xircom: Move the Xircom driver

Move the Xircom driver into drivers/net/ethernet/xircom/ and
make the necessary Kconfig and Makefile changes.

CC: <psheer@icon.co.za>
CC: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

3 files changed, 1848 insertions, 0 deletions

diff --git a/drivers/net/ethernet/xircom/Kconfig b/drivers/net/ethernet/xircom/Kconfig
new file mode 100644
index 000000000000..3d64e58e3f8b
--- /dev/null
+++ b/drivers/net/ethernet/xircom/Kconfig
@@ -0,0 +1,30 @@
+#
+# Xircom network device configuration
+#
+
+config NET_VENDOR_XIRCOM
+	bool "Xircom devices"
+	depends on PCMCIA
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Xircom cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_XIRCOM
+
+config PCMCIA_XIRC2PS
+	tristate "Xircom 16-bit PCMCIA support"
+	depends on PCMCIA
+	---help---
+	  Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
+	  Ethernet or Fast Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called xirc2ps_cs.  If unsure, say N.
+
+endif # NET_VENDOR_XIRCOM
diff --git a/drivers/net/ethernet/xircom/Makefile b/drivers/net/ethernet/xircom/Makefile
new file mode 100644
index 000000000000..3b7aebd8b849
--- /dev/null
+++ b/drivers/net/ethernet/xircom/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Xircom network device drivers.
+#
+
+obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o
diff --git a/drivers/net/ethernet/xircom/xirc2ps_cs.c b/drivers/net/ethernet/xircom/xirc2ps_cs.c
new file mode 100644
index 000000000000..e33b190d716f
--- /dev/null
+++ b/drivers/net/ethernet/xircom/xirc2ps_cs.c
@@ -0,0 +1,1813 @@
+/* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03)
+ * Xircom CreditCard Ethernet Adapter IIps driver
+ * Xircom Realport 10/100 (RE-100) driver 
+ *
+ * This driver supports various Xircom CreditCard Ethernet adapters
+ * including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56,
+ * CE3-100, CE3B, RE-100, REM10BT, and REM56G-100.
+ *
+ * 2000-09-24 <psheer@icon.co.za> The Xircom CE3B-100 may not
+ * autodetect the media properly. In this case use the
+ * if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options
+ * to force the media type.
+ * 
+ * Written originally by Werner Koch based on David Hinds' skeleton of the
+ * PCMCIA driver.
+ *
+ * Copyright (c) 1997,1998 Werner Koch (dd9jn)
+ *
+ * This driver is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * It is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ *
+ *
+ * ALTERNATIVELY, this driver may be distributed under the terms of
+ * the following license, in which case the provisions of this license
+ * are required INSTEAD OF the GNU General Public License.  (This clause
+ * is necessary due to a potential bad interaction between the GPL and
+ * the restrictions contained in a BSD-style copyright.)
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, and the entire permission notice in its entirety,
+ *    including the disclaimer of warranties.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote
+ *    products derived from this software without specific prior
+ *    written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/bitops.h>
+#include <linux/mii.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ciscode.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+#ifndef MANFID_COMPAQ
+  #define MANFID_COMPAQ 	   0x0138
+  #define MANFID_COMPAQ2	   0x0183  /* is this correct? */
+#endif
+
+#include <pcmcia/ds.h>
+
+/* Time in jiffies before concluding Tx hung */
+#define TX_TIMEOUT	((400*HZ)/1000)
+
+/****************
+ * Some constants used to access the hardware
+ */
+
+/* Register offsets and value constans */
+#define XIRCREG_CR  0	/* Command register (wr) */
+enum xirc_cr {
+    TransmitPacket = 0x01,
+    SoftReset = 0x02,
+    EnableIntr = 0x04,
+    ForceIntr  = 0x08,
+    ClearTxFIFO = 0x10,
+    ClearRxOvrun = 0x20,
+    RestartTx	 = 0x40
+};
+#define XIRCREG_ESR 0	/* Ethernet status register (rd) */
+enum xirc_esr {
+    FullPktRcvd = 0x01, /* full packet in receive buffer */
+    PktRejected = 0x04, /* a packet has been rejected */
+    TxPktPend = 0x08,	/* TX Packet Pending */
+    IncorPolarity = 0x10,
+    MediaSelect = 0x20	/* set if TP, clear if AUI */
+};
+#define XIRCREG_PR  1	/* Page Register select */
+#define XIRCREG_EDP 4	/* Ethernet Data Port Register */
+#define XIRCREG_ISR 6	/* Ethernet Interrupt Status Register */
+enum xirc_isr {
+    TxBufOvr = 0x01,	/* TX Buffer Overflow */
+    PktTxed  = 0x02,	/* Packet Transmitted */
+    MACIntr  = 0x04,	/* MAC Interrupt occurred */
+    TxResGrant = 0x08,	/* Tx Reservation Granted */
+    RxFullPkt = 0x20,	/* Rx Full Packet */
+    RxPktRej  = 0x40,	/* Rx Packet Rejected */
+    ForcedIntr= 0x80	/* Forced Interrupt */
+};
+#define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/
+#define XIRCREG1_IMR1 13
+#define XIRCREG0_TSO  8  /* Transmit Space Open Register (on page 0)*/
+#define XIRCREG0_TRS  10 /* Transmit reservation Size Register (page 0)*/
+#define XIRCREG0_DO   12 /* Data Offset Register (page 0) (wr) */
+#define XIRCREG0_RSR  12 /* Receive Status Register (page 0) (rd) */
+enum xirc_rsr {
+    PhyPkt = 0x01,	/* set:physical packet, clear: multicast packet */
+    BrdcstPkt = 0x02,	/* set if it is a broadcast packet */
+    PktTooLong = 0x04,	/* set if packet length > 1518 */
+    AlignErr = 0x10,	/* incorrect CRC and last octet not complete */
+    CRCErr = 0x20,	/* incorrect CRC and last octet is complete */
+    PktRxOk = 0x80	/* received ok */
+};
+#define XIRCREG0_PTR 13 /* packets transmitted register (rd) */
+#define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */
+#define XIRCREG1_ECR 14 /* ethernet configurationn register */
+enum xirc_ecr {
+    FullDuplex = 0x04,	/* enable full duplex mode */
+    LongTPMode = 0x08,	/* adjust for longer lengths of TP cable */
+    DisablePolCor = 0x10,/* disable auto polarity correction */
+    DisableLinkPulse = 0x20, /* disable link pulse generation */
+    DisableAutoTx = 0x40, /* disable auto-transmit */
+};
+#define XIRCREG2_RBS 8	/* receive buffer start register */
+#define XIRCREG2_LED 10 /* LED Configuration register */
+/* values for the leds:    Bits 2-0 for led 1
+ *  0 disabled		   Bits 5-3 for led 2
+ *  1 collision
+ *  2 noncollision
+ *  3 link_detected
+ *  4 incor_polarity
+ *  5 jabber
+ *  6 auto_assertion
+ *  7 rx_tx_activity
+ */
+#define XIRCREG2_MSR 12 /* Mohawk specific register */
+
+#define XIRCREG4_GPR0 8 /* General Purpose Register 0 */
+#define XIRCREG4_GPR1 9 /* General Purpose Register 1 */
+#define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/
+#define XIRCREG4_BOV 10 /* Bonding Version Register */
+#define XIRCREG4_LMA 12 /* Local Memory Address Register */
+#define XIRCREG4_LMD 14 /* Local Memory Data Port */
+/* MAC register can only by accessed with 8 bit operations */
+#define XIRCREG40_CMD0 8    /* Command Register (wr) */
+enum xirc_cmd { 	    /* Commands */
+    Transmit = 0x01,
+    EnableRecv = 0x04,
+    DisableRecv = 0x08,
+    Abort = 0x10,
+    Online = 0x20,
+    IntrAck = 0x40,
+    Offline = 0x80
+};
+#define XIRCREG5_RHSA0	10  /* Rx Host Start Address */
+#define XIRCREG40_RXST0 9   /* Receive Status Register */
+#define XIRCREG40_TXST0 11  /* Transmit Status Register 0 */
+#define XIRCREG40_TXST1 12  /* Transmit Status Register 10 */
+#define XIRCREG40_RMASK0 13  /* Receive Mask Register */
+#define XIRCREG40_TMASK0 14  /* Transmit Mask Register 0 */
+#define XIRCREG40_TMASK1 15  /* Transmit Mask Register 0 */
+#define XIRCREG42_SWC0	8   /* Software Configuration 0 */
+#define XIRCREG42_SWC1	9   /* Software Configuration 1 */
+#define XIRCREG42_BOC	10  /* Back-Off Configuration */
+#define XIRCREG44_TDR0	8   /* Time Domain Reflectometry 0 */
+#define XIRCREG44_TDR1	9   /* Time Domain Reflectometry 1 */
+#define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */
+#define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */
+#define XIRCREG45_REV	 15 /* Revision Register (rd) */
+#define XIRCREG50_IA	8   /* Individual Address (8-13) */
+
+static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
+
+/* card types */
+#define XIR_UNKNOWN  0	/* unknown: not supported */
+#define XIR_CE	     1	/* (prodid 1) different hardware: not supported */
+#define XIR_CE2      2	/* (prodid 2) */
+#define XIR_CE3      3	/* (prodid 3) */
+#define XIR_CEM      4	/* (prodid 1) different hardware: not supported */
+#define XIR_CEM2     5	/* (prodid 2) */
+#define XIR_CEM3     6	/* (prodid 3) */
+#define XIR_CEM33    7	/* (prodid 4) */
+#define XIR_CEM56M   8	/* (prodid 5) */
+#define XIR_CEM56    9	/* (prodid 6) */
+#define XIR_CM28    10	/* (prodid 3) modem only: not supported here */
+#define XIR_CM33    11	/* (prodid 4) modem only: not supported here */
+#define XIR_CM56    12	/* (prodid 5) modem only: not supported here */
+#define XIR_CG	    13	/* (prodid 1) GSM modem only: not supported */
+#define XIR_CBE     14	/* (prodid 1) cardbus ethernet: not supported */
+/*====================================================================*/
+
+/* Module parameters */
+
+MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver");
+MODULE_LICENSE("Dual MPL/GPL");
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
+
+INT_MODULE_PARM(if_port,	0);
+INT_MODULE_PARM(full_duplex,	0);
+INT_MODULE_PARM(do_sound, 	1);
+INT_MODULE_PARM(lockup_hack,	0);  /* anti lockup hack */
+
+/*====================================================================*/
+
+/* We do not process more than these number of bytes during one
+ * interrupt. (Of course we receive complete packets, so this is not
+ * an exact value).
+ * Something between 2000..22000; first value gives best interrupt latency,
+ * the second enables the usage of the complete on-chip buffer. We use the
+ * high value as the initial value.
+ */
+static unsigned maxrx_bytes = 22000;
+
+/* MII management prototypes */
+static void mii_idle(unsigned int ioaddr);
+static void mii_putbit(unsigned int ioaddr, unsigned data);
+static int  mii_getbit(unsigned int ioaddr);
+static void mii_wbits(unsigned int ioaddr, unsigned data, int len);
+static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg);
+static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg,
+		   unsigned data, int len);
+
+static int has_ce2_string(struct pcmcia_device * link);
+static int xirc2ps_config(struct pcmcia_device * link);
+static void xirc2ps_release(struct pcmcia_device * link);
+static void xirc2ps_detach(struct pcmcia_device *p_dev);
+
+static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id);
+
+typedef struct local_info_t {
+	struct net_device	*dev;
+	struct pcmcia_device	*p_dev;
+
+    int card_type;
+    int probe_port;
+    int silicon; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */
+    int mohawk;  /* a CE3 type card */
+    int dingo;	 /* a CEM56 type card */
+    int new_mii; /* has full 10baseT/100baseT MII */
+    int modem;	 /* is a multi function card (i.e with a modem) */
+    void __iomem *dingo_ccr; /* only used for CEM56 cards */
+    unsigned last_ptr_value; /* last packets transmitted value */
+    const char *manf_str;
+    struct work_struct tx_timeout_task;
+} local_info_t;
+
+/****************
+ * Some more prototypes
+ */
+static netdev_tx_t do_start_xmit(struct sk_buff *skb,
+				       struct net_device *dev);
+static void xirc_tx_timeout(struct net_device *dev);
+static void xirc2ps_tx_timeout_task(struct work_struct *work);
+static void set_addresses(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static int set_card_type(struct pcmcia_device *link);
+static int do_config(struct net_device *dev, struct ifmap *map);
+static int do_open(struct net_device *dev);
+static int do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static const struct ethtool_ops netdev_ethtool_ops;
+static void hardreset(struct net_device *dev);
+static void do_reset(struct net_device *dev, int full);
+static int init_mii(struct net_device *dev);
+static void do_powerdown(struct net_device *dev);
+static int do_stop(struct net_device *dev);
+
+/*=============== Helper functions =========================*/
+#define SelectPage(pgnr)   outb((pgnr), ioaddr + XIRCREG_PR)
+#define GetByte(reg)	   ((unsigned)inb(ioaddr + (reg)))
+#define GetWord(reg)	   ((unsigned)inw(ioaddr + (reg)))
+#define PutByte(reg,value) outb((value), ioaddr+(reg))
+#define PutWord(reg,value) outw((value), ioaddr+(reg))
+
+/*====== Functions used for debugging =================================*/
+#if 0 /* reading regs may change system status */
+static void
+PrintRegisters(struct net_device *dev)
+{
+    unsigned int ioaddr = dev->base_addr;
+
+    if (pc_debug > 1) {
+	int i, page;
+
+	printk(KERN_DEBUG pr_fmt("Register  common: "));
+	for (i = 0; i < 8; i++)
+	    pr_cont(" %2.2x", GetByte(i));
+	pr_cont("\n");
+	for (page = 0; page <= 8; page++) {
+	    printk(KERN_DEBUG pr_fmt("Register page %2x: "), page);
+	    SelectPage(page);
+	    for (i = 8; i < 16; i++)
+		pr_cont(" %2.2x", GetByte(i));
+	    pr_cont("\n");
+	}
+	for (page=0x40 ; page <= 0x5f; page++) {
+		if (page == 0x43 || (page >= 0x46 && page <= 0x4f) ||
+		    (page >= 0x51 && page <=0x5e))
+			continue;
+	    printk(KERN_DEBUG pr_fmt("Register page %2x: "), page);
+	    SelectPage(page);
+	    for (i = 8; i < 16; i++)
+		pr_cont(" %2.2x", GetByte(i));
+	    pr_cont("\n");
+	}
+    }
+}
+#endif /* 0 */
+
+/*============== MII Management functions ===============*/
+
+/****************
+ * Turn around for read
+ */
+static void
+mii_idle(unsigned int ioaddr)
+{
+    PutByte(XIRCREG2_GPR2, 0x04|0); /* drive MDCK low */
+    udelay(1);
+    PutByte(XIRCREG2_GPR2, 0x04|1); /* and drive MDCK high */
+    udelay(1);
+}
+
+/****************
+ * Write a bit to MDI/O
+ */
+static void
+mii_putbit(unsigned int ioaddr, unsigned data)
+{
+  #if 1
+    if (data) {
+	PutByte(XIRCREG2_GPR2, 0x0c|2|0); /* set MDIO */
+	udelay(1);
+	PutByte(XIRCREG2_GPR2, 0x0c|2|1); /* and drive MDCK high */
+	udelay(1);
+    } else {
+	PutByte(XIRCREG2_GPR2, 0x0c|0|0); /* clear MDIO */
+	udelay(1);
+	PutByte(XIRCREG2_GPR2, 0x0c|0|1); /* and drive MDCK high */
+	udelay(1);
+    }
+  #else
+    if (data) {
+	PutWord(XIRCREG2_GPR2-1, 0x0e0e);
+	udelay(1);
+	PutWord(XIRCREG2_GPR2-1, 0x0f0f);
+	udelay(1);
+    } else {
+	PutWord(XIRCREG2_GPR2-1, 0x0c0c);
+	udelay(1);
+	PutWord(XIRCREG2_GPR2-1, 0x0d0d);
+	udelay(1);
+    }
+  #endif
+}
+
+/****************
+ * Get a bit from MDI/O
+ */
+static int
+mii_getbit(unsigned int ioaddr)
+{
+    unsigned d;
+
+    PutByte(XIRCREG2_GPR2, 4|0); /* drive MDCK low */
+    udelay(1);
+    d = GetByte(XIRCREG2_GPR2); /* read MDIO */
+    PutByte(XIRCREG2_GPR2, 4|1); /* drive MDCK high again */
+    udelay(1);
+    return d & 0x20; /* read MDIO */
+}
+
+static void
+mii_wbits(unsigned int ioaddr, unsigned data, int len)
+{
+    unsigned m = 1 << (len-1);
+    for (; m; m >>= 1)
+	mii_putbit(ioaddr, data & m);
+}
+
+static unsigned
+mii_rd(unsigned int ioaddr,	u_char phyaddr, u_char phyreg)
+{
+    int i;
+    unsigned data=0, m;
+
+    SelectPage(2);
+    for (i=0; i < 32; i++)		/* 32 bit preamble */
+	mii_putbit(ioaddr, 1);
+    mii_wbits(ioaddr, 0x06, 4); 	/* Start and opcode for read */
+    mii_wbits(ioaddr, phyaddr, 5);	/* PHY address to be accessed */
+    mii_wbits(ioaddr, phyreg, 5);	/* PHY register to read */
+    mii_idle(ioaddr);			/* turn around */
+    mii_getbit(ioaddr);
+
+    for (m = 1<<15; m; m >>= 1)
+	if (mii_getbit(ioaddr))
+	    data |= m;
+    mii_idle(ioaddr);
+    return data;
+}
+
+static void
+mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data,
+       int len)
+{
+    int i;
+
+    SelectPage(2);
+    for (i=0; i < 32; i++)		/* 32 bit preamble */
+	mii_putbit(ioaddr, 1);
+    mii_wbits(ioaddr, 0x05, 4); 	/* Start and opcode for write */
+    mii_wbits(ioaddr, phyaddr, 5);	/* PHY address to be accessed */
+    mii_wbits(ioaddr, phyreg, 5);	/* PHY Register to write */
+    mii_putbit(ioaddr, 1);		/* turn around */
+    mii_putbit(ioaddr, 0);
+    mii_wbits(ioaddr, data, len);	/* And write the data */
+    mii_idle(ioaddr);
+}
+
+/*============= Main bulk of functions	=========================*/
+
+static const struct net_device_ops netdev_ops = {
+	.ndo_open		= do_open,
+	.ndo_stop		= do_stop,
+	.ndo_start_xmit		= do_start_xmit,
+	.ndo_tx_timeout 	= xirc_tx_timeout,
+	.ndo_set_config		= do_config,
+	.ndo_do_ioctl		= do_ioctl,
+	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static int
+xirc2ps_probe(struct pcmcia_device *link)
+{
+    struct net_device *dev;
+    local_info_t *local;
+
+    dev_dbg(&link->dev, "attach()\n");
+
+    /* Allocate the device structure */
+    dev = alloc_etherdev(sizeof(local_info_t));
+    if (!dev)
+	    return -ENOMEM;
+    local = netdev_priv(dev);
+    local->dev = dev;
+    local->p_dev = link;
+    link->priv = dev;
+
+    /* General socket configuration */
+    link->config_index = 1;
+
+    /* Fill in card specific entries */
+    dev->netdev_ops = &netdev_ops;
+    dev->ethtool_ops = &netdev_ethtool_ops;
+    dev->watchdog_timeo = TX_TIMEOUT;
+    INIT_WORK(&local->tx_timeout_task, xirc2ps_tx_timeout_task);
+
+    return xirc2ps_config(link);
+} /* xirc2ps_attach */
+
+static void
+xirc2ps_detach(struct pcmcia_device *link)
+{
+    struct net_device *dev = link->priv;
+
+    dev_dbg(&link->dev, "detach\n");
+
+    unregister_netdev(dev);
+
+    xirc2ps_release(link);
+
+    free_netdev(dev);
+} /* xirc2ps_detach */
+
+/****************
+ * Detect the type of the card. s is the buffer with the data of tuple 0x20
+ * Returns: 0 := not supported
+ *		       mediaid=11 and prodid=47
+ * Media-Id bits:
+ *  Ethernet	    0x01
+ *  Tokenring	    0x02
+ *  Arcnet	    0x04
+ *  Wireless	    0x08
+ *  Modem	    0x10
+ *  GSM only	    0x20
+ * Prod-Id bits:
+ *  Pocket	    0x10
+ *  External	    0x20
+ *  Creditcard	    0x40
+ *  Cardbus	    0x80
+ *
+ */
+static int
+set_card_type(struct pcmcia_device *link)
+{
+    struct net_device *dev = link->priv;
+    local_info_t *local = netdev_priv(dev);
+    u8 *buf;
+    unsigned int cisrev, mediaid, prodid;
+    size_t len;
+
+    len = pcmcia_get_tuple(link, CISTPL_MANFID, &buf);
+    if (len < 5) {
+	    dev_err(&link->dev, "invalid CIS -- sorry\n");
+	    return 0;
+    }
+
+    cisrev = buf[2];
+    mediaid = buf[3];
+    prodid = buf[4];
+
+    dev_dbg(&link->dev, "cisrev=%02x mediaid=%02x prodid=%02x\n",
+	  cisrev, mediaid, prodid);
+
+    local->mohawk = 0;
+    local->dingo = 0;
+    local->modem = 0;
+    local->card_type = XIR_UNKNOWN;
+    if (!(prodid & 0x40)) {
+	pr_notice("Oops: Not a creditcard\n");
+	return 0;
+    }
+    if (!(mediaid & 0x01)) {
+	pr_notice("Not an Ethernet card\n");
+	return 0;
+    }
+    if (mediaid & 0x10) {
+	local->modem = 1;
+	switch(prodid & 15) {
+	  case 1: local->card_type = XIR_CEM   ; break;
+	  case 2: local->card_type = XIR_CEM2  ; break;
+	  case 3: local->card_type = XIR_CEM3  ; break;
+	  case 4: local->card_type = XIR_CEM33 ; break;
+	  case 5: local->card_type = XIR_CEM56M;
+		  local->mohawk = 1;
+		  break;
+	  case 6:
+	  case 7: /* 7 is the RealPort 10/56 */
+		  local->card_type = XIR_CEM56 ;
+		  local->mohawk = 1;
+		  local->dingo = 1;
+		  break;
+	}
+    } else {
+	switch(prodid & 15) {
+	  case 1: local->card_type = has_ce2_string(link)? XIR_CE2 : XIR_CE ;
+		  break;
+	  case 2: local->card_type = XIR_CE2; break;
+	  case 3: local->card_type = XIR_CE3;
+		  local->mohawk = 1;
+		  break;
+	}
+    }
+    if (local->card_type == XIR_CE || local->card_type == XIR_CEM) {
+	pr_notice("Sorry, this is an old CE card\n");
+	return 0;
+    }
+    if (local->card_type == XIR_UNKNOWN)
+	pr_notice("unknown card (mediaid=%02x prodid=%02x)\n", mediaid, prodid);
+
+    return 1;
+}
+
+/****************
+ * There are some CE2 cards out which claim to be a CE card.
+ * This function looks for a "CE2" in the 3rd version field.
+ * Returns: true if this is a CE2
+ */
+static int
+has_ce2_string(struct pcmcia_device * p_dev)
+{
+	if (p_dev->prod_id[2] && strstr(p_dev->prod_id[2], "CE2"))
+		return 1;
+	return 0;
+}
+
+static int
+xirc2ps_config_modem(struct pcmcia_device *p_dev, void *priv_data)
+{
+	unsigned int ioaddr;
+
+	if ((p_dev->resource[0]->start & 0xf) == 8)
+		return -ENODEV;
+
+	p_dev->resource[0]->end = 16;
+	p_dev->resource[1]->end = 8;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+	p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+	p_dev->io_lines = 10;
+
+	p_dev->resource[1]->start = p_dev->resource[0]->start;
+	for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
+		p_dev->resource[0]->start = ioaddr;
+		if (!pcmcia_request_io(p_dev))
+			return 0;
+	}
+	return -ENODEV;
+}
+
+static int
+xirc2ps_config_check(struct pcmcia_device *p_dev, void *priv_data)
+{
+	int *pass = priv_data;
+	resource_size_t tmp = p_dev->resource[1]->start;
+
+	tmp += (*pass ? (p_dev->config_index & 0x20 ? -24 : 8)
+		: (p_dev->config_index & 0x20 ?   8 : -24));
+
+	if ((p_dev->resource[0]->start & 0xf) == 8)
+		return -ENODEV;
+
+	p_dev->resource[0]->end = 18;
+	p_dev->resource[1]->end = 8;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+	p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+	p_dev->io_lines = 10;
+
+	p_dev->resource[1]->start = p_dev->resource[0]->start;
+	p_dev->resource[0]->start = tmp;
+	return pcmcia_request_io(p_dev);
+}
+
+
+static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev,
+			     tuple_t *tuple,
+			     void *priv)
+{
+	struct net_device *dev = priv;
+	int i;
+
+	if (tuple->TupleDataLen != 13)
+		return -EINVAL;
+	if ((tuple->TupleData[0] != 2) || (tuple->TupleData[1] != 1) ||
+		(tuple->TupleData[2] != 6))
+		return -EINVAL;
+	/* another try	(James Lehmer's CE2 version 4.1)*/
+	for (i = 2; i < 6; i++)
+		dev->dev_addr[i] = tuple->TupleData[i+2];
+	return 0;
+};
+
+
+static int
+xirc2ps_config(struct pcmcia_device * link)
+{
+    struct net_device *dev = link->priv;
+    local_info_t *local = netdev_priv(dev);
+    unsigned int ioaddr;
+    int err;
+    u8 *buf;
+    size_t len;
+
+    local->dingo_ccr = NULL;
+
+    dev_dbg(&link->dev, "config\n");
+
+    /* Is this a valid	card */
+    if (link->has_manf_id == 0) {
+	pr_notice("manfid not found in CIS\n");
+	goto failure;
+    }
+
+    switch (link->manf_id) {
+      case MANFID_XIRCOM:
+	local->manf_str = "Xircom";
+	break;
+      case MANFID_ACCTON:
+	local->manf_str = "Accton";
+	break;
+      case MANFID_COMPAQ:
+      case MANFID_COMPAQ2:
+	local->manf_str = "Compaq";
+	break;
+      case MANFID_INTEL:
+	local->manf_str = "Intel";
+	break;
+      case MANFID_TOSHIBA:
+	local->manf_str = "Toshiba";
+	break;
+      default:
+	pr_notice("Unknown Card Manufacturer ID: 0x%04x\n",
+		  (unsigned)link->manf_id);
+	goto failure;
+    }
+    dev_dbg(&link->dev, "found %s card\n", local->manf_str);
+
+    if (!set_card_type(link)) {
+	pr_notice("this card is not supported\n");
+	goto failure;
+    }
+
+    /* get the ethernet address from the CIS */
+    err = pcmcia_get_mac_from_cis(link, dev);
+
+    /* not found: try to get the node-id from tuple 0x89 */
+    if (err) {
+	    len = pcmcia_get_tuple(link, 0x89, &buf);
+	    /* data layout looks like tuple 0x22 */
+	    if (buf && len == 8) {
+		    if (*buf == CISTPL_FUNCE_LAN_NODE_ID) {
+			    int i;
+			    for (i = 2; i < 6; i++)
+				    dev->dev_addr[i] = buf[i+2];
+		    } else
+			    err = -1;
+	    }
+	    kfree(buf);
+    }
+
+    if (err)
+	err = pcmcia_loop_tuple(link, CISTPL_FUNCE, pcmcia_get_mac_ce, dev);
+
+    if (err) {
+	pr_notice("node-id not found in CIS\n");
+	goto failure;
+    }
+
+    if (local->modem) {
+	int pass;
+	link->config_flags |= CONF_AUTO_SET_IO;
+
+	if (local->dingo) {
+	    /* Take the Modem IO port from the CIS and scan for a free
+	     * Ethernet port */
+	    if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
+		    goto port_found;
+	} else {
+	    /* We do 2 passes here: The first one uses the regular mapping and
+	     * the second tries again, thereby considering that the 32 ports are
+	     * mirrored every 32 bytes. Actually we use a mirrored port for
+	     * the Mako if (on the first pass) the COR bit 5 is set.
+	     */
+	    for (pass=0; pass < 2; pass++)
+		    if (!pcmcia_loop_config(link, xirc2ps_config_check,
+						    &pass))
+			    goto port_found;
+	    /* if special option:
+	     * try to configure as Ethernet only.
+	     * .... */
+	}
+	pr_notice("no ports available\n");
+    } else {
+	link->io_lines = 10;
+	link->resource[0]->end = 16;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+	for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
+	    link->resource[0]->start = ioaddr;
+	    if (!(err = pcmcia_request_io(link)))
+		goto port_found;
+	}
+	link->resource[0]->start = 0; /* let CS decide */
+	if ((err = pcmcia_request_io(link)))
+	    goto config_error;
+    }
+  port_found:
+    if (err)
+	 goto config_error;
+
+    /****************
+     * Now allocate an interrupt line.	Note that this does not
+     * actually assign a handler to the interrupt.
+     */
+    if ((err=pcmcia_request_irq(link, xirc2ps_interrupt)))
+	goto config_error;
+
+    link->config_flags |= CONF_ENABLE_IRQ;
+    if (do_sound)
+	    link->config_flags |= CONF_ENABLE_SPKR;
+
+    if ((err = pcmcia_enable_device(link)))
+	goto config_error;
+
+    if (local->dingo) {
+	/* Reset the modem's BAR to the correct value
+	 * This is necessary because in the RequestConfiguration call,
+	 * the base address of the ethernet port (BasePort1) is written
+	 * to the BAR registers of the modem.
+	 */
+	err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8)
+				link->resource[1]->start & 0xff);
+	if (err)
+	    goto config_error;
+
+	err = pcmcia_write_config_byte(link, CISREG_IOBASE_1,
+				(link->resource[1]->start >> 8) & 0xff);
+	if (err)
+	    goto config_error;
+
+	/* There is no config entry for the Ethernet part which
+	 * is at 0x0800. So we allocate a window into the attribute
+	 * memory and write direct to the CIS registers
+	 */
+	link->resource[2]->flags = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM |
+					WIN_ENABLE;
+	link->resource[2]->start = link->resource[2]->end = 0;
+	if ((err = pcmcia_request_window(link, link->resource[2], 0)))
+	    goto config_error;
+
+	local->dingo_ccr = ioremap(link->resource[2]->start, 0x1000) + 0x0800;
+	if ((err = pcmcia_map_mem_page(link, link->resource[2], 0)))
+	    goto config_error;
+
+	/* Setup the CCRs; there are no infos in the CIS about the Ethernet
+	 * part.
+	 */
+	writeb(0x47, local->dingo_ccr + CISREG_COR);
+	ioaddr = link->resource[0]->start;
+	writeb(ioaddr & 0xff	  , local->dingo_ccr + CISREG_IOBASE_0);
+	writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1);
+
+      #if 0
+	{
+	    u_char tmp;
+	    pr_info("ECOR:");
+	    for (i=0; i < 7; i++) {
+		tmp = readb(local->dingo_ccr + i*2);
+		pr_cont(" %02x", tmp);
+	    }
+	    pr_cont("\n");
+	    pr_info("DCOR:");
+	    for (i=0; i < 4; i++) {
+		tmp = readb(local->dingo_ccr + 0x20 + i*2);
+		pr_cont(" %02x", tmp);
+	    }
+	    pr_cont("\n");
+	    pr_info("SCOR:");
+	    for (i=0; i < 10; i++) {
+		tmp = readb(local->dingo_ccr + 0x40 + i*2);
+		pr_cont(" %02x", tmp);
+	    }
+	    pr_cont("\n");
+	}
+      #endif
+
+	writeb(0x01, local->dingo_ccr + 0x20);
+	writeb(0x0c, local->dingo_ccr + 0x22);
+	writeb(0x00, local->dingo_ccr + 0x24);
+	writeb(0x00, local->dingo_ccr + 0x26);
+	writeb(0x00, local->dingo_ccr + 0x28);
+    }
+
+    /* The if_port symbol can be set when the module is loaded */
+    local->probe_port=0;
+    if (!if_port) {
+	local->probe_port = dev->if_port = 1;
+    } else if ((if_port >= 1 && if_port <= 2) ||
+	       (local->mohawk && if_port==4))
+	dev->if_port = if_port;
+    else
+	pr_notice("invalid if_port requested\n");
+
+    /* we can now register the device with the net subsystem */
+    dev->irq = link->irq;
+    dev->base_addr = link->resource[0]->start;
+
+    if (local->dingo)
+	do_reset(dev, 1); /* a kludge to make the cem56 work */
+
+    SET_NETDEV_DEV(dev, &link->dev);
+
+    if ((err=register_netdev(dev))) {
+	pr_notice("register_netdev() failed\n");
+	goto config_error;
+    }
+
+    /* give some infos about the hardware */
+    netdev_info(dev, "%s: port %#3lx, irq %d, hwaddr %pM\n",
+		local->manf_str, (u_long)dev->base_addr, (int)dev->irq,
+		dev->dev_addr);
+
+    return 0;
+
+  config_error:
+    xirc2ps_release(link);
+    return -ENODEV;
+
+  failure:
+    return -ENODEV;
+} /* xirc2ps_config */
+
+static void
+xirc2ps_release(struct pcmcia_device *link)
+{
+	dev_dbg(&link->dev, "release\n");
+
+	if (link->resource[2]->end) {
+		struct net_device *dev = link->priv;
+		local_info_t *local = netdev_priv(dev);
+		if (local->dingo)
+			iounmap(local->dingo_ccr - 0x0800);
+	}
+	pcmcia_disable_device(link);
+} /* xirc2ps_release */
+
+/*====================================================================*/
+
+
+static int xirc2ps_suspend(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	if (link->open) {
+		netif_device_detach(dev);
+		do_powerdown(dev);
+	}
+
+	return 0;
+}
+
+static int xirc2ps_resume(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	if (link->open) {
+		do_reset(dev,1);
+		netif_device_attach(dev);
+	}
+
+	return 0;
+}
+
+
+/*====================================================================*/
+
+/****************
+ * This is the Interrupt service ro