diff options
author | Gidon Studinski <gidons@codeaurora.org> | 2018-06-29 16:28:23 +0300 |
---|---|---|
committer | Kalle Valo <kvalo@codeaurora.org> | 2018-07-02 17:24:19 +0300 |
commit | 96c93589e2dfd43ad16b92e6677ceaf279ae5062 (patch) | |
tree | 304ec8d9e306a9bfaf5b2819f9cbee5f79aa12ec /drivers/net/wireless/ath | |
parent | 10590c6a07b6a84cc3224cfda481317deaf31565 (diff) | |
download | linux-96c93589e2dfd43ad16b92e6677ceaf279ae5062.tar.gz linux-96c93589e2dfd43ad16b92e6677ceaf279ae5062.tar.bz2 linux-96c93589e2dfd43ad16b92e6677ceaf279ae5062.zip |
wil6210: initialize TX and RX enhanced DMA rings
Enhanced DMA design includes the following rings:
- Single RX descriptor ring is used for all VIFs
- Multiple RX status rings are supported, to allow RSS
- TX descriptor ring is allocated per connection
- A single TX status ring is used for all TX descriptor rings
This patch initializes and frees the above descriptor and
status rings.
The RX SKBs are handled by a new entity of RX buffers manager,
which handles RX buffers, each one points to an allocated SKB.
During Rx completion processing, the driver extracts a buffer
ID which is used as an index to the buffers array.
After the SKB is freed the buffer is moved from the 'active'
list to the 'free' list, indicating it can be used for another
descriptor. During Rx refill, SKBs are allocated and attached
to 'free' buffers. Those buffers are attached to new descriptors
and moved to the 'active' list.
New debugfs entries were added to allow edma configuration:
Run the following command to configure the number of status rings:
echo NUM_OF_STATUS_RINGS > num_rx_status_rings
Run the following command to use extended RX status message for
additional debug fields from HW:
echo 0 > compressed_rx_status
Run the following command to control the size of the TX status ring:
echo TX_STATUS_RING_ORDER > tx_status_ring_order
The status ring size will be 1 << tx_status_ring_order
Run the following command to control the size of the RX status ring:
echo RX_STATUS_RING_ORDER > rx_status_ring_order
Due to HW constrains RX sring order should be bigger than RX ring order
The status ring size will be 1 << rx_status_ring_order
Run the following command to change the number of RX buffer IDs:
echo RX_BUFF_ID_COUNT > rx_buff_id_count
Signed-off-by: Gidon Studinski <gidons@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Diffstat (limited to 'drivers/net/wireless/ath')
-rw-r--r-- | drivers/net/wireless/ath/wil6210/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/wireless/ath/wil6210/debugfs.c | 59 | ||||
-rw-r--r-- | drivers/net/wireless/ath/wil6210/ethtool.c | 2 | ||||
-rw-r--r-- | drivers/net/wireless/ath/wil6210/interrupt.c | 21 | ||||
-rw-r--r-- | drivers/net/wireless/ath/wil6210/main.c | 81 | ||||
-rw-r--r-- | drivers/net/wireless/ath/wil6210/pcie_bus.c | 47 | ||||
-rw-r--r-- | drivers/net/wireless/ath/wil6210/txrx.c | 90 | ||||
-rw-r--r-- | drivers/net/wireless/ath/wil6210/txrx.h | 8 | ||||
-rw-r--r-- | drivers/net/wireless/ath/wil6210/txrx_edma.c | 719 | ||||
-rw-r--r-- | drivers/net/wireless/ath/wil6210/txrx_edma.h | 54 | ||||
-rw-r--r-- | drivers/net/wireless/ath/wil6210/wil6210.h | 62 | ||||
-rw-r--r-- | drivers/net/wireless/ath/wil6210/wmi.c | 316 | ||||
-rw-r--r-- | drivers/net/wireless/ath/wil6210/wmi.h | 166 |
13 files changed, 1513 insertions, 113 deletions
diff --git a/drivers/net/wireless/ath/wil6210/Makefile b/drivers/net/wireless/ath/wil6210/Makefile index 398edd2a7f2b..d3d61ae459e2 100644 --- a/drivers/net/wireless/ath/wil6210/Makefile +++ b/drivers/net/wireless/ath/wil6210/Makefile @@ -9,6 +9,7 @@ wil6210-$(CONFIG_WIL6210_DEBUGFS) += debugfs.o wil6210-y += wmi.o wil6210-y += interrupt.o wil6210-y += txrx.o +wil6210-y += txrx_edma.o wil6210-y += debug.o wil6210-y += rx_reorder.o wil6210-y += fw.o diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c index 55e03e9b49eb..212baf46393a 100644 --- a/drivers/net/wireless/ath/wil6210/debugfs.c +++ b/drivers/net/wireless/ath/wil6210/debugfs.c @@ -1761,6 +1761,60 @@ static const struct file_operations fops_suspend_stats = { .open = simple_open, }; +/*---------compressed_rx_status---------*/ +static ssize_t wil_compressed_rx_status_write(struct file *file, + const char __user *buf, + size_t len, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct wil6210_priv *wil = s->private; + int compressed_rx_status; + int rc; + + rc = kstrtoint_from_user(buf, len, 0, &compressed_rx_status); + if (rc) { + wil_err(wil, "Invalid argument\n"); + return rc; + } + + if (wil_has_active_ifaces(wil, true, false)) { + wil_err(wil, "cannot change edma config after iface is up\n"); + return -EPERM; + } + + wil_info(wil, "%sable compressed_rx_status\n", + compressed_rx_status ? "En" : "Dis"); + + wil->use_compressed_rx_status = compressed_rx_status; + + return len; +} + +static int +wil_compressed_rx_status_show(struct seq_file *s, void *data) +{ + struct wil6210_priv *wil = s->private; + + seq_printf(s, "%d\n", wil->use_compressed_rx_status); + + return 0; +} + +static int +wil_compressed_rx_status_seq_open(struct inode *inode, struct file *file) +{ + return single_open(file, wil_compressed_rx_status_show, + inode->i_private); +} + +static const struct file_operations fops_compressed_rx_status = { + .open = wil_compressed_rx_status_seq_open, + .release = single_release, + .read = seq_read, + .write = wil_compressed_rx_status_write, + .llseek = seq_lseek, +}; + /*----------------*/ static void wil6210_debugfs_init_blobs(struct wil6210_priv *wil, struct dentry *dbg) @@ -1814,6 +1868,7 @@ static const struct { {"fw_capabilities", 0444, &fops_fw_capabilities}, {"fw_version", 0444, &fops_fw_version}, {"suspend_stats", 0644, &fops_suspend_stats}, + {"compressed_rx_status", 0644, &fops_compressed_rx_status}, }; static void wil6210_debugfs_init_files(struct wil6210_priv *wil, @@ -1860,6 +1915,10 @@ static const struct dbg_off dbg_wil_off[] = { WIL_FIELD(abft_len, 0644, doff_u8), WIL_FIELD(wakeup_trigger, 0644, doff_u8), WIL_FIELD(ring_idle_trsh, 0644, doff_u32), + WIL_FIELD(num_rx_status_rings, 0644, doff_u8), + WIL_FIELD(rx_status_ring_order, 0644, doff_u32), + WIL_FIELD(tx_status_ring_order, 0644, doff_u32), + WIL_FIELD(rx_buff_id_count, 0644, doff_u32), {}, }; diff --git a/drivers/net/wireless/ath/wil6210/ethtool.c b/drivers/net/wireless/ath/wil6210/ethtool.c index e7ff41e623d2..a04c87ffd37b 100644 --- a/drivers/net/wireless/ath/wil6210/ethtool.c +++ b/drivers/net/wireless/ath/wil6210/ethtool.c @@ -101,7 +101,7 @@ static int wil_ethtoolops_set_coalesce(struct net_device *ndev, if (ret < 0) return ret; - wil_configure_interrupt_moderation(wil); + wil->txrx_ops.configure_interrupt_moderation(wil); wil_pm_runtime_put(wil); diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c index 84e9840c1752..311d48233165 100644 --- a/drivers/net/wireless/ath/wil6210/interrupt.c +++ b/drivers/net/wireless/ath/wil6210/interrupt.c @@ -186,6 +186,27 @@ void wil_unmask_irq(struct wil6210_priv *wil) wil6210_unmask_irq_misc(wil, true); } +void wil_configure_interrupt_moderation_edma(struct wil6210_priv *wil) +{ + u32 moderation; + + wil_s(wil, RGF_INT_GEN_IDLE_TIME_LIMIT, WIL_EDMA_IDLE_TIME_LIMIT_USEC); + + wil_s(wil, RGF_INT_GEN_TIME_UNIT_LIMIT, WIL_EDMA_TIME_UNIT_CLK_CYCLES); + + /* Update RX and TX moderation */ + moderation = wil->rx_max_burst_duration | + (WIL_EDMA_AGG_WATERMARK << WIL_EDMA_AGG_WATERMARK_POS); + wil_w(wil, RGF_INT_CTRL_INT_GEN_CFG_0, moderation); + wil_w(wil, RGF_INT_CTRL_INT_GEN_CFG_1, moderation); + + /* Treat special events as regular + * (set bit 0 to 0x1 and clear bits 1-8) + */ + wil_c(wil, RGF_INT_COUNT_ON_SPECIAL_EVT, 0x1FE); + wil_s(wil, RGF_INT_COUNT_ON_SPECIAL_EVT, 0x1); +} + void wil_configure_interrupt_moderation(struct wil6210_priv *wil) { struct wireless_dev *wdev = wil->main_ndev->ieee80211_ptr; diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index bfe628481e22..c820c86918f0 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -21,11 +21,13 @@ #include "wil6210.h" #include "txrx.h" +#include "txrx_edma.h" #include "wmi.h" #include "boot_loader.h" #define WAIT_FOR_HALP_VOTE_MS 100 #define WAIT_FOR_SCAN_ABORT_MS 1000 +#define WIL_DEFAULT_NUM_RX_STATUS_RINGS 1 bool debug_fw; /* = false; */ module_param(debug_fw, bool, 0444); @@ -160,6 +162,37 @@ void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src, } } +static void wil_ring_fini_tx(struct wil6210_priv *wil, int id) +{ + struct wil_ring *ring = &wil->ring_tx[id]; + struct wil_ring_tx_data *txdata = &wil->ring_tx_data[id]; + + lockdep_assert_held(&wil->mutex); + + if (!ring->va) + return; + + wil_dbg_misc(wil, "vring_fini_tx: id=%d\n", id); + + spin_lock_bh(&txdata->lock); + txdata->dot1x_open = false; + txdata->mid = U8_MAX; + txdata->enabled = 0; /* no Tx can be in progress or start anew */ + spin_unlock_bh(&txdata->lock); + /* napi_synchronize waits for completion of the current NAPI but will + * not prevent the next NAPI run. + * Add a memory barrier to guarantee that txdata->enabled is zeroed + * before napi_synchronize so that the next scheduled NAPI will not + * handle this vring + */ + wmb(); + /* make sure NAPI won't touch this vring */ + if (test_bit(wil_status_napi_en, wil->status)) + napi_synchronize(&wil->napi_tx); + + wil->txrx_ops.ring_fini_tx(wil, ring); +} + static void wil_disconnect_cid(struct wil6210_vif *vif, int cid, u16 reason_code, bool from_event) __acquires(&sta->tid_rx_lock) __releases(&sta->tid_rx_lock) @@ -456,15 +489,16 @@ static void wil_fw_error_worker(struct work_struct *work) static int wil_find_free_ring(struct wil6210_priv *wil) { int i; + int min_ring_id = wil_get_min_tx_ring_id(wil); - for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) { + for (i = min_ring_id; i < WIL6210_MAX_TX_RINGS; i++) { if (!wil->ring_tx[i].va) return i; } return -EINVAL; } -int wil_tx_init(struct wil6210_vif *vif, int cid) +int wil_ring_init_tx(struct wil6210_vif *vif, int cid) { struct wil6210_priv *wil = vif_to_wil(vif); int rc = -EINVAL, ringid; @@ -482,7 +516,8 @@ int wil_tx_init(struct wil6210_vif *vif, int cid) wil_dbg_wmi(wil, "Configure for connection CID %d MID %d ring %d\n", cid, vif->mid, ringid); - rc = wil_vring_init_tx(vif, ringid, 1 << tx_ring_order, cid, 0); + rc = wil->txrx_ops.ring_init_tx(vif, ringid, 1 << tx_ring_order, + cid, 0); if (rc) wil_err(wil, "init TX for CID %d MID %d vring %d failed\n", cid, vif->mid, ringid); @@ -504,7 +539,7 @@ int wil_bcast_init(struct wil6210_vif *vif) return ri; vif->bcast_ring = ri; - rc = wil_vring_init_bcast(vif, ri, 1 << bcast_ring_order); + rc = wil->txrx_ops.ring_init_bcast(vif, ri, 1 << bcast_ring_order); if (rc) vif->bcast_ring = -1; @@ -594,6 +629,22 @@ int wil_priv_init(struct wil6210_priv *wil) wil->reply_mid = U8_MAX; wil->max_vifs = 1; + /* edma configuration can be updated via debugfs before allocation */ + wil->num_rx_status_rings = WIL_DEFAULT_NUM_RX_STATUS_RINGS; + wil->use_compressed_rx_status = true; + wil->tx_status_ring_order = WIL_TX_SRING_SIZE_ORDER_DEFAULT; + + /* Rx status ring size should be bigger than the number of RX buffers + * in order to prevent backpressure on the status ring, which may + * cause HW freeze. + */ + wil->rx_status_ring_order = WIL_RX_SRING_SIZE_ORDER_DEFAULT; + /* Number of RX buffer IDs should be bigger than the RX descriptor + * ring size as in HW reorder flow, the HW can consume additional + * buffers before releasing the previous ones. + */ + wil->rx_buff_id_count = WIL_RX_BUFF_ARR_SIZE_DEFAULT; + return 0; out_wmi_wq: @@ -1312,7 +1363,8 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw) rc = wil_target_reset(wil, no_flash); wil6210_clear_irq(wil); wil_enable_irq(wil); - wil_rx_fini(wil); + wil->txrx_ops.rx_fini(wil); + wil->txrx_ops.tx_fini(wil); if (rc) { if (!no_flash) wil_bl_crash_info(wil, true); @@ -1365,7 +1417,6 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw) clear_bit(wil_status_resetting, wil->status); if (load_fw) { - wil_configure_interrupt_moderation(wil); wil_unmask_irq(wil); /* we just started MAC, wait for FW ready */ @@ -1380,6 +1431,8 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw) return rc; } + wil->txrx_ops.configure_interrupt_moderation(wil); + rc = wil_restore_vifs(wil); if (rc) { wil_err(wil, "failed to restore vifs, rc %d\n", rc); @@ -1434,8 +1487,12 @@ int __wil_up(struct wil6210_priv *wil) if (rc) return rc; - /* Rx VRING. After MAC and beacon */ - rc = wil_rx_init(wil, 1 << rx_ring_order); + /* Rx RING. After MAC and beacon */ + rc = wil->txrx_ops.rx_init(wil, 1 << rx_ring_order); + if (rc) + return rc; + + rc = wil->txrx_ops.tx_init(wil); if (rc) return rc; @@ -1596,3 +1653,11 @@ void wil_halp_unvote(struct wil6210_priv *wil) mutex_unlock(&wil->halp.lock); } + +void wil_init_txrx_ops(struct wil6210_priv *wil) +{ + if (wil->use_enhanced_dma_hw) + wil_init_txrx_ops_edma(wil); + else + wil_init_txrx_ops_legacy_dma(wil); +} diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c index 3a7e406d0311..c01c5348b7e0 100644 --- a/drivers/net/wireless/ath/wil6210/pcie_bus.c +++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c @@ -102,6 +102,7 @@ int wil_set_capabilities(struct wil6210_priv *wil) wil->rgf_fw_assert_code_addr = TALYN_RGF_FW_ASSERT_CODE; wil->rgf_ucode_assert_code_addr = TALYN_RGF_UCODE_ASSERT_CODE; set_bit(hw_capa_no_flash, wil->hw_capa); + wil->use_enhanced_dma_hw = true; break; default: wil_err(wil, "Unknown board hardware, chip_id 0x%08x, chip_revision 0x%08x\n", @@ -111,6 +112,8 @@ int wil_set_capabilities(struct wil6210_priv *wil) return -EINVAL; } + wil_init_txrx_ops(wil); + iccm_section = wil_find_fw_mapping("fw_code"); if (!iccm_section) { wil_err(wil, "fw_code section not found in fw_mapping\n"); @@ -266,8 +269,8 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id) .fw_recovery = wil_platform_rop_fw_recovery, }; u32 bar_size = pci_resource_len(pdev, 0); - int dma_addr_size[] = {48, 40, 32}; /* keep descending order */ - int i; + int dma_addr_size[] = {64, 48, 40, 32}; /* keep descending order */ + int i, start_idx; /* check HW */ dev_info(&pdev->dev, WIL_NAME @@ -302,24 +305,6 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto if_free; } /* rollback to err_plat */ - - /* device supports >32bit addresses */ - for (i = 0; i < ARRAY_SIZE(dma_addr_size); i++) { - rc = dma_set_mask_and_coherent(dev, - DMA_BIT_MASK(dma_addr_size[i])); - if (rc) { - dev_err(dev, "dma_set_mask_and_coherent(%d) failed: %d\n", - dma_addr_size[i], rc); - continue; - } - dev_info(dev, "using dma mask %d", dma_addr_size[i]); - wil->dma_addr_size = dma_addr_size[i]; - break; - } - - if (wil->dma_addr_size == 0) - goto err_plat; - rc = pci_enable_device(pdev); if (rc && pdev->msi_enabled == 0) { wil_err(wil, @@ -359,6 +344,28 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id) wil_err(wil, "wil_set_capabilities failed, rc %d\n", rc); goto err_iounmap; } + + /* device supports >32bit addresses. + * for legacy DMA start from 48 bit. + */ + start_idx = wil->use_enhanced_dma_hw ? 0 : 1; + + for (i = start_idx; i < ARRAY_SIZE(dma_addr_size); i++) { + rc = dma_set_mask_and_coherent(dev, + DMA_BIT_MASK(dma_addr_size[i])); + if (rc) { + dev_err(dev, "dma_set_mask_and_coherent(%d) failed: %d\n", + dma_addr_size[i], rc); + continue; + } + dev_info(dev, "using dma mask %d", dma_addr_size[i]); + wil->dma_addr_size = dma_addr_size[i]; + break; + } + + if (wil->dma_addr_size == 0) + goto err_iounmap; + wil6210_clear_irq(wil); /* FW should raise IRQ when ready */ diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index 55946dec5110..2a359e164e08 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -202,14 +202,13 @@ static void wil_txdesc_unmap(struct device *dev, struct vring_tx_desc *d, } } -static void wil_vring_free(struct wil6210_priv *wil, struct wil_ring *vring, - int tx) +static void wil_vring_free(struct wil6210_priv *wil, struct wil_ring *vring) { struct device *dev = wil_to_dev(wil); size_t sz = vring->size * sizeof(vring->va[0]); lockdep_assert_held(&wil->mutex); - if (tx) { + if (!vring->is_rx) { int vring_index = vring - wil->ring_tx; wil_dbg_misc(wil, "free Tx vring %d [%d] 0x%p:%pad 0x%p\n", @@ -226,7 +225,7 @@ static void wil_vring_free(struct wil6210_priv *wil, struct wil_ring *vring, u16 dmalen; struct wil_ctx *ctx; - if (tx) { + if (!vring->is_rx) { struct vring_tx_desc dd, *d = ⅆ volatile struct vring_tx_desc *_d = &vring->va[vring->swtail].tx.legacy; @@ -843,7 +842,7 @@ static void wil_rx_buf_len_init(struct wil6210_priv *wil) } } -int wil_rx_init(struct wil6210_priv *wil, u16 size) +static int wil_rx_init(struct wil6210_priv *wil, u16 size) { struct wil_ring *vring = &wil->ring_rx; int rc; @@ -858,6 +857,7 @@ int wil_rx_init(struct wil6210_priv *wil, u16 size) wil_rx_buf_len_init(wil); vring->size = size; + vring->is_rx = true; rc = wil_vring_alloc(wil, vring); if (rc) return rc; @@ -872,22 +872,22 @@ int wil_rx_init(struct wil6210_priv *wil, u16 size) return 0; err_free: - wil_vring_free(wil, vring, 0); + wil_vring_free(wil, vring); return rc; } -void wil_rx_fini(struct wil6210_priv *wil) +static void wil_rx_fini(struct wil6210_priv *wil) { struct wil_ring *vring = &wil->ring_rx; wil_dbg_misc(wil, "rx_fini\n"); if (vring->va) - wil_vring_free(wil, vring, 0); + wil_vring_free(wil, vring); } -static inline void wil_tx_data_init(struct wil_ring_tx_data *txdata) +void wil_tx_data_init(struct wil_ring_tx_data *txdata) { spin_lock_bh(&txdata->lock); txdata->dot1x_open = 0; @@ -903,8 +903,8 @@ static inline void wil_tx_data_init(struct wil_ring_tx_data *txdata) spin_unlock_bh(&txdata->lock); } -int wil_vring_init_tx(struct wil6210_vif *vif, int id, int size, - int cid, int tid) +static int wil_vring_init_tx(struct wil6210_vif *vif, int id, int size, + int cid, int tid) { struct wil6210_priv *wil = vif_to_wil(vif); int rc; @@ -948,6 +948,7 @@ int wil_vring_init_tx(struct wil6210_vif *vif, int id, int size, } wil_tx_data_init(txdata); + vring->is_rx = false; vring->size = size; rc = wil_vring_alloc(wil, vring); if (rc) @@ -987,7 +988,7 @@ int wil_vring_init_tx(struct wil6210_vif *vif, int id, int size, txdata->dot1x_open = false; txdata->enabled = 0; spin_unlock_bh(&txdata->lock); - wil_vring_free(wil, vring, 1); + wil_vring_free(wil, vring); wil->ring2cid_tid[id][0] = WIL6210_MAX_CID; wil->ring2cid_tid[id][1] = 0; @@ -1032,6 +1033,7 @@ int wil_vring_init_bcast(struct wil6210_vif *vif, int id, int size) } wil_tx_data_init(txdata); + vring->is_rx = false; vring->size = size; rc = wil_vring_alloc(wil, vring); if (rc) @@ -1069,43 +1071,12 @@ int wil_vring_init_bcast(struct wil6210_vif *vif, int id, int size) txdata->enabled = 0; txdata->dot1x_open = false; spin_unlock_bh(&txdata->lock); - wil_vring_free(wil, vring, 1); + wil_vring_free(wil, vring); out: return rc; } -void wil_ring_fini_tx(struct wil6210_priv *wil, int id) -{ - struct wil_ring *vring = &wil->ring_tx[id]; - struct wil_ring_tx_data *txdata = &wil->ring_tx_data[id]; - - lockdep_assert_held(&wil->mutex); - - if (!vring->va) - return; - - wil_dbg_misc(wil, "vring_fini_tx: id=%d\n", id); - - spin_lock_bh(&txdata->lock); - txdata->dot1x_open = false; - txdata->mid = U8_MAX; - txdata->enabled = 0; /* no Tx can be in progress or start anew */ - spin_unlock_bh(&txdata->lock); - /* napi_synchronize waits for completion of the current NAPI but will - * not prevent the next NAPI run. - * Add a memory barrier to guarantee that txdata->enabled is zeroed - * before napi_synchronize so that the next scheduled NAPI will not - * handle this vring - */ - wmb(); - /* make sure NAPI won't touch this vring */ - if (test_bit(wil_status_napi_en, wil->status)) - napi_synchronize(&wil->napi_tx); - - wil_vring_free(wil, vring, 1); -} - static struct wil_ring *wil_find_tx_ucast(struct wil6210_priv *wil, struct wil6210_vif *vif, struct sk_buff *skb) @@ -1113,12 +1084,13 @@ static struct wil_ring *wil_find_tx_ucast(struct wil6210_priv *wil, int i; struct ethhdr *eth = (void *)skb->data; int cid = wil_find_cid(wil, vif->mid, eth->h_dest); + int min_ring_id = wil_get_min_tx_ring_id(wil); if (cid < 0) return NULL; /* TODO: fix for multiple TID */ - for (i = 0; i < ARRAY_SIZE(wil->ring2cid_tid); i++) { + for (i = min_ring_id; i < ARRAY_SIZE(wil->ring2cid_tid); i++) { if (!wil->ring_tx_data[i].dot1x_open && skb->protocol != cpu_to_be16(ETH_P_PAE)) continue; @@ -1153,12 +1125,13 @@ static struct wil_ring *wil_find_tx_ring_sta(struct wil6210_priv *wil, int i; u8 cid; struct wil_ring_tx_data *txdata; + int min_ring_id = wil_get_min_tx_ring_id(wil); /* In the STA mode, it is expected to have only 1 VRING * for the AP we connected to. * find 1-st vring eligible for this skb and use it. */ - for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) { + for (i = min_ring_id; i < WIL6210_MAX_TX_RINGS; i++) { ring = &wil->ring_tx[i]; txdata = &wil->ring_tx_data[i]; if (!ring->va || !txdata->enabled || txdata->mid != vif->mid) @@ -1234,9 +1207,10 @@ static struct wil_ring *wil_find_tx_bcast_2(struct wil6210_priv *wil, struct ethhdr *eth = (void *)skb->data; char *src = eth->h_source; struct wil_ring_tx_data *txdata, *txdata2; + int min_ring_id = wil_get_min_tx_ring_id(wil); /* find 1-st vring eligible for data */ - for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) { + for (i = min_ring_id; i < WIL6210_MAX_TX_RINGS; i++) { v = &wil->ring_tx[i]; txdata = &wil->ring_tx_data[i]; if (!v->va || !txdata->enabled || txdata->mid != vif->mid) @@ -2201,3 +2175,25 @@ int wil_tx_complete(struct wil6210_vif *vif, int ringid) return done; } + +static inline int wil_tx_init(struct wil6210_priv *wil) +{ + return 0; +} + +static inline void wil_tx_fini(struct wil6210_priv *wil) {} + +void wil_init_txrx_ops_legacy_dma(struct wil6210_priv *wil) +{ + wil->txrx_ops.configure_interrupt_moderation = + wil_configure_interrupt_moderation; + /* TX ops */ + wil->txrx_ops.ring_init_tx = wil_vring_init_tx; + wil->txrx_ops.ring_fini_tx = wil_vring_free; + wil->txrx_ops.ring_init_bcast = wil_vring_init_bcast; + wil->txrx_ops.tx_init = wil_tx_init; + wil->txrx_ops.tx_fini = wil_tx_fini; + /* RX ops */ + wil->txrx_ops.rx_init = wil_rx_init; + wil->txrx_ops.rx_fini = wil_rx_fini; +} diff --git a/drivers/net/wireless/ath/wil6210/txrx.h b/drivers/net/wireless/ath/wil6210/txrx.h index 66217f815726..4e3781d9e7ec 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.h +++ b/drivers/net/wireless/ath/wil6210/txrx.h @@ -570,6 +570,12 @@ static inline int wil_ring_avail_tx(struct wil_ring *ring) return ring->size - wil_ring_used_tx(ring) - 1; } +static inline int wil_get_min_tx_ring_id(struct wil6210_priv *wil) +{ + /* In Enhanced DMA ring 0 is reserved for RX */ + return wil->use_enhanced_dma_hw ? 1 : 0; +} + void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev); void wil_rx_reorder(struct wil6210_priv *wil, struct sk_buff *skb); void wil_rx_bar(struct wil6210_priv *wil, struct wil6210_vif *vif, @@ -578,5 +584,7 @@ struct wil_tid_ampdu_rx *wil_tid_ampdu_rx_alloc(struct wil6210_priv *wil, int size, u16 ssn); void wil_tid_ampdu_rx_free(struct wil6210_priv *wil, struct wil_tid_ampdu_rx *r); +void wil_tx_data_init(struct wil_ring_tx_data *txdata); +void wil_init_txrx_ops_legacy_dma(struct wil6210_priv *wil); #endif /* WIL6210_TXRX_H */ diff --git a/drivers/net/wireless/ath/wil6210/txrx_edma.c b/drivers/net/wireless/ath/wil6210/txrx_edma.c new file mode 100644 index 000000000000..9773d400808d --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/txrx_edma.c @@ -0,0 +1,719 @@ +/* + * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/etherdevice.h> +#include <linux/moduleparam.h> +#include <linux/prefetch.h> +#include <linux/types.h> +#include <linux/list.h> +#include <linux/ip.h> +#include <linux/ipv6.h> +#include "wil6210.h" +#include "txrx_edma.h" +#include "txrx.h" + +#define WIL_EDMA_MAX_DATA_OFFSET (2) + +static void wil_tx_desc_unmap_edma(struct device *dev, + struct wil_tx_enhanced_desc *d, + struct wil_ctx *ctx) +{ + dma_addr_t pa = wil_tx_desc_get_addr_edma(&d->dma); + u16 dmalen = le16_to_cpu(d->dma.length); + + switch (ctx->mapped_as) { + case wil_mapped_as_single: + dma_unmap_single(dev, pa, dmalen, DMA_TO_DEVICE); + break; + case wil_mapped_as_page: + dma_unmap_page(dev, pa, dmalen, DMA_TO_DEVICE); + break; + default: + break; + } +} + +static int wil_find_free_sring(struct wil6210_priv *wil) +{ + int i; + + for (i = 0; i < WIL6210_MAX_STATUS_RINGS; i++) { + if (!wil->srings[i].va) + return i; + } + + return -EINVAL; +} + +static void wil_sring_free(struct wil6210_priv *wil, + struct wil_status_ring *sring) +{ + struct device *dev = wil_to_dev(wil); + size_t sz; + + if (!sring || !sring->va) + return; + + sz = sring->elem_size * sring->size; + + wil_dbg_misc(wil, "status_ring_free, size(bytes)=%zu, 0x%p:%pad\n", + sz, sring->va, &sring->pa); + + dma_free_coherent(dev, sz, (void *)sring->va, sring->pa); + sring->pa = 0; + sring->va = NULL; +} + +static int wil_sring_alloc(struct wil6210_priv *wil, + struct wil_status_ring *sring) +{ + struct device *dev = wil_to_dev(wil); + size_t sz = sring->elem_size * sring->size; + + wil_dbg_misc(wil, "status_ring_alloc: size=%zu\n", sz); + + if (sz == 0) { + wil_err(wil, "Cannot allocate a zero size status ring\n"); + return -EINVAL; + } + + sring->swhead = 0; + + /* Status messages are allocated and initialized to 0. This is necessary + * since DR bit should be initialized to 0. + */ + sring->va = dma_zalloc_coherent(dev, sz, &sring->pa, GFP_KERNEL); + if (!sring->va) + return -ENOMEM; + + wil_dbg_misc(wil, "status_ring[%d] 0x%p:%pad\n", sring->size, sring->va, + &sring->pa); + + return 0; +} + +static int wil_tx_init_edma(struct wil6210_priv *wil) +{ + int ring_id = wil_find_free_sring(wil); + struct wil_status_ring *sring; + int rc; + u16 status_ring_size; + + if (wil->tx_status_ring_order < WIL_SRING_SIZE_ORDER_MIN || + wil->tx_status_ring_order > WIL_SRING_SIZE_ORDER_MAX) + wil->tx_status_ring_order = WIL_TX_SRING_SIZE_ORDER_DEFAULT; + + status_ring_size = 1 << wil->tx_status_ring_order; + + wil_dbg_misc(wil, "init TX sring: size=%u, ring_id=%u\n", + status_ring_size, ring_id); + + if (ring_id < 0) + return ring_id; + + /* Allocate Tx status ring. Tx descriptor rings will be + * allocated on WMI connect event + */ + sring = &wil->srings[ring_id]; + + sring->is_rx = false; + sring->size = status_ring_size; + sring->elem_size = sizeof(struct wil_ring_tx_status); + rc = wil_sring_alloc(wil, sring); + if (rc) + return rc; + + rc = wil_wmi_tx_sring_cfg(wil, ring_id); + if (rc) + goto out_free; + + sring->desc_rdy_pol = 1; + wil->tx_sring_idx = ring_id; + + return 0; +out_free: + wil_sring_free(wil, sring); + return rc; +} + +/** + * Allocate one skb for Rx descriptor RING + */ +static int wil_ring_alloc_skb_edma(struct wil6210_priv *wil, + struct wil_ring *ring, u32 i) +{ + struct device *dev = wil_to_dev(wil); + unsigned int sz = wil->rx_buf_len + ETH_HLEN + + WIL_EDMA_MAX_DATA_OFFSET; + dma_addr_t pa; + u16 buff_id; + struct list_head *active = &wil->rx_buff_mgmt.active; + struct list_head *free = &wil->rx_buff_mgmt.free; + struct wil_rx_buff *rx_buff; + struct wil_rx_buff *buff_arr = wil->rx_buff_mgmt.buff_arr; + struct sk_buff *skb; + struct wil_rx_enhanced_desc dd, *d = ⅆ + struct wil_rx_enhanced_desc *_d = (struct wil_rx_enhanced_desc *) + &ring->va[i].rx.enhanced; + + if (unlikely(list_empty(free))) { + wil->rx_buff_mgmt.free_list_empty_cnt++; + return -EAGAIN; + } + + skb = dev_alloc_skb(sz); + if (unlikely(!skb)) + return -ENOMEM; + + skb_put(skb, sz); + + pa = dma_map_single(dev, skb->data, skb->len, DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(dev, pa))) { + kfree_skb(skb); + return -ENOMEM; + } + + /* Get the buffer ID - the index of the rx buffer in the buff_arr */ + rx_buff = list_first_entry(free, struct wil_rx_buff, list); + buff_id = rx_buff->id; + + /* Move a buffer from the free list to the active list */ + list_move(&rx_buff->list, active); + + buff_arr[buff_id].skb = skb; + + wil_desc_set_addr_edma(&d->dma.addr, &d->dma.addr_high_high, pa); + d->dma.length = cpu_to_le16(sz); + d->mac.buff_id = cpu_to_le16(buff_id); + *_d = *d; + + /* Save the physical address in skb->cb for later use in dma_unmap */ + memcpy(skb->cb, &pa, sizeof(pa)); + + return 0; +} + +static int wil_rx_refill_edma(struct wil6210_priv *wil) +{ + struct wil_ring *ring = &wil->ring_rx; + u32 next_head; + int rc = 0; + u32 swtail = *ring->edma_rx_swtail.va; + + for (; next_head = wil_ring_next_head(ring), (next_head != swtail); + ring->swhead = next_head) { + rc = wil_ring_alloc_skb_edma(wil, ring, ring->swhead); + if (unlikely(rc)) { + if (rc == -EAGAIN) + wil_dbg_txrx(wil, "No free buffer ID found\n"); + else + wil_err_ratelimited(wil, + "Error %d in refill desc[%d]\n", + rc, ring->swhead); + break; + } + } + + /* make sure all writes to descriptors (shared memory) are done before + * committing them to HW + */ + wmb(); + + wil_w(wil, ring->hwtail, ring->swhead); + + return rc; +} + +static void wil_move_all_rx_buff_to_free_list(struct wil6210_priv *wil, + struct wil_ring *ring) +{ + struct device *dev = wil_to_dev(wil); + u32 next_tail; + u32 swhead = (ring->swhead + 1) % ring->size; + dma_addr_t pa; + u16 dmalen; + + fo |