Merge tag 'media/v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Lots of improvement at atomisp driver, which is starting to look in
   good shape

 - Mediatek vcodec driver has gained support for av1 and hevc stateless
   codecs

 - New sensor driver: ov01a10

 - verisilicon driver has gained AV1 entropy helpers

 - tegra-video has gained support for Tegra20 parallel input

 - dvb core has gained an extra property to better support DVB-S2X

 - as usual, lots of cleanups, fixes and improvements on media drivers

* tag 'media/v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (253 commits)
  media: wl128x: fix a clang warning
  media: dvb: mb86a20s: get rid of a clang-15 warning
  media: cec: i2c: ch7322: also select REGMAP
  media: add HAS_IOPORT dependencies
  media: tc358746: select CONFIG_GENERIC_PHY
  media: mediatek: vcodec: Add dbgfs help function
  media: mediatek: vcodec: Add encode to support dbgfs
  media: mediatek: vcodec: Change dbgfs interface to support encode
  media: mediatek: vcodec: Get each instance format type
  media: mediatek: vcodec: Get each context resolution information
  media: mediatek: vcodec: Add a debugfs file to get different useful information
  media: mediatek: vcodec: Add debug params to control different log level
  media: mediatek: vcodec: Add debugfs interface to get debug information
  media: mediatek: vcodec: support stateless AV1 decoder
  media: verisilicon: Conditionally ignore native formats
  media: verisilicon: Enable AV1 decoder on rk3588
  media: verisilicon: Add film grain feature to AV1 driver
  media: verisilicon: Add Rockchip AV1 decoder
  media: verisilicon: Add AV1 entropy helpers
  media: verisilicon: Compute motion vectors size for AV1 frames
  ...

28 files changed, 1499 insertions, 26 deletions

diff --git a/Documentation/admin-guide/media/rkisp1.rst b/Documentation/admin-guide/media/rkisp1.rst
index ccf418713623..6f14d9561fa5 100644
--- a/Documentation/admin-guide/media/rkisp1.rst
+++ b/Documentation/admin-guide/media/rkisp1.rst
@@ -10,8 +10,8 @@ Introduction
 ============
 
 This file documents the driver for the Rockchip ISP1 that is part of RK3288
-and RK3399 SoCs. The driver is located under drivers/staging/media/rkisp1
-and uses the Media-Controller API.
+and RK3399 SoCs. The driver is located under drivers/media/platform/rockchip/
+rkisp1 and uses the Media-Controller API.
 
 Revisions
 =========
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
index a42bf33d1e7d..2181855a0920 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
@@ -73,6 +73,18 @@ properties:
   avdd-dsi-csi-supply:
     description: DSI/CSI power supply. Must supply 1.2 V.
 
+  vip:
+    $ref: /schemas/display/tegra/nvidia,tegra20-vip.yaml
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input from the VIP (parallel input capture) module
+
 patternProperties:
   "^csi@[0-9a-f]+$":
     type: object
@@ -108,6 +120,22 @@ examples:
     #include <dt-bindings/clock/tegra20-car.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        camera@48 {
+            compatible = "aptina,mt9v111";
+            reg = <0x48>;
+            clocks = <&camera_clk>;
+
+            port {
+                mt9v111_out: endpoint {
+                    remote-endpoint = <&vi_vip_in>;
+                };
+            };
+        };
+    };
+
     vi@54080000 {
         compatible = "nvidia,tegra20-vi";
         reg = <0x54080000 0x00040000>;
@@ -115,6 +143,37 @@ examples:
         clocks = <&tegra_car TEGRA20_CLK_VI>;
         resets = <&tegra_car 100>;
         reset-names = "vi";
+
+        vip {
+            compatible = "nvidia,tegra20-vip";
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    vi_vip_in: endpoint {
+                        remote-endpoint = <&mt9v111_out>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    vi_vip_out: endpoint {
+                        remote-endpoint = <&vi_in>;
+                    };
+                };
+            };
+        };
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                vi_in: endpoint {
+                    remote-endpoint = <&vi_vip_out>;
+                };
+            };
+        };
     };
 
   - |
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml
new file mode 100644
index 000000000000..14294edb8d8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra VIP (parallel video capture) controller
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-vip
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port receiving the video stream from the sensor
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port sending the video stream to the VI
+
+    required:
+      - port@0
+      - port@1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - ports
+
+# see nvidia,tegra20-vi.yaml for an example
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
index 444f24838d3d..6c72e77b927c 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
@@ -65,9 +65,14 @@ properties:
 
             properties:
               data-lanes: true
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
 
             required:
               - data-lanes
+              - bus-type
 
     required:
       - port@4
@@ -82,6 +87,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
 
     i2c@e6508000 {
             #address-cells = <1>;
@@ -101,6 +107,7 @@ examples:
                             port@4 {
                                     reg = <4>;
                                     max96712_out0: endpoint {
+                                            bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
                                             clock-lanes = <0>;
                                             data-lanes = <1 2 3 4>;
                                             remote-endpoint = <&csi40_in>;
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
index eb1499912c58..9cc0a968a401 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
@@ -155,7 +155,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/qcom,gcc-msm8916.h>
 
-    camss: camss@1b00000 {
+    camss: camss@1b0ac00 {
       compatible = "qcom,msm8916-camss";
 
       clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
index 8a10aa1cafc5..5cb0e337ea6e 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
@@ -221,7 +221,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-msm8996.h>
     #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
 
-    camss: camss@a00000 {
+    camss: camss@a34000 {
       compatible = "qcom,msm8996-camss";
 
       clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
index 0a109e126064..584106e275f6 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
@@ -227,7 +227,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sdm660.h>
     #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
 
-    camss: camss@ca00000 {
+    camss: camss@ca00020 {
       compatible = "qcom,sdm660-camss";
 
       clocks = <&mmcc CAMSS_AHB_CLK>,
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
index 1530ad0d80bd..ec4380a0a03f 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
@@ -219,7 +219,7 @@ examples:
       #address-cells = <2>;
       #size-cells = <2>;
 
-      camss: camss@a00000 {
+      camss: camss@acb3000 {
         compatible = "qcom,sdm845-camss";
 
         clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
index ee622a8ee1cc..772ec3283bc6 100644
--- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
@@ -24,6 +24,7 @@ properties:
           - rockchip,rk3399-vpu
           - rockchip,px30-vpu
           - rockchip,rk3568-vpu
+          - rockchip,rk3588-av1-vpu
       - items:
           - const: rockchip,rk3188-vpu
           - const: rockchip,rk3066-vpu
diff --git a/Documentation/driver-api/media/camera-sensor.rst b/Documentation/driver-api/media/camera-sensor.rst
index c7d4891bd24e..93f4f2536c25 100644
--- a/Documentation/driver-api/media/camera-sensor.rst
+++ b/Documentation/driver-api/media/camera-sensor.rst
@@ -151,3 +151,25 @@ used to obtain device's power state after the power state transition:
 The function returns a non-zero value if it succeeded getting the power count or
 runtime PM was disabled, in either of which cases the driver may proceed to
 access the device.
+
+Rotation, orientation and flipping
+----------------------------------
+
+Some systems have the camera sensor mounted upside down compared to its natural
+mounting rotation. In such cases, drivers shall expose the information to
+userspace with the :ref:`V4L2_CID_CAMERA_SENSOR_ROTATION
+<v4l2-camera-sensor-rotation>` control.
+
+Sensor drivers shall also report the sensor's mounting orientation with the
+:ref:`V4L2_CID_CAMERA_SENSOR_ORIENTATION <v4l2-camera-sensor-orientation>`.
+
+Use ``v4l2_fwnode_device_parse()`` to obtain rotation and orientation
+information from system firmware and ``v4l2_ctrl_new_fwnode_properties()`` to
+register the appropriate controls.
+
+Sensor drivers that have any vertical or horizontal flips embedded in the
+register programming sequences shall initialize the V4L2_CID_HFLIP and
+V4L2_CID_VFLIP controls with the values programmed by the register sequences.
+The default values of these controls shall be 0 (disabled). Especially these
+controls shall not be inverted, independently of the sensor's mounting
+rotation.
diff --git a/Documentation/userspace-api/media/frontend.h.rst.exceptions b/Documentation/userspace-api/media/frontend.h.rst.exceptions
index 8b73fee11a79..dcaf5740de7e 100644
--- a/Documentation/userspace-api/media/frontend.h.rst.exceptions
+++ b/Documentation/userspace-api/media/frontend.h.rst.exceptions
@@ -142,6 +142,10 @@ ignore symbol FEC_26_45
 ignore symbol FEC_28_45
 ignore symbol FEC_32_45
 ignore symbol FEC_77_90
+ignore symbol FEC_11_45
+ignore symbol FEC_4_15
+ignore symbol FEC_14_45
+ignore symbol FEC_7_15
 
 ignore symbol TRANSMISSION_MODE_AUTO
 ignore symbol TRANSMISSION_MODE_1K
diff --git a/Documentation/userspace-api/media/v4l/biblio.rst b/Documentation/userspace-api/media/v4l/biblio.rst
index 9cd18c153d19..72aef1759b60 100644
--- a/Documentation/userspace-api/media/v4l/biblio.rst
+++ b/Documentation/userspace-api/media/v4l/biblio.rst
@@ -427,3 +427,12 @@ VP9
 :title:     VP9 Bitstream & Decoding Process Specification
 
 :author:    Adrian Grange (Google), Peter de Rivaz (Argon Design), Jonathan Hunt (Argon Design)
+
+.. _av1:
+
+AV1
+===
+
+:title:     AV1 Bitstream & Decoding Process Specification
+
+:author:    Peter de Rivaz, Argon Design Ltd, Jack Haughton, Argon Design Ltd
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
index daa4f40869f8..cdc515c60468 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
@@ -506,6 +506,8 @@ enum v4l2_scene_mode -
     value down. A value of zero stops the motion if one is in progress
     and has no effect otherwise.
 
+.. _v4l2-camera-sensor-orientation:
+
 ``V4L2_CID_CAMERA_ORIENTATION (menu)``
     This read-only control describes the camera orientation by reporting its
     mounting position on the device where the camera is installed. The control
@@ -536,6 +538,7 @@ enum v4l2_scene_mode -
       - The camera is not directly attached to the device and is freely movable.
 
 
+.. _v4l2-camera-sensor-rotation:
 
 ``V4L2_CID_CAMERA_SENSOR_ROTATION (integer)``
     This read-only control describes the rotation correction in degrees in the
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
index 3d8411acd5b8..81e60f4002c8 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
@@ -1890,11 +1890,11 @@ params syntax' of the :ref:`vp9` specification for more details.
     * - __u8
       - ``tree_probs[7]``
       - Specifies the probability values to be used when decoding a Segment-ID.
-        See '5.15. Segmentation map' section of :ref:`vp9` for more details.
+        See '5.15 Segmentation map' section of :ref:`vp9` for more details.
     * - __u8
       - ``pred_probs[3]``
       - Specifies the probability values to be used when decoding a
-        Predicted-Segment-ID. See '6.4.14. Get segment id syntax'
+        Predicted-Segment-ID. See '6.4.14 Get segment id syntax'
         section of :ref:`vp9` for more details.
     * - __u8
       - ``flags``
@@ -2923,6 +2923,13 @@ This structure contains all loop filter related parameters. See sections
       - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
       - PocLtCurr as described in section 8.3.2 "Decoding process for reference
         picture set": provides the index of the long term references in DPB array.
+    * - __u8
+      - ``num_delta_pocs_of_ref_rps_idx``
+      - When the short_term_ref_pic_set_sps_flag in the slice header is equal to 0,
+        it is the same as the derived value NumDeltaPocs[RefRpsIdx]. It can be used to parse
+        the RPS data in slice headers instead of skipping it with @short_term_ref_pic_set_size.
+        When the value of short_term_ref_pic_set_sps_flag in the slice header is
+        equal to 1, num_delta_pocs_of_ref_rps_idx shall be set to 0.
     * - struct :c:type:`v4l2_hevc_dpb_entry`
       - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
       - The decoded picture buffer, for meta-data about reference frames.
@@ -2950,3 +2957,1208 @@ This structure contains all loop filter related parameters. See sections
     * - ``V4L2_HEVC_DECODE_PARAM_FLAG_NO_OUTPUT_OF_PRIOR``
       - 0x00000004
       -
+
+.. _v4l2-codec-stateless-av1:
+
+``V4L2_CID_STATELESS_AV1_SEQUENCE (struct)``
+    Represents an AV1 Sequence OBU (Open Bitstream Unit). See section 5.5
+    "Sequence header OBU syntax" in :ref:`av1` for more details.
+
+.. c:type:: v4l2_ctrl_av1_sequence
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}|
+
+.. flat-table:: struct v4l2_ctrl_av1_sequence
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``flags``
+      - See :ref:`AV1 Sequence Flags <av1_sequence_flags>`.
+    * - __u8
+      - ``seq_profile``
+      - Specifies the features that can be used in the coded video sequence.
+    * - __u8
+      - ``order_hint_bits``
+      - Specifies the number of bits used for the order_hint field at each frame.
+    * - __u8
+      - ``bit_depth``
+      - the bit depth to use for the sequence as described in section 5.5.2
+        "Color config syntax" in :ref:`av1` for more details.
+    * - __u8
+      - ``reserved``
+      - Applications and drivers must set this to zero.
+    * - __u16
+      - ``max_frame_width_minus_1``
+      - specifies the maximum frame width minus 1 for the frames represented by
+        this sequence header.
+
+.. _av1_sequence_flags:
+
+``AV1 Sequence Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_SEQUENCE_FLAG_STILL_PICTURE``
+      - 0x00000001
+      - If set, specifies that the coded video sequence contains only one coded
+        frame. If not set, specifies that the coded video sequence contains one
+        or more coded frames.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_USE_128X128_SUPERBLOCK``
+      - 0x00000002
+      - If set, indicates that superblocks contain 128x128 luma samples.
+        When equal to 0, it indicates that superblocks contain 64x64 luma
+        samples. The number of contained chroma samples depends on
+        subsampling_x and subsampling_y.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_FILTER_INTRA``
+      - 0x00000004
+      - If set, specifies that the use_filter_intra syntax element may be
+        present. If not set, specifies that the use_filter_intra syntax element
+        will not be present.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTRA_EDGE_FILTER``
+      - 0x00000008
+      - Specifies whether the intra edge filtering process should be enabled.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTERINTRA_COMPOUND``
+      - 0x00000010
+      - If set, specifies that the mode info for inter blocks may contain the
+        syntax element interintra. If not set, specifies that the syntax element
+        interintra will not be present.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_MASKED_COMPOUND``
+      - 0x00000020
+      - If set, specifies that the mode info for inter blocks may contain the
+        syntax element compound_type. If not set, specifies that the syntax
+        element compound_type will not be present.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_WARPED_MOTION``
+      - 0x00000040
+      - If set, indicates that the allow_warped_motion syntax element may be
+        present. If not set, indicates that the allow_warped_motion syntax
+        element will not be present.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_DUAL_FILTER``
+      - 0x00000080
+      - If set, indicates that the inter prediction filter type may be specified
+        independently in the horizontal and vertical directions. If the flag is
+        equal to 0, only one filter type may be specified, which is then used in
+        both directions.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_ORDER_HINT``
+      - 0x00000100
+      - If set, indicates that tools based on the values of order hints may be
+        used. If not set, indicates that tools based on order hints are
+        disabled.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_JNT_COMP``
+      - 0x00000200
+      - If set, indicates that the distance weights process may be used for
+        inter prediction.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_REF_FRAME_MVS``
+      - 0x00000400
+      - If set, indicates that the use_ref_frame_mvs syntax element may be
+        present. If not set, indicates that the use_ref_frame_mvs syntax element
+        will not be present.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_SUPERRES``
+      - 0x00000800
+      - If set, specifies that the use_superres syntax element will be present
+        in the uncompressed header. If not set, specifies that the use_superres
+        syntax element will not be present (instead use_superres will be set to
+        0 in the uncompressed header without being read).
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_CDEF``
+      - 0x00001000
+      - If set, specifies that cdef filtering may be enabled. If not set,
+        specifies that cdef filtering is disabled.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_RESTORATION``
+      - 0x00002000
+      - If set, specifies that loop restoration filtering may be enabled. If not
+        set, specifies that loop restoration filtering is disabled.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_MONO_CHROME``
+      - 0x00004000
+      - If set, indicates that the video does not contain U and V color planes.
+        If not set, indicates that the video contains Y, U, and V color planes.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_COLOR_RANGE``
+      - 0x00008000
+      - If set, signals full swing representation, i.e. "Full Range
+        Quantization". If not set, signals studio swing representation, i.e.
+        "Limited Range Quantization".
+    * - ``V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_X``
+      - 0x00010000
+      - Specify the chroma subsampling format.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_Y``
+      - 0x00020000
+      - Specify the chroma subsampling format.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_FILM_GRAIN_PARAMS_PRESENT``
+      - 0x00040000
+      - Specifies whether film grain parameters are present in the coded video
+        sequence.
+    * - ``V4L2_AV1_SEQUENCE_FLAG_SEPARATE_UV_DELTA_Q``
+      - 0x00080000
+      - If set, indicates that the U and V planes may have separate delta
+        quantizer values. If not set, indicates that the U and V planes will share
+        the same delta quantizer value.
+
+``V4L2_CID_STATELESS_AV1_TILE_GROUP_ENTRY (struct)``
+    Represents a single AV1 tile inside an AV1 Tile Group. Note that MiRowStart,
+    MiRowEnd, MiColStart and MiColEnd can be retrieved from struct
+    v4l2_av1_tile_info in struct v4l2_ctrl_av1_frame using tile_row and
+    tile_col. See section 6.10.1 "General tile group OBU semantics" in
+    :ref:`av1` for more details.
+
+.. c:type:: v4l2_ctrl_av1_tile_group_entry
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}|
+
+.. flat-table:: struct v4l2_ctrl_av1_tile_group_entry
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``tile_offset``
+      - Offset from the OBU data, i.e. where the coded tile data actually starts.
+    * - __u32
+      - ``tile_size``
+      - Specifies the size in bytes of the coded tile. Equivalent to "TileSize"
+        in :ref:`av1`.
+    * - __u32
+      - ``tile_row``
+      - Specifies the row of the current tile. Equivalent to "TileRow" in
+        :ref:`av1`.
+    * - __u32
+      - ``tile_col``
+      - Specifies the column of the current tile. Equivalent to "TileColumn" in
+        :ref:`av1`.
+
+.. c:type:: v4l2_av1_warp_model
+
+	AV1 Warp Model as described in section 3 "Symbols and abbreviated terms" of
+	:ref:`av1`.
+
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_WARP_MODEL_IDENTITY``
+      - 0
+      - Warp model is just an identity transform.
+    * - ``V4L2_AV1_WARP_MODEL_TRANSLATION``
+      - 1
+      - Warp model is a pure translation.
+    * - ``V4L2_AV1_WARP_MODEL_ROTZOOM``
+      - 2
+      - Warp model is a rotation + symmetric zoom + translation.
+    * - ``V4L2_AV1_WARP_MODEL_AFFINE``
+      - 3
+      - Warp model is a general affine transform.
+
+.. c:type:: v4l2_av1_reference_frame
+
+AV1 Reference Frames as described in section 6.10.24 "Ref frames semantics"
+of :ref:`av1`.
+
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_AV1_REF_INTRA_FRAME``
+      - 0
+      - Intra Frame Reference.
+    * - ``V4L2_AV1_REF_LAST_FRAME``
+      - 1
+      - Last Frame Reference.
+    * - ``V4L2_AV1_REF_LAST2_FRAME``
+      - 2
+      - Last2 Frame Reference.
+    * - ``V4L2_AV1_REF_LAST3_FRAME``
+      - 3
+      - Last3 Frame Reference.
+    * - ``V4L2_AV1_REF_GOLDEN_FRAME``
+      - 4
+      - Golden Frame Reference.
+    * - ``V4L2_AV1_REF_BWDREF_FRAME``
+      - 5
+      - BWD Frame Reference.
+    * - ``V4L2_AV1_REF_ALTREF2_FRAME``
+      - 6
+      - ALTREF2 Frame Reference.
+    * - ``V4L2_AV1_REF_ALTREF_FRAME``
+      - 7
+      - ALTREF Frame Reference.
+
+.. c:type:: v4l2_av1_global_motion
+
+AV1 Global Motion parameters as described in section 6.8.17
+"Global motion params semantics" of :ref:`av1`.
+
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}|
+
+.. flat-table:: struct v4l2_av1_global_motion
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``flags[V4L2_AV1_TOTAL_REFS_PER_FRAME]``
+      - A bitfield containing the flags per reference frame. See
+        :ref:`AV1 Global Motion Flags <av1_global_motion_flags>` for more
+        details.
+    * - enum :c:type:`v4l2_av1_warp_model`
+      - ``type[V4L2_AV1_TOTAL_REFS_PER_FRAME]``
+      - The type of global motion transform used.
+    * - __s32
+      - ``params[V4L2_AV1_TOTAL_REFS_PER_FRAME][6]``
+      - This field has the same meaning as "gm_params" in :ref:`av1`.
+    * - __u8