Merge tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver subsystem updates from Greg KH:
 "Here is the big set of char/misc and a number of other driver
  subsystem updates for 6.9-rc1. Included in here are:

   - IIO driver updates, loads of new ones and evolution of existing ones

   - coresight driver updates

   - const cleanups for many driver subsystems

   - speakup driver additions

   - platform remove callback void cleanups

   - mei driver updates

   - mhi driver updates

   - cdx driver updates for MSI interrupt handling

   - nvmem driver updates

   - other smaller driver updates and cleanups, full details in the
    shortlog

  All of these have been in linux-next for a long time with no reported
  issue, other than a build warning for the speakup driver"

The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.

Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/

* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
  binder: remove redundant variable page_addr
  uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
  uio_pruss: UIO_MEM_DMA_COHERENT conversion
  cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
  uio: introduce UIO_MEM_DMA_COHERENT type
  cdx: add MSI support for CDX bus
  pps: use cflags-y instead of EXTRA_CFLAGS
  speakup: Add /dev/synthu device
  speakup: Fix 8bit characters from direct synth
  parport: sunbpp: Convert to platform remove callback returning void
  parport: amiga: Convert to platform remove callback returning void
  char: xillybus: Convert to platform remove callback returning void
  vmw_balloon: change maintainership
  MAINTAINERS: change the maintainer for hpilo driver
  char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
  hpet: remove hpets::hp_clocksource
  platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
  char: xilinx_hwicap: drop casting to void in dev_set_drvdata
  greybus: move is_gb_* functions out of greybus.h
  greybus: Remove usage of the deprecated ida_simple_xx() API
  ...

30 files changed, 767 insertions, 99 deletions

diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
index 61ddc3b5b247..8eec07d9d454 100644
--- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -44,14 +44,21 @@ properties:
     minItems: 1
     maxItems: 2
 
-  qcom,dsb-element-size:
+  qcom,dsb-element-bits:
     description:
       Specifies the DSB(Discrete Single Bit) element size supported by
       the monitor. The associated aggregator will read this size before it
       is enabled. DSB element size currently only supports 32-bit and 64-bit.
-    $ref: /schemas/types.yaml#/definitions/uint8
     enum: [32, 64]
 
+  qcom,cmb-element-bits:
+    description:
+      Specifies the CMB(Continuous Multi-Bit) element size supported by
+      the monitor. The associated aggregator will read this size before it
+      is enabled. CMB element size currently only supports 8-bit, 32-bit
+      and 64-bit.
+    enum: [8, 32, 64]
+
   qcom,dsb-msrs-num:
     description:
       Specifies the number of DSB(Discrete Single Bit) MSR(mux select register)
@@ -61,6 +68,15 @@ properties:
     minimum: 0
     maximum: 32
 
+  qcom,cmb-msrs-num:
+    description:
+      Specifies the number of CMB MSR(mux select register) registers supported
+      by the monitor. If this property is not configured or set to 0, it means
+      this TPDM doesn't support CMB MSR.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 32
+
   clocks:
     maxItems: 1
 
@@ -94,7 +110,7 @@ examples:
       compatible = "qcom,coresight-tpdm", "arm,primecell";
       reg = <0x0684c000 0x1000>;
 
-      qcom,dsb-element-size = /bits/ 8 <32>;
+      qcom,dsb-element-bits = <32>;
       qcom,dsb-msrs-num = <16>;
 
       clocks = <&aoss_qmp>;
@@ -110,4 +126,22 @@ examples:
       };
     };
 
+    tpdm@6c29000 {
+      compatible = "qcom,coresight-tpdm", "arm,primecell";
+      reg = <0x06c29000 0x1000>;
+
+      qcom,cmb-element-bits = <64>;
+      qcom,cmb-msrs-num = <32>;
+
+      clocks = <&aoss_qmp>;
+      clock-names = "apb_pclk";
+
+      out-ports {
+        port {
+          tpdm_ipcc_out_funnel_center: endpoint {
+            remote-endpoint = <&funnel_center_in_tpdm_ipcc>;
+          };
+        };
+      };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adc.yaml b/Documentation/devicetree/bindings/iio/adc/adc.yaml
index 261601729745..36775f8f71df 100644
--- a/Documentation/devicetree/bindings/iio/adc/adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adc.yaml
@@ -22,7 +22,6 @@ properties:
     maxItems: 1
 
   label:
-    $ref: /schemas/types.yaml#/definitions/string
     description: Unique name to identify which channel this is.
 
   bipolar:
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
index 7aa748d6b7a0..eecd5fbab695 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
@@ -44,6 +44,9 @@ properties:
       Pin that controls the powerdown mode of the device.
     maxItems: 1
 
+  io-backends:
+    maxItems: 1
+
   reset-gpios:
     description:
       Reset pin for the device.
@@ -68,6 +71,7 @@ examples:
             reg = <0>;
             clocks = <&adc_clk>;
             clock-names = "adc-clk";
+            io-backends = <&iio_backend>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
index 9996dd93f84b..3d49d21ad33d 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -39,12 +39,15 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       A reference to a the actual ADC to which this FPGA ADC interfaces to.
+    deprecated: true
+
+  '#io-backend-cells':
+    const: 0
 
 required:
   - compatible
   - dmas
   - reg
-  - adi,adc-dev
 
 additionalProperties: false
 
@@ -55,7 +58,6 @@ examples:
         reg = <0x44a00000 0x10000>;
         dmas = <&rx_dma 0>;
         dma-names = "rx";
-
-        adi,adc-dev = <&spi_adc>;
+        #io-backend-cells = <0>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml
new file mode 100644
index 000000000000..47a11a9ac95e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PAC1934 Power Monitors with Accumulator
+
+maintainers:
+  - Marius Cristea <marius.cristea@microchip.com>
+
+description: |
+  This device is part of the Microchip family of Power Monitors with
+  Accumulator.
+  The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,pac1931
+      - microchip,pac1932
+      - microchip,pac1933
+      - microchip,pac1934
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  slow-io-gpios:
+    description:
+      A GPIO used to trigger a change is sampling rate (lowering the chip power
+      consumption). If configured in SLOW mode, if this pin is forced high,
+      sampling rate is forced to eight samples/second. When it is forced low,
+      the sampling rate is 1024 samples/second unless a different sample rate
+      has been programmed.
+
+patternProperties:
+  "^channel@[1-4]+$":
+    type: object
+    $ref: adc.yaml
+    description:
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        items:
+          minimum: 1
+          maximum: 4
+
+      shunt-resistor-micro-ohms:
+        description:
+          Value in micro Ohms of the shunt resistor connected between
+          the SENSE+ and SENSE- inputs, across which the current is measured.
+          Value is needed to compute the scaling of the measured current.
+
+    required:
+      - reg
+      - shunt-resistor-micro-ohms
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-monitor@10 {
+            compatible = "microchip,pac1934";
+            reg = <0x10>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@1 {
+                reg = <0x1>;
+                shunt-resistor-micro-ohms = <24900000>;
+                label = "CPU";
+            };
+
+            channel@2 {
+                reg = <0x2>;
+                shunt-resistor-micro-ohms = <49900000>;
+                label = "GPU";
+            };
+
+            channel@3 {
+                reg = <0x3>;
+                shunt-resistor-micro-ohms = <75000000>;
+                label = "MEM";
+                bipolar;
+            };
+
+            channel@4 {
+                reg = <0x4>;
+                shunt-resistor-micro-ohms = <100000000>;
+                label = "NET";
+                bipolar;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
index dacc526dc695..dfc3f512918f 100644
--- a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
@@ -31,7 +31,6 @@ properties:
       - description: normal conversion, include EOC (End of Conversion),
           ECH (End of Chain), JEOC (End of Injected Conversion) and
           JECH (End of injected Chain).
-      - description: Self-testing Interrupts.
 
   clocks:
     maxItems: 1
@@ -70,8 +69,7 @@ examples:
             reg = <0x44530000 0x10000>;
             interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
             clocks = <&clk IMX93_CLK_ADC1_GATE>;
             clock-names = "ipg";
             vref-supply = <&reg_vref_1v8>;
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index 40fa0710f1f0..c28db0d635a0 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -75,7 +75,6 @@ patternProperties:
           in the PMIC-specific files in include/dt-bindings/iio/.
 
       label:
-        $ref: /schemas/types.yaml#/definitions/string
         description: |
             ADC input of the platform as seen in the schematics.
             For thermistor inputs connected to generic AMUX or GPIO inputs
diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
index 88e008629ea8..af2c3a67f888 100644
--- a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
@@ -25,7 +25,14 @@ description: |
 
 properties:
   compatible:
-    const: richtek,rtq6056
+    oneOf:
+      - enum:
+          - richtek,rtq6056
+          - richtek,rtq6059
+      - items:
+          - enum:
+              - richtek,rtq6053
+          - const: richtek,rtq6056
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
new file mode 100644
index 000000000000..bf5a43a81d59
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1298.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments' ads1298 medical ADC chips
+
+description: |
+  Datasheet at: https://www.ti.com/product/ADS1298
+  Bindings for this chip aren't complete.
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+properties:
+  compatible:
+    enum:
+      - ti,ads1298
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  reset-gpios:
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      Analog power supply, voltage between AVDD and AVSS. When providing a
+      symmetric +/- 2.5V, the regulator should report 5V.
+
+  vref-supply:
+    description:
+      Optional reference voltage. If omitted, internal reference is used,
+      which is 2.4V when analog supply is below 4.4V, 4V otherwise.
+
+  clocks:
+    description: Optional 2.048 MHz external source clock on CLK pin
+    maxItems: 1
+
+  interrupts:
+    description: Interrupt on DRDY pin, triggers on falling edge
+    maxItems: 1
+
+  label: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1 {
+          reg = <1>;
+          compatible = "ti,ads1298";
+          label = "ads1298-1-ecg";
+          avdd-supply = <&reg_iso_5v_a>;
+          clocks = <&clk_ads1298>;
+          interrupt-parent = <&gpio0>;
+          interrupts = <78 IRQ_TYPE_EDGE_FALLING>;
+          spi-max-frequency = <20000000>;
+          spi-cpha;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
index dddf97b50549..4151f99b42aa 100644
--- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
+++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
@@ -39,6 +39,17 @@ properties:
     description: |
       Channel node of a voltage io-channel.
 
+  '#io-channel-cells':
+    description:
+      In addition to consuming the measurement services of a voltage
+      output channel, the voltage divider can act as a provider of
+      measurement services to other devices. This is particularly
+      useful in scenarios wherein an ADC has an analog frontend,
+      such as a voltage divider, and then consuming its raw value
+      isn't interesting. In this case, the voltage before the divider
+      is desired.
+    const: 1
+
   output-ohms:
     description:
       Resistance Rout over which the output voltage is measured. See full-ohms.
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
index 67de9d4e3a1d..3a470459b965 100644
--- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -21,6 +21,8 @@ description: |
   HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz
     https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf
 
+  LTC6373 is a 3-Bit precision instrumentation amplifier with fully differential outputs
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ltc6373.pdf
 
 properties:
   compatible:
@@ -28,16 +30,55 @@ properties:
       - adi,adrf5740
       - adi,hmc425a
       - adi,hmc540s
+      - adi,ltc6373
 
   vcc-supply: true
 
   ctrl-gpios:
     description:
-      Must contain an array of 6 GPIO specifiers, referring to the GPIO pins
-      connected to the control pins V1-V6.
-    minItems: 6
+      Must contain an array of GPIO specifiers, referring to the GPIO pins
+      connected to the control pins.
+        ADRF5740  - 4 GPIO connected to D2-D5
+        HMC540S   - 4 GPIO connected to V1-V4
+        HMC425A   - 6 GPIO connected to V1-V6
+        LTC6373   - 3 GPIO connected to A0-A2
+    minItems: 1
     maxItems: 6
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,hmc425a
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 6
+          maxItems: 6
+  - if:
+      properties:
+        compatible:
+          contains:
+            anyOf:
+              - const: adi,adrf5740
+              - const: adi,hmc540s
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 4
+          maxItems: 4
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ltc6373
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 3
+          maxItems: 3
+
 required:
   - compatible
   - ctrl-gpios
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml
new file mode 100644
index 000000000000..2bcf4bbc12e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admfm2000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMFM2000 Dual Microwave Down Converter
+
+maintainers:
+  - Kim Seer Paller <kimseer.paller@analog.com>
+
+description:
+  Dual microwave down converter module with input RF and LO frequency ranges
+  from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz.
+  It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down
+  conversion path.
+
+properties:
+  compatible:
+    enum:
+      - adi,admfm2000
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a channel of the device.
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description:
+          The channel number.
+        minimum: 0
+        maximum: 1
+
+      adi,mixer-mode:
+        description:
+          Enable mixer mode for the channel. It downconverts RF between 5 GHz
+          and 32 GHz to IF between 0.5 GHz and 8 GHz. If not present, the channel
+          is in direct IF mode which bypasses the mixer and downconverts RF
+          between 2 GHz and 8 GHz to IF between 0.5 GHz and 8 GHz.
+        type: boolean
+
+      switch-gpios:
+        description: |
+          GPIOs to select the RF path for the channel. The same state of CTRL-A
+          and CTRL-B GPIOs is not permitted.
+          CTRL-A   CTRL-B    CH1 Status        CH2 Status
+          1        0         Direct IF mode    Mixer mode
+          0        1         Mixer mode        Direct IF mode
+
+        items:
+          - description: CTRL-A GPIO
+          - description: CTRL-B GPIO
+
+      attenuation-gpios:
+        description: |
+          Choice of attenuation:
+          DSA-V4  DSA-V3  DSA-V2  DSA-V1  DSA-V0
+          1       1       1       1       1        0 dB
+          1       1       1       1       0        -1 dB
+          1       1       1       0       1        -2 dB
+          1       1       0       1       1        -4 dB
+          1       0       1       1       1        -8 dB
+          0       1       1       1       1        -16 dB
+          0       0       0       0       0        -31 dB
+
+        items:
+          - description: DSA-V0 GPIO
+          - description: DSA-V1 GPIO
+          - description: DSA-V2 GPIO
+          - description: DSA-V3 GPIO
+          - description: DSA-V4 GPIO
+
+    required:
+      - reg
+      - switch-gpios
+      - attenuation-gpios
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    converter {
+      compatible = "adi,admfm2000";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      channel@0 {
+        reg = <0>;
+        switch-gpios = <&gpio 1 GPIO_ACTIVE_LOW>,
+                       <&gpio 2 GPIO_ACTIVE_HIGH>;
+
+        attenuation-gpios = <&gpio 17 GPIO_ACTIVE_LOW>,
+                            <&gpio 22 GPIO_ACTIVE_LOW>,
+                            <&gpio 23 GPIO_ACTIVE_LOW>,
+                            <&gpio 24 GPIO_ACTIVE_LOW>,
+                            <&gpio 25 GPIO_ACTIVE_LOW>;
+      };
+
+      channel@1 {
+        reg = <1>;
+        adi,mixer-mode;
+        switch-gpios = <&gpio 3 GPIO_ACTIVE_LOW>,
+                       <&gpio 4 GPIO_ACTIVE_HIGH>;
+
+        attenuation-gpios = <&gpio 0 GPIO_ACTIVE_LOW>,
+                            <&gpio 5 GPIO_ACTIVE_LOW>,
+                            <&gpio 6 GPIO_ACTIVE_LOW>,
+                            <&gpio 16 GPIO_ACTIVE_LOW>,
+                            <&gpio 26 GPIO_ACTIVE_LOW>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
index 1414ba9977c1..3c6fe74af0b8 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
@@ -22,6 +22,9 @@ properties:
   vdd-supply: true
   vddio-supply: true
 
+  spi-max-frequency:
+    maximum: 10000000
+
   interrupts:
     minItems: 1
     maxItems: 2
@@ -33,7 +36,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
index 79e75a8675cb..e3eca8917517 100644
--- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
@@ -27,6 +27,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
index 7f6d0f9edc75..8b5dedd1a598 100644
--- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
@@ -43,6 +43,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -51,5 +52,7 @@ examples:
             compatible = "ti,hdc3021", "ti,hdc3020";
             reg = <0x47>;
             vdd-supply = <&vcc_3v3>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <23 IRQ_TYPE_EDGE_RISING>;
         };
     };
diff --git a/Documentati