Merge tag 'asoc-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.13

This release was mainly about new drivers, there's a very large batch of
new drivers and devices including quite a few from newer vendors which
is great to see.  Other than the new drivers and the usual routine fixes
and enhancements the bulk of the work has been Morimoto-san's continuing
work on simplifiying APIs, plus a few other bits:

 - More API simplifications from Morimoto-san.
 - Renaming of the sh directory to Renesas to reflect the focus on other
   architectures.
 - Factoring out of some of the common code for Realtek devices.
 - Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
   Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon
   I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm
   SM8750, RealTek RT721, and ST Microelectronics STM32MP25.

60 files changed, 1276 insertions, 407 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 1518343bbe22..1666576acc0e 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -6688,7 +6688,7 @@
 			0: no polling (default)
 
 	thp_anon=	[KNL]
-			Format: <size>,<size>[KMG]:<state>;<size>-<size>[KMG]:<state>
+			Format: <size>[KMG],<size>[KMG]:<state>;<size>[KMG]-<size>[KMG]:<state>
 			state is one of "always", "madvise", "never" or "inherit".
 			Control the default behavior of the system with respect
 			to anonymous transparent hugepages.
diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst
index cfdd16a52e39..a1bb495eab59 100644
--- a/Documentation/admin-guide/mm/transhuge.rst
+++ b/Documentation/admin-guide/mm/transhuge.rst
@@ -303,7 +303,7 @@ control by passing the parameter ``transparent_hugepage=always`` or
 kernel command line.
 
 Alternatively, each supported anonymous THP size can be controlled by
-passing ``thp_anon=<size>,<size>[KMG]:<state>;<size>-<size>[KMG]:<state>``,
+passing ``thp_anon=<size>[KMG],<size>[KMG]:<state>;<size>[KMG]-<size>[KMG]:<state>``,
 where ``<size>`` is the THP size (must be a power of 2 of PAGE_SIZE and
 supported anonymous THP)  and ``<state>`` is one of ``always``, ``madvise``,
 ``never`` or ``inherit``.
diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst
index fe1be4ad88cb..a21369eba034 100644
--- a/Documentation/admin-guide/pm/cpufreq.rst
+++ b/Documentation/admin-guide/pm/cpufreq.rst
@@ -425,8 +425,8 @@ This governor exposes only one tunable:
 
 ``rate_limit_us``
 	Minimum time (in microseconds) that has to pass between two consecutive
-	runs of governor computations (default: 1000 times the scaling driver's
-	transition latency).
+	runs of governor computations (default: 1.5 times the scaling driver's
+	transition latency or the maximum 2ms).
 
 	The purpose of this tunable is to reduce the scheduler context overhead
 	of the governor which might be excessive without it.
@@ -474,17 +474,17 @@ This governor exposes the following tunables:
 	This is how often the governor's worker routine should run, in
 	microseconds.
 
-	Typically, it is set to values of the order of 10000 (10 ms).  Its
-	default value is equal to the value of ``cpuinfo_transition_latency``
-	for each policy this governor is attached to (but since the unit here
-	is greater by 1000, this means that the time represented by
-	``sampling_rate`` is 1000 times greater than the transition latency by
-	default).
+	Typically, it is set to values of the order of 2000 (2 ms).  Its
+	default value is to add a 50% breathing room
+	to ``cpuinfo_transition_latency`` on each policy this governor is
+	attached to. The minimum is typically the length of two scheduler
+	ticks.
 
 	If this tunable is per-policy, the following shell command sets the time
-	represented by it to be 750 times as high as the transition latency::
+	represented by it to be 1.5 times as high as the transition latency
+	(the default)::
 
-	# echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) > ondemand/sampling_rate
+	# echo `$(($(cat cpuinfo_transition_latency) * 3 / 2)) > ondemand/sampling_rate
 
 ``up_threshold``
 	If the estimated CPU load is above this value (in percent), the governor
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index 3a82aec9021c..497c0eb4ed0b 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -63,6 +63,16 @@ properties:
       - const: sleep
 
   power-domains:
+    description: |
+      The MediaTek DPI module is typically associated with one of the
+      following multimedia power domains:
+        POWER_DOMAIN_DISPLAY
+        POWER_DOMAIN_VDOSYS
+        POWER_DOMAIN_MM
+      The specific power domain used varies depending on the SoC design.
+
+      It is recommended to explicitly add the appropriate power domain
+      property to the DPI node in the device tree.
     maxItems: 1
 
   port:
@@ -79,20 +89,6 @@ required:
   - clock-names
   - port
 
-allOf:
-  - if:
-      not:
-        properties:
-          compatible:
-            contains:
-              enum:
-                - mediatek,mt6795-dpi
-                - mediatek,mt8173-dpi
-                - mediatek,mt8186-dpi
-    then:
-      properties:
-        power-domains: false
-
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
index e4affc854f3d..4b6ff546757e 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
@@ -38,6 +38,7 @@ properties:
     description: A phandle and PM domain specifier as defined by bindings of
       the power controller specified by phandle. See
       Documentation/devicetree/bindings/power/power-domain.yaml for details.
+    maxItems: 1
 
   mediatek,gce-client-reg:
     description:
@@ -57,6 +58,9 @@ properties:
   clocks:
     items:
       - description: SPLIT Clock
+      - description: Used for interfacing with the HDMI RX signal source.
+      - description: Paired with receiving HDMI RX metadata.
+    minItems: 1
 
 required:
   - compatible
@@ -72,9 +76,24 @@ allOf:
             const: mediatek,mt8195-mdp3-split
 
     then:
+      properties:
+        clocks:
+          minItems: 3
+
       required:
         - mediatek,gce-client-reg
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8173-disp-split
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index 54d7d11bfed4..ff7a6f12cd00 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -124,7 +124,7 @@ properties:
       atomic mode of operation, even if requested.
     default: 0
 
-  max-rx-timeout-ms:
+  arm,max-rx-timeout-ms:
     description:
       An optional time value, expressed in milliseconds, representing the
       transport maximum timeout value for the receive channel. The value should
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
index bd19abb867d9..0065d6508824 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
@@ -67,6 +67,10 @@ properties:
       A 2.5V to 3.3V supply for the external reference voltage. When omitted,
       the internal 2.5V reference is used.
 
+  refin-supply:
+    description:
+      A 2.5V to 3.3V supply for external reference voltage, for ad7380-4 only.
+
   aina-supply:
     description:
       The common mode voltage supply for the AINA- pin on pseudo-differential
@@ -135,6 +139,23 @@ allOf:
         ainc-supply: false
         aind-supply: false
 
+  # ad7380-4 uses refin-supply as external reference.
+  # All other chips from ad738x family use refio as optional external reference.
+  # When refio-supply is omitted, internal reference is used.
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7380-4
+    then:
+      properties:
+        refio-supply: false
+      required:
+        - refin-supply
+    else:
+      properties:
+        refin-supply: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
index e95c21628281..fb02e579463c 100644
--- a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
@@ -61,7 +61,7 @@ properties:
       - gmii
       - rgmii
       - sgmii
-      - 1000BaseX
+      - 1000base-x
 
   xlnx,phy-type:
     description:
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index dcf4fa55fbba..380a9222a51d 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -154,8 +154,6 @@ allOf:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
               - qcom,sm8650-qmp-gen3x2-pcie-phy
               - qcom,sm8650-qmp-gen4x2-pcie-phy
-              - qcom,x1e80100-qmp-gen3x2-pcie-phy
-              - qcom,x1e80100-qmp-gen4x2-pcie-phy
     then:
       properties:
         clocks:
@@ -171,6 +169,8 @@ allOf:
               - qcom,sc8280xp-qmp-gen3x1-pcie-phy
               - qcom,sc8280xp-qmp-gen3x2-pcie-phy
               - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+              - qcom,x1e80100-qmp-gen3x2-pcie-phy
+              - qcom,x1e80100-qmp-gen4x2-pcie-phy
               - qcom,x1e80100-qmp-gen4x4-pcie-phy
     then:
       properties:
@@ -201,6 +201,7 @@ allOf:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
               - qcom,sm8650-qmp-gen4x2-pcie-phy
               - qcom,x1e80100-qmp-gen4x2-pcie-phy
+              - qcom,x1e80100-qmp-gen4x4-pcie-phy
     then:
       properties:
         resets:
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1373.yaml b/Documentation/devicetree/bindings/sound/adi,adau1373.yaml
new file mode 100644
index 000000000000..97552bf5d951
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau1373.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,adau1373.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADAU1373 CODEC
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices ADAU1373 Low power codec with speaker and headphone amplifiers.
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1373.pdf
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,adau1373
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  powerdown-gpios:
+    description: GPIO used for hardware power-down.
+    maxItems: 1
+
+  adi,micbias1-microvolt:
+    description:
+      This property sets the microphone bias voltage for the first microphone.
+    enum: [1800000, 2200000, 2600000, 2900000]
+    default: 2900000
+
+  adi,micbias2-microvolt:
+    description:
+      This property sets the microphone bias voltage for the second microphone.
+    enum: [1800000, 2200000, 2600000, 2900000]
+    default: 2900000
+
+  adi,input1-differential:
+    description: This property sets the first analog input as differential.
+    type: boolean
+
+  adi,input2-differential:
+    description: This property sets the second analog input as differential.
+    type: boolean
+
+  adi,input3-differential:
+    description: This property sets the third analog input as differential.
+    type: boolean
+
+  adi,input4-differential:
+    description: This property sets the fourth analog input as differential.
+    type: boolean
+
+  adi,lineout-differential:
+    description: This property sets the line output as differential.
+    type: boolean
+
+  adi,lineout-gnd-sense:
+    description: This property enables the line output ground sense control.
+    type: boolean
+
+  adi,drc-settings:
+    description:
+      This setting is used to control the dynamic range of the signal. The
+      device provides a maximum of three full band DRCs with 13 entries each.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    oneOf:
+      - minItems: 13
+        maxItems: 13
+      - minItems: 26
+        maxItems: 26
+      - minItems: 39
+        maxItems: 39
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        audio-codec@1a {
+            compatible = "adi,adau1373";
+            reg = <0x1a>;
+            #sound-dai-cells = <0>;
+            powerdown-gpios = <&gpio 100 GPIO_ACTIVE_LOW>;
+            adi,input2-differential;
+            adi,input1-differential;
+            adi,lineout-differential;
+            adi,micbias2-microvolt = <1800000>;
+            adi,drc-settings = /bits/ 8 <
+                0xff 0xff 0x1 0x2 0xa 0xa 0xd 0x1 0xff 0xff 0x5 0xd 0xff
+            >;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
index 78273647f766..ebc9097f936a 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
@@ -22,6 +22,7 @@ properties:
       - allwinner,sun8i-a23-codec
       - allwinner,sun8i-h3-codec
       - allwinner,sun8i-v3s-codec
+      - allwinner,sun50i-h616-codec
 
   reg:
     maxItems: 1
@@ -40,14 +41,20 @@ properties:
       - const: codec
 
   dmas:
-    items:
-      - description: RX DMA Channel
-      - description: TX DMA Channel
+    oneOf:
+      - items:
+          - description: RX DMA Channel
+          - description: TX DMA Channel
+      - items:
+          - description: TX DMA Channel
 
   dma-names:
-    items:
-      - const: rx
-      - const: tx
+    oneOf:
+      - items:
+          - const: rx
+          - const: tx
+      - items:
+          - const: tx
 
   resets:
     maxItems: 1
@@ -229,6 +236,40 @@ allOf:
               - Mic
               - Speaker
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun50i-h616-codec
+
+    then:
+      properties:
+        allwinner,audio-routing:
+          items:
+            enum:
+              - LINEOUT
+              - Line Out
+
+        dmas:
+          items:
+            - description: TX DMA Channel
+
+        dma-names:
+          items:
+            - const: tx
+
+    else:
+      properties:
+        dmas:
+          items:
+            - description: RX DMA Channel
+            - description: TX DMA Channel
+
+        dma-names:
+          items:
+            - const: rx
+            - const: tx
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/sound/audio-graph.yaml b/Documentation/devicetree/bindings/sound/audio-graph.yaml
index 71f52f7e55f6..9899d9d1958d 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph.yaml
@@ -37,8 +37,14 @@ properties:
   pa-gpios:
     maxItems: 1
   hp-det-gpio:
+    deprecated: true
+    maxItems: 1
+  hp-det-gpios:
     maxItems: 1
   mic-det-gpio:
+    deprecated: true
+    maxItems: 1
+  mic-det-gpios:
     maxItems: 1
 
 required:
diff --git a/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml
index ac5f2e0f42cb..3b0b74