Merge tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.13-rc1.

  Overall, a pretty slow development cycle, the majority of the work
  going into the debugfs interface for the thunderbolt (i.e. USB4) code,
  to help with debugging the myrad ways that hardware vendors get their
  interfaces messed up. Other than that, here's the highlights:

   - thunderbolt changes and additions to debugfs interfaces

   - lots of device tree updates for new and old hardware

   - UVC configfs gadget updates and new apis for features

   - xhci driver updates and fixes

   - dwc3 driver updates and fixes

   - typec driver updates and fixes

   - lots of other small updates and fixes, full details in the shortlog

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits)
  usb: typec: tcpm: Add support for sink-bc12-completion-time-ms DT property
  dt-bindings: usb: maxim,max33359: add usage of sink bc12 time property
  dt-bindings: connector: Add time property for Sink BC12 detection completion
  usb: dwc3: gadget: Remove dwc3_request->needs_extra_trb
  usb: dwc3: gadget: Cleanup SG handling
  usb: dwc3: gadget: Fix looping of queued SG entries
  usb: dwc3: gadget: Fix checking for number of TRBs left
  usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED
  Revert "usb: gadget: composite: fix OS descriptors w_value logic"
  usb: ehci-spear: fix call balance of sehci clk handling routines
  USB: make to_usb_device_driver() use container_of_const()
  USB: make to_usb_driver() use container_of_const()
  USB: properly lock dynamic id list when showing an id
  USB: make single lock for all usb dynamic id lists
  drivers/usb/storage: refactor min with min_t
  drivers/usb/serial: refactor min with min_t
  drivers/usb/musb: refactor min/max with min_t/max_t
  drivers/usb/mon: refactor min with min_t
  drivers/usb/misc: refactor min with min_t
  drivers/usb/host: refactor min/max with min_t/max_t
  ...

1 files changed, 45 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index fb216ce68bb3..67700440e23b 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -253,6 +253,46 @@ properties:
 
     additionalProperties: false
 
+  sink-wait-cap-time-ms:
+    description: Represents the max time in ms that USB Type-C port (in sink
+      role) should wait for the port partner (source role) to send source caps.
+      SinkWaitCap timer starts when port in sink role attaches to the source.
+      This timer will stop when sink receives PD source cap advertisement before
+      timeout in which case it'll move to capability negotiation stage. A
+      timeout leads to a hard reset message by the port.
+    minimum: 310
+    maximum: 620
+    default: 310
+
+  ps-source-off-time-ms:
+    description: Represents the max time in ms that a DRP in source role should
+      take to turn off power after the PsSourceOff timer starts. PsSourceOff
+      timer starts when a sink's PHY layer receives EOP of the GoodCRC message
+      (corresponding to an Accept message sent in response to a PR_Swap or a
+      FR_Swap request). This timer stops when last bit of GoodCRC EOP
+      corresponding to the received PS_RDY message is transmitted by the PHY
+      layer. A timeout shall lead to error recovery in the type-c port.
+    minimum: 750
+    maximum: 920
+    default: 920
+
+  cc-debounce-time-ms:
+    description: Represents the max time in ms that a port shall wait to
+      determine if it's attached to a partner.
+    minimum: 100
+    maximum: 200
+    default: 200
+
+  sink-bc12-completion-time-ms:
+    description: Represents the max time in ms that a port in sink role takes
+      to complete Battery Charger (BC1.2) Detection. BC1.2 detection is a
+      hardware mechanism, which in some TCPC implementations, can run in
+      parallel once the Type-C connection state machine reaches the "potential
+      connect as sink" state. In TCPCs where this causes delays to respond to
+      the incoming PD messages, sink-bc12-completion-time-ms is used to delay
+      PD negotiation till BC1.2 detection completes.
+    default: 0
+
 dependencies:
   sink-vdos-v1: [ sink-vdos ]
   sink-vdos: [ sink-vdos-v1 ]
@@ -380,7 +420,7 @@ examples:
     };
 
   # USB-C connector attached to a typec port controller(ptn5110), which has
-  # power delivery support and enables drp.
+  # power delivery support, explicitly defines time properties and enables drp.
   - |
     #include <dt-bindings/usb/pd.h>
     typec: ptn5110 {
@@ -393,6 +433,10 @@ examples:
             sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
                          PDO_VAR(5000, 12000, 2000)>;
             op-sink-microwatt = <10000000>;
+            sink-wait-cap-time-ms = <465>;
+            ps-source-off-time-ms = <835>;
+            cc-debounce-time-ms = <101>;
+            sink-bc12-completion-time-ms = <500>;
         };
     };