Merge tag 'i2c-for-6.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull more i2c updates from Wolfram Sang:
 "Andi was super busy the last weeks, so this pull requests contains one
  series (nomadik) and a number of smaller additions which were ready to
  go but nearly overlooked.

  New feature support:

   - Added support for frequencies up to 3.4 MHz on Nomadik I2C

   - DesignWare now accounts for bus capacitance and clock optimisation
     (declared as new parameters in the binding) to improve the
     calculation of signal rise and fall times (t_high and t_low)

  New Hardware support:

   - DWAPB I2C controller on FUJITSU-MONAKA (new ACPI HID)

   - Allwinner A523 (new compatible ID)

   - Mobileye EyeQ6H (new compatible ID)"

* tag 'i2c-for-6.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: transfer i2c-aspeed maintainership from Brendan to Ryan
  i2c: designware: determine HS tHIGH and tLOW based on HW parameters
  dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
  i2c: nomadik: support >=1MHz speed modes
  i2c: nomadik: fix BRCR computation
  i2c: nomadik: support Mobileye EyeQ6H I2C controller
  i2c: nomadik: switch from of_device_is_compatible() to of_match_device()
  dt-bindings: i2c: nomadik: support 400kHz < clock-frequency <= 3.4MHz
  dt-bindings: i2c: nomadik: add mobileye,eyeq6h-i2c bindings
  dt-bindings: i2c: mv64xxx: Add Allwinner A523 compatible string
  i2c: designware: Add ACPI HID for DWAPB I2C controller on FUJITSU-MONAKA
  i2c: qup: use generic device property accessors

3 files changed, 26 insertions, 6 deletions

diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
index 984fc1ed3ec6..c4efcef59133 100644
--- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
@@ -33,6 +33,7 @@ properties:
               - allwinner,sun50i-a100-i2c
               - allwinner,sun50i-h616-i2c
               - allwinner,sun50i-r329-i2c
+              - allwinner,sun55i-a523-i2c
           - const: allwinner,sun8i-v536-i2c
           - const: allwinner,sun6i-a31-i2c
       - const: marvell,mv64xxx-i2c
diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
index 60035a787e5c..e5d05263c45a 100644
--- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
@@ -97,6 +97,22 @@ properties:
       - const: tx
       - const: rx
 
+  snps,bus-capacitance-pf:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      This property indicates the bus capacitance in picofarads (pF).
+      This value is used to compute the tHIGH and tLOW periods for high speed
+      mode.
+    enum: [100, 400]
+    default: 100
+
+  snps,clk-freq-optimized:
+    description:
+      This property indicates whether the hardware reduce its clock frequency
+      by reducing the internal latency required to generate the high period and
+      low period of SCL line.
+    type: boolean
+
 unevaluatedProperties: false
 
 required:
@@ -121,6 +137,8 @@ examples:
       i2c-sda-hold-time-ns = <300>;
       i2c-sda-falling-time-ns = <300>;
       i2c-scl-falling-time-ns = <300>;
+      snps,bus-capacitance-pf = <400>;
+      snps,clk-freq-optimized;
     };
   - |
     i2c@2000 {
diff --git a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
index 44c54b162bb1..012402debfeb 100644
--- a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
@@ -22,6 +22,7 @@ select:
         enum:
           - st,nomadik-i2c
           - mobileye,eyeq5-i2c
+          - mobileye,eyeq6h-i2c
   required:
     - compatible
 
@@ -29,15 +30,15 @@ properties:
   compatible:
     oneOf:
       - items:
-          - const: st,nomadik-i2c
+          - enum:
+              - st,nomadik-i2c
+              - mobileye,eyeq5-i2c
+              - mobileye,eyeq6h-i2c
           - const: arm,primecell
       - items:
           - const: stericsson,db8500-i2c
           - const: st,nomadik-i2c
           - const: arm,primecell
-      - items:
-          - const: mobileye,eyeq5-i2c
-          - const: arm,primecell
 
   reg:
     maxItems: 1
@@ -54,7 +55,7 @@ properties:
       - items:
           - const: mclk
           - const: apb_pclk
-      # Clock name in DB8500 or EyeQ5
+      # Clock name in DB8500 or EyeQ
       - items:
           - const: i2cclk
           - const: apb_pclk
@@ -67,7 +68,7 @@ properties:
 
   clock-frequency:
     minimum: 1
-    maximum: 400000
+    maximum: 3400000
 
   mobileye,olb:
     $ref: /schemas/types.yaml#/definitions/phandle-array