Merge tag 'mips_6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - add support for Realtek RTL9302C

 - add support for Mobileye EyeQ6H

 - add support for Mobileye EyeQ OLB system controller

 - improve r4k clocksource

 - add mode for emulating ieee754 NAN2008

 - rework for BMIPS CBR address handling

 - fixes for Loongson 2K1000

 - defconfig updates

 - cleanups and fixes

* tag 'mips_6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (58 commits)
  MIPS: config: Add ip30_defconfig
  MIPS: config: lemote2f: Regenerate defconfig
  MIPS: config: generic: Add board-litex
  MIPS: config: Enable MSA and virtualization for MIPS64R6
  MIPS: Fix fallback march for SB1
  mips: dts: realtek: Add RTL9302C board
  mips: generic: add fdt fixup for Realtek reference board
  mips: select REALTEK_OTTO_TIMER for Realtek platforms
  dt-bindings: interrupt-controller: realtek,rtl-intc: Add rtl9300-intc
  dt-bindings: mips: realtek: Add rtl930x-soc compatible
  dt-bindings: vendor-prefixes: Add Cameo Communications
  mips: dts: realtek: add device_type property to cpu node
  mips: dts: realtek: use "serial" instead of "uart" in node name
  MIPS: Implement ieee754 NAN2008 emulation mode
  MIPS: lantiq: improve USB initialization
  MIPS: GIC: Generate redirect block accessors
  MIPS: CPS: Add a couple of multi-cluster utility functions
  MIPS: Octeron: remove source file executable bit
  MAINTAINERS: Mobileye: add OLB drivers and dt-bindings
  MIPS: mobileye: eyeq5: add OLB system-controller node
  ...

72 files changed, 1702 insertions, 390 deletions

diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 5c145b67d3bf..bca37ddf974b 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -8,6 +8,7 @@ platform-$(CONFIG_BCM47XX)		+= bcm47xx/
 platform-$(CONFIG_BCM63XX)		+= bcm63xx/
 platform-$(CONFIG_BMIPS_GENERIC)	+= bmips/
 platform-$(CONFIG_CAVIUM_OCTEON_SOC)	+= cavium-octeon/
+platform-$(CONFIG_EYEQ)			+= mobileye/
 platform-$(CONFIG_MIPS_COBALT)		+= cobalt/
 platform-$(CONFIG_MACH_DECSTATION)	+= dec/
 platform-$(CONFIG_MIPS_GENERIC)		+= generic/
@@ -17,7 +18,6 @@ platform-$(CONFIG_MACH_LOONGSON2EF)	+= loongson2ef/
 platform-$(CONFIG_MACH_LOONGSON32)	+= loongson32/
 platform-$(CONFIG_MACH_LOONGSON64)	+= loongson64/
 platform-$(CONFIG_MIPS_MALTA)		+= mti-malta/
-platform-$(CONFIG_MACH_EYEQ5)		+= mobileye/
 platform-$(CONFIG_MACH_NINTENDO64)	+= n64/
 platform-$(CONFIG_PIC32MZDA)		+= pic32/
 platform-$(CONFIG_RALINK)		+= ralink/
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index f1aa1bf11166..28af3d9e6bc0 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -30,7 +30,7 @@ config MIPS
 	select BUILDTIME_TABLE_SORT
 	select CLONE_BACKWARDS
 	select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1)
-	select CPU_PM if CPU_IDLE
+	select CPU_PM if CPU_IDLE || SUSPEND
 	select GENERIC_ATOMIC64 if !64BIT
 	select GENERIC_CMOS_UPDATE
 	select GENERIC_CPU_AUTOPROBE
@@ -575,8 +575,8 @@ config MACH_PIC32
 	  Microchip PIC32 is a family of general-purpose 32 bit MIPS core
 	  microcontrollers.
 
-config MACH_EYEQ5
-	bool "Mobileye EyeQ5 SoC"
+config EYEQ
+	bool "Mobileye EyeQ SoC"
 	select MACH_GENERIC_CORE
 	select ARM_AMBA
 	select PHYSICAL_START_BOOL
@@ -615,7 +615,7 @@ config MACH_EYEQ5
 	select USB_UHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
 	select USE_OF
 	help
-	  Select this to build a kernel supporting EyeQ5 SoC from Mobileye.
+	  Select this to build a kernel supporting EyeQ SoC from Mobileye.
 
 	bool
 
@@ -667,6 +667,7 @@ config MACH_REALTEK_RTL
 	select BOOT_RAW
 	select PINCTRL
 	select USE_OF
+	select REALTEK_OTTO_TIMER
 
 config SGI_IP22
 	bool "SGI IP22 (Indy/Indigo2)"
@@ -1021,6 +1022,7 @@ source "arch/mips/generic/Kconfig"
 source "arch/mips/ingenic/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lantiq/Kconfig"
+source "arch/mips/mobileye/Kconfig"
 source "arch/mips/pic32/Kconfig"
 source "arch/mips/ralink/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
@@ -1083,6 +1085,7 @@ config CSRC_IOASIC
 
 config CSRC_R4K
 	select CLOCKSOURCE_WATCHDOG if CPU_FREQ
+	select HAVE_UNSTABLE_SCHED_CLOCK if SMP && 64BIT
 	bool
 
 config CSRC_SB1250
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 80aecba24892..5785a3d5ccfb 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -170,7 +170,7 @@ cflags-$(CONFIG_CPU_NEVADA)	+= $(call cc-option,-march=rm5200,-march=mips4) \
 			-Wa,--trap
 cflags-$(CONFIG_CPU_RM7000)	+= $(call cc-option,-march=rm7000,-march=mips4) \
 			-Wa,--trap
-cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-march=sb1,-march=mips64r1) \
+cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-march=sb1,-march=mips64) \
 			-Wa,--trap
 cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-mno-mdmx)
 cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-mno-mips3d)
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index d4ab34b3b404..da74cae6b43a 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -409,8 +409,8 @@ static void __init alchemy_setup_macs(int ctype)
 	if (alchemy_get_macs(ctype) < 1)
 		return;
 
-	macres = kmemdup(au1xxx_eth0_resources[ctype],
-			 sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+	macres = kmemdup_array(au1xxx_eth0_resources[ctype], MAC_RES_COUNT,
+			       sizeof(*macres), GFP_KERNEL);
 	if (!macres) {
 		printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
 		return;
@@ -430,8 +430,8 @@ static void __init alchemy_setup_macs(int ctype)
 	if (alchemy_get_macs(ctype) < 2)
 		return;
 
-	macres = kmemdup(au1xxx_eth1_resources[ctype],
-			 sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+	macres = kmemdup_array(au1xxx_eth1_resources[ctype], MAC_RES_COUNT,
+			       sizeof(*macres), GFP_KERNEL);
 	if (!macres) {
 		printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
 		return;
diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c
index 7b9f91db227f..6984cd5169b5 100644
--- a/arch/mips/alchemy/devboards/db1000.c
+++ b/arch/mips/alchemy/devboards/db1000.c
@@ -10,15 +10,16 @@
 #include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/leds.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/pm.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
-#include <linux/spi/ads7846.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/gpio-au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>
@@ -374,22 +375,20 @@ static struct platform_device db1100_mmc1_dev = {
 
 /******************************************************************************/
 
-static struct ads7846_platform_data db1100_touch_pd = {
-	.model		= 7846,
-	.vref_mv	= 3300,
+static const struct software_node db1100_alchemy2_gpiochip = {
+	.name	= "alchemy-gpio2",
 };
 
-static struct spi_gpio_platform_data db1100_spictl_pd = {
-	.num_chipselect = 1,
+static const struct property_entry db1100_ads7846_properties[] = {
+	PROPERTY_ENTRY_U16("ti,vref_min", 3300),
+	PROPERTY_ENTRY_GPIO("pendown-gpios",
+			    &db1100_alchemy2_gpiochip, 21, GPIO_ACTIVE_LOW),
+	{ }
 };
 
-static struct gpiod_lookup_table db1100_touch_gpio_table = {
-	.dev_id = "spi0.0",
-	.table = {
-		GPIO_LOOKUP("alchemy-gpio2", 21,
-			    "pendown", GPIO_ACTIVE_LOW),
-		{ }
-	},
+static const struct software_node db1100_ads7846_swnode = {
+	.name		= "ads7846",
+	.properties	= db1100_ads7846_properties,
 };
 
 static struct spi_board_info db1100_spi_info[] __initdata = {
@@ -400,37 +399,37 @@ static struct spi_board_info db1100_spi_info[] __initdata = {
 		.chip_select	 = 0,
 		.mode		 = 0,
 		.irq		 = AU1100_GPIO21_INT,
-		.platform_data	 = &db1100_touch_pd,
+		.swnode		 = &db1100_ads7846_swnode,
 	},
 };
 
-static struct platform_device db1100_spi_dev = {
-	.name		= "spi_gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &db1100_spictl_pd,
-		.dma_mask		= &au1xxx_all_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
+static const struct spi_gpio_platform_data db1100_spictl_pd __initconst = {
+	.num_chipselect = 1,
 };
 
 /*
  * Alchemy GPIO 2 has its base at 200 so the GPIO lines
  * 207 thru 210 are GPIOs at offset 7 thru 10 at this chip.
  */
-static struct gpiod_lookup_table db1100_spi_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("alchemy-gpio2", 9,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("alchemy-gpio2", 8,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("alchemy-gpio2", 7,
-			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("alchemy-gpio2", 10,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
+static const struct property_entry db1100_spi_dev_properties[] __initconst = {
+	PROPERTY_ENTRY_GPIO("miso-gpios",
+			    &db1100_alchemy2_gpiochip, 7, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("mosi-gpios",
+			    &db1100_alchemy2_gpiochip, 8, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("sck-gpios",
+			    &db1100_alchemy2_gpiochip, 9, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("cs-gpios",
+			    &db1100_alchemy2_gpiochip, 10, GPIO_ACTIVE_HIGH),
+	{ }
+};
+
+static const struct platform_device_info db1100_spi_dev_info __initconst = {
+	.name		= "spi_gpio",
+	.id		= 0,
+	.data		= &db1100_spictl_pd,
+	.size_data	= sizeof(db1100_spictl_pd),
+        .dma_mask	= DMA_BIT_MASK(32),
+	.properties	= db1100_spi_dev_properties,
 };
 
 static struct platform_device *db1x00_devs[] = {
@@ -452,8 +451,10 @@ int __init db1000_dev_setup(void)
 {
 	int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
 	int c0, c1, d0, d1, s0, s1, flashsize = 32,  twosocks = 1;
+	int err;
 	unsigned long pfc;
 	struct clk *c, *p;
+	struct platform_device *spi_dev;
 
 	if (board == BCSR_WHOAMI_DB1500) {
 		c0 = AU1500_GPIO2_INT;
@@ -480,7 +481,7 @@ int __init db1000_dev_setup(void)
 		pfc |= (1 << 0);	/* SSI0 pins as GPIOs */
 		alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
 
-		gpiod_add_lookup_table(&db1100_touch_gpio_table);
+		software_node_register(&db1100_alchemy2_gpiochip);
 		spi_register_board_info(db1100_spi_info,
 					ARRAY_SIZE(db1100_spi_info));
 
@@ -497,8 +498,11 @@ int __init db1000_dev_setup(void)
 			clk_put(p);
 
 		platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs));
-		gpiod_add_lookup_table(&db1100_spi_gpiod_table);
-		platform_device_register(&db1100_spi_dev);
+
+		spi_dev = platform_device_register_full(&db1100_spi_dev_info);
+		err = PTR_ERR_OR_ZERO(spi_dev);
+		if (err)
+			pr_err("failed to register SPI controller: %d\n", err);
 	} else if (board == BCSR_WHOAMI_DB1000) {
 		c0 = AU1000_GPIO2_INT;
 		c1 = AU1000_GPIO5_INT;
diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c
index 58fb7c2dc3b8..66e3ee2b04e6 100644
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -32,6 +32,7 @@
 #include <linux/ssb/ssb_driver_chipcommon.h>
 #include <linux/ssb/ssb_regs.h>
 #include <linux/smp.h>
+#include <asm/bmips.h>
 #include <asm/bootinfo.h>
 #include <bcm47xx.h>
 #include <bcm47xx_board.h>
@@ -110,6 +111,8 @@ static __init void prom_init_mem(void)
 
 void __init prom_init(void)
 {
+	/* Cache CBR addr before CPU/DMA setup */
+	bmips_cbr_addr = BMIPS_GET_CBR();
 	prom_init_mem();
 	setup_8250_early_printk_port(CKSEG1ADDR(BCM47XX_SERIAL_ADDR), 0, 0);
 }
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 94bf839576c1..247be207f293 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -37,6 +37,7 @@
 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_embedded.h>
 #include <linux/bcma/bcma_soc.h>
+#include <asm/bmips.h>
 #include <asm/bootinfo.h>
 #include <asm/idle.h>
 #include <asm/prom.h>
@@ -45,6 +46,13 @@
 #include <bcm47xx.h>
 #include <bcm47xx_board.h>
 
+/*
+ * CBR addr doesn't change and we can cache it.
+ * For broken SoC/Bootloader CBR addr might also be provided via DT
+ * with "brcm,bmips-cbr-reg" in the "cpus" node.
+ */
+void __iomem *bmips_cbr_addr __read_mostly;
+
 union bcm47xx_bus bcm47xx_bus;
 EXPORT_SYMBOL(bcm47xx_bus);
 
diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c
index c3a2ea62c5c3..f21dd168171a 100644
--- a/arch/mips/bcm63xx/prom.c
+++ b/arch/mips/bcm63xx/prom.c
@@ -22,6 +22,9 @@ void __init prom_init(void)
 {
 	u32 reg, mask;
 
+	/* Cache CBR addr before CPU/DMA setup */
+	bmips_cbr_addr = BMIPS_GET_CBR();
+
 	bcm63xx_cpu_init();
 
 	/* stop any running watchdog */
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
index c13ddb544a23..81529084bc75 100644
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -12,6 +12,7 @@
 #include <linux/memblock.h>
 #include <linux/ioport.h>
 #include <linux/pm.h>
+#include <asm/bmips.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
 #include <asm/reboot.h>
@@ -22,6 +23,13 @@
 #include <bcm63xx_io.h>
 #include <bcm63xx_gpio.h>
 
+/*
+ * CBR addr doesn't change and we can cache it.
+ * For broken SoC/Bootloader CBR addr might also be provided via DT
+ * with "brcm,bmips-cbr-reg" in the "cpus" node.
+ */
+void __iomem *bmips_cbr_addr __read_mostly;
+
 void bcm63xx_machine_halt(void)
 {
 	pr_info("System halted\n");
diff --git a/arch/mips/bmips/dma.c b/arch/mips/bmips/dma.c
index 3779e7855bd7..2bc9c0d4402f 100644
--- a/arch/mips/bmips/dma.c
+++ b/arch/mips/bmips/dma.c
@@ -9,7 +9,7 @@ bool bmips_rac_flush_disable;
 
 void arch_sync_dma_for_cpu_all(void)
 {
-	void __iomem *cbr = BMIPS_GET_CBR();
+	void __iomem *cbr = bmips_cbr_addr;
 	u32 cfg;
 
 	if (boot_cpu_type() != CPU_BMIPS3300 &&
diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c
index 66a8ba19c287..2572fd49a6e9 100644
--- a/arch/mips/bmips/setup.c
+++ b/arch/mips/bmips/setup.c
@@ -34,6 +34,13 @@
 #define REG_BCM6328_OTP		((void __iomem *)CKSEG1ADDR(0x1000062c))
 #define BCM6328_TP1_DISABLED	BIT(9)
 
+/*
+ * CBR addr doesn't change and we can cache it.
+ * For broken SoC/Bootloader CBR addr might also be provided via DT
+ * with "brcm,bmips-cbr-reg" in the "cpus" node.
+ */
+void __iomem *bmips_cbr_addr __read_mostly;
+
 extern bool bmips_rac_flush_disable;
 
 static const unsigned long kbase = VMLINUX_LOAD_ADDRESS & 0xfff00000;
@@ -111,7 +118,7 @@ static void bcm6358_quirks(void)
 	 * because the bootloader is not initializing it properly.
 	 */
 	bmips_rac_flush_disable = !!(read_c0_brcm_cmt_local() & (1 << 31)) ||
-				  !!BMIPS_GET_CBR();
+				  !!bmips_cbr_addr;
 }
 
 static void bcm6368_quirks(void)
@@ -144,6 +151,8 @@ static void __init bmips_init_cfe(void)
 
 void __init prom_init(void)
 {
+	/* Cache CBR addr before CPU/DMA setup */
+	bmips_cbr_addr = BMIPS_GET_CBR();
 	bmips_init_cfe();
 	bmips_cpu_setup();
 	register_bmips_smp_ops();
@@ -203,13 +212,35 @@ void __init plat_mem_setup(void)
 void __init device_tree_init(void)
 {
 	struct device_node *np;
+	u32 addr;
 
 	unflatten_and_copy_device_tree();
 
 	/* Disable SMP boot unless both CPUs are listed in DT and !disabled */
 	np = of_find_node_by_name(NULL, "cpus");
-	if (np && of_get_available_child_count(np) <= 1)
+	if (!np)
+		return;
+
+	if (of_get_available_child_count(np) <= 1)
 		bmips_smp_enabled = 0;
+
+	/* Check if DT provide a CBR address */
+	if (of_property_read_u32(np, "brcm,bmips-cbr-reg", &addr))
+		goto exit;
+
+	/* Make sure CBR address is outside DRAM window */
+	if (add