intel: Move the Intel wired LAN drivers

Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and
the necessary Kconfig and Makefile changes.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 4111 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
new file mode 100644
index 000000000000..4e36978b8fd8
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -0,0 +1,4111 @@
+/*******************************************************************************
+
+  Intel PRO/1000 Linux driver
+  Copyright(c) 1999 - 2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/*
+ * 82562G 10/100 Network Connection
+ * 82562G-2 10/100 Network Connection
+ * 82562GT 10/100 Network Connection
+ * 82562GT-2 10/100 Network Connection
+ * 82562V 10/100 Network Connection
+ * 82562V-2 10/100 Network Connection
+ * 82566DC-2 Gigabit Network Connection
+ * 82566DC Gigabit Network Connection
+ * 82566DM-2 Gigabit Network Connection
+ * 82566DM Gigabit Network Connection
+ * 82566MC Gigabit Network Connection
+ * 82566MM Gigabit Network Connection
+ * 82567LM Gigabit Network Connection
+ * 82567LF Gigabit Network Connection
+ * 82567V Gigabit Network Connection
+ * 82567LM-2 Gigabit Network Connection
+ * 82567LF-2 Gigabit Network Connection
+ * 82567V-2 Gigabit Network Connection
+ * 82567LF-3 Gigabit Network Connection
+ * 82567LM-3 Gigabit Network Connection
+ * 82567LM-4 Gigabit Network Connection
+ * 82577LM Gigabit Network Connection
+ * 82577LC Gigabit Network Connection
+ * 82578DM Gigabit Network Connection
+ * 82578DC Gigabit Network Connection
+ * 82579LM Gigabit Network Connection
+ * 82579V Gigabit Network Connection
+ */
+
+#include "e1000.h"
+
+#define ICH_FLASH_GFPREG		0x0000
+#define ICH_FLASH_HSFSTS		0x0004
+#define ICH_FLASH_HSFCTL		0x0006
+#define ICH_FLASH_FADDR			0x0008
+#define ICH_FLASH_FDATA0		0x0010
+#define ICH_FLASH_PR0			0x0074
+
+#define ICH_FLASH_READ_COMMAND_TIMEOUT	500
+#define ICH_FLASH_WRITE_COMMAND_TIMEOUT	500
+#define ICH_FLASH_ERASE_COMMAND_TIMEOUT	3000000
+#define ICH_FLASH_LINEAR_ADDR_MASK	0x00FFFFFF
+#define ICH_FLASH_CYCLE_REPEAT_COUNT	10
+
+#define ICH_CYCLE_READ			0
+#define ICH_CYCLE_WRITE			2
+#define ICH_CYCLE_ERASE			3
+
+#define FLASH_GFPREG_BASE_MASK		0x1FFF
+#define FLASH_SECTOR_ADDR_SHIFT		12
+
+#define ICH_FLASH_SEG_SIZE_256		256
+#define ICH_FLASH_SEG_SIZE_4K		4096
+#define ICH_FLASH_SEG_SIZE_8K		8192
+#define ICH_FLASH_SEG_SIZE_64K		65536
+
+
+#define E1000_ICH_FWSM_RSPCIPHY	0x00000040 /* Reset PHY on PCI Reset */
+/* FW established a valid mode */
+#define E1000_ICH_FWSM_FW_VALID		0x00008000
+
+#define E1000_ICH_MNG_IAMT_MODE		0x2
+
+#define ID_LED_DEFAULT_ICH8LAN  ((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_DEF1_OFF2 <<  8) | \
+				 (ID_LED_DEF1_ON2  <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define E1000_ICH_NVM_SIG_WORD		0x13
+#define E1000_ICH_NVM_SIG_MASK		0xC000
+#define E1000_ICH_NVM_VALID_SIG_MASK    0xC0
+#define E1000_ICH_NVM_SIG_VALUE         0x80
+
+#define E1000_ICH8_LAN_INIT_TIMEOUT	1500
+
+#define E1000_FEXTNVM_SW_CONFIG		1
+#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M :/ */
+
+#define E1000_FEXTNVM4_BEACON_DURATION_MASK    0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_8USEC   0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_16USEC  0x3
+
+#define PCIE_ICH8_SNOOP_ALL		PCIE_NO_SNOOP_ALL
+
+#define E1000_ICH_RAR_ENTRIES		7
+
+#define PHY_PAGE_SHIFT 5
+#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
+			   ((reg) & MAX_PHY_REG_ADDRESS))
+#define IGP3_KMRN_DIAG  PHY_REG(770, 19) /* KMRN Diagnostic */
+#define IGP3_VR_CTRL    PHY_REG(776, 18) /* Voltage Regulator Control */
+
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS	0x0002
+#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300
+#define IGP3_VR_CTRL_MODE_SHUTDOWN	0x0200
+
+#define HV_LED_CONFIG		PHY_REG(768, 30) /* LED Configuration */
+
+#define SW_FLAG_TIMEOUT    1000 /* SW Semaphore flag timeout in milliseconds */
+
+/* SMBus Address Phy Register */
+#define HV_SMB_ADDR            PHY_REG(768, 26)
+#define HV_SMB_ADDR_MASK       0x007F
+#define HV_SMB_ADDR_PEC_EN     0x0200
+#define HV_SMB_ADDR_VALID      0x0080
+
+/* PHY Power Management Control */
+#define HV_PM_CTRL		PHY_REG(770, 17)
+
+/* PHY Low Power Idle Control */
+#define I82579_LPI_CTRL			PHY_REG(772, 20)
+#define I82579_LPI_CTRL_ENABLE_MASK	0x6000
+
+/* EMI Registers */
+#define I82579_EMI_ADDR         0x10
+#define I82579_EMI_DATA         0x11
+#define I82579_LPI_UPDATE_TIMER 0x4805	/* in 40ns units + 40 ns base value */
+
+/* Strapping Option Register - RO */
+#define E1000_STRAP                     0x0000C
+#define E1000_STRAP_SMBUS_ADDRESS_MASK  0x00FE0000
+#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
+
+/* OEM Bits Phy Register */
+#define HV_OEM_BITS            PHY_REG(768, 25)
+#define HV_OEM_BITS_LPLU       0x0004 /* Low Power Link Up */
+#define HV_OEM_BITS_GBE_DIS    0x0040 /* Gigabit Disable */
+#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
+
+#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
+#define E1000_NVM_K1_ENABLE 0x1  /* NVM Enable K1 bit */
+
+/* KMRN Mode Control */
+#define HV_KMRN_MODE_CTRL      PHY_REG(769, 16)
+#define HV_KMRN_MDIO_SLOW      0x0400
+
+/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
+/* Offset 04h HSFSTS */
+union ich8_hws_flash_status {
+	struct ich8_hsfsts {
+		u16 flcdone    :1; /* bit 0 Flash Cycle Done */
+		u16 flcerr     :1; /* bit 1 Flash Cycle Error */
+		u16 dael       :1; /* bit 2 Direct Access error Log */
+		u16 berasesz   :2; /* bit 4:3 Sector Erase Size */
+		u16 flcinprog  :1; /* bit 5 flash cycle in Progress */
+		u16 reserved1  :2; /* bit 13:6 Reserved */
+		u16 reserved2  :6; /* bit 13:6 Reserved */
+		u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */
+		u16 flockdn    :1; /* bit 15 Flash Config Lock-Down */
+	} hsf_status;
+	u16 regval;
+};
+
+/* ICH GbE Flash Hardware Sequencing Flash control Register bit breakdown */
+/* Offset 06h FLCTL */
+union ich8_hws_flash_ctrl {
+	struct ich8_hsflctl {
+		u16 flcgo      :1;   /* 0 Flash Cycle Go */
+		u16 flcycle    :2;   /* 2:1 Flash Cycle */
+		u16 reserved   :5;   /* 7:3 Reserved  */
+		u16 fldbcount  :2;   /* 9:8 Flash Data Byte Count */
+		u16 flockdn    :6;   /* 15:10 Reserved */
+	} hsf_ctrl;
+	u16 regval;
+};
+
+/* ICH Flash Region Access Permissions */
+union ich8_hws_flash_regacc {
+	struct ich8_flracc {
+		u32 grra      :8; /* 0:7 GbE region Read Access */
+		u32 grwa      :8; /* 8:15 GbE region Write Access */
+		u32 gmrag     :8; /* 23:16 GbE Master Read Access Grant */
+		u32 gmwag     :8; /* 31:24 GbE Master Write Access Grant */
+	} hsf_flregacc;
+	u16 regval;
+};
+
+/* ICH Flash Protected Region */
+union ich8_flash_protected_range {
+	struct ich8_pr {
+		u32 base:13;     /* 0:12 Protected Range Base */
+		u32 reserved1:2; /* 13:14 Reserved */
+		u32 rpe:1;       /* 15 Read Protection Enable */
+		u32 limit:13;    /* 16:28 Protected Range Limit */
+		u32 reserved2:2; /* 29:30 Reserved */
+		u32 wpe:1;       /* 31 Write Protection Enable */
+	} range;
+	u32 regval;
+};
+
+static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw);
+static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw);
+static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw);
+static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank);
+static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
+						u32 offset, u8 byte);
+static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u8 *data);
+static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u16 *data);
+static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u8 size, u16 *data);
+static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw);
+static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw);
+static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw);
+static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw);
+static s32 e1000_led_on_ich8lan(struct e1000_hw *hw);
+static s32 e1000_led_off_ich8lan(struct e1000_hw *hw);
+static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw);
+static s32 e1000_setup_led_pchlan(struct e1000_hw *hw);
+static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
+static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
+static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
+static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
+static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
+static s32  e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw);
+static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
+static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
+
+static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
+{
+	return readw(hw->flash_address + reg);
+}
+
+static inline u32 __er32flash(struct e1000_hw *hw, unsigned long reg)
+{
+	return readl(hw->flash_address + reg);
+}
+
+static inline void __ew16flash(struct e1000_hw *hw, unsigned long reg, u16 val)
+{
+	writew(val, hw->flash_address + reg);
+}
+
+static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
+{
+	writel(val, hw->flash_address + reg);
+}
+
+#define er16flash(reg)		__er16flash(hw, (reg))
+#define er32flash(reg)		__er32flash(hw, (reg))
+#define ew16flash(reg,val)	__ew16flash(hw, (reg), (val))
+#define ew32flash(reg,val)	__ew32flash(hw, (reg), (val))
+
+static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw)
+{
+	u32 ctrl;
+
+	ctrl = er32(CTRL);
+	ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
+	ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
+	ew32(CTRL, ctrl);
+	e1e_flush();
+	udelay(10);
+	ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
+	ew32(CTRL, ctrl);
+}
+
+/**
+ *  e1000_init_phy_params_pchlan - Initialize PHY function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize family-specific PHY parameters and function pointers.
+ **/
+static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 fwsm;
+	s32 ret_val = 0;
+
+	phy->addr                     = 1;
+	phy->reset_delay_us           = 100;
+
+	phy->ops.set_page             = e1000_set_page_igp;
+	phy->ops.read_reg             = e1000_read_phy_reg_hv;
+	phy->ops.read_reg_locked      = e1000_read_phy_reg_hv_locked;
+	phy->ops.read_reg_page        = e1000_read_phy_reg_page_hv;
+	phy->ops.set_d0_lplu_state    = e1000_set_lplu_state_pchlan;
+	phy->ops.set_d3_lplu_state    = e1000_set_lplu_state_pchlan;
+	phy->ops.write_reg            = e1000_write_phy_reg_hv;
+	phy->ops.write_reg_locked     = e1000_write_phy_reg_hv_locked;
+	phy->ops.write_reg_page       = e1000_write_phy_reg_page_hv;
+	phy->ops.power_up             = e1000_power_up_phy_copper;
+	phy->ops.power_down           = e1000_power_down_phy_copper_ich8lan;
+	phy->autoneg_mask             = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+	/*
+	 * The MAC-PHY interconnect may still be in SMBus mode
+	 * after Sx->S0.  If the manageability engine (ME) is
+	 * disabled, then toggle the LANPHYPC Value bit to force
+	 * the interconnect to PCIe mode.
+	 */
+	fwsm = er32(FWSM);
+	if (!(fwsm & E1000_ICH_FWSM_FW_VALID) && !e1000_check_reset_block(hw)) {
+		e1000_toggle_lanphypc_value_ich8lan(hw);
+		msleep(50);
+
+		/*
+		 * Gate automatic PHY configuration by hardware on
+		 * non-managed 82579
+		 */
+		if (hw->mac.type == e1000_pch2lan)
+			e1000_gate_hw_phy_config_ich8lan(hw, true);
+	}
+
+	/*
+	 * Reset the PHY before any access to it.  Doing so, ensures that
+	 * the PHY is in a known good state before we read/write PHY registers.
+	 * The generic reset is sufficient here, because we haven't determined
+	 * the PHY type yet.
+	 */
+	ret_val = e1000e_phy_hw_reset_generic(hw);
+	if (ret_val)
+		goto out;
+
+	/* Ungate automatic PHY configuration on non-managed 82579 */
+	if ((hw->mac.type == e1000_pch2lan) &&
+	    !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
+		usleep_range(10000, 20000);
+		e1000_gate_hw_phy_config_ich8lan(hw, false);
+	}
+
+	phy->id = e1000_phy_unknown;
+	switch (hw->mac.type) {
+	default:
+		ret_val = e1000e_get_phy_id(hw);
+		if (ret_val)
+			goto out;
+		if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
+			break;
+		/* fall-through */
+	case e1000_pch2lan:
+		/*
+		 * In case the PHY needs to be in mdio slow mode,
+		 * set slow mode and try to get the PHY id again.
+		 */
+		ret_val = e1000_set_mdio_slow_mode_hv(hw);
+		if (ret_val)
+			goto out;
+		ret_val = e1000e_get_phy_id(hw);
+		if (ret_val)
+			goto out;
+		break;
+	}
+	phy->type = e1000e_get_phy_type_from_id(phy->id);
+
+	switch (phy->type) {
+	case e1000_phy_82577:
+	case e1000_phy_82579:
+		phy->ops.check_polarity = e1000_check_polarity_82577;
+		phy->ops.force_speed_duplex =
+		    e1000_phy_force_speed_duplex_82577;
+		phy->ops.get_cable_length = e1000_get_cable_length_82577;
+		phy->ops.get_info = e1000_get_phy_info_82577;
+		phy->ops.commit = e1000e_phy_sw_reset;
+		break;
+	case e1000_phy_82578:
+		phy->ops.check_polarity = e1000_check_polarity_m88;
+		phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
+		phy->ops.get_cable_length = e1000e_get_cable_length_m88;
+		phy->ops.get_info = e1000e_get_phy_info_m88;
+		break;
+	default:
+		ret_val = -E1000_ERR_PHY;
+		break;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_init_phy_params_ich8lan - Initialize PHY function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize family-specific PHY parameters and function pointers.
+ **/
+static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 i = 0;
+
+	phy->addr			= 1;
+	phy->reset_delay_us		= 100;
+
+	phy->ops.power_up               = e1000_power_up_phy_copper;
+	phy->ops.power_down             = e1000_power_down_phy_copper_ich8lan;
+
+	/*
+	 * We may need to do this twice - once for IGP and if that fails,
+	 * we'll set BM func pointers and try again
+	 */
+	ret_val = e1000e_determine_phy_address(hw);
+	if (ret_val) {
+		phy->ops.write_reg = e1000e_write_phy_reg_bm;
+		phy->ops.read_reg  = e1000e_read_phy_reg_bm;
+		ret_val = e1000e_determine_phy_address(hw);
+		if (ret_val) {
+			e_dbg("Cannot determine PHY addr. Erroring out\n");
+			return ret_val;
+		}
+	}
+
+	phy->id = 0;
+	while ((e1000_phy_unknown == e1000e_get_phy_type_from_id(phy->id)) &&
+	       (i++ < 100)) {
+		usleep_range(1000, 2000);
+		ret_val = e1000e_get_phy_id(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Verify phy id */
+	switch (phy->id) {
+	case IGP03E1000_E_PHY_ID:
+		phy->type = e1000_phy_igp_3;
+		phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+		phy->ops.read_reg_locked = e1000e_read_phy_reg_igp_locked;
+		phy->ops.write_reg_locked = e1000e_write_phy_reg_igp_locked;
+		phy->ops.get_info = e1000e_get_phy_info_igp;
+		phy->ops.check_polarity = e1000_check_polarity_igp;
+		phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_igp;
+		break;
+	case IFE_E_PHY_ID:
+	case IFE_PLUS_E_PHY_ID:
+	case IFE_C_E_PHY_ID:
+		phy->type = e1000_phy_ife;
+		phy->autoneg_mask = E1000_ALL_NOT_GIG;
+		phy->ops.get_info = e1000_get_phy_info_ife;
+		phy->ops.check_polarity = e1000_check_polarity_ife;
+		phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_ife;
+		break;
+	case BME1000_E_PHY_ID:
+		phy->type = e1000_phy_bm;
+		phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+		phy->ops.read_reg = e1000e_read_phy_reg_bm;
+		phy->ops.write_reg = e1000e_write_phy_reg_bm;
+		phy->ops.commit = e1000e_phy_sw_reset;
+		phy->ops.get_info = e1000e_get_phy_info_m88;
+		phy->ops.check_polarity = e1000_check_polarity_m88;
+		phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
+		break;
+	default:
+		return -E1000_ERR_PHY;
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_init_nvm_params_ich8lan - Initialize NVM function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize family-specific NVM parameters and function
+ *  pointers.
+ **/
+static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u32 gfpreg, sector_base_addr, sector_end_addr;
+	u16 i;
+
+	/* Can't read flash registers if the register set isn't mapped. */
+	if (!hw->flash_address) {
+		e_dbg("ERROR: Flash registers not mapped\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	nvm->type = e1000_nvm_flash_sw;
+
+	gfpreg = er32flash(ICH_FLASH_GFPREG);
+
+	/*
+	 * sector_X_addr is a "sector"-aligned address (4096 bytes)
+	 * Add 1 to sector_end_addr since this sector is included in
+	 * the overall size.
+	 */
+	sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK;
+	sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1;
+
+	/* flash_base_addr is byte-aligned */
+	nvm->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT;
+
+	/*
+	 * find total size of the NVM, then cut in half since the total
+	 * size represents two separate NVM banks.
+	 */
+	nvm->flash_bank_size = (sector_end_addr - sector_base_addr)
+				<< FLASH_SECTOR_ADDR_SHIFT;
+	nvm->flash_bank_size /= 2;
+	/* Adjust to word count */
+	nvm->flash_bank_size /= sizeof(u16);
+
+	nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS;
+
+	/* Clear shadow ram */
+	for (i = 0; i < nvm->word_size; i++) {
+		dev_spec->shadow_ram[i].modified = false;
+		dev_spec->shadow_ram[i].value    = 0xFFFF;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_init_mac_params_ich8lan - Initialize MAC function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize family-specific MAC parameters and function
+ *  pointers.
+ **/
+static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct e1000_mac_info *mac = &hw->mac;
+
+	/* Set media type function pointer */
+	hw->phy.media_type = e1000_media_type_copper;
+
+	/* Set mta register count */
+	mac->mta_reg_count = 32;
+	/* Set rar entry count */
+	mac->rar_entry_count = E1000_ICH_RAR_ENTRIES;
+	if (mac->type == e1000_ich8lan)
+		mac->rar_entry_count--;
+	/* FWSM register */
+	mac->has_fwsm = true;
+	/* ARC subsystem not supported */
+	mac->arc_subsystem_valid = false;
+	/* Adaptive IFS supported */
+	mac->adaptive_ifs = true;
+
+	/* LED operations */
+	switch (mac->type) {
+	case e1000_ich8lan:
+	case e1000_ich9lan:
+	case e1000_ich10lan:
+		/* check management mode */
+		mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
+		/* ID LED init */
+		mac->ops.id_led_init = e1000e_id_led_init;
+		/* blink LED */
+		mac->ops.blink_led = e1000e_blink_led_generic;
+		/* setup LED */
+		mac->ops.setup_led = e1000e_setup_led_generic;
+		/* cleanup LED */
+		mac->ops.cleanup_led = e1000_cleanup_led_ich8lan;
+		/* turn on/off LED */
+		mac->ops.led_on = e1000_led_on_ich8lan;
+		mac->ops.led_off = e1000_led_off_ich8lan;
+		break;
+	case e1000_pchlan:
+	case e1000_pch2lan:
+		/* check management mode */
+		mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
+		/* ID LED init */
+		mac->ops.id_led_init = e1000_id_led_init_pchlan;
+		/* setup LED */
+		mac->ops.setup_led = e1000_setup_led_pchlan;
+		/* cleanup LED */
+		mac->ops.cleanup_led = e1000_cleanup_led_pchlan;
+		/* turn on/off LED */
+		mac->ops.led_on = e1000_led_on_pchlan;
+		mac->ops.led_off = e1000_led_off_pchlan;
+		break;
+	default:
+		break;
+	}
+
+	/* Enable PCS Lock-loss workaround for ICH8 */
+	if (mac->type == e1000_ich8lan)
+		e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
+
+	/* Gate automatic PHY configuration by hardware on managed 82579 */
+	if ((mac->type == e1000_pch2lan) &&
+	    (er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+		e1000_gate_hw_phy_config_ich8lan(hw, true);
+
+	return 0;
+}
+
+/**
+ *  e1000_set_eee_pchlan - Enable/disable EEE support
+ *  @hw: pointer to the HW structure
+ *
+ *  Enable/disable EEE based on setting in dev_spec structure.  The bits in
+ *  the LPI Control register will remain set only if/when link is up.
+ **/
+static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 phy_reg;
+
+	if (hw->phy.type != e1000_phy_82579)
+		goto out;
+
+	ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
+	if (ret_val)
+		goto out;
+
+	if (hw->dev_spec.ich8lan.eee_disable)
+		phy_reg &= ~I82579_LPI_CTRL_ENABLE_MASK;
+	else
+		phy_reg |= I82579_LPI_CTRL_ENABLE_MASK;
+
+	ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_check_for_copper_link_ich8lan - Check for link (Copper)
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks to see of the link status of the hardware has changed.  If a
+ *  change in link status has been detected, then we read the PHY registers
+ *  to get the current speed/duplex if link exists.
+ **/
+static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	bool link;
+
+	/*
+	 * We only want to go out to the PHY registers to see if Auto-Neg
+	 * has completed and/or if our link status has changed.  The
+	 * get_link_status flag is set upon receiving a Link Status
+	 * Change or Rx Sequence Error interrupt.
+	 */
+	if (!mac->get_link_status) {
+		ret_val = 0;
+		goto out;
+	}
+
+	/*
+	 * First we want to see if the MII Status Register reports
+	 * link.  If so, then we want to get the current speed/duplex
+	 * of the PHY.
+	 */
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		goto out;
+
+	if (hw->mac.type == e1000_pchlan) {
+		ret_val = e1000_k1_gig_workaround_hv(hw, link);
+		if (ret_val)
+			goto out;
+	}
+
+	if (!link)
+		goto out; /* No link detected */
+
+	mac->get_link_status = false;
+
+	if (hw->phy.type == e1000_phy_82578) {
+		ret_val = e1000_link_stall_workaround_hv(hw);
+		if (ret_val)
+			goto out;
+	}
+
+	if (hw->mac.type == e1000_pch2lan) {
+		ret_val = e1000_k1_workaround_lv(hw);
+		if (ret_val)
+			goto out;
+	}
+
+	/*
+	 * Check if there was DownShift, must be checked
+	 * immediately after link-up
+	 */
+	e1000e_check_downshift(hw);
+
+	/* Enable/Disable EEE after link up */
+	ret_val = e1000_set_eee_pchlan(hw);
+	if (ret_val)
+		goto out;
+
+	/*
+	 * If we are forcing speed/duplex, then we simply return since
+	 * we have already determined whether we have link or not.
+	 */
+	if (!mac->autoneg) {
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	/*
+	 * Auto-Neg is enabled.  Auto Speed Detection takes care
+	 * of MAC speed/duplex configuration.  So we only need to
+	 * configure Collision Distance in the MAC.
+	 */
+	e1000e_config_collision_dist(hw);
+
+	/*
+	 * Configure Flow Control now that Auto-Neg has completed.
+	 * First, we need to restore the desired flow control
+	 * settings because we may have had to re-autoneg with a
+	 * different link partner.
+	 */
+	ret_val = e1000e_config_fc_after_link_up(hw);
+	if (ret_val)
+		e_dbg("Error configuring flow control\n");
+
+out:
+	return ret_val;
+}
+
+static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	s32 rc;
+
+	rc = e1000_init_mac_params_ich8lan(adapter);
+	if (rc)
+		return rc;
+
+	rc = e1000_init_nvm_params_ich8lan(hw);
+	if (rc)
+		return rc;
+
+	switch (hw->mac.type) {
+	case e1000_ich8lan:
+	case e1000_ich9lan:
+	case e1000_ich10lan:
+		rc = e1000_init_phy_params_ich8lan(hw);
+		break;
+	case e1000_pchlan:
+	case e1000_pch2lan:
+		rc = e1000_init_phy_params_pchlan(hw);
+		break;
+	default:
+		break;
+	}
+	if (rc)
+		return rc;
+
+	/*
+	 * Disable Jumbo Frame support on parts with Intel 10/100 PHY or
+	 * on parts with MACsec enabled in NVM (reflected in CTRL_EXT).
+	 */
+	if ((adapter->hw.phy.type == e1000_phy_ife) ||
+	    ((adapter->hw.mac.type >= e1000_pch2lan) &&
+	     (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) {
+		adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
+		adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN;
+
+		hw->mac.ops.blink_led = NULL;
+	}
+
+	if ((adapter->hw.mac.type == e1000_ich8lan) &&
+	    (adapter->hw.phy.type == e1000_phy_igp_3))
+		adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
+
+	/* Disable EEE by default until IEEE802.3az spec is finalized */
+	if (adapter->flags2 & FLAG2_HAS_EEE)
+		adapter->hw.dev_spec.ich8lan.eee_disable = true;
+
+	return 0;
+}
+
+static DEFINE_MUTEX(nvm_mutex);
+
+/**
+ *  e1000_acquire_nvm_ich8lan - Acquire NVM mutex
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquires the mutex for performing NVM operations.
+ **/
+static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw)
+{
+	mutex_lock(&nvm_mutex);
+
+	return 0;
+}
+
+/**
+ *  e1000_release_nvm_ich8lan - Release NVM mutex
+ *  @hw: pointer to the HW structure
+ *
+ *  Releases the mutex used while performing NVM operations.
+ **/
+static void e1000_release_nvm_ich8lan(struct e1000_hw *hw)
+{
+	mutex_unlock(&nvm_mutex);
+}
+
+static DEFINE_MUTEX(swflag_mutex);
+
+/**
+ *  e1000_acquire_swflag_ich8lan - Acquire software control flag
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquires the software control flag for performing PHY and select
+ *  MAC CSR accesses.
+ **/
+static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
+{
+	u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT;
+	s32 ret_val = 0;
+
+	mutex_lock(&swflag_mutex);
+
+	while (timeout) {
+		extcnf_ctrl = er32(EXTCNF_CTRL);
+		if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG))
+			break;
+
+		mdelay(1);
+		timeout--;
+	}
+
+	if (!timeout) {
+		e_dbg("SW/FW/HW has locked the resource for too long.\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	timeout = SW_FLAG_TIMEOUT;
+
+	extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
+	ew32(EXTCNF_CTRL, extcnf_ctrl);
+
+	while (timeout) {
+		extcnf_ctrl = er32(EXTCNF_CTRL);
+		if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
+			break;
+
+		mdelay(1);
+		timeout--;
+	}
+
+	if (!timeout) {
+		e_dbg("Failed to acquire the semaphore.\n");
+		extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+		ew32(EXTCNF_CTRL, extcnf_ctrl);
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+out:
+	if (ret_val)
+		mutex_unlock(&swflag_mutex);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_release_swflag_ich8lan - Release software control flag
+ *  @hw: pointer to the HW structure
+ *
+ *  Releases the software control flag for performing PHY and select
+ *  MAC CSR accesses.
+ **/
+static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
+{
+	u32 extcnf_ctrl;
+
+	extcnf_ctrl = er32(EXTCNF_CTRL);
+
+	if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) {
+		extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+		ew32(EXTCNF_CTRL, extcnf_ctrl);
+	} else {
+		e_dbg("Semaphore unexpectedly released by sw/fw/hw\n");
+	}
+
+	mutex_unlock(&swflag_mutex);
+}
+
+/**
+ *  e1000_check_mng_mode_ich8lan - Checks management mode
+ *  @hw: pointer to the HW structure
+ *
+ *  This checks if the adapter has any manageability enabled.
+ *  This is a function pointer entry point only called by read/write
+ *  routines for the PHY and NVM parts.
+ **/
+static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
+{
+	u32 fwsm;
+
+	fwsm = er32(FWSM);
+	return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
+	       ((fwsm & E1000_FWSM_MODE_MASK) ==
+		(E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
+}
+
+/**
+ *  e1000_check_mng_mode_pchlan - Checks management mode
+ *  @hw: pointer to the HW structure
+ *
+ *  This checks if the adapter has iAMT enabled.
+ *  This is a function pointer entry point only called by read/write
+ *  routines for the PHY and NVM parts.
+ **/
+static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw)
+{
+	u32 fwsm;
+
+	fwsm = er32(FWSM);
+	return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
+	       (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
+}
+
+/**
+ *  e1000_check_reset_block_ich8lan - Check if PHY reset is blocked
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks if firmware is blocking the reset of the PHY.
+ *  This is a function pointer entry point only called by
+ *  reset routines.
+ **/
+static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw)
+{
+	u32 fwsm;
+
+	fwsm = er32(FWSM);
+
+	return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET;
+}
+
+/**
+ *  e1000_write_smbus_addr - Write SMBus address to PHY needed during Sx states
+ *  @hw: pointer to the HW structure
+ *
+ *  Assumes semaphore already acquired.
+ *
+ **/
+static s32 e1000_write_smbus_addr(struct e1000_hw *hw)
+{
+	u16 phy_data;
+	u32 strap = er32(STRAP);
+	s32 ret_val = 0;
+
+	strap &= E1000_STRAP_SMBUS_ADDRESS_MASK;
+
+	ret_val = e1000_read_phy_reg_hv_locked(hw, HV_SMB_ADDR, &phy_data);
+	if (ret_val)
+		goto out;
+
+	phy_data &= ~HV_SMB_ADDR_MASK;
+	phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT);
+	phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
+	ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration
+ *  @hw:   pointer to the HW structure
+ *
+ *  SW should configure the LCD from the NVM extended configuration region
+ *  as a workaround for certain parts.
+ **/
+static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
+	s32 ret_val = 0;
+	u16 word_addr, reg_data, reg_addr, phy_page = 0;
+
+	/*
+	 * Initialize the PHY from the NVM on ICH platforms.  This
+	 * is needed due to an issue where the NVM configuration is
+	 * not properly autoloaded after power transitions.
+	 * Therefore, after each PHY reset, we will load the
+	 * configuration data out of the NVM manually.
+	 */
+	switch (hw->mac.type) {
+	case e1000_ich8lan:
+		if (phy->type != e1000_phy_igp_3)
+			return ret_val;
+
+		if ((hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) ||
+		    (hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_C)) {
+			sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
+			break;
+		}
+		/* Fall-thru */
+	case e1000_pchlan:
+	case e1000_pch2lan:
+		sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
+		break;
+	default:
+		return ret_val;
+	}
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	data = er32(FEXTNVM);
+	if (!(data & sw_cfg_mask))
+		goto out;
+
+	/*
+	 * Make sure HW does not configure LCD from PHY
+	 * extended configuration before SW configuration
+	 */
+	data = er32(EXTCNF_CTRL);
+	if (!(hw->mac.type == e1000_pch2lan)) {
+		if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
+			goto out;
+	}
+
+	cnf_size = er32(EXTCNF_SIZE);
+	cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
+	cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
+	if (!cnf_size)
+		goto out;
+
+	cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
+	cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
+
+	if ((!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
+	    (hw->mac.type == e1000_pchlan)) ||
+	     (hw->mac.type == e1000_pch2lan)) {
+		/*
+		 * HW configures the SMBus address and LEDs when the
+		 * OEM and LCD Write Enable bits are set in the NVM.
+		 * When both NVM bits are cleared, SW will configure
+		 * them instead.
+		 */
+		ret_val = e1000_write_smbus_addr(hw);
+		if (ret_val)
+			goto out;
+
+		data = er32(LEDCTL);
+		ret_val = e1000_write_phy_reg_hv_locked(hw, HV_LED_CONFIG,
+							(u16)data);
+		if (ret_val)