ -1506,13 +1504,16 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev,
 
 		if (strcmp(map->supply, supply) == 0 &&
 		    get_device(&map->regulator->dev)) {
-			mutex_unlock(&regulator_list_mutex);
-			return map->regulator;
+			r = map->regulator;
+			break;
 		}
 	}
 	mutex_unlock(&regulator_list_mutex);
 
-	return NULL;
+	if (r)
+		return r;
+
+	return ERR_PTR(-ENODEV);
 }
 
 static int regulator_resolve_supply(struct regulator_dev *rdev)
@@ -1529,8 +1530,10 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 	if (rdev->supply)
 		return 0;
 
-	r = regulator_dev_lookup(dev, rdev->supply_name, &ret);
-	if (!r) {
+	r = regulator_dev_lookup(dev, rdev->supply_name);
+	if (IS_ERR(r)) {
+		ret = PTR_ERR(r);
+
 		if (ret == -ENODEV) {
 			/*
 			 * No supply was specified for this regulator and
@@ -1553,6 +1556,19 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 		}
 	}
 
+	/*
+	 * If the supply's parent device is not the same as the
+	 * regulator's parent device, then ensure the parent device
+	 * is bound before we resolve the supply, in case the parent
+	 * device get probe deferred and unregisters the supply.
+	 */
+	if (r->dev.parent && r->dev.parent != rdev->dev.parent) {
+		if (!device_is_bound(r->dev.parent)) {
+			put_device(&r->dev);
+			return -EPROBE_DEFER;
+		}
+	}
+
 	/* Recursively resolve the supply of the supply */
 	ret = regulator_resolve_supply(r);
 	if (ret < 0) {
@@ -1580,69 +1596,72 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 }
 
 /* Internal regulator request function */
-static struct regulator *_regulator_get(struct device *dev, const char *id,