Merge tag 'mfd-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull NFD updates from Lee Jones:
 "New Drivers:
   - Add support for the Cirrus Logic CS42L43 Audio CODEC

  Fix-ups:
   - Make use of specific printk() format tags for various optimisations
   - Kconfig / module modifications / tweaking
   - Simplify obtaining resources (memory, device data) using unified
     API helpers
   - Bunch of Device Tree additions, conversions and adaptions
   - Convert a bunch of Regmap configurations to use the Maple Tree
     cache
   - Ensure correct includes are present and remove some that are not
     required
   - Remove superfluous code
   - Reduce amount of cycles spent in critical sections
   - Omit the use of redundant casts and if relevant replace with better
     ones
   - Swap out raw_spin_{un}lock_irq{save,restore}() for
     spin_{un}lock_irq{save,restore}()

  Bug Fixes:
   - Repair theoretical deadlock situation
   - Fix some link-time dependencies
   - Use more appropriate datatype when casting"

* tag 'mfd-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (70 commits)
  mfd: mc13xxx: Simplify device data fetching in probe()
  mfd: rz-mtu3: Replace raw_spin_lock->spin_lock()
  mfd: rz-mtu3: Reduce critical sections
  mfd: mxs-lradc: Fix Wvoid-pointer-to-enum-cast warning
  mfd: wm31x: Fix Wvoid-pointer-to-enum-cast warning
  mfd: wm8994: Fix Wvoid-pointer-to-enum-cast warning
  mfd: tc3589: Fix Wvoid-pointer-to-enum-cast warning
  mfd: lp87565: Fix Wvoid-pointer-to-enum-cast warning
  mfd: hi6421-pmic: Fix Wvoid-pointer-to-enum-cast warning
  mfd: max77541: Fix Wvoid-pointer-to-enum-cast warning
  mfd: max14577: Fix Wvoid-pointer-to-enum-cast warning
  mfd: stmpe: Fix Wvoid-pointer-to-enum-cast warning
  mfd: rn5t618: Remove redundant of_match_ptr()
  mfd: lochnagar-i2c: Remove redundant of_match_ptr()
  mfd: stpmic1: Remove redundant of_match_ptr()
  mfd: act8945a: Remove redundant of_match_ptr()
  mfd: rsmu_spi: Remove redundant of_match_ptr()
  mfd: altera-a10sr: Remove redundant of_match_ptr()
  mfd: rsmu_i2c: Remove redundant of_match_ptr()
  mfd: tc3589x: Remove redundant of_match_ptr()
  ...

22 files changed, 403 insertions, 290 deletions

diff --git a/Documentation/devicetree/bindings/input/stmpe-keypad.txt b/Documentation/devicetree/bindings/input/stmpe-keypad.txt
deleted file mode 100644
index 12bb771d66d4..000000000000
--- a/Documentation/devicetree/bindings/input/stmpe-keypad.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* STMPE Keypad
-
-Required properties:
- - compatible               : "st,stmpe-keypad"
- - linux,keymap             : See ./matrix-keymap.txt
-
-Optional properties:
- - debounce-interval        : Debouncing interval time in milliseconds
- - st,scan-count            : Scanning cycles elapsed before key data is updated
- - st,no-autorepeat         : If specified device will not autorepeat
- - keypad,num-rows          : See ./matrix-keymap.txt
- - keypad,num-columns       : See ./matrix-keymap.txt
-
-Example:
-
-	stmpe_keypad {
-		compatible = "st,stmpe-keypad";
-
-		debounce-interval = <64>;
-		st,scan-count = <8>;
-		st,no-autorepeat;
-
-		linux,keymap = <0x205006b
-				0x4010074
-				0x3050072
-				0x1030004
-				0x502006a
-				0x500000a
-				0x5008b
-				0x706001c
-				0x405000b
-				0x6070003
-				0x3040067
-				0x303006c
-				0x60400e7
-				0x602009e
-				0x4020073
-				0x5050002
-				0x4030069
-				0x3020008>;
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
deleted file mode 100644
index 238b51555c04..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-STMPE Touchscreen
-----------------
-
-Required properties:
- - compatible: "st,stmpe-ts"
-
-Optional properties:
-- st,ave-ctrl		: Sample average control
-				0 -> 1 sample
-				1 -> 2 samples
-				2 -> 4 samples
-				3 -> 8 samples
-- st,touch-det-delay	: Touch detect interrupt delay (recommended is 3)
-				0 -> 10 us
-				1 -> 50 us
-				2 -> 100 us
-				3 -> 500 us
-				4 -> 1 ms
-				5 -> 5 ms
-				6 -> 10 ms
-				7 -> 50 ms
-- st,settling		: Panel driver settling time (recommended is 2)
-				0 -> 10 us
-				1 -> 100 us
-				2 -> 500 us
-				3 -> 1 ms
-				4 -> 5 ms
-				5 -> 10 ms
-				6 -> 50 ms
-				7 -> 100 ms
-- st,fraction-z		: Length of the fractional part in z (recommended is 7)
-			  (fraction-z ([0..7]) = Count of the fractional part)
-- st,i-drive		: current limit value of the touchscreen drivers
-				0 -> 20 mA (typical 35mA max)
-				1 -> 50 mA (typical 80 mA max)
-
-Optional properties common with MFD (deprecated):
- - st,sample-time	: ADC conversion time in number of clock.
-				0 -> 36 clocks
-				1 -> 44 clocks
-				2 -> 56 clocks
-				3 -> 64 clocks
-				4 -> 80 clocks (recommended)
-				5 -> 96 clocks
-				6 -> 124 clocks
- - st,mod-12b		: ADC Bit mode
-				0 -> 10bit ADC
-				1 -> 12bit ADC
- - st,ref-sel		: ADC reference source
-				0 -> internal
-				1 -> external
- - st,adc-freq		: ADC Clock speed
-				0 -> 1.625 MHz
-				1 -> 3.25 MHz
-				2 || 3 -> 6.5 MHz
-
-Node should be child node of stmpe node to which it belongs.
-
-Note that common ADC settings of stmpe_touchscreen (child) will take precedence
-over the settings done in MFD.
-
-Example:
-
-stmpe811@41 {
-	compatible = "st,stmpe811";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_touch_int>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x41>;
-	interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-	interrupt-parent = <&gpio4>;
-	interrupt-controller;
-	id = <0>;
-	blocks = <0x5>;
-	irq-trigger = <0x1>;
-	/* Common ADC settings */
-	/* 3.25 MHz ADC clock speed */
-	st,adc-freq = <1>;
-	/* 12-bit ADC */
-	st,mod-12b = <1>;
-	/* internal ADC reference */
-	st,ref-sel = <0>;
-	/* ADC converstion time: 80 clocks */
-	st,sample-time = <4>;
-
-	stmpe_touchscreen {
-		compatible = "st,stmpe-ts";
-		reg = <0>;
-		/* 8 sample average control */
-		st,ave-ctrl = <3>;
-		/* 5 ms touch detect interrupt delay */
-		st,touch-det-delay = <5>;
-		/* 1 ms panel driver settling time */
-		st,settling = <3>;
-		/* 7 length fractional part in z */
-		st,fraction-z = <7>;
-		/*
-		 * 50 mA typical 80 mA max touchscreen drivers
-		 * current limit value
-		 */
-		st,i-drive = <1>;
-	};
-	stmpe_adc {
-		compatible = "st,stmpe-adc";
-		st,norequest-mask = <0x0F>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
index cf94176fe1eb..8789e3639ff7 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
@@ -34,6 +34,9 @@ patternProperties:
           - allwinner,sun6i-a31-clock-reset
           - fixed-factor-clock
 
+    required:
+      - compatible
+
     allOf:
       - if:
           properties:
@@ -55,25 +58,17 @@ patternProperties:
             "#clock-cells":
               const: 0
 
-            # Already checked in the main schema
-            compatible: true
-
             clocks:
               maxItems: 2
 
             clock-output-names:
               maxItems: 1
 
-            phandle: true
-
           required:
             - "#clock-cells"
-            - compatible
             - clocks
             - clock-output-names
 
-          additionalProperties: false
-
       - if:
           properties:
             compatible:
@@ -85,25 +80,17 @@ patternProperties:
             "#clock-cells":
               const: 0
 
-            # Already checked in the main schema
-            compatible: true
-
             clocks:
               maxItems: 1
 
             clock-output-names:
               maxItems: 1
 
-            phandle: true
-
           required:
             - "#clock-cells"
-            - compatible
             - clocks
             - clock-output-names
 
-          additionalProperties: false
-
       - if:
           properties:
             compatible:
@@ -119,9 +106,6 @@ patternProperties:
                 offset of the bit controlling this particular gate in
                 the register.
 
-            # Already checked in the main schema
-            compatible: true
-
             clocks:
               maxItems: 1
 
@@ -129,16 +113,11 @@ patternProperties:
               minItems: 1
               maxItems: 32
 
-            phandle: true
-
           required:
             - "#clock-cells"
-            - compatible
             - clocks
             - clock-output-names
 
-          additionalProperties: false
-
       - if:
           properties:
             compatible:
@@ -150,9 +129,6 @@ patternProperties:
             "#clock-cells":
               const: 0
 
-            # Already checked in the main schema
-            compatible: true
-
             clocks:
               maxItems: 4
               description: >
@@ -162,16 +138,11 @@ patternProperties:
             clock-output-names:
               maxItems: 1
 
-            phandle: true
-
           required:
             - "#clock-cells"
-            - compatible
             - clocks
             - clock-output-names
 
-          additionalProperties: false
-
       - if:
           properties:
             compatible:
@@ -183,16 +154,8 @@ patternProperties:
             "#reset-cells":
               const: 1
 
-            # Already checked in the main schema
-            compatible: true
-
-            phandle: true
-
           required:
             - "#reset-cells"
-            - compatible
-
-          additionalProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
index 16c80a7eec49..e51f85519911 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
@@ -57,25 +57,17 @@ patternProperties:
             "#clock-cells":
               const: 0
 
-            # Already checked in the main schema
-            compatible: true
-
             clocks:
               maxItems: 1
 
             clock-output-names:
               maxItems: 1
 
-            phandle: true
-
           required:
             - "#clock-cells"
-            - compatible
             - clocks
             - clock-output-names
 
-          additionalProperties: false
-
       - if:
           properties:
             compatible:
@@ -91,9 +83,6 @@ patternProperties:
                 offset of the bit controlling this particular gate in
                 the register.
 
-            # Already checked in the main schema
-            compatible: true
-
             clocks:
               maxItems: 1
 
@@ -101,16 +90,11 @@ patternProperties:
               minItems: 1
               maxItems: 32
 
-            phandle: true
-
           required:
             - "#clock-cells"
-            - compatible
             - clocks
             - clock-output-names
 
-          additionalProperties: false
-
       - if:
           properties:
             compatible:
@@ -122,34 +106,8 @@ patternProperties:
             "#reset-cells":
               const: 1
 
-            # Already checked in the main schema
-            compatible: true
-
-            phandle: true
-
           required:
             - "#reset-cells"
-            - compatible
-
-          additionalProperties: false
-
-      - if:
-          properties:
-            compatible:
-              contains:
-                const: allwinner,sun8i-a23-codec-analog
-
-        then:
-          properties:
-            # Already checked in the main schema
-            compatible: true
-
-            phandle: true
-
-          required:
-            - compatible
-
-          additionalProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
index 9d837535637b..af692e8833a5 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
@@ -6,6 +6,7 @@ at boot time according to the device tree.
 
 Required properties:
 - compatible:		Should be "atmel,sama5d2-flexcom"
+			or "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"
 - reg:			Should be the offset/length value for Flexcom dedicated
 			I/O registers (without USART, TWI or SPI registers).
 - clocks:		Should be the Flexcom peripheral clock from PMC.
diff --git a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
index e8c525569f10..3c989d1760a2 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
@@ -6,6 +6,7 @@ Required properties:
 - compatible:		Should be one of the following:
 			"atmel,at91sam9260-gpbr", "syscon"
 			"microchip,sam9x60-gpbr", "syscon"
+			"microchip,sam9x7-gpbr", "microchip,sam9x60-gpbr", "syscon"
 - reg:			contains offset/length value of the GPBR memory
 			region.
 
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
index 5f8880cc757e..7de696eefaed 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
@@ -8,6 +8,7 @@ Required properties:
    "atmel,sama5d3-hlcdc"
    "atmel,sama5d4-hlcdc"
    "microchip,sam9x60-hlcdc"
+   "microchip,sam9x75-xlcdc"
  - reg: base address and size of the HLCDC device registers.
  - clock-names: the name of the 3 clocks requested by the HLCDC device.
    Should contain "periph_clk", "sys_clk" and "slow_clk".
diff --git a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
index 89d05c64fb01..6e5f83614e83 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
@@ -14,6 +14,7 @@ Required properties:
 			"atmel,at91sam9x5-matrix", "syscon"
 			"atmel,sama5d3-matrix", "syscon"
 			"microchip,sam9x60-matrix", "syscon"
+			"microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon"
 - reg:			Contains offset/length value of the Bus Matrix
 			memory region.
 
diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
index 5696d9fcb5dc..fd62add38a79 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
@@ -10,6 +10,7 @@ Required properties:
 			"atmel,sama5d3-smc", "syscon"
 			"atmel,sama5d2-smc", "syscon"
 			"microchip,sam9x60-smc", "syscon"
+			"microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon"
 - reg:			Contains offset/length value of the SMC memory
 			region.
 
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
index 9f9a14af875e..cb480162f967 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
@@ -35,7 +35,7 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
@@ -44,7 +44,7 @@ patternProperties:
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm6318-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm6318-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
index 803277dd2725..c14def1b2ad2 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
@@ -35,7 +35,7 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
@@ -44,7 +44,7 @@ patternProperties:
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm63268-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm63268-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
index b9a6856ce970..5f48209ed40f 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
@@ -35,7 +35,7 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
@@ -44,7 +44,7 @@ patternProperties:
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm6328-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm6328-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
index 4651fe4dde07..f1f4629565d9 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
@@ -35,7 +35,7 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
@@ -44,7 +44,7 @@ patternProperties:
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm6358-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm6358-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
index 0330b621fd38..4d594739b382 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
@@ -35,7 +35,7 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
@@ -44,7 +44,7 @@ patternProperties:
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm6362-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm6362-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
index 82d3e4415bda..aae83d432880 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
@@ -35,7 +35,7 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
@@ -44,7 +44,7 @@ patternProperties:
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm6368-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm6368-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
index 1b06a77ec798..9804d13de648 100644
--- a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
@@ -31,12 +31,17 @@ properties:
   charger:
     $ref: /schemas/power/supply/maxim,max77693.yaml
 
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
   led:
     $ref: /schemas/leds/maxim,max77693.yaml
 
   max77693-muic:
     type: object
     additionalProperties: false
+    deprecated: true
 
     properties:
       compatible:
@@ -45,6 +50,21 @@ properties:
     required:
       - compatible
 
+  muic:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: maxim,max77693-muic
+
+      connector:
+        $ref: /schemas/connector/usb-connector.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - compatible
+
   motor-driver:
     type: object
     additionalProperties: false
@@ -107,6 +127,38 @@ examples:
                 };
             };
 
+            muic {
+                compatible = "maxim,max77693-muic";
+
+                connector {
+                    compatible = "samsung,usb-connector-11pin",
+                                 "usb-b-connector";
+                    label = "micro-USB";
+                    type = "micro";
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            reg = <0>;
+
+                            muic_to_usb: endpoint {
+                                remote-endpoint = <&usb_to_muic>;
+                            };
+                        };
+
+                        port@3 {
+                            reg = <3>;
+
+                            muic_to_mhl: endpoint {
+                                remote-endpoint = <&mhl_to_muic>;
+                            };
+                        };
+                    };
+                };
+            };
+
             motor-driver {
                 compatible = "maxim,max77693-haptic";
                 haptic-supply = <&ldo26_reg>;
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index 8b9a2008a354..9f03436b1cdc 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -41,6 +41,7 @@ properties:
           - qcom,pm660
           - qcom,pm660l
           - qcom,pm7250b
+          - qcom,pm7550ba
           - qcom,pm7325
           - qcom,pm8004
           - qcom,pm8005
@@ -70,6 +71,8 @@ properties:
           - qcom,pm8994
           - qcom,pm8998
           - qcom,pma8084
+          - qcom,pmc8180
+          - qcom,pmc8180c
           - qcom,pmd9635
           - qcom,pmi632
           - qcom,pmi8950
@@ -88,6 +91,7 @@ properties:
           - qcom,pms405
           - qcom,pmx55
           - qcom,pmx65
+          - qcom,pmx75
           - qcom,smb2351
       - const: qcom,spmi-pmic
 
@@ -127,7 +131,7 @@ patternProperties:
 
   "^audio-codec@[0-9a-f]+$":
     type: object
-    additionalProperties: true # FIXME qcom,pm8916-wcd-analog-codec binding not converted yet
+    $ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml#
 
   "^charger@[0-9a-f]+$":
     type: object
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
index 7ab7b2c7f3e6..d783cc4e4e86 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
@@ -130,7 +130,6 @@ dependencies:
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    #include <dt-bindings/leds/common.h>
 
     i2c {
         #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mfd/st,stmpe.yaml b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml
new file mode 100644
index 000000000000..b77cc3f3075d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml
@@ -0,0 +1,297 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/st,stmpe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectonics Port Expander (STMPE)
+
+description: STMicroelectronics Port Expander (STMPE) is a series of slow
+  bus controllers for various expanded peripherals such as GPIO, keypad,
+  touchscreen, ADC, PWM or rotator. It can contain one or several different
+  peripherals connected to SPI or I2C.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,stmpe601
+      - st,stmpe801
+      - st,stmpe811
+      - st,stmpe1600
+      - st,stmpe1601
+      - st,stmpe2401
+      - st,stmpe2403
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vcc-supply: true
+
+  vio-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+  wakeup-source: true
+<