Merge tag 'net-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from bluetooth.

  Current release - regressions:

   - rtnetlink: fix rtnl_dump_ifinfo() error path

   - bluetooth: remove the redundant sco_conn_put

  Previous releases - regressions:

   - netlink: fix false positive warning in extack during dumps

   - sched: sch_fq: don't follow the fast path if Tx is behind now

   - ipv6: delete temporary address if mngtmpaddr is removed or
     unmanaged

   - tcp: fix use-after-free of nreq in reqsk_timer_handler().

   - bluetooth: fix slab-use-after-free Read in set_powered_sync

   - l2tp: fix warning in l2tp_exit_net found

   - eth:
       - bnxt_en: fix receive ring space parameters when XDP is active
       - lan78xx: fix double free issue with interrupt buffer allocation
       - tg3: set coherent DMA mask bits to 31 for BCM57766 chipsets

  Previous releases - always broken:

   - ipmr: fix tables suspicious RCU usage

   - iucv: MSG_PEEK causes memory leak in iucv_sock_destruct()

   - eth:
       - octeontx2-af: fix low network performance
       - stmmac: dwmac-socfpga: set RX watchdog interrupt as broken
       - rtase: correct the speed for RTL907XD-V1

  Misc:

   - some documentation fixup"

* tag 'net-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
  ipmr: fix build with clang and DEBUG_NET disabled.
  Documentation: tls_offload: fix typos and grammar
  Fix spelling mistake
  ipmr: fix tables suspicious RCU usage
  ip6mr: fix tables suspicious RCU usage
  ipmr: add debug check for mr table cleanup
  selftests: rds: move test.py to TEST_FILES
  net_sched: sch_fq: don't follow the fast path if Tx is behind now
  tcp: Fix use-after-free of nreq in reqsk_timer_handler().
  net: phy: fix phy_ethtool_set_eee() incorrectly enabling LPI
  net: Comment copy_from_sockptr() explaining its behaviour
  rxrpc: Improve setsockopt() handling of malformed user input
  llc: Improve setsockopt() handling of malformed user input
  Bluetooth: SCO: remove the redundant sco_conn_put
  Bluetooth: MGMT: Fix possible deadlocks
  Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync
  bnxt_en: Unregister PTP during PCI shutdown and suspend
  bnxt_en: Refactor bnxt_ptp_init()
  bnxt_en: Fix receive ring space parameters when XDP is active
  bnxt_en: Fix queue start to update vnic RSS table
  ...

2 files changed, 16 insertions, 15 deletions

diff --git a/Documentation/networking/cdc_mbim.rst b/Documentation/networking/cdc_mbim.rst
index 37f968acc473..8404a3f794f3 100644
--- a/Documentation/networking/cdc_mbim.rst
+++ b/Documentation/networking/cdc_mbim.rst
@@ -51,7 +51,7 @@ Such userspace applications includes, but are not limited to:
  - mbimcli (included with the libmbim [3] library), and
  - ModemManager [4]
 
-Establishing a MBIM IP session reequires at least these actions by the
+Establishing a MBIM IP session requires at least these actions by the
 management application:
 
  - open the control channel
diff --git a/Documentation/networking/tls-offload.rst b/Documentation/networking/tls-offload.rst
index 5f0dea3d571e..7354d48cdf92 100644
--- a/Documentation/networking/tls-offload.rst
+++ b/Documentation/networking/tls-offload.rst
@@ -51,7 +51,7 @@ and send them to the device for encryption and transmission.
 RX
 --
 
-On the receive side if the device handled decryption and authentication
+On the receive side, if the device handled decryption and authentication
 successfully, the driver will set the decrypted bit in the associated
 :c:type:`struct sk_buff <sk_buff>`. The packets reach the TCP stack and
 are handled normally. ``ktls`` is informed when data is queued to the socket
@@ -120,8 +120,9 @@ before installing the connection state in the kernel.
 RX
 --
 
-In RX direction local networking stack has little control over the segmentation,
-so the initial records' TCP sequence number may be anywhere inside the segment.
+In the RX direction, the local networking stack has little control over
+segmentation, so the initial records' TCP sequence number may be anywhere
+inside the segment.
 
 Normal operation
 ================
@@ -138,8 +139,8 @@ There are no guarantees on record length or record segmentation. In particular
 segments may start at any point of a record and contain any number of records.
 Assuming segments are received in order, the device should be able to perform
 crypto operations and authentication regardless of segmentation. For this
-to be possible device has to keep small amount of segment-to-segment state.
-This includes at least:
+to be possible, the device has to keep a small amount of segment-to-segment
+state. This includes at least:
 
  * partial headers (if a segment carried only a part of the TLS header)
  * partial data block
@@ -175,12 +176,12 @@ and packet transformation functions) the device validates the Layer 4
 checksum and performs a 5-tuple lookup to find any TLS connection the packet
 may belong to (technically a 4-tuple
 lookup is sufficient - IP addresses and TCP port numbers, as the protocol
-is always TCP). If connection is matched device confirms if the TCP sequence
-number is the expected one and proceeds to TLS handling (record delineation,
-decryption, authentication for each record in the packet). The device leaves
-the record framing unmodified, the stack takes care of record decapsulation.
-Device indicates successful handling of TLS offload in the per-packet context
-(descriptor) passed to the host.
+is always TCP). If the packet is matched to a connection, the device confirms
+if the TCP sequence number is the expected one and proceeds to TLS handling
+(record delineation, decryption, authentication for each record in the packet).
+The device leaves the record framing unmodified, the stack takes care of record
+decapsulation. Device indicates successful handling of TLS offload in the
+per-packet context (descriptor) passed to the host.
 
 Upon reception of a TLS offloaded packet, the driver sets
 the :c:member:`decrypted` mark in :c:type:`struct sk_buff <sk_buff>`
@@ -439,7 +440,7 @@ by the driver:
  * ``rx_tls_resync_req_end`` - number of times the TLS async resync request
     properly ended with providing the HW tracked tcp-seq.
  * ``rx_tls_resync_req_skip`` - number of times the TLS async resync request
-    procedure was started by not properly ended.
+    procedure was started but not properly ended.
  * ``rx_tls_resync_res_ok`` - number of times the TLS resync response call to
     the driver was successfully handled.
  * ``rx_tls_resync_res_skip`` - number of times the TLS resync response call to
@@ -507,8 +508,8 @@ in packets as seen on the wire.
 Transport layer transparency
 ----------------------------
 
-The device should not modify any packet headers for the purpose
-of the simplifying TLS offload.
+For the purpose of simplifying TLS offload, the device should not modify any
+packet headers.
 
 The device should not depend on any packet headers beyond what is strictly
 necessary for TLS offload.