Merge tag 'mips_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - add support for TP-Link HC220 G5 v1

 - add support for Wifi/Bluetooth on CI20

 - rework Ralink clock and reset handling

 - cleanups and fixes

* tag 'mips_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (58 commits)
  MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000
  MIPS: Loongson64: DTS: Add RTC support to LS7A PCH
  MIPS: OCTEON: octeon-usb: cleanup divider calculation
  MIPS: OCTEON: octeon-usb: introduce dwc3_octeon_{read,write}q
  MIPS: OCTEON: octeon-usb: move gpio config to separate function
  MIPS: OCTEON: octeon-usb: use bitfields for shim register
  MIPS: OCTEON: octeon-usb: use bitfields for host config register
  MIPS: OCTEON: octeon-usb: use bitfields for control register
  MIPS: OCTEON: octeon-usb: add all register offsets
  mips: ralink: match all supported system controller compatible strings
  MIPS: dec: prom: Address -Warray-bounds warning
  MIPS: DTS: CI20: Raise VDDCORE voltage to 1.125 volts
  clk: ralink: mtmips: Fix uninitialized use of ret in mtmips_register_{fixed,factor}_clocks()
  mips: ralink: introduce commonly used remap node function
  mips: pci-mt7620: use dev_info() to log PCIe device detection result
  mips: pci-mt7620: do not print NFTS register value as error log
  MAINTAINERS: add Mediatek MTMIPS Clock maintainer
  mips: ralink: get cpu rate from new driver code
  mips: ralink: remove reset related code
  mips: ralink: mt7620: remove clock related code
  ...

48 files changed, 893 insertions, 1125 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d49d5fc40021..fc6fba925aea 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -45,6 +45,7 @@ config MIPS
 	select GENERIC_LIB_UCMPDI2
 	select GENERIC_SCHED_CLOCK if !CAVIUM_OCTEON_SOC
 	select GENERIC_SMP_IDLE_THREAD
+	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_TIME_VSYSCALL
 	select GUP_GET_PXX_LOW_HIGH if CPU_MIPS32 && PHYS_ADDR_T_64BIT
 	select HAS_IOPORT if !NO_IOPORT_MAP || ISA
@@ -80,7 +81,6 @@ config MIPS
 	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
-	select HAVE_PATA_PLATFORM
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
@@ -155,9 +155,11 @@ config MIPS_GENERIC_KERNEL
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_CPU_MIPS32_R5
 	select SYS_HAS_CPU_MIPS32_R6
 	select SYS_HAS_CPU_MIPS64_R1
 	select SYS_HAS_CPU_MIPS64_R2
+	select SYS_HAS_CPU_MIPS64_R5
 	select SYS_HAS_CPU_MIPS64_R6
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 69734120ada1..6ca81e1bd35c 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -14,6 +14,7 @@ config MIPS_DB1XXX
 	bool "Alchemy DB1XXX / PB1XXX boards"
 	select GPIOLIB
 	select HAVE_PCI
+	select HAVE_PATA_PLATFORM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 	help
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 239c4537484d..a141a699b790 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -67,14 +67,14 @@
 		};
 	};
 
-	eth0_power: fixedregulator@0 {
+	eth0_power: fixedregulator-0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "eth0_power";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
+		gpio = <&gpb 25 0>;
 		enable-active-high;
 	};
 
@@ -97,25 +97,64 @@
 		gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
 	};
 
-	wlan0_power: fixedregulator@1 {
+	bt_power: fixedregulator-1 {
 		compatible = "regulator-fixed";
 
-		regulator-name = "wlan0_power";
+		regulator-name = "bt_power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-settling-time-us = <1400>;
+
+		vin-supply = <&vcc_50>;
 
-		gpio = <&gpb 19 GPIO_ACTIVE_LOW>;
+		gpio = <&gpb 19 0>;
 		enable-active-high;
 	};
 
-	otg_power: fixedregulator@2 {
+	otg_power: fixedregulator-2 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "otg_power";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 
-		gpio = <&gpf 15 GPIO_ACTIVE_LOW>;
+		gpio = <&gpf 15 0>;
 		enable-active-high;
 	};
+
+	wifi_power: fixedregulator-4 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wifi_power";
+
+		/*
+		 * Technically it's 5V, the WiFi chip has its own internal
+		 * regulators; but the MMC/SD subsystem won't accept such a
+		 * value.
+		 */
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-settling-time-us = <150000>;
+
+		vin-supply = <&bt_power>;
+	};
+
+	vcc_33v: fixedregulator-5 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vcc_33v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpf 7 GPIO_ACTIVE_LOW>;
+
+		clocks = <&rtc_dev>;
+		clock-names = "ext_clock";
+	};
 };
 
 &ext {
@@ -129,10 +168,11 @@
 	 */
 	assigned-clocks = <&cgu JZ4780_CLK_OTGPHY>, <&cgu JZ4780_CLK_RTC>,
 			  <&cgu JZ4780_CLK_SSIPLL>, <&cgu JZ4780_CLK_SSI>,
-			  <&cgu JZ4780_CLK_HDMI>;
+			  <&cgu JZ4780_CLK_HDMI>, <&cgu JZ4780_CLK_MSCMUX>;
 	assigned-clock-parents = <0>, <&cgu JZ4780_CLK_RTCLK>,
 				 <&cgu JZ4780_CLK_MPLL>,
-				 <&cgu JZ4780_CLK_SSIPLL>;
+				 <&cgu JZ4780_CLK_SSIPLL>,
+				 <0>, <&cgu JZ4780_CLK_MPLL>;
 	assigned-clock-rates = <48000000>, <0>, <54000000>, <0>, <27000000>;
 };
 
@@ -160,24 +200,33 @@
 	pinctrl-0 = <&pins_mmc0>;
 
 	cd-gpios = <&gpf 20 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vcc_33v>;
+	vqmmc-supply = <&vcc_33v>;
 };
 
 &mmc1 {
 	status = "okay";
 
 	bus-width = <4>;
-	max-frequency = <50000000>;
+	max-frequency = <25000000>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	vmmc-supply = <&wifi_power>;
+	vqmmc-supply = <&wifi_io>;
 	non-removable;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pins_mmc1>;
 
-	brcmf: wifi@1 {
-/*		reg = <4>;*/
-		compatible = "brcm,bcm4330-fmac";
-		vcc-supply = <&wlan0_power>;
-		device-wakeup-gpios = <&gpd 9 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpf 7 GPIO_ACTIVE_LOW>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpd>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
 	};
 };
 
@@ -204,11 +253,20 @@
 
 	bluetooth {
 		compatible = "brcm,bcm4330-bt";
-		reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>;
-		vcc-supply = <&wlan0_power>;
+
+		vbat-supply = <&bt_power>;
+		vddio-supply = <&wifi_io>;
+
+		interrupt-parent = <&gpf>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "host-wakeup";
+
+		clocks = <&rtc_dev>;
+		clock-names = "lpo";
+
+		reset-gpios = <&gpf 8 GPIO_ACTIVE_LOW>;
 		device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>;
+		shutdown-gpios = <&gpf 4 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -237,59 +295,54 @@
 	act8600: act8600@5a {
 		compatible = "active-semi,act8600";
 		reg = <0x5a>;
-		status = "okay";
 
 		regulators {
-			vddcore: SUDCDC1 {
-				regulator-name = "DCDC_REG1";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
+			vddcore: DCDC1 {
+				regulator-min-microvolt = <1125000>;
+				regulator-max-microvolt = <1125000>;
+				vp1-supply = <&vcc_33v>;
 				regulator-always-on;
 			};
-			vddmem: SUDCDC2 {
-				regulator-name = "DCDC_REG2";
+			vddmem: DCDC2 {
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <1500000>;
+				vp2-supply = <&vcc_33v>;
 				regulator-always-on;
 			};
-			vcc_33: SUDCDC3 {
-				regulator-name = "DCDC_REG3";
+			vcc_33: DCDC3 {
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
+				vp3-supply = <&vcc_33v>;
 				regulator-always-on;
 			};
-			vcc_50: SUDCDC4 {
-				regulator-name = "SUDCDC_REG4";
+			vcc_50: SUDCDC_REG4 {
 				regulator-min-microvolt = <5000000>;
 				regulator-max-microvolt = <5000000>;
 				regulator-always-on;
 			};
-			vcc_25: LDO_REG5 {
-				regulator-name = "LDO_REG5";
+			vcc_25: LDO5 {
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <2500000>;
+				inl-supply = <&vcc_33v>;
 				regulator-always-on;
 			};
-			wifi_io: LDO_REG6 {
-				regulator-name = "LDO_REG6";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
+			wifi_io: LDO6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-settling-time-us = <150000>;
+				inl-supply = <&vcc_33v>;
 			};
-			vcc_28: LDO_REG7 {
-				regulator-name = "LDO_REG7";
+			cim_io_28: LDO7 {
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
+				inl-supply = <&vcc_33v>;
 			};
-			vcc_15: LDO_REG8 {
-				regulator-name = "LDO_REG8";
+			cim_io_15: LDO8 {
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
+				inl-supply = <&vcc_33v>;
 			};
 			vrtc_18: LDO_REG9 {
-				regulator-name = "LDO_REG9";
 				/* Despite the datasheet stating 3.3V
 				 * for REG9 and the driver expecting that,
 				 * REG9 outputs 1.8V.
@@ -303,7 +356,6 @@
 				regulator-always-on;
 			};
 			vcc_11: LDO_REG10 {
-				regulator-name = "LDO_REG10";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
@@ -363,7 +415,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ingenic,bch-controller = <&bch>;
+		ecc-engine = <&bch>;
 
 		ingenic,nemc-tAS = <10>;
 		ingenic,nemc-tAH = <5>;
@@ -429,8 +481,8 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pins_nemc_cs6>;
 
-		reg = <6 0 1   /* addr */
-		       6 2 1>; /* data */
+		reg = <6 0 1>, /* addr */
+		      <6 2 1>; /* data */
 
 		ingenic,nemc-tAS = <15>;
 		ingenic,nemc-tAH = <10>;
@@ -442,7 +494,7 @@
 		vcc-supply = <&eth0_power>;
 
 		interrupt-parent = <&gpe>;
-		interrupts = <19 4>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
 
 		nvmem-cells = <&eth0_addr>;
 		nvmem-cell-names = "mac-address";
diff --git a/arch/mips/boot/dts/ingenic/jz4725b.dtsi b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
index e9e48022f631..acbbe8c4664c 100644
--- a/arch/mips/boot/dts/ingenic/jz4725b.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
@@ -198,11 +198,8 @@
 
 		#sound-dai-cells = <0>;
 
-		clocks = <&cgu JZ4725B_CLK_AIC>,
-			 <&cgu JZ4725B_CLK_I2S>,
-			 <&cgu JZ4725B_CLK_EXT>,
-			 <&cgu JZ4725B_CLK_PLL_HALF>;
-		clock-names = "aic", "i2s", "ext", "pll half";
+		clocks = <&cgu JZ4725B_CLK_AIC>, <&cgu JZ4725B_CLK_I2S>;
+		clock-names = "aic", "i2s";
 
 		interrupt-parent = <&intc>;
 		interrupts = <10>;
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index 7f76cba03a08..bdd6f4d82ec9 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -192,11 +192,8 @@
 		interrupt-parent = <&intc>;
 		interrupts = <18>;
 
-		clocks = <&cgu JZ4740_CLK_AIC>,
-			 <&cgu JZ4740_CLK_I2S>,
-			 <&cgu JZ4740_CLK_EXT>,
-			 <&cgu JZ4740_CLK_PLL_HALF>;
-		clock-names = "aic", "i2s", "ext", "pll half";
+		clocks = <&cgu JZ4740_CLK_AIC>, <&cgu JZ4740_CLK_I2S>;
+		clock-names = "aic", "i2s";
 
 		dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
 		dma-names = "rx", "tx";
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index bda0a3a86ed5..9c0099919db7 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -238,9 +238,8 @@
 
 		#sound-dai-cells = <0>;
 
-		clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>,
-			 <&cgu JZ4770_CLK_EXT>, <&cgu JZ4770_CLK_PLL0>;
-		clock-names = "aic", "i2s", "ext", "pll half";
+		clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>;
+		clock-names = "aic", "i2s";
 
 		interrupt-parent = <&intc>;
 		interrupts = <34>;
diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts
index ba0218971572..24f987244a12 100644
--- a/arch/mips/boot/dts/ingenic/qi_lb60.dts
+++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts
@@ -27,7 +27,7 @@
 		stdout-path = &uart0;
 	};
 
-	vcc: regulator@0 {
+	vcc: regulator-0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc";
 
@@ -36,7 +36,7 @@
 		regulator-always-on;
 	};
 
-	mmc_power: regulator@1 {
+	mmc_power: regulator-1 {
 		compatible = "regulator-fixed";
 		regulator-name = "mmc_vcc";
 		gpio = <&gpd 2 0>;
@@ -45,7 +45,7 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	amp_supply: regulator@2 {
+	amp_supply: regulator-2 {
 		compatible = "regulator-fixed";
 		regulator-name = "amp_supply";
 		gpio = <&gpd 4 0>;
diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
index 42e69664efd9..cc264cfff826 100644
--- a/arch/mips/boot/dts/ingenic/x1000.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -417,4 +417,22 @@
 
 		status = "disabled";
 	};
+
+	aic: audio-controller@10020000 {
+		compatible = "ingenic,x1000-i2s";
+		reg = <0x10020000 0x38>;
+
+		#sound-dai-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <1>;
+
+		clocks = <&cgu X1000_CLK_AIC>,
+			 <&cgu X1000_CLK_I2S>;
+		clock-names = "aic", "i2s";
+
+		dmas = <&pdma X1000_DMA_I2S0_RX 0xffffffff>,
+			   <&pdma X1000_DMA_I2S0_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+	};
 };
diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index 8143a61111e3..f878f47e4501 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -97,6 +97,13 @@
 						<0x00000000>; /* int3 */
 		};
 
+		rtc0: rtc@1fe07800 {
+			compatible = "loongson,ls2k1000-rtc";
+			reg = <0 0x1fe07800 0 0x78>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+		};
+
 		uart0: serial@1fe00000 {
 			compatible = "ns16550a";
 			reg = <0 0x1fe00000 0 0x8>;
diff --git a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
index 2f45fce2cdc4..7c69e8245c2f 100644
--- a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
+++ b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
@@ -19,6 +19,13 @@
 			#interrupt-cells = <2>;
 		};
 
+		rtc0: rtc@100d0100 {
+			compatible = "loongson,ls7a-rtc";
+			reg = <0 0x100d0100 0 0x78>;
+			interrupt-parent = <&pic>;
+			interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		ls7a_uart0: serial@10080000 {
 			compatible = "ns16550a";
 			reg = <0 0x10080000 0 0x100>;
diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile
index 11732b8c8163..d27d7e8c700f 100644
--- a/arch/mips/boot/dts/ralink/Makefile
+++ b/arch/mips/boot/dts/ralink/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_DTB_VOCORE2)	+= vocore2.dtb
 
 dtb-$(CONFIG_SOC_MT7621) += \
 	mt7621-gnubee-gb-pc1.dtb \
-	mt7621-gnubee-gb-pc2.dtb
+	mt7621-gnubee-gb-pc2.dtb \
+	mt7621-tplink-hc220-g5-v1.dtb
 
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dts b/arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dts
new file mode 100644
index 000000000000..2d2eadc6b95f
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "tplink,hc220-g5-v1", "mediatek,mt7621-soc";
+	model = "TP-Link HC220 G5 v1";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "earlycon console=ttyS0,115200";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-reset {
+			label = "reset";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		key-wps {
+			label = "wps";
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-fault {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_FAULT;
+			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		port@1 {
+			status = "okay";
+			label = "lan1";
+		};
+
+		port@2 {
+			status = "okay";
+			label = "wan";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi
index 45bf96a3d17a..45a15e005cc4 100644
--- a/arch/mips/boot/dts/ralink/mt7628a.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi
@@ -51,85 +51,85 @@
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <0x1>;
 
-			pinmux_gpio_gpio: pinmux_gpio_gpio {
+			pinmux_gpio_gpio: gpio-gpio-pins {
 				pinctrl-single,bits = <0x0 0x0 0x3>;
 			};
 
-			pinmux_spi_cs1_cs: pinmux_spi_cs1_cs {
+			pinmux_spi_cs1_cs: spi-cs1-cs-pins {
 				pinctrl-single,bits = <0x0 0x0 0x30>;
 			};
 
-			pinmux_i2s_gpio: pinmux_i2s_gpio {
+			pinmux_i2s_gpio: i2s-gpio-pins {
 				pinctrl-single,bits = <0x0 0x40 0xc0>;
 			};
 
-			pinmux_uart0_uart: pinmux_uart0_uart0 {
+			pinmux_uart0_uart: uart0-uart0-pins {
 				pinctrl-single,bits = <0x0 0x0 0x300>;
 			};
 
-			pinmux_sdmode_sdxc: pinmux_sdmode_sdxc {
+			pinmux_sdmode_sdxc: sdmode-sdxc-pins {
 				pinctrl-single,bits = <0x0 0x0 0xc00>;
 			};
 
-			pinmux_sdmode_gpio: pinmux_sdmode_gpio {
+			pinmux_sdmode_gpio: sdmode-gpio-pins {
 				pinctrl-single,bits = <0x0 0x400 0xc00>;
 			};
 
-			pinmux_spi_spi: pinmux_spi_spi {
+			pinmux_spi_spi: spi-spi-pins {
 				pinctrl-single,bits = <0x0 0x0 0x1000>;
 			};
 
-			pinmux_refclk_gpio: pinmux_refclk_gpio {
+			pinmux_refclk_gpio: refclk-gpio-pins {
 				pinctrl-single,bits = <0x0 0x40000 0x40000>;
 			};
 
-			pinmux_i2c_i2c: pinmux_i2c_i2c {
+			pinmux_i2c_i2c: i2c-i2c-pins {
 				pinctrl-single,bits = <0x0 0x0 0x300000>;
 			};
 
-			pinmux_uart1_uart: pinmux_uart1_uart1 {
+			pinmux_uart1_uart: uart1-uart1-pins {
 				pinctrl-single,bits = <0x0 0x0 0x3000000>;
 			};
 
-			pinmux_uart2_uart: pinmux_uart2_uart {
+			pinmux_uart2_uart: uart2-uart-pins {
 				pinctrl-single,bits = <0x0 0x0 0xc000000>;
 			};
 
-			pinmux_pwm0_pwm: pinmux_pwm0_pwm {
+			pinmux_pwm0_pwm: pwm0-pwm-pins {
 				pinctrl-single,bits = <0x0 0x0 0x30000000>;
 			};
 
-			pinmux_pwm0_gpio: pinmux_pwm0_gpio {
+			pinmux_pwm0_gpio: pwm0-gpio-pins {