Merge tag 'sound-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "We've got many code additions at this cycle as a result of quite a few
  new drivers. Below are highlights:

  Core stuff:
   - Fix the long-standing issue with the device registration order; the
     control device is now registered at last
   - PCM locking code cleanups for RT kernels
   - Fixes for possible races in ALSA timer resolution accesses
   - TLV offset definitions in uapi

  ASoC:
   - Many fixes for the topology stuff, including fixes for v4 ABI
     compatibility
   - Lots of cleanups / quirks for Intel platforms based on Realtek
     CODECs
   - Continued componentization works, removing legacy CODEC stuff
   - Conversion of OMAP DMA to the new, more standard SDMA-PCM driver
   - Fixes and updates to Cirrus Logic SoC drivers
   - New Qualcomm DSP support
   - New drivers for Analog SSM2305, Atmel I2S controllers, Mediatek
     MT6351, MT6797 and MT7622, Qualcomm DSPs, Realtek RT1305, RT1306
     and RT5668 and TI TSCS454

  HD-audio:
   - Finally better support for some CA0132 boards, allowing Windows
     firmware
   - HP Spectre x360 support along with a bulk of COEF stuff
   - Blacklisting power save default some known boards reported on
     Fedora

  USB-audio:
   - Continued improvements on UAC3 support; now BADD is supported
   - Fixes / improvements for Dell WD15 dock
   - Allow DMA coherent pages for PCM buffers for ARCH, MIPS & co

  Others:
   - New Xen sound frontend driver support
   - Cache implementation and other improvements for FireWire DICE
   - Conversions to octal permissions in allover places"

* tag 'sound-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (386 commits)
  ASoC: dapm: delete dapm_kcontrol_data paths list before freeing it
  ALSA: usb-audio: remove redundant check on err
  ASoC: topology: Move skl-tplg-interface.h to uapi
  ASoC: topology: Move v4 manifest header data structures to uapi
  ASoC: topology: Improve backwards compatibility with v4 topology files
  ALSA: pci/hda: Remove unused, broken, header file
  ASoC: TSCS454: Add Support
  ASoC: Intel: kbl: Move codec sysclk config to codec_init function
  ASoC: simple-card: set cpu dai clk in hw_params
  ALSA: hda - Handle kzalloc() failure in snd_hda_attach_pcm_stream()
  ALSA: oxygen: use match_string() helper
  ASoC: dapm: use match_string() helper
  ASoC: max98095: use match_string() helper
  ASoC: max98088: use match_string() helper
  ASoC: Intel: bytcr_rt5651: Set card long_name based on quirks
  ASoC: mt6797-mt6351: add hostless phone call path
  ASoC: mt6797: add Hostless DAI
  ASoC: mt6797: add PCM interface
  ASoC: mediatek: export mtk-afe symbols as needed
  ASoC: codecs: PCM1789: include gpio/consumer.h
  ...

52 files changed, 776 insertions, 55 deletions

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
new file mode 100644
index 000000000000..bcc612cc7423
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
@@ -0,0 +1,84 @@
+Qualcomm APR (Asynchronous Packet Router) binding
+
+This binding describes the Qualcomm APR. APR is a IPC protocol for
+communication between Application processor and QDSP. APR is mainly
+used for audio/voice services on the QDSP.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,apr-v<VERSION-NUMBER>", example "qcom,apr-v2"
+
+- reg
+	Usage: required
+	Value type: <u32>
+	Definition: Destination processor ID.
+	Possible values are :
+			1 - APR simulator
+			2 - PC
+			3 - MODEM
+			4 - ADSP
+			5 - APPS
+			6 - MODEM2
+			7 - APPS2
+
+= APR SERVICES
+Each subnode of the APR node represents service tied to this apr. The name
+of the nodes are not important. The properties of these nodes are defined
+by the individual bindings for the specific service
+- All APR services MUST contain the following property:
+
+- reg
+	Usage: required
+	Value type: <u32>
+	Definition: APR Service ID
+	Possible values are :
+			3 - DSP Core Service
+			4 - Audio Front End Service.
+			5 - Voice Stream Manager Service.
+			6 - Voice processing manager.
+			7 - Audio Stream Manager Service.
+			8 - Audio Device Manager Service.
+			9 - Multimode voice manager.
+			10 - Core voice stream.
+			11 - Core voice processor.
+			12 - Ultrasound stream manager.
+			13 - Listen stream manager.
+
+= EXAMPLE
+The following example represents a QDSP based sound card on a MSM8996 device
+which uses apr as communication between Apps and QDSP.
+
+	apr@4 {
+		compatible = "qcom,apr-v2";
+		reg = <APR_DOMAIN_ADSP>;
+
+		q6core@3 {
+			compatible = "qcom,q6core";
+			reg = <APR_SVC_ADSP_CORE>;
+		};
+
+		q6afe@4 {
+			compatible = "qcom,q6afe";
+			reg = <APR_SVC_AFE>;
+
+			dais {
+				#sound-dai-cells = <1>;
+				hdmi@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		q6asm@7 {
+			compatible = "qcom,q6asm";
+			reg = <APR_SVC_ASM>;
+			...
+		};
+
+		q6adm@8 {
+			compatible = "qcom,q6adm";
+			reg = <APR_SVC_ADM>;
+			...
+		};
+	};
diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2305.txt b/Documentation/devicetree/bindings/sound/adi,ssm2305.txt
new file mode 100644
index 000000000000..a9c9d83c8a30
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,ssm2305.txt
@@ -0,0 +1,14 @@
+Analog Devices SSM2305 Speaker Amplifier
+========================================
+
+Required properties:
+  - compatible : "adi,ssm2305"
+  - shutdown-gpios : The gpio connected to the shutdown pin.
+                     The gpio signal is ACTIVE_LOW.
+
+Example:
+
+ssm2305: analog-amplifier {
+	compatible = "adi,ssm2305";
+	shutdown-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/sound/atmel-i2s.txt b/Documentation/devicetree/bindings/sound/atmel-i2s.txt
new file mode 100644
index 000000000000..735368b8a73f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel-i2s.txt
@@ -0,0 +1,47 @@
+* Atmel I2S controller
+
+Required properties:
+- compatible:     Should be "atmel,sama5d2-i2s".
+- reg:            Should be the physical base address of the controller and the
+                  length of memory mapped region.
+- interrupts:     Should contain the interrupt for the controller.
+- dmas:           Should be one per channel name listed in the dma-names property,
+                  as described in atmel-dma.txt and dma.txt files.
+- dma-names:      Two dmas have to be defined, "tx" and "rx".
+                  This IP also supports one shared channel for both rx and tx;
+                  if this mode is used, one "rx-tx" name must be used.
+- clocks:         Must contain an entry for each entry in clock-names.
+                  Please refer to clock-bindings.txt.
+- clock-names:    Should be one of each entry matching the clocks phandles list:
+                  - "pclk" (peripheral clock) Required.
+                  - "gclk" (generated clock) Optional (1).
+                  - "aclk" (Audio PLL clock) Optional (1).
+                  - "muxclk" (I2S mux clock) Optional (1).
+
+Optional properties:
+- pinctrl-0:      Should specify pin control groups used for this controller.
+- princtrl-names: Should contain only one value - "default".
+
+
+(1) : Only the peripheral clock is required. The generated clock, the Audio
+      PLL clock adn the I2S mux clock are optional and should only be set
+      together, when Master Mode is required.
+
+Example:
+
+	i2s@f8050000 {
+		compatible = "atmel,sama5d2-i2s";
+		reg = <0xf8050000 0x300>;
+		interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+		dmas = <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(31))>,
+		       <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(32))>;
+		dma-names = "tx", "rx";
+		clocks = <&i2s0_clk>, <&i2s0_gclk>, <&audio_pll_pmc>, <&i2s0muxck>;
+		clock-names = "pclk", "gclk", "aclk", "muxclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s0_default>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/cs42xx8.txt b/Documentation/devicetree/bindings/sound/cs42xx8.txt
index f631fbca6284..8619a156d038 100644
--- a/Documentation/devicetree/bindings/sound/cs42xx8.txt
+++ b/Documentation/devicetree/bindings/sound/cs42xx8.txt
@@ -16,7 +16,7 @@ Required properties:
 
 Example:
 
-codec: cs42888@48 {
+cs42888: codec@48 {
 	compatible = "cirrus,cs42888";
 	reg = <0x48>;
 	clocks = <&codec_mclk 0>;
diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
index f5a14115b459..1d4d9f938689 100644
--- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
@@ -31,14 +31,16 @@ Required properties:
 			  it. This property is optional depending on the SoC
 			  design.
 
-   - big-endian		: If this property is absent, the little endian mode
-			  will be in use as default. Otherwise, the big endian
-			  mode will be in use for all the device registers.
-
    - fsl,asrc-rate	: Defines a mutual sample rate used by DPCM Back Ends.
 
    - fsl,asrc-width	: Defines a mutual sample width used by DPCM Back Ends.
 
+Optional properties:
+
+   - big-endian		: If this property is absent, the little endian mode
+			  will be in use as default. Otherwise, the big endian
+			  mode will be in use for all the device registers.
+
 Example:
 
 asrc: asrc@2034000 {
diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
index cacd18bb9ba6..5b9914367610 100644
--- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
@@ -42,6 +42,8 @@ Required properties:
 			  means all the settings for Receiving would be
 			  duplicated from Transmition related registers.
 
+Optional properties:
+
   - big-endian		: If this property is absent, the native endian mode
 			  will be in use as default, or the big endian mode
 			  will be in use for all the device registers.
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
index 38cfa7573441..8b324f82a782 100644
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
@@ -33,6 +33,8 @@ Required properties:
 			  it. This property is optional depending on the SoC
 			  design.
 
+Optional properties:
+
    - big-endian		: If this property is absent, the native endian mode
 			  will be in use as default, or the big endian mode
 			  will be in use for all the device registers.
diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt
index 740b467adf7d..dd9e59738e08 100644
--- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
@@ -28,9 +28,6 @@ Required properties:
 			  pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
 			  for details of the property values.
 
-  - big-endian		: Boolean property, required if all the FTM_PWM
-			  registers are big-endian rather than little-endian.
-
   - lsb-first		: Configures whether the LSB or the MSB is transmitted
 			  first for the fifo data. If this property is absent,
 			  the MSB is transmitted first as default, or the LSB
@@ -48,6 +45,11 @@ Required properties:
 			  receive data by following their own bit clocks and
 			  frame sync clocks separately.
 
+Optional properties:
+
+  - big-endian		: Boolean property, required if all the SAI
+			  registers are big-endian rather than little-endian.
+
 Optional properties (for mx6ul):
 
   - fsl,sai-mclk-direction-output: This is a boolean property. If present,
diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
index e2f7f4951215..560762e0a168 100644
--- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
+++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
@@ -1,7 +1,9 @@
 Mediatek AFE PCM controller for mt2701
 
 Required properties:
-- compatible = "mediatek,mt2701-audio";
+- compatible: should be one of the followings.
+	      - "mediatek,mt2701-audio"
+	      - "mediatek,mt7622-audio"
 - interrupts: should contain AFE and ASYS interrupts
 - interrupt-names: should be "afe" and "asys"
 - power-domains: should define the power domain
diff --git a/Documentation/devicetree/bindings/sound/mt6351.txt b/Documentation/devicetree/bindings/sound/mt6351.txt
new file mode 100644
index 000000000000..7fb2cb99245e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt6351.txt
@@ -0,0 +1,16 @@
+Mediatek MT6351 Audio Codec
+
+The communication between MT6351 and SoC is through Mediatek PMIC wrapper.
+For more detail, please visit Mediatek PMIC wrapper documentation.
+
+Must be a child node of PMIC wrapper.
+
+Required properties:
+
+- compatible : "mediatek,mt6351-sound".
+
+Example:
+
+mt6351_snd {
+	compatible = "mediatek,mt6351-sound";
+};
diff --git a/Documentation/devicetree/bindings/sound/mt6797-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt6797-afe-pcm.txt
new file mode 100644
index 000000000000..0ae29de15bfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt6797-afe-pcm.txt
@@ -0,0 +1,42 @@
+Mediatek AFE PCM controller for mt6797
+
+Required properties:
+- compatible = "mediatek,mt6797-audio";
+- reg: register location and size
+- interrupts: should contain AFE interrupt
+- power-domains: should define the power domain
+- clocks: Must contain an entry for each entry in clock-names
+- clock-names: should have these clock names:
+		"infra_sys_audio_clk",
+		"infra_sys_audio_26m",
+		"mtkaif_26m_clk",
+		"top_mux_audio",
+		"top_mux_aud_intbus",
+		"top_sys_pll3_d4",
+		"top_sys_pll1_d4",
+		"top_clk26m_clk";
+
+Example:
+
+	afe: mt6797-afe-pcm@11220000  {
+		compatible = "mediatek,mt6797-audio";
+		reg = <0 0x11220000 0 0x1000>;
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_LOW>;
+		power-domains = <&scpsys MT6797_POWER_DOMAIN_AUDIO>;
+		clocks = <&infrasys CLK_INFRA_AUDIO>,
+			 <&infrasys CLK_INFRA_AUDIO_26M>,
+			 <&infrasys CLK_INFRA_AUDIO_26M_PAD_TOP>,
+			 <&topckgen CLK_TOP_MUX_AUDIO>,
+			 <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
+			 <&topckgen CLK_TOP_SYSPLL3_D4>,
+			 <&topckgen CLK_TOP_SYSPLL1_D4>,
+			 <&clk26m>;
+		clock-names = "infra_sys_audio_clk",
+			      "infra_sys_audio_26m",
+			      "mtkaif_26m_clk",
+			      "top_mux_audio",
+			      "top_mux_aud_intbus",
+			      "top_sys_pll3_d4",
+			      "top_sys_pll1_d4",
+			      "top_clk26m_clk";
+	};
diff --git a/Documentation/devicetree/bindings/sound/mt6797-mt6351.txt b/Documentation/devicetree/bindings/sound/mt6797-mt6351.txt
new file mode 100644
index 000000000000..1d95a8840f19
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt6797-mt6351.txt
@@ -0,0 +1,14 @@
+MT6797 with MT6351 CODEC
+
+Required properties:
+- compatible: "mediatek,mt6797-mt6351-sound"
+- mediatek,platform: the phandle of MT6797 ASoC platform
+- mediatek,audio-codec: the phandles of MT6351 codec
+
+Example:
+
+	sound {
+		compatible = "mediatek,mt6797-mt6351-sound";
+		mediatek,audio-codec = <&mt6351_snd>;
+		mediatek,platform = <&afe>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
new file mode 100644
index 000000000000..aa54e49fc8a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
@@ -0,0 +1,109 @@
+* Qualcomm Technologies APQ8096 ASoC sound card driver
+
+This binding describes the APQ8096 sound card, which uses qdsp for audio.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,apq8096-sndcard"
+
+- qcom,audio-routing:
+	Usage: Optional
+	Value type: <stringlist>
+	Definition:  A list of the connections between audio components.
+		  Each entry is a pair of strings, the first being the
+		  connection's sink, the second being the connection's
+		  source. Valid names could be power supplies, MicBias
+		  of codec and the jacks on the board:
+		  Valid names include:
+
+		Board Connectors:
+			"Headphone Left"
+			"Headphone Right"
+			"Earphone"
+			"Line Out1"
+			"Line Out2"
+			"Line Out3"
+			"Line Out4"
+			"Analog Mic1"
+			"Analog Mic2"
+			"Analog Mic3"
+			"Analog Mic4"
+			"Analog Mic5"
+			"Analog Mic6"
+			"Digital Mic2"
+			"Digital Mic3"
+
+		Audio pins and MicBias on WCD9335 Codec:
+			"MIC_BIAS1
+			"MIC_BIAS2"
+			"MIC_BIAS3"
+			"MIC_BIAS4"
+			"AMIC1"
+			"AMIC2"
+			"AMIC3"
+			"AMIC4"
+			"AMIC5"
+			"AMIC6"
+			"AMIC6"
+			"DMIC1"
+			"DMIC2"
+			"DMIC3"
+= dailinks
+Each subnode of sndcard represents either a dailink, and subnodes of each
+dailinks would be cpu/codec/platform dais.
+
+- link-name:
+	Usage: required
+	Value type: <string>
+	Definition: User friendly name for dai link
+
+= CPU, PLATFORM, CODEC dais subnodes
+- cpu:
+	Usage: required
+	Value type: <subnode>
+	Definition: cpu dai sub-node
+
+- codec:
+	Usage: Optional
+	Value type: <subnode>
+	Definition: codec dai sub-node
+
+- platform:
+	Usage: Optional
+	Value type: <subnode>
+	Definition: platform dai sub-node
+
+- sound-dai:
+	Usage: required
+	Value type: <phandle with arguments>
+	Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node.
+
+Example:
+
+audio {
+	compatible = "qcom,apq8096-sndcard";
+	qcom,model = "DB820c";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	hdmi-dai-link {
+		link-name = "HDMI Playback";
+		cpu {
+			sound-dai = <&q6afe HDMI_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6adm>;
+		};
+
+		codec {
+			sound-dai = <&hdmi 0>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
new file mode 100644
index 000000000000..cb709e5dbc44
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
@@ -0,0 +1,33 @@
+Qualcomm Audio Device Manager (Q6ADM) binding
+
+Q6ADM is one of the APR audio service on Q6DSP.
+Please refer to qcom,apr.txt for details of the coommon apr service bindings
+used by the apr service device.
+
+- but must contain the following property:
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,q6adm-v<MAJOR-NUMBER>.<MINOR-NUMBER>".
+		   Or "qcom,q6adm" where the version number can be queried
+		   from DSP.
+		   example "qcom,q6adm-v2.0"
+
+
+= ADM routing
+"routing" subnode of the ADM node represents adm routing specific configuration
+
+- #sound-dai-cells
+	Usage: required
+	Value type: <u32>
+	Definition: Must be 0
+
+= EXAMPLE
+q6adm@8 {
+	compatible = "qcom,q6adm";
+	reg = <APR_SVC_ADM>;
+	q6routing: routing {
+		#sound-dai-cells = <0>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
new file mode 100644
index 000000000000..bdbf87df8c0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -0,0 +1,172 @@
+Qualcomm Audio Front End (Q6AFE) binding
+
+AFE is one of the APR audio service on Q6DSP
+Please refer to qcom,apr.txt for details of the common apr service bindings
+used by all apr services. Must contain the following properties.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,q6afe-v<MAJOR-NUMBER>.<MINOR-NUMBER>"
+		  Or "qcom,q6afe" where the version number can be queried
+		  from DSP.
+		  example "qcom,q6afe"
+