Add USB VBUS regulator for RZ/G2L

Merge series from Biju Das <biju.das.jz@bp.renesas.com>:

As per RZ/G2L HW manual, VBUS enable can be controlled by the VBOUT bit of
the VBUS Control Register(VBENCTL) register in the USBPHY Control. But
this IP is in the Reset block.

Reset driver exposes this register as regmap and instantiate the USB VBUS
regulator device. Consumers(phy device) can use regulator APIs to control
VBUS as controlling is done in the atomic context using a new API which
is added for the purpose.

1 files changed, 30 insertions, 25 deletions

diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c
index 9c364e92cb82..e8f45a7fded4 100644
--- a/drivers/dma/ioat/init.c
+++ b/drivers/dma/ioat/init.c
@@ -534,18 +534,6 @@ err_out:
 	return err;
 }
 
-static int ioat_register(struct ioatdma_device *ioat_dma)
-{
-	int err = dma_async_device_register(&ioat_dma->dma_dev);
-
-	if (err) {
-		ioat_disable_interrupts(ioat_dma);
-		dma_pool_destroy(ioat_dma->completion_pool);
-	}
-
-	return err;
-}
-
 static void ioat_dma_remove(struct ioatdma_device *ioat_dma)
 {
 	struct dma_device *dma = &ioat_dma->dma_dev;
@@ -1181,9 +1169,9 @@ static int ioat3_dma_probe(struct ioatdma_device *ioat_dma, int dca)
 		       ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
 	}
 
-	err = ioat_register(ioat_dma);
+	err = dma_async_device_register(&ioat_dma->dma_dev);
 	if (err)
-		return err;
+		goto err_disable_interrupts;
 
 	ioat_kobject_add(ioat_dma, &ioat_ktype);
 
@@ -1192,20 +1180,29 @@ static int ioat3_dma_probe(struct ioatdma_device *ioat_dma, int dca)
 
 	/* disable relaxed ordering */
 	err = pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &val16);
-	if (err)
-		return pcibios_err_to_errno(err);
+	if (err) {
+		err = pcibios_err_to_errno(err);
+		goto err_disable_interrupts;
+	}
 
 	/* clear relaxed ordering enable */
 	val16 &= ~PCI_EXP_DEVCTL_RELAX_EN;
 	err = pcie_capability_write_word(pdev, PCI_EXP_DEVCTL, val16);
-	if (err)
-		return pcibios_err_to_errno(err);
+	if (err) {
+		err = pcibios_err_to_errno(err);
+		goto err_disable_interrupts;
+	}
 
 	if (ioat_dma->cap & IOAT_CAP_DPS)
 		writeb(ioat_pending_level + 1,
 		       ioat_dma->reg_base + IOAT_PREFETCH_LIMIT_OFFSET);
 
 	return 0;
+
+err_disable_interrupts:
+	ioat_disable_interrupts(ioat_dma);
+	dma_pool_destroy(ioat_dma->completion_pool);
+	return err;
 }
 
 static void ioat_shutdown(struct pci_dev *pdev)
@@ -1350,6 +1347,8 @@ static int ioat_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	void __iomem * const *iomap;
 	struct device *dev = &pdev->dev;
 	struct ioatdma_device *device;
+	unsigned int i;
+	u8 version;
 	int err;
 
 	err = pcim_enable_device(pdev);
@@ -1363,6 +1362,10 @@ static int ioat_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (!iomap)
 		return -ENOMEM;
 
+	version = readb(iomap[IOAT_MMIO_BAR] + IOAT_VER_OFFSET);
+	if (version < IOAT_VER_3_0)
+		return -ENODEV;
+
 	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
 	if (err)
 		return err;
@@ -1373,17 +1376,18 @@ static int ioat_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_set_master(pdev);
 	pci_set_drvdata(pdev, device);
 
-	device->version = readb(device->reg_base + IOAT_VER_OFFSET);
+	device->version = version;
 	if (device->version >= IOAT_VER_3_4)
 		ioat_dca_enabled = 0;
-	if (device->version >= IOAT_VER_3_0) {
-		if (is_skx_ioat(pdev))
-			device->version = IOAT_VER_3_2;
-		err = ioat3_dma_probe(device, ioat_dca_enabled);
-	} else
-		return -ENODEV;
 
+	if (is_skx_ioat(pdev))
+		device->version = IOAT_VER_3_2;
+
+	err = ioat3_dma_probe(device, ioat_dca_enabled);
 	if (err) {
+		for (i = 0; i < IOAT_MAX_CHANS; i++)
+			kfree(device->idx[i]);
+		kfree(device);
 		dev_err(dev, "Intel(R) I/OAT DMA Engine init failed\n");
 		return -ENODEV;
 	}
@@ -1445,6 +1449,7 @@ module_init(ioat_init_module);
 static void __exit ioat_exit_module(void)
 {
 	pci_unregister_driver(&ioat_pci_driver);
+	kmem_cache_destroy(ioat_sed_cache);
 	kmem_cache_destroy(ioat_cache);
 }
 module_exit(ioat_exit_module);