Merge tag 'drm-intel-next-2023-06-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 feature pull #2 for v6.5:

Features and functionality:
- Meteorlake PM demand (Vinod, Mika)
- Switch to dedicated workqueues to stop using flush_scheduled_work() (Luca)

Refactoring and cleanups:
- Move display runtime init under display/ (Matt)
- Async flip error message clarifications (Arun)

Fixes:
- Remove 10bit gamma on desktop gen3 parts, they don't support it (Ville)
- Fix driver probe error handling if driver creation fails (Matt)
- Fix all -Wunused-but-set-variable warnings, and enable it for i915 (Jani)
- Stop using edid_blob_ptr (Jani)
- Fix log level for "CDS interlane align done" (Khaled)
- Fix an unnecessary include prefix (Matt)

Merges:
- Backmerge drm-next to sync with drm-intel-gt-next (Jani)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87o7lnpxz2.fsf@intel.com

60 files changed, 1397 insertions, 389 deletions

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 1c9ed4c52760..789dce9e2608 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -19,7 +19,7 @@ subdir-ccflags-y += -Wno-type-limits
 subdir-ccflags-y += -Wno-missing-field-initializers
 subdir-ccflags-y += -Wno-sign-compare
 subdir-ccflags-y += -Wno-shift-negative-value
-subdir-ccflags-y += $(call cc-disable-warning, unused-but-set-variable)
+subdir-ccflags-y += $(call cc-option, -Wunused-but-set-variable)
 subdir-ccflags-y += $(call cc-disable-warning, frame-address)
 subdir-ccflags-$(CONFIG_DRM_I915_WERROR) += -Werror
 
@@ -269,6 +269,7 @@ i915-y += \
 	display/intel_pch_display.o \
 	display/intel_pch_refclk.o \
 	display/intel_plane_initial.o \
+	display/intel_pmdemand.o \
 	display/intel_psr.o \
 	display/intel_quirks.o \
 	display/intel_sprite.o \
diff --git a/drivers/gpu/drm/i915/display/i9xx_plane.c b/drivers/gpu/drm/i915/display/i9xx_plane.c
index 616654adbfb8..b10488324457 100644
--- a/drivers/gpu/drm/i915/display/i9xx_plane.c
+++ b/drivers/gpu/drm/i915/display/i9xx_plane.c
@@ -1033,10 +1033,13 @@ i9xx_get_initial_plane_config(struct intel_crtc *crtc,
 					       DSPLINOFF(i9xx_plane));
 		base = intel_de_read(dev_priv, DSPSURF(i9xx_plane)) & DISP_ADDR_MASK;
 	} else {
+		offset = 0;
 		base = intel_de_read(dev_priv, DSPADDR(i9xx_plane));
 	}
 	plane_config->base = base;
 
+	drm_WARN_ON(&dev_priv->drm, offset != 0);
+
 	val = intel_de_read(dev_priv, PIPESRC(pipe));
 	fb->width = REG_FIELD_GET(PIPESRC_WIDTH_MASK, val) + 1;
 	fb->height = REG_FIELD_GET(PIPESRC_HEIGHT_MASK, val) + 1;
diff --git a/drivers/gpu/drm/i915/display/intel_atomic_plane.c b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
index 4125ee07a271..7d9578ebae55 100644
--- a/drivers/gpu/drm/i915/display/intel_atomic_plane.c
+++ b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
@@ -722,7 +722,7 @@ skl_next_plane_to_commit(struct intel_atomic_state *state,
 {
 	struct intel_crtc_state *crtc_state =
 		intel_atomic_get_new_crtc_state(state, crtc);
-	struct intel_plane_state *plane_state;
+	struct intel_plane_state __maybe_unused *plane_state;
 	struct intel_plane *plane;
 	int i;
 
diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c
index 597d5816ad1b..bef96db62c80 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.c
+++ b/drivers/gpu/drm/i915/display/intel_bw.c
@@ -182,7 +182,7 @@ static int mtl_read_qgv_point_info(struct drm_i915_private *dev_priv,
 	val2 = intel_uncore_read(&dev_priv->uncore,
 				 MTL_MEM_SS_INFO_QGV_POINT_HIGH(point));
 	dclk = REG_FIELD_GET(MTL_DCLK_MASK, val);
-	sp->dclk = DIV_ROUND_UP((16667 * dclk), 1000);
+	sp->dclk = DIV_ROUND_CLOSEST(16667 * dclk, 1000);
 	sp->t_rp = REG_FIELD_GET(MTL_TRP_MASK, val);
 	sp->t_rcd = REG_FIELD_GET(MTL_TRCD_MASK, val);
 
@@ -379,7 +379,7 @@ static const struct intel_sa_info mtl_sa_info = {
 	.deburst = 32,
 	.deprogbwlimit = 38, /* GB/s */
 	.displayrtids = 256,
-	.derating = 20,
+	.derating = 10,
 };
 
 static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel_sa_info *sa)
@@ -534,10 +534,14 @@ static int tgl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel
 
 			bi->deratedbw[j] = min(maxdebw,
 					       bw * (100 - sa->derating) / 100);
+			bi->peakbw[j] = DIV_ROUND_CLOSEST(sp->dclk *
+							  num_channels *
+							  qi.channel_width, 8);
 
 			drm_dbg_kms(&dev_priv->drm,
-				    "BW%d / QGV %d: num_planes=%d deratedbw=%u\n",
-				    i, j, bi->num_planes, bi->deratedbw[j]);
+				    "BW%d / QGV %d: num_planes=%d deratedbw=%u peakbw: %u\n",
+				    i, j, bi->num_planes, bi->deratedbw[j],
+				    bi->peakbw[j]);
 		}
 
 		for (j = 0; j < qi.num_psf_points; j++) {
@@ -589,8 +593,8 @@ static void dg2_get_bw_info(struct drm_i915_private *i915)
 	i915->display.sagv.status = I915_SAGV_NOT_CONTROLLED;
 }
 
-static unsigned int icl_max_bw(struct drm_i915_private *dev_priv,
-			       int num_planes, int qgv_point)
+static unsigned int icl_max_bw_index(struct drm_i915_private *dev_priv,
+				     int num_planes, int qgv_point)
 {
 	int i;
 
@@ -611,14 +615,14 @@ static unsigned int icl_max_bw(struct drm_i915_private *dev_priv,
 			return UINT_MAX;
 
 		if (num_planes >= bi->num_planes)
-			return bi->deratedbw[qgv_point];
+			return i;
 	}
 
-	return 0;
+	return UINT_MAX;
 }
 
-static unsigned int tgl_max_bw(struct drm_i915_private *dev_priv,
-			       int num_planes, int qgv_point)
+static unsigned int tgl_max_bw_index(struct drm_i915_private *dev_priv,
+				     int num_planes, int qgv_point)
 {
 	int i;
 
@@ -639,10 +643,10 @@ static unsigned int tgl_max_bw(struct drm_i915_private *dev_priv,
 			return UINT_MAX;
 
 		if (num_planes <= bi->num_planes)
-			return bi->deratedbw[qgv_point];
+			return i;
 	}
 
-	return dev_priv->display.bw.max[0].deratedbw[qgv_point];
+	return 0;
 }
 
 static unsigned int adl_psf_bw(struct drm_i915_private *dev_priv,
@@ -799,6 +803,210 @@ intel_atomic_get_bw_state(struct intel_atomic_state *state)
 	return to_intel_bw_state(bw_state);
 }
 
+static int mtl_find_qgv_points(struct drm_i915_private *i915,
+			       unsigned int data_rate,
+			       unsigned int num_active_planes,
+			       struct intel_bw_state *new_bw_state)
+{
+	unsigned int best_rate = UINT_MAX;
+	unsigned int num_qgv_points = i915->display.bw.max[0].num_qgv_points;
+	unsigned int qgv_peak_bw  = 0;
+	int i;
+	int ret;
+
+	ret = intel_atomic_lock_global_state(&new_bw_state->base);
+	if (ret)
+		return ret;
+
+	/*
+	 * If SAGV cannot be enabled, disable the pcode SAGV by passing all 1's
+	 * for qgv peak bw in PM Demand request. So assign UINT_MAX if SAGV is
+	 * not enabled. PM Demand code will clamp the value for the register
+	 */
+	if (!intel_can_enable_sagv(i915, new_bw_state)) {
+		new_bw_state->qgv_point_peakbw = U16_MAX;
+		drm_dbg_kms(&i915->drm, "No SAGV, use UINT_MAX as peak bw.");
+		return 0;
+	}
+
+	/*
+	 * Find the best QGV point by comparing the data_rate with max data rate
+	 * offered per plane group
+	 */
+	for (i = 0; i < num_qgv_points; i++) {
+		unsigned int bw_index =
+			tgl_max_bw_index(i915, num_active_planes, i);
+		unsigned int max_data_rate;
+
+		if (bw_index >= ARRAY_SIZE(i915->display.bw.max))
+			continue;
+
+		max_data_rate = i915->display.bw.max[bw_index].deratedbw[i];
+
+		if (max_data_rate < data_rate)
+			continue;
+
+		if (max_data_rate - data_rate < best_rate) {
+			best_rate = max_data_rate - data_rate;
+			qgv_peak_bw = i915->display.bw.max[bw_index].peakbw[i];
+		}
+
+		drm_dbg_kms(&i915->drm, "QGV point %d: max bw %d required %d qgv_peak_bw: %d\n",
+			    i, max_data_rate, data_rate, qgv_peak_bw);
+	}
+
+	drm_dbg_kms(&i915->drm, "Matching peaks QGV bw: %d for required data rate: %d\n",
+		    qgv_peak_bw, data_rate);
+
+	/*
+	 * The display configuration cannot be supported if no QGV point
+	 * satisfying the required data rate is found
+	 */
+	if (qgv_peak_bw == 0) {
+		drm_dbg_kms(&i915->drm, "No QGV points for bw %d for display configuration(%d active planes).\n",
+			    data_rate, num_active_planes);
+		return -EINVAL;
+	}
+
+	/* MTL PM DEMAND expects QGV BW parameter in multiples of 100 mbps */
+	new_bw_state->qgv_point_peakbw = DIV_ROUND_CLOSEST(qgv_peak_bw, 100);
+
+	return 0;
+}
+
+static int icl_find_qgv_points(struct drm_i915_private *i915,
+			       unsigned int data_rate,
+			       unsigned int num_active_planes,
+			       const struct intel_bw_state *old_bw_state,
+			       struct intel_bw_state *new_bw_state)
+{
+	unsigned int max_bw_point = 0;
+	unsigned int max_bw = 0;
+	unsigned int num_psf_gv_points = i915->display.bw.max[0].num_psf_gv_points;
+	unsigned int num_qgv_points = i915->display.bw.max[0].num_qgv_points;
+	u16 psf_points = 0;
+	u16 qgv_points = 0;
+	int i;
+	int ret;
+
+	ret = intel_atomic_lock_global_state(&new_bw_state->base);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < num_qgv_points; i++) {
+		unsigned int idx;
+		unsigned int max_data_rate;
+
+		if (DISPLAY_VER(i915) > 11)
+			idx = tgl_max_bw_index(i915, num_active_planes, i);
+		else
+			idx = icl_max_bw_index(i915, num_active_planes, i);
+
+		if (idx >= ARRAY_SIZE(i915->display.bw.max))
+			continue;
+
+		max_data_rate = i915->display.bw.max[idx].deratedbw[i];
+
+		/*
+		 * We need to know which qgv point gives us
+		 * maximum bandwidth in order to disable SAGV
+		 * if we find that we exceed SAGV block time
+		 * with watermarks. By that moment we already
+		 * have those, as it is calculated earlier in
+		 * intel_atomic_check,
+		 */
+		if (max_data_rate > max_bw) {
+			max_bw_point = i;
+			max_bw = max_data_rate;
+		}
+		if (max_data_rate >= data_rate)
+			qgv_points |= BIT(i);
+
+		drm_dbg_kms(&i915->drm, "QGV point %d: max bw %d required %d\n",
+			    i, max_data_rate, data_rate);
+	}
+
+	for (i = 0; i < num_psf_gv_points; i++) {
+		unsigned int max_data_rate = adl_psf_bw(i915, i);
+
+		if (max_data_rate >= data_rate)
+			psf_points |= BIT(i);
+
+		drm_dbg_kms(&i915->drm, "PSF GV point %d: max bw %d"
+			    " required %d\n",
+			    i, max_data_rate, data_rate);
+	}
+
+	/*
+	 * BSpec states that we always should have at least one allowed point
+	 * left, so if we couldn't - simply reject the configuration for obvious
+	 * reasons.
+	 */
+	if (qgv_points == 0) {
+		drm_dbg_kms(&i915->drm, "No QGV points provide sufficient memory"
+			    " bandwidth %d for display configuration(%d active planes).\n",
+			    data_rate, num_active_planes);
+		return -EINVAL;
+	}
+
+	if (num_psf_gv_points > 0 && psf_points == 0) {
+		drm_dbg_kms(&i915->drm, "No PSF GV points provide sufficient memory"
+			    " bandwidth %d for display configuration(%d active planes).\n",
+			    data_rate, num_active_planes);
+		return -EINVAL;
+	}
+
+	/*
+	 * Leave only single point with highest bandwidth, if
+	 * we can't enable SAGV due to the increased memory latency it may
+	 * cause.
+	 */
+	if (!intel_can_enable_sagv(i915, new_bw_state)) {
+		qgv_points = BIT(max_bw_point);
+		drm_dbg_kms(&i915->drm, "No SAGV, using single QGV point %d\n",
+			    max_bw_point);
+	}
+
+	/*
+	 * We store the ones which need to be masked as that is what PCode
+	 * actually accepts as a parameter.
+	 */
+	new_bw_state->qgv_points_mask =
+		~(ICL_PCODE_REQ_QGV_PT(qgv_points) |
+		  ADLS_PCODE_REQ_PSF_PT(psf_points)) &
+		icl_qgv_points_mask(i915);
+
+	/*
+	 * If the actual mask had changed we need to make sure that
+	 * the commits are serialized(in case this is a nomodeset, nonblocking)
+	 */
+	if (new_bw_state->qgv_points_mask != old_bw_state->qgv_points_mask) {
+		ret = intel_atomic_serialize_global_state(&new_bw_state->base);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int intel_bw_check_qgv_points(struct drm_i915_private *i915,
+				     const struct intel_bw_state *old_bw_state,
+				     struct intel_bw_state *new_bw_state)
+{
+	unsigned int data_rate = intel_bw_data_rate(i915, new_bw_state);
+	unsigned int num_active_planes =
+			intel_bw_num_active_planes(i915, new_bw_state);
+
+	data_rate = DIV_ROUND_UP(data_rate, 1000);
+
+	if (DISPLAY_VER(i915) >= 14)
+		return mtl_find_qgv_points(i915, data_rate, num_active_planes,
+					   new_bw_state);
+	else
+		return icl_find_qgv_points(i915, data_rate, num_active_planes,
+					   old_bw_state, new_bw_state);
+}
+
 static bool intel_bw_state_changed(struct drm_i915_private *i915,
 				   const struct intel_bw_state *old_bw_state,
 				   const struct intel_bw_state *new_bw_state)
@@ -1045,20 +1253,14 @@ static int intel_bw_check_data_rate(struct intel_atomic_state *state, bool *chan
 
 int intel_bw_atomic_check(struct intel_atomic_state *state)
 {
-	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
-	const struct intel_bw_state *old_bw_state;
-	struct intel_bw_state *new_bw_state;
-	unsigned int data_rate;
-	unsigned int num_active_planes;
-	int i, ret;
-	u16 qgv_points = 0, psf_points = 0;
-	unsigned int max_bw_point = 0, max_bw = 0;
-	unsigned int num_qgv_points = dev_priv->display.bw.max[0].num_qgv_points;
-	unsigned int num_psf_gv_points = dev_priv->display.bw.max[0].num_psf_gv_points;
 	bool changed = false;
+	struct drm_i915_private *i915 = to_i915(state->base.dev);
+	struct intel_bw_state *new_bw_state;
+	const struct intel_bw_state *old_bw_state;
+	int ret;
 
 	/* FIXME earlier gens need some checks too */
-	if (DISPLAY_VER(dev_priv) < 11)
+	if (DISPLAY_VER(i915) < 11)
 		return 0;
 
 	ret = intel_bw_check_data_rate(state, &changed);
@@ -1069,8 +1271,8 @@ int intel_bw_atomic_check(struct intel_atomic_state *state)
 	new_bw_state = intel_atomic_get_new_bw_state(state);
 
 	if (new_bw_state &&
-	    intel_can_enable_sagv(dev_priv, old_bw_state) !=
-	    intel_can_enable_sagv(dev_priv, new_bw_state))
+	    intel_can_enable_sagv(i915, old_bw_state) !=
+	    intel_can_enable_sagv(i915, new_bw_state))
 		changed = true;
 
 	/*
@@ -1080,101 +1282,10 @@ int intel_bw_atomic_check(struct intel_atomic_state *state)
 	if (!changed)
 		return 0;
 
-	ret = intel_atomic_lock_global_state(&new_bw_state->base);
+	ret = intel_bw_check_qgv_points(i915, old_bw_state, new_bw_state);
 	if (ret)
 		return ret;
 
-	data_rate = intel_bw_data_rate(dev_priv, new_bw_state);
-	data_rate = DIV_ROUND_UP(data_rate, 1000);
-
-	num_active_planes = intel_bw_num_active_planes(dev_priv, new_bw_state);
-
-	for (i = 0; i < num_qgv_points; i++) {
-		unsigned int max_data_rate;
-
-		if (DISPLAY_VER(dev_priv) > 11)
-			max_data_rate = tgl_max_bw(dev_priv, num_active_planes, i);
-		else
-			max_data_rate = icl_max_bw(dev_priv, num_active_planes, i);
-		/*
-		 * We need to know which qgv point gives us
-		 * maximum bandwidth in order to disable SAGV
-		 * if we find that we exceed SAGV block time
-		 * with watermarks. By that moment we already
-		 * have those, as it is calculated earlier in
-		 * intel_atomic_check,
-		 */
-		if (max_data_rate > max_bw) {
-			max_bw_point = i;
-			max_bw = max_data_rate;
-		}
-		if (max_data_rate >= data_rate)
-			qgv_points |= BIT(i);
-
-		drm_dbg_kms(&dev_priv->drm, "QGV point %d: max bw %d required %d\n",
-			    i, max_data_rate, data_rate);
-	}
-
-	for (i = 0; i < num_psf_gv_points; i++) {
-		unsigned int max_data_rate = adl_psf_bw(dev_priv, i);
-
-		if (max_data_rate >= data_rate)
-			psf_points |= BIT(i);
-
-		drm_dbg_kms(&dev_priv->drm, "PSF GV point %d: max bw %d"
-			    " required %d\n",
-			    i, max_data_rate, data_rate);
-	}
-
-	/*
-	 * BSpec states that we always should have at least one allowed point
-	 * left, so if we couldn't - simply reject the configuration for obvious
-	 * reasons.
-	 */
-	if (qgv_points == 0) {
-		drm_dbg_kms(&dev_priv->drm, "No QGV points provide sufficient memory"
-			    " bandwidth %d for display configuration(%d active planes).\n",
-			    data_rate, num_active_planes);
-		return -EINVAL;
-	}
-
-	if (num_psf_gv_points > 0 && psf_points == 0) {
-		drm_dbg_kms(&dev_priv->drm, "No PSF GV points provide sufficient memory"
-			    " bandwidth %d for display configuration(%d active planes).\n",
-			    data_rate, num_active_planes);
-		return -EINVAL;
-	}
-
-	/*
-	 * Leave only single point with highest bandwidth, if
-	 * we can't enable SAGV due to the increased memory latency it may
-	 * cause.
-	 */
-	if (!intel_can_enable_sagv(dev_priv, new_bw_state)) {
-		qgv_points = BIT(max_bw_point);
-		drm_dbg_kms(&dev_priv->drm, "No SAGV, using single QGV point %d\n",
-			    max_bw_point);
-	}
-
-	/*
-	 * We store the ones which need to be masked as that is what PCode
-	 * actually accepts as a parameter.
-	 */
-	new_bw_state->qgv_points_mask =
-		~(ICL_PCODE_REQ_QGV_PT(qgv_points) |
-		  ADLS_PCODE_REQ_PSF_PT(psf_points)) &
-		icl_qgv_points_mask(dev_priv);
-
-	/*
-	 * If the actual mask had changed we need to make sure that
-	 * the commits are serialized(in case this is a nomodeset, nonblocking)
-	 */
-	if (new_bw_state->qgv_points_mask != old_bw_state->qgv_points_mask) {
-		ret = intel_atomic_serialize_global_state(&new_bw_state->base);
-		if (ret)
-			return ret;
-	}
-
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/i915/display/intel_bw.h b/drivers/gpu/drm/i915/display/intel_bw.h
index f20292143745..59cb4fc5db76 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.h
+++ b/drivers/gpu/drm/i915/display/intel_bw.h
@@ -35,6 +35,12 @@ struct intel_bw_state {
 	u8 active_pipes;
 
 	/*
+	 * From MTL onwards, to lock a QGV point, punit expects the peak BW of
+	 * the selected QGV point as the parameter in multiples of 100MB/s
+	 */
+	u16 qgv_point_peakbw;
+
+	/*
 	 * Current QGV points mask, which restricts
 	 * some particular SAGV states, not to confuse
 	 * with pipe_sagv_mask.
diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
index 1a5268e3d0a3..4207863b7b2a 100644
--- a/drivers/gpu/drm/i915/display/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
@@ -2959,7 +2959,7 @@ int intel_cdclk_atomic_check(struct intel_atomic_state *state,
 {
 	const struct intel_cdclk_state *old_cdclk_state;
 	const struct intel_cdclk_state *new_cdclk_state;
-	struct intel_plane_state *plane_s