Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (83 commits)
  mmc: fix compile error when CONFIG_BLOCK is not enabled
  mmc: core: Cleanup eMMC4.5 conditionals
  mmc: omap_hsmmc: if multiblock reads are broken, disable them
  mmc: core: add workaround for controllers with broken multiblock reads
  mmc: core: Prevent too long response times for suspend
  mmc: recognise SDIO cards with SDIO_CCCR_REV 3.00
  mmc: sd: Handle SD3.0 cards not supporting UHS-I bus speed mode
  mmc: core: support HPI send command
  mmc: core: Add cache control for eMMC4.5 device
  mmc: core: Modify the timeout value for writing power class
  mmc: core: new discard feature support at eMMC v4.5
  mmc: core: mmc sanitize feature support for v4.5
  mmc: dw_mmc: modify DATA register offset
  mmc: sdhci-pci: add flag for devices that can support runtime PM
  mmc: omap_hsmmc: ensure pbias configuration is always done
  mmc: core: Add Power Off Notify Feature eMMC 4.5
  mmc: sdhci-s3c: fix potential NULL dereference
  mmc: replace printk with appropriate display macro
  mmc: core: Add default timeout value for CMD6
  mmc: sdhci-pci: add runtime pm support
  ...

39 files changed, 1800 insertions, 707 deletions

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 8c87096531e9..87d5067ba629 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -130,13 +130,13 @@ config MMC_SDHCI_CNS3XXX
 	  If unsure, say N.
 
 config MMC_SDHCI_ESDHC_IMX
-	tristate "SDHCI platform support for the Freescale eSDHC i.MX controller"
-	depends on ARCH_MX25 || ARCH_MX35 || ARCH_MX5
+	tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
+	depends on ARCH_MXC
 	depends on MMC_SDHCI_PLTFM
 	select MMC_SDHCI_IO_ACCESSORS
 	help
-	  This selects the Freescale eSDHC controller support on the platform
-	  bus, found on platforms like mx35/51.
+	  This selects the Freescale eSDHC/uSDHC controller support
+	  found on i.MX25, i.MX35 i.MX5x and i.MX6x.
 
 	  If you have a controller with this interface, say Y or M here.
 
@@ -326,11 +326,11 @@ config MMC_MSM
 	  support for SDIO devices.
 
 config MMC_MXC
-	tristate "Freescale i.MX2/3 Multimedia Card Interface support"
-	depends on MACH_MX21 || MACH_MX27 || ARCH_MX31
+	tristate "Freescale i.MX21/27/31 Multimedia Card Interface support"
+	depends on ARCH_MXC
 	help
-	  This selects the Freescale i.MX2/3 Multimedia card Interface.
-	  If you have a i.MX platform with a Multimedia Card slot,
+	  This selects the Freescale i.MX21, i.MX27 and i.MX31 Multimedia card
+	  Interface. If you have a i.MX platform with a Multimedia Card slot,
 	  say Y or M here.
 
 	  If unsure, say N.
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index a4aa3af86fed..a8b4d2aa18e5 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -869,7 +869,11 @@ static irqreturn_t at91_mci_irq(int irq, void *devid)
 static irqreturn_t at91_mmc_det_irq(int irq, void *_host)
 {
 	struct at91mci_host *host = _host;
-	int present = !gpio_get_value(irq_to_gpio(irq));
+	int present;
+
+	/* entering this ISR means that we have configured det_pin:
+	 * we can use its value in board structure */
+	present = !gpio_get_value(host->board->det_pin);
 
 	/*
 	 * we expect this irq on both insert and remove,
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index fc8a0fe7c5c5..000b3ad0f5ca 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -17,112 +17,126 @@
 #define __DRIVERS_MMC_ATMEL_MCI_H__
 
 /* MCI Register Definitions */
-#define MCI_CR			0x0000	/* Control */
-# define MCI_CR_MCIEN		(  1 <<  0)	/* MCI Enable */
-# define MCI_CR_MCIDIS		(  1 <<  1)	/* MCI Disable */
-# define MCI_CR_PWSEN		(  1 <<  2)	/* Power Save Enable */
-# define MCI_CR_PWSDIS		(  1 <<  3)	/* Power Save Disable */
-# define MCI_CR_SWRST		(  1 <<  7)	/* Software Reset */
-#define MCI_MR			0x0004	/* Mode */
-# define MCI_MR_CLKDIV(x)	((x) <<  0)	/* Clock Divider */
-# define MCI_MR_PWSDIV(x)	((x) <<  8)	/* Power Saving Divider */
-# define MCI_MR_RDPROOF		(  1 << 11)	/* Read Proof */
-# define MCI_MR_WRPROOF		(  1 << 12)	/* Write Proof */
-# define MCI_MR_PDCFBYTE	(  1 << 13)	/* Force Byte Transfer */
-# define MCI_MR_PDCPADV		(  1 << 14)	/* Padding Value */
-# define MCI_MR_PDCMODE		(  1 << 15)	/* PDC-oriented Mode */
-#define MCI_DTOR		0x0008	/* Data Timeout */
-# define MCI_DTOCYC(x)		((x) <<  0)	/* Data Timeout Cycles */
-# define MCI_DTOMUL(x)		((x) <<  4)	/* Data Timeout Multiplier */
-#define MCI_SDCR		0x000c	/* SD Card / SDIO */
-# define MCI_SDCSEL_SLOT_A	(  0 <<  0)	/* Select SD slot A */
-# define MCI_SDCSEL_SLOT_B	(  1 <<  0)	/* Select SD slot A */
-# define MCI_SDCSEL_MASK	(  3 <<  0)
-# define MCI_SDCBUS_1BIT	(  0 <<  6)	/* 1-bit data bus */
-# define MCI_SDCBUS_4BIT	(  2 <<  6)	/* 4-bit data bus */
-# define MCI_SDCBUS_8BIT	(  3 <<  6)	/* 8-bit data bus[2] */
-# define MCI_SDCBUS_MASK	(  3 <<  6)
-#define MCI_ARGR		0x0010	/* Command Argument */
-#define MCI_CMDR		0x0014	/* Command */
-# define MCI_CMDR_CMDNB(x)	((x) <<  0)	/* Command Opcode */
-# define MCI_CMDR_RSPTYP_NONE	(  0 <<  6)	/* No response */
-# define MCI_CMDR_RSPTYP_48BIT	(  1 <<  6)	/* 48-bit response */
-# define MCI_CMDR_RSPTYP_136BIT	(  2 <<  6)	/* 136-bit response */
-# define MCI_CMDR_SPCMD_INIT	(  1 <<  8)	/* Initialization command */
-# define MCI_CMDR_SPCMD_SYNC	(  2 <<  8)	/* Synchronized command */
-# define MCI_CMDR_SPCMD_INT	(  4 <<  8)	/* Interrupt command */
-# define MCI_CMDR_SPCMD_INTRESP	(  5 <<  8)	/* Interrupt response */
-# define MCI_CMDR_OPDCMD	(  1 << 11)	/* Open Drain */
-# define MCI_CMDR_MAXLAT_5CYC	(  0 << 12)	/* Max latency 5 cycles */
-# define MCI_CMDR_MAXLAT_64CYC	(  1 << 12)	/* Max latency 64 cycles */
-# define MCI_CMDR_START_XFER	(  1 << 16)	/* Start data transfer */
-# define MCI_CMDR_STOP_XFER	(  2 << 16)	/* Stop data transfer */
-# define MCI_CMDR_TRDIR_WRITE	(  0 << 18)	/* Write data */
-# define MCI_CMDR_TRDIR_READ	(  1 << 18)	/* Read data */
-# define MCI_CMDR_BLOCK		(  0 << 19)	/* Single-block transfer */
-# define MCI_CMDR_MULTI_BLOCK	(  1 << 19)	/* Multi-block transfer */
-# define MCI_CMDR_STREAM	(  2 << 19)	/* MMC Stream transfer */
-# define MCI_CMDR_SDIO_BYTE	(  4 << 19)	/* SDIO Byte transfer */
-# define MCI_CMDR_SDIO_BLOCK	(  5 << 19)	/* SDIO Block transfer */
-# define MCI_CMDR_SDIO_SUSPEND	(  1 << 24)	/* SDIO Suspend Command */
-# define MCI_CMDR_SDIO_RESUME	(  2 << 24)	/* SDIO Resume Command */
-#define MCI_BLKR		0x0018	/* Block */
-# define MCI_BCNT(x)		((x) <<  0)	/* Data Block Count */
-# define MCI_BLKLEN(x)		((x) << 16)	/* Data Block Length */
-#define MCI_CSTOR		0x001c	/* Completion Signal Timeout[2] */
-# define MCI_CSTOCYC(x)		((x) <<  0)	/* CST cycles */
-# define MCI_CSTOMUL(x)		((x) <<  4)	/* CST multiplier */
-#define MCI_RSPR		0x0020	/* Response 0 */
-#define MCI_RSPR1		0x0024	/* Response 1 */
-#define MCI_RSPR2		0x0028	/* Response 2 */
-#define MCI_RSPR3		0x002c	/* Response 3 */
-#define MCI_RDR			0x0030	/* Receive Data */
-#define MCI_TDR			0x0034	/* Transmit Data */
-#define MCI_SR			0x0040	/* Status */
-#define MCI_IER			0x0044	/* Interrupt Enable */
-#define MCI_IDR			0x0048	/* Interrupt Disable */
-#define MCI_IMR			0x004c	/* Interrupt Mask */
-# define MCI_CMDRDY		(  1 <<   0)	/* Command Ready */
-# define MCI_RXRDY		(  1 <<   1)	/* Receiver Ready */
-# define MCI_TXRDY		(  1 <<   2)	/* Transmitter Ready */
-# define MCI_BLKE		(  1 <<   3)	/* Data Block Ended */
-# define MCI_DTIP		(  1 <<   4)	/* Data Transfer In Progress */
-# define MCI_NOTBUSY		(  1 <<   5)	/* Data Not Busy */
-# define MCI_SDIOIRQA		(  1 <<   8)	/* SDIO IRQ in slot A */
-# define MCI_SDIOIRQB		(  1 <<   9)	/* SDIO IRQ in slot B */
-# define MCI_RINDE		(  1 <<  16)	/* Response Index Error */
-# define MCI_RDIRE		(  1 <<  17)	/* Response Direction Error */
-# define MCI_RCRCE		(  1 <<  18)	/* Response CRC Error */
-# define MCI_RENDE		(  1 <<  19)	/* Response End Bit Error */
-# define MCI_RTOE		(  1 <<  20)	/* Response Time-Out Error */
-# define MCI_DCRCE		(  1 <<  21)	/* Data CRC Error */
-# define MCI_DTOE		(  1 <<  22)	/* Data Time-Out Error */
-# define MCI_OVRE		(  1 <<  30)	/* RX Overrun Error */
-# define MCI_UNRE		(  1 <<  31)	/* TX Underrun Error */
-#define MCI_DMA			0x0050	/* DMA Configuration[2] */
-# define MCI_DMA_OFFSET(x)	((x) <<  0)	/* DMA Write Buffer Offset */
-# define MCI_DMA_CHKSIZE(x)	((x) <<  4)	/* DMA Channel Read and Write Chunk Size */
-# define MCI_DMAEN		(  1 <<  8)	/* DMA Hardware Handshaking Enable */
-#define MCI_CFG			0x0054	/* Configuration[2] */
-# define MCI_CFG_FIFOMODE_1DATA	(  1 <<  0)	/* MCI Internal FIFO control mode */
-# define MCI_CFG_FERRCTRL_COR	(  1 <<  4)	/* Flow Error flag reset control mode */
-# define MCI_CFG_HSMODE		(  1 <<  8)	/* High Speed Mode */
-# define MCI_CFG_LSYNC		(  1 << 12)	/* Synchronize on the last block */
-#define MCI_WPMR		0x00e4	/* Write Protection Mode[2] */
-# define MCI_WP_EN		(  1 <<  0)	/* WP Enable */
-# define MCI_WP_KEY		(0x4d4349 << 8)	/* WP Key */
-#define MCI_WPSR		0x00e8	/* Write Protection Status[2] */
-# define MCI_GET_WP_VS(x)	((x) & 0x0f)
-# define MCI_GET_WP_VSRC(x)	(((x) >> 8) & 0xffff)
-#define MCI_FIFO_APERTURE	0x0200	/* FIFO Aperture[2] */
+#define ATMCI_CR			0x0000	/* Control */
+# define ATMCI_CR_MCIEN			(  1 <<  0)	/* MCI Enable */
+# define ATMCI_CR_MCIDIS		(  1 <<  1)	/* MCI Disable */
+# define ATMCI_CR_PWSEN			(  1 <<  2)	/* Power Save Enable */
+# define ATMCI_CR_PWSDIS		(  1 <<  3)	/* Power Save Disable */
+# define ATMCI_CR_SWRST			(  1 <<  7)	/* Software Reset */
+#define ATMCI_MR			0x0004	/* Mode */
+# define ATMCI_MR_CLKDIV(x)		((x) <<  0)	/* Clock Divider */
+# define ATMCI_MR_PWSDIV(x)		((x) <<  8)	/* Power Saving Divider */
+# define ATMCI_MR_RDPROOF		(  1 << 11)	/* Read Proof */
+# define ATMCI_MR_WRPROOF		(  1 << 12)	/* Write Proof */
+# define ATMCI_MR_PDCFBYTE		(  1 << 13)	/* Force Byte Transfer */
+# define ATMCI_MR_PDCPADV		(  1 << 14)	/* Padding Value */
+# define ATMCI_MR_PDCMODE		(  1 << 15)	/* PDC-oriented Mode */
+#define ATMCI_DTOR			0x0008	/* Data Timeout */
+# define ATMCI_DTOCYC(x)		((x) <<  0)	/* Data Timeout Cycles */
+# define ATMCI_DTOMUL(x)		((x) <<  4)	/* Data Timeout Multiplier */
+#define ATMCI_SDCR			0x000c	/* SD Card / SDIO */
+# define ATMCI_SDCSEL_SLOT_A		(  0 <<  0)	/* Select SD slot A */
+# define ATMCI_SDCSEL_SLOT_B		(  1 <<  0)	/* Select SD slot A */
+# define ATMCI_SDCSEL_MASK		(  3 <<  0)
+# define ATMCI_SDCBUS_1BIT		(  0 <<  6)	/* 1-bit data bus */
+# define ATMCI_SDCBUS_4BIT		(  2 <<  6)	/* 4-bit data bus */
+# define ATMCI_SDCBUS_8BIT		(  3 <<  6)	/* 8-bit data bus[2] */
+# define ATMCI_SDCBUS_MASK		(  3 <<  6)
+#define ATMCI_ARGR			0x0010	/* Command Argument */
+#define ATMCI_CMDR			0x0014	/* Command */
+# define ATMCI_CMDR_CMDNB(x)		((x) <<  0)	/* Command Opcode */
+# define ATMCI_CMDR_RSPTYP_NONE		(  0 <<  6)	/* No response */
+# define ATMCI_CMDR_RSPTYP_48BIT	(  1 <<  6)	/* 48-bit response */
+# define ATMCI_CMDR_RSPTYP_136BIT	(  2 <<  6)	/* 136-bit response */
+# define ATMCI_CMDR_SPCMD_INIT		(  1 <<  8)	/* Initialization command */
+# define ATMCI_CMDR_SPCMD_SYNC		(  2 <<  8)	/* Synchronized command */
+# define ATMCI_CMDR_SPCMD_INT		(  4 <<  8)	/* Interrupt command */
+# define ATMCI_CMDR_SPCMD_INTRESP	(  5 <<  8)	/* Interrupt response */
+# define ATMCI_CMDR_OPDCMD		(  1 << 11)	/* Open Drain */
+# define ATMCI_CMDR_MAXLAT_5CYC		(  0 << 12)	/* Max latency 5 cycles */
+# define ATMCI_CMDR_MAXLAT_64CYC	(  1 << 12)	/* Max latency 64 cycles */
+# define ATMCI_CMDR_START_XFER		(  1 << 16)	/* Start data transfer */
+# define ATMCI_CMDR_STOP_XFER		(  2 << 16)	/* Stop data transfer */
+# define ATMCI_CMDR_TRDIR_WRITE		(  0 << 18)	/* Write data */
+# define ATMCI_CMDR_TRDIR_READ		(  1 << 18)	/* Read data */
+# define ATMCI_CMDR_BLOCK		(  0 << 19)	/* Single-block transfer */
+# define ATMCI_CMDR_MULTI_BLOCK		(  1 << 19)	/* Multi-block transfer */
+# define ATMCI_CMDR_STREAM		(  2 << 19)	/* MMC Stream transfer */
+# define ATMCI_CMDR_SDIO_BYTE		(  4 << 19)	/* SDIO Byte transfer */
+# define ATMCI_CMDR_SDIO_BLOCK		(  5 << 19)	/* SDIO Block transfer */
+# define ATMCI_CMDR_SDIO_SUSPEND	(  1 << 24)	/* SDIO Suspend Command */
+# define ATMCI_CMDR_SDIO_RESUME		(  2 << 24)	/* SDIO Resume Command */
+#define ATMCI_BLKR			0x0018	/* Block */
+# define ATMCI_BCNT(x)			((x) <<  0)	/* Data Block Count */
+# define ATMCI_BLKLEN(x)		((x) << 16)	/* Data Block Length */
+#define ATMCI_CSTOR			0x001c	/* Completion Signal Timeout[2] */
+# define ATMCI_CSTOCYC(x)		((x) <<  0)	/* CST cycles */
+# define ATMCI_CSTOMUL(x)		((x) <<  4)	/* CST multiplier */
+#define ATMCI_RSPR			0x0020	/* Response 0 */
+#define ATMCI_RSPR1			0x0024	/* Response 1 */
+#define ATMCI_RSPR2			0x0028	/* Response 2 */
+#define ATMCI_RSPR3			0x002c	/* Response 3 */
+#define ATMCI_RDR			0x0030	/* Receive Data */
+#define ATMCI_TDR			0x0034	/* Transmit Data */
+#define ATMCI_SR			0x0040	/* Status */
+#define ATMCI_IER			0x0044	/* Interrupt Enable */
+#define ATMCI_IDR			0x0048	/* Interrupt Disable */
+#define ATMCI_IMR			0x004c	/* Interrupt Mask */
+# define ATMCI_CMDRDY			(  1 <<   0)	/* Command Ready */
+# define ATMCI_RXRDY			(  1 <<   1)	/* Receiver Ready */
+# define ATMCI_TXRDY			(  1 <<   2)	/* Transmitter Ready */
+# define ATMCI_BLKE			(  1 <<   3)	/* Data Block Ended */
+# define ATMCI_DTIP			(  1 <<   4)	/* Data Transfer In Progress */
+# define ATMCI_NOTBUSY			(  1 <<   5)	/* Data Not Busy */
+# define ATMCI_ENDRX			(  1 <<   6)    /* End of RX Buffer */
+# define ATMCI_ENDTX			(  1 <<   7)    /* End of TX Buffer */
+# define ATMCI_SDIOIRQA			(  1 <<   8)	/* SDIO IRQ in slot A */
+# define ATMCI_SDIOIRQB			(  1 <<   9)	/* SDIO IRQ in slot B */
+# define ATMCI_SDIOWAIT			(  1 <<  12)    /* SDIO Read Wait Operation Status */
+# define ATMCI_CSRCV			(  1 <<  13)    /* CE-ATA Completion Signal Received */
+# define ATMCI_RXBUFF			(  1 <<  14)    /* RX Buffer Full */
+# define ATMCI_TXBUFE			(  1 <<  15)    /* TX Buffer Empty */
+# define ATMCI_RINDE			(  1 <<  16)	/* Response Index Error */
+# define ATMCI_RDIRE			(  1 <<  17)	/* Response Direction Error */
+# define ATMCI_RCRCE			(  1 <<  18)	/* Response CRC Error */
+# define ATMCI_RENDE			(  1 <<  19)	/* Response End Bit Error */
+# define ATMCI_RTOE			(  1 <<  20)	/* Response Time-Out Error */
+# define ATMCI_DCRCE			(  1 <<  21)	/* Data CRC Error */
+# define ATMCI_DTOE			(  1 <<  22)	/* Data Time-Out Error */
+# define ATMCI_CSTOE			(  1 <<  23)    /* Completion Signal Time-out Error */
+# define ATMCI_BLKOVRE			(  1 <<  24)    /* DMA Block Overrun Error */
+# define ATMCI_DMADONE			(  1 <<  25)    /* DMA Transfer Done */
+# define ATMCI_FIFOEMPTY		(  1 <<  26)    /* FIFO Empty Flag */
+# define ATMCI_XFRDONE			(  1 <<  27)    /* Transfer Done Flag */
+# define ATMCI_ACKRCV			(  1 <<  28)    /* Boot Operation Acknowledge Received */
+# define ATMCI_ACKRCVE			(  1 <<  29)    /* Boot Operation Acknowledge Error */
+# define ATMCI_OVRE			(  1 <<  30)	/* RX Overrun Error */
+# define ATMCI_UNRE			(  1 <<  31)	/* TX Underrun Error */
+#define ATMCI_DMA			0x0050	/* DMA Configuration[2] */
+# define ATMCI_DMA_OFFSET(x)		((x) <<  0)	/* DMA Write Buffer Offset */
+# define ATMCI_DMA_CHKSIZE(x)		((x) <<  4)	/* DMA Channel Read and Write Chunk Size */
+# define ATMCI_DMAEN			(  1 <<  8)	/* DMA Hardware Handshaking Enable */
+#define ATMCI_CFG			0x0054	/* Configuration[2] */
+# define ATMCI_CFG_FIFOMODE_1DATA	(  1 <<  0)	/* MCI Internal FIFO control mode */
+# define ATMCI_CFG_FERRCTRL_COR		(  1 <<  4)	/* Flow Error flag reset control mode */
+# define ATMCI_CFG_HSMODE		(  1 <<  8)	/* High Speed Mode */
+# define ATMCI_CFG_LSYNC		(  1 << 12)	/* Synchronize on the last block */
+#define ATMCI_WPMR			0x00e4	/* Write Protection Mode[2] */
+# define ATMCI_WP_EN			(  1 <<  0)	/* WP Enable */
+# define ATMCI_WP_KEY			(0x4d4349 << 8)	/* WP Key */
+#define ATMCI_WPSR			0x00e8	/* Write Protection Status[2] */
+# define ATMCI_GET_WP_VS(x)		((x) & 0x0f)
+# define ATMCI_GET_WP_VSRC(x)		(((x) >> 8) & 0xffff)
+#define ATMCI_VERSION			0x00FC  /* Version */
+#define ATMCI_FIFO_APERTURE		0x0200	/* FIFO Aperture[2] */
 
 /* This is not including the FIFO Aperture on MCI2 */
-#define MCI_REGS_SIZE		0x100
+#define ATMCI_REGS_SIZE		0x100
 
 /* Register access macros */
-#define mci_readl(port,reg)				\
-	__raw_readl((port)->regs + MCI_##reg)
-#define mci_writel(port,reg,value)			\
-	__raw_writel((value), (port)->regs + MCI_##reg)
+#define atmci_readl(port,reg)				\
+	__raw_readl((port)->regs + reg)
+#define atmci_writel(port,reg,value)			\
+	__raw_writel((value), (port)->regs + reg)
 
 #endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index fa8cae1d7005..a7ee50271465 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -30,6 +30,7 @@
 
 #include <mach/atmel-mci.h>
 #include <linux/atmel-mci.h>
+#include <linux/atmel_pdc.h>
 
 #include <asm/io.h>
 #include <asm/unaligned.h>
@@ -39,7 +40,7 @@
 
 #include "atmel-mci-regs.h"
 
-#define ATMCI_DATA_ERROR_FLAGS	(MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE)
+#define ATMCI_DATA_ERROR_FLAGS	(ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE)
 #define ATMCI_DMA_THRESHOLD	16
 
 enum {
@@ -58,18 +59,35 @@ enum atmel_mci_state {
 	STATE_DATA_ERROR,
 };
 
+enum atmci_xfer_dir {
+	XFER_RECEIVE = 0,
+	XFER_TRANSMIT,
+};
+
+enum atmci_pdc_buf {
+	PDC_FIRST_BUF = 0,
+	PDC_SECOND_BUF,
+};
+
+struct atmel_mci_caps {
+	bool    has_dma;
+	bool    has_pdc;
+	bool    has_cfg_reg;
+	bool    has_cstor_reg;
+	bool    has_highspeed;
+	bool    has_rwproof;
+};
+
 struct atmel_mci_dma {
-#ifdef CONFIG_MMC_ATMELMCI_DMA
 	struct dma_chan			*chan;
 	struct dma_async_tx_descriptor	*data_desc;
-#endif
 };
 
 /**
  * struct atmel_mci - MMC controller state shared between all slots
  * @lock: Spinlock protecting the queue and associated data.
  * @regs: Pointer to MMIO registers.
- * @sg: Scatterlist entry currently being processed by PIO code, if any.
+ * @sg: Scatterlist entry currently being processed by PIO or PDC code.
  * @pio_offset: Offset into the current scatterlist entry.
  * @cur_slot: The slot which is currently using the controller.
  * @mrq: The request currently being processed on @cur_slot,
@@ -77,6 +95,7 @@ struct atmel_mci_dma {
  * @cmd: The command currently being sent to the card, or NULL.
  * @data: The data currently being transferred, or NULL if no data
  *	transfer is in progress.
+ * @data_size: just data->blocks * data->blksz.
  * @dma: DMA client state.
  * @data_chan: DMA channel being used for the current data transfer.
  * @cmd_status: Snapshot of SR taken upon completion of the current
@@ -103,6 +122,13 @@ struct atmel_mci_dma {
  * @mck: The peripheral bus clock hooked up to the MMC controller.
  * @pdev: Platform device associated with the MMC controller.
  * @slot: Slots sharing this MMC controller.
+ * @caps: MCI capabilities depending on MCI version.
+ * @prepare_data: function to setup MCI before data transfer which
+ * depends on MCI capabilities.
+ * @submit_data: function to start data transfer which depends on MCI
+ * capabilities.
+ * @stop_transfer: function to stop data transfer which depends on MCI
+ * capabilities.
  *
  * Locking
  * =======
@@ -143,6 +169,7 @@ struct atmel_mci {
 	struct mmc_request	*mrq;
 	struct mmc_command	*cmd;
 	struct mmc_data		*data;
+	unsigned int		data_size;
 
 	struct atmel_mci_dma	dma;
 	struct dma_chan		*data_chan;
@@ -166,7 +193,13 @@ struct atmel_mci {
 	struct clk		*mck;
 	struct platform_device	*pdev;
 
-	struct atmel_mci_slot	*slot[ATMEL_MCI_MAX_NR_SLOTS];
+	struct atmel_mci_slot	*slot[ATMCI_MAX_NR_SLOTS];
+
+	struct atmel_mci_caps   caps;
+
+	u32 (*prepare_data)(struct atmel_mci *host, struct mmc_data *data);
+	void (*submit_data)(struct atmel_mci *host, struct mmc_data *data);
+	void (*stop_transfer)(struct atmel_mci *host);
 };
 
 /**
@@ -220,31 +253,6 @@ struct atmel_mci_slot {
 	set_bit(event, &host->pending_events)
 
 /*
- * Enable or disable features/registers based on
- * whether the processor supports them
- */
-static bool mci_has_rwproof(void)
-{
-	if (cpu_is_at91sam9261() || cpu_is_at91rm9200())
-		return false;
-	else
-		return true;
-}
-
-/*
- * The new MCI2 module isn't 100% compatible with the old MCI module,
- * and it has a few nice features which we want to use...
- */
-static inline bool atmci_is_mci2(void)
-{
-	if (cpu_is_at91sam9g45())
-		return true;
-
-	return false;
-}
-
-
-/*
  * The debugfs stuff below is mostly optimized away when
  * CONFIG_DEBUG_FS is not set.
  */
@@ -352,7 +360,7 @@ static int atmci_regs_show(struct seq_file *s, void *v)
 	struct atmel_mci	*host = s->private;
 	u32			*buf;
 
-	buf = kmalloc(MCI_REGS_SIZE, GFP_KERNEL);
+	buf = kmalloc(ATMCI_REGS_SIZE, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
 
@@ -363,47 +371,50 @@ static int atmci_regs_show(struct seq_file *s, void *v)
 	 */
 	spin_lock_bh(&host->lock);
 	clk_enable(host->mck);
-	memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
+	memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
 	clk_disable(host->mck);
 	spin_unlock_bh(&host->lock);
 
 	seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
-			buf[MCI_MR / 4],
-			buf[MCI_MR / 4] & MCI_MR_RDPROOF ? " RDPROOF" : "",
-			buf[MCI_MR / 4] & MCI_MR_WRPROOF ? " WRPROOF" : "",
-			buf[MCI_MR / 4] & 0xff);
-	seq_printf(s, "DTOR:\t0x%08x\n", buf[MCI_DTOR / 4]);
-	seq_printf(s, "SDCR:\t0x%08x\n", buf[MCI_SDCR / 4]);
-	seq_printf(s, "ARGR:\t0x%08x\n", buf[MCI_ARGR / 4]);
+			buf[ATMCI_MR / 4],
+			buf[ATMCI_MR / 4] & ATMCI_MR_RDPROOF ? " RDPROOF" : "",
+			buf[ATMCI_MR / 4] & ATMCI_MR_WRPROOF ? " WRPROOF" : "",
+			buf[ATMCI_MR / 4] & 0xff);
+	seq_printf(s, "DTOR:\t0x%08x\n", buf[ATMCI_DTOR / 4]);
+	seq_printf(s, "SDCR:\t0x%08x\n", buf[ATMCI_SDCR / 4]);
+	seq_printf(s, "ARGR:\t0x%08x\n", buf[ATMCI_ARGR / 4]);
 	seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n",
-			buf[MCI_BLKR / 4],
-			buf[MCI_BLKR / 4] & 0xffff,
-			(buf[MCI_BLKR / 4] >> 16) & 0xffff);
-	if (atmci_is_mci2())
-		seq_printf(s, "CSTOR:\t0x%08x\n", buf[MCI_CSTOR / 4]);
+			buf[ATMCI_BLKR / 4],
+			buf[ATMCI_BLKR / 4] & 0xffff,
+			(buf[ATMCI_BLKR / 4] >> 16) & 0xffff);
+	if (host->caps.has_cstor_reg)
+		seq_printf(s, "CSTOR:\t0x%08x\n", buf[ATMCI_CSTOR / 4]);
 
 	/* Don't read RSPR and RDR; it will consume the data there */
 
-	atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]);
-	atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]);
+	atmci_show_status_reg(s, "SR", buf[ATMCI_SR / 4]);
+	atmci_show_status_reg(s, "IMR", buf[ATMCI_IMR / 4]);
 
-	if (atmci_is_mci2()) {
+	if (host->caps.has_dma) {
 		u32 val;
 
-		val = buf[MCI_DMA / 4];
+		val = buf[ATMCI_DMA / 4];
 		seq_printf(s, "DMA:\t0x%08x OFFSET=%u CHKSIZE=%u%s\n",
 				val, val & 3,
 				((val >> 4) & 3) ?
 					1 << (((val >> 4) & 3) + 1) : 1,
-				val & MCI_DMAEN ? " DMAEN" : "");
+				val & ATMCI_DMAEN ? " DMAEN" : "");
+	}
+	if (host->caps.has_cfg_reg) {
+		u32 val;
 
-		val = buf[MCI_CFG / 4];
+		val = buf[ATMCI_CFG / 4];
 		seq_printf(s, "CFG:\t0x%08x%s%s%s%s\n",
 				val,
-				val & MCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "",
-				val & MCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "",
-				val & MCI_CFG_HSMODE ? " HSMODE" : "",
-				val & MCI_CFG_LSYNC ? " LSYNC" : "");
+				val & ATMCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "",
+				val & ATMCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "",
+				val & ATMCI_CFG_HSMODE ? " HSMODE" : "",
+				val & ATMCI_CFG_LSYNC ? " LSYNC" : "");
 	}
 
 	kfree(buf);
@@ -466,7 +477,7 @@ err:
 	dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
 }
 
-static inline unsigned int ns_to_clocks(struct atmel_mci *host,
+static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host,
 					unsigned int ns)
 {
 	return (ns * (host->bus_hz / 1000000) + 999) / 1000;
@@ -482,7 +493,8 @@ static void atmci_set_timeout(struct atmel_mci *host,
 	unsigned	dtocyc;
 	unsigned	dtomul;
 
-	timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
+	timeout = atmci_ns_to_clocks(host, data->timeout_ns)
+		+ data->timeout_clks;
 
 	for (dtomul = 0; dtomul < 8; dtomul++) {
 		unsigned shift = dtomul_to_shift[dtomul];
@@ -498,7 +510,7 @@ static void atmci_set_timeout(struct atmel_mci *host,
 
 	dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n",
 			dtocyc << dtomul_to_shift[dtomul]);
-	mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc)));
+	atmci_writel(host, ATMCI_DTOR, (ATMCI_DTOMUL(dtomul) | ATMCI_DTOCYC(dtocyc)));
 }
 
 /*
@@ -512,13 +524,13 @@ static u32 atmci_prepare_command(struct mmc_host *mmc,
 
 	cmd->error = -EINPROGRESS;
 
-	cmdr = MCI_CMDR_CMDNB(cmd->opcode);
+	cmdr = ATMCI_CMDR_CMDNB(cmd->opcode);
 
 	if (cmd->flags & MMC_RSP_PRESENT) {
 		if (cmd->flags & MMC_RSP_136)
-			cmdr |= MCI_CMDR_RSPTYP_136BIT;
+			cmdr |= ATMCI_CMDR_RSPTYP_136BIT;
 		else
-			cmdr |= MCI_CMDR_RSPTYP_48BIT;
+			cmdr |= ATMCI_CMDR_RSPTYP_48BIT;
 	}
 
 	/*
@@ -526,34 +538,34 @@ static u32 atmci_prepare_command(struct mmc_host *mmc,
 	 * it's too difficult to determine whether this is an ACMD or
 	 * not. Better make it 64.
 	 */
-	cmdr |= MCI_CMDR_MAXLAT_64CYC;
+	cmdr |= ATMCI_CMDR_MAXLAT_64CYC;
 
 	if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
-		cmdr |= MCI_CMDR_OPDCMD;
+		cmdr |= ATMCI_CMDR_OPDCMD;
 
 	data = cmd->data;
 	if (data) {
-		cmdr |= MCI_CMDR_START_XFER;
+		cmdr |= ATMCI_CMDR_START_XFER;
 
 		if (cmd->opcode == SD_IO_RW_EXTENDED) {
-			cmdr |= MCI_CMDR_SDIO_BLOCK;
+			cmdr |= ATMCI_CMDR_SDIO_BLOCK;
 		} else {
 			if (data->flags & MMC_DATA_STREAM)
-				cmdr |= MCI_CMDR_STREAM;
+				cmdr |= ATMCI_CMDR_STREAM;
 			else if (data->blocks > 1)
-				cmdr |= MCI_CMDR_MULTI_BLOCK;
+				cmdr |= ATMCI_CMDR_MULTI_BLOCK;
 			else
-				cmdr |= MCI_CMDR_BLOCK;
+				cmdr |= ATMCI_CMDR_BLOCK;
 		}
 
 		if (data->flags & MMC_DATA_READ)
-			cmdr |= MCI_CMDR_TRDIR_READ;
+			cmdr |= ATMCI_CMDR_TRDIR_READ;
 	}
 
 	return cmdr;
 }
 
-static void atmci_start_command(struct atmel_m