Merge branch 'master'

86 files changed, 12449 insertions, 5481 deletions

diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 455ba915ede7..7488ee7f7caf 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -602,7 +602,7 @@ MODULE_DEVICE_TABLE(pci, vortex_pci_tbl);
    First the windows.  There are eight register windows, with the command
    and status registers available in each.
    */
-#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
+#define EL3WINDOW(win_num) iowrite16(SelectWindow + (win_num), ioaddr + EL3_CMD)
 #define EL3_CMD 0x0e
 #define EL3_STATUS 0x0e
 
@@ -776,7 +776,8 @@ struct vortex_private {
 
 	/* PCI configuration space information. */
 	struct device *gendev;
-	char __iomem *cb_fn_base;		/* CardBus function status addr space. */
+	void __iomem *ioaddr;			/* IO address space */
+	void __iomem *cb_fn_base;		/* CardBus function status addr space. */
 
 	/* Some values here only for performance evaluation and path-coverage */
 	int rx_nocopy, rx_copy, queued_packet, rx_csumhits;
@@ -869,12 +870,12 @@ static struct {
 /* number of ETHTOOL_GSTATS u64's */
 #define VORTEX_NUM_STATS     3
 
-static int vortex_probe1(struct device *gendev, long ioaddr, int irq,
+static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
 				   int chip_idx, int card_idx);
 static void vortex_up(struct net_device *dev);
 static void vortex_down(struct net_device *dev, int final);
 static int vortex_open(struct net_device *dev);
-static void mdio_sync(long ioaddr, int bits);
+static void mdio_sync(void __iomem *ioaddr, int bits);
 static int mdio_read(struct net_device *dev, int phy_id, int location);
 static void mdio_write(struct net_device *vp, int phy_id, int location, int value);
 static void vortex_timer(unsigned long arg);
@@ -887,7 +888,7 @@ static irqreturn_t vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 static irqreturn_t boomerang_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 static int vortex_close(struct net_device *dev);
 static void dump_tx_ring(struct net_device *dev);
-static void update_stats(long ioaddr, struct net_device *dev);
+static void update_stats(void __iomem *ioaddr, struct net_device *dev);
 static struct net_device_stats *vortex_get_stats(struct net_device *dev);
 static void set_rx_mode(struct net_device *dev);
 #ifdef CONFIG_PCI
@@ -902,14 +903,16 @@ static void set_8021q_mode(struct net_device *dev, int enable);
 /* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
 /* Option count limit only -- unlimited interfaces are supported. */
 #define MAX_UNITS 8
-static int options[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1,};
-static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static int hw_checksums[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static int flow_ctrl[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static int enable_wol[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int options[MAX_UNITS] = { [0 ... MAX_UNITS-1] = -1 };
+static int full_duplex[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int hw_checksums[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int flow_ctrl[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int enable_wol[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int use_mmio[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
 static int global_options = -1;
 static int global_full_duplex = -1;
 static int global_enable_wol = -1;
+static int global_use_mmio = -1;
 
 /* #define dev_alloc_skb dev_alloc_skb_debug */
 
@@ -934,21 +937,25 @@ module_param(compaq_ioaddr, int, 0);
 module_param(compaq_irq, int, 0);
 module_param(compaq_device_id, int, 0);
 module_param(watchdog, int, 0);
+module_param(global_use_mmio, int, 0);
+module_param_array(use_mmio, int, NULL, 0);
 MODULE_PARM_DESC(debug, "3c59x debug level (0-6)");
 MODULE_PARM_DESC(options, "3c59x: Bits 0-3: media type, bit 4: bus mastering, bit 9: full duplex");
 MODULE_PARM_DESC(global_options, "3c59x: same as options, but applies to all NICs if options is unset");
 MODULE_PARM_DESC(full_duplex, "3c59x full duplex setting(s) (1)");
-MODULE_PARM_DESC(global_full_duplex, "3c59x: same as full_duplex, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(global_full_duplex, "3c59x: same as full_duplex, but applies to all NICs if full_duplex is unset");
 MODULE_PARM_DESC(hw_checksums, "3c59x Hardware checksum checking by adapter(s) (0-1)");
 MODULE_PARM_DESC(flow_ctrl, "3c59x 802.3x flow control usage (PAUSE only) (0-1)");
 MODULE_PARM_DESC(enable_wol, "3c59x: Turn on Wake-on-LAN for adapter(s) (0-1)");
-MODULE_PARM_DESC(global_enable_wol, "3c59x: same as enable_wol, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(global_enable_wol, "3c59x: same as enable_wol, but applies to all NICs if enable_wol is unset");
 MODULE_PARM_DESC(rx_copybreak, "3c59x copy breakpoint for copy-only-tiny-frames");
 MODULE_PARM_DESC(max_interrupt_work, "3c59x maximum events handled per interrupt");
 MODULE_PARM_DESC(compaq_ioaddr, "3c59x PCI I/O base address (Compaq BIOS problem workaround)");
 MODULE_PARM_DESC(compaq_irq, "3c59x PCI IRQ number (Compaq BIOS problem workaround)");
 MODULE_PARM_DESC(compaq_device_id, "3c59x PCI device ID (Compaq BIOS problem workaround)");
 MODULE_PARM_DESC(watchdog, "3c59x transmit timeout in milliseconds");
+MODULE_PARM_DESC(global_use_mmio, "3c59x: same as use_mmio, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(use_mmio, "3c59x: use memory-mapped PCI I/O resource (0-1)");
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void poll_vortex(struct net_device *dev)
@@ -1029,18 +1036,19 @@ static struct eisa_driver vortex_eisa_driver = {
 
 static int vortex_eisa_probe (struct device *device)
 {
-	long ioaddr;
+	void __iomem *ioaddr;
 	struct eisa_device *edev;
 
 	edev = to_eisa_device (device);
-	ioaddr = edev->base_addr;
 
-	if (!request_region(ioaddr, VORTEX_TOTAL_SIZE, DRV_NAME))
+	if (!request_region(edev->base_addr, VORTEX_TOTAL_SIZE, DRV_NAME))
 		return -EBUSY;
 
-	if (vortex_probe1(device, ioaddr, inw(ioaddr + 0xC88) >> 12,
+	ioaddr = ioport_map(edev->base_addr, VORTEX_TOTAL_SIZE);
+
+	if (vortex_probe1(device, ioaddr, ioread16(ioaddr + 0xC88) >> 12,
 					  edev->id.driver_data, vortex_cards_found)) {
-		release_region (ioaddr, VORTEX_TOTAL_SIZE);
+		release_region (edev->base_addr, VORTEX_TOTAL_SIZE);
 		return -ENODEV;
 	}
 
@@ -1054,7 +1062,7 @@ static int vortex_eisa_remove (struct device *device)
 	struct eisa_device *edev;
 	struct net_device *dev;
 	struct vortex_private *vp;
-	long ioaddr;
+	void __iomem *ioaddr;
 
 	edev = to_eisa_device (device);
 	dev = eisa_get_drvdata (edev);
@@ -1065,11 +1073,11 @@ static int vortex_eisa_remove (struct device *device)
 	}
 
 	vp = netdev_priv(dev);
-	ioaddr = dev->base_addr;
+	ioaddr = vp->ioaddr;
 	
 	unregister_netdev (dev);
-	outw (TotalReset|0x14, ioaddr + EL3_CMD);
-	release_region (ioaddr, VORTEX_TOTAL_SIZE);
+	iowrite16 (TotalReset|0x14, ioaddr + EL3_CMD);
+	release_region (dev->base_addr, VORTEX_TOTAL_SIZE);
 
 	free_netdev (dev);
 	return 0;
@@ -1096,8 +1104,8 @@ static int __init vortex_eisa_init (void)
 	
 	/* Special code to work-around the Compaq PCI BIOS32 problem. */
 	if (compaq_ioaddr) {
-		vortex_probe1(NULL, compaq_ioaddr, compaq_irq,
-					  compaq_device_id, vortex_cards_found++);
+		vortex_probe1(NULL, ioport_map(compaq_ioaddr, VORTEX_TOTAL_SIZE),
+			      compaq_irq, compaq_device_id, vortex_cards_found++);
 	}
 
 	return vortex_cards_found - orig_cards_found + eisa_found;
@@ -1107,15 +1115,32 @@ static int __init vortex_eisa_init (void)
 static int __devinit vortex_init_one (struct pci_dev *pdev,
 				      const struct pci_device_id *ent)
 {
-	int rc;
+	int rc, unit, pci_bar;
+	struct vortex_chip_info *vci;
+	void __iomem *ioaddr;
 
 	/* wake up and enable device */		
 	rc = pci_enable_device (pdev);
 	if (rc < 0)
 		goto out;
 
-	rc = vortex_probe1 (&pdev->dev, pci_resource_start (pdev, 0),
-						pdev->irq, ent->driver_data, vortex_cards_found);
+	unit = vortex_cards_found;
+
+	if (global_use_mmio < 0 && (unit >= MAX_UNITS || use_mmio[unit] < 0)) {
+		/* Determine the default if the user didn't override us */
+		vci = &vortex_info_tbl[ent->driver_data];
+		pci_bar = vci->drv_flags & (IS_CYCLONE | IS_TORNADO) ? 1 : 0;
+	} else if (unit < MAX_UNITS && use_mmio[unit] >= 0)
+		pci_bar = use_mmio[unit] ? 1 : 0;
+	else
+		pci_bar = global_use_mmio ? 1 : 0;
+
+	ioaddr = pci_iomap(pdev, pci_bar, 0);
+	if (!ioaddr) /* If mapping fails, fall-back to BAR 0... */
+		ioaddr = pci_iomap(pdev, 0, 0);
+
+	rc = vortex_probe1(&pdev->dev, ioaddr, pdev->irq,
+			   ent->driver_data, unit);
 	if (rc < 0) {
 		pci_disable_device (pdev);
 		goto out;
@@ -1134,7 +1159,7 @@ out:
  * NOTE: pdev can be NULL, for the case of a Compaq device
  */
 static int __devinit vortex_probe1(struct device *gendev,
-				   long ioaddr, int irq,
+				   void __iomem *ioaddr, int irq,
 				   int chip_idx, int card_idx)
 {
 	struct vortex_private *vp;
@@ -1202,15 +1227,16 @@ static int __devinit vortex_probe1(struct device *gendev,
 	if (print_info)
 		printk (KERN_INFO "See Documentation/networking/vortex.txt\n");
 
-	printk(KERN_INFO "%s: 3Com %s %s at 0x%lx. Vers " DRV_VERSION "\n",
+	printk(KERN_INFO "%s: 3Com %s %s at %p. Vers " DRV_VERSION "\n",
 	       print_name,
 	       pdev ? "PCI" : "EISA",
 	       vci->name,
 	       ioaddr);
 
-	dev->base_addr = ioaddr;
+	dev->base_addr = (unsigned long)ioaddr;
 	dev->irq = irq;
 	dev->mtu = mtu;
+	vp->ioaddr = ioaddr;
 	vp->large_frames = mtu > 1500;
 	vp->drv_flags = vci->drv_flags;
 	vp->has_nway = (vci->drv_flags & HAS_NWAY) ? 1 : 0;
@@ -1226,7 +1252,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 	if (pdev) {
 		/* EISA resources already marked, so only PCI needs to do this here */
 		/* Ignore return value, because Cardbus drivers already allocate for us */
-		if (request_region(ioaddr, vci->io_size, print_name) != NULL)
+		if (request_region(dev->base_addr, vci->io_size, print_name) != NULL)
 			vp->must_free_region = 1;
 
 		/* enable bus-mastering if necessary */		
@@ -1316,14 +1342,14 @@ static int __devinit vortex_probe1(struct device *gendev,
 
 		for (i = 0; i < 0x40; i++) {
 			int timer;
-			outw(base + i, ioaddr + Wn0EepromCmd);
+			iowrite16(base + i, ioaddr + Wn0EepromCmd);
 			/* Pause for at least 162 us. for the read to take place. */
 			for (timer = 10; timer >= 0; timer--) {
 				udelay(162);
-				if ((inw(ioaddr + Wn0EepromCmd) & 0x8000) == 0)
+				if ((ioread16(ioaddr + Wn0EepromCmd) & 0x8000) == 0)
 					break;
 			}
-			eeprom[i] = inw(ioaddr + Wn0EepromData);
+			eeprom[i] = ioread16(ioaddr + Wn0EepromData);
 		}
 	}
 	for (i = 0; i < 0x18; i++)
@@ -1338,6 +1364,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 		printk(" ***INVALID CHECKSUM %4.4x*** ", checksum);
 	for (i = 0; i < 3; i++)
 		((u16 *)dev->dev_addr)[i] = htons(eeprom[i + 10]);
+	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 	if (print_info) {
 		for (i = 0; i < 6; i++)
 			printk("%c%2.2x", i ? ':' : ' ', dev->dev_addr[i]);
@@ -1351,7 +1378,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 	}
 	EL3WINDOW(2);
 	for (i = 0; i < 6; i++)
-		outb(dev->dev_addr[i], ioaddr + i);
+		iowrite8(dev->dev_addr[i], ioaddr + i);
 
 #ifdef __sparc__
 	if (print_info)
@@ -1366,7 +1393,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 #endif
 
 	EL3WINDOW(4);
-	step = (inb(ioaddr + Wn4_NetDiag) & 0x1e) >> 1;
+	step = (ioread8(ioaddr + Wn4_NetDiag) & 0x1e) >> 1;
 	if (print_info) {
 		printk(KERN_INFO "  product code %02x%02x rev %02x.%d date %02d-"
 			"%02d-%02d\n", eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14],
@@ -1375,31 +1402,30 @@ static int __devinit vortex_probe1(struct device *gendev,
 
 
 	if (pdev && vci->drv_flags & HAS_CB_FNS) {
-		unsigned long fn_st_addr;			/* Cardbus function status space */
 		unsigned short n;
 
-		fn_st_addr = pci_resource_start (pdev, 2);
-		if (fn_st_addr) {
-			vp->cb_fn_base = ioremap(fn_st_addr, 128);
+		vp->cb_fn_base = pci_iomap(pdev, 2, 0);
+		if (!vp->cb_fn_base) {
 			retval = -ENOMEM;
-			if (!vp->cb_fn_base)
-				goto free_ring;
+			goto free_ring;
 		}
+
 		if (print_info) {
 			printk(KERN_INFO "%s: CardBus functions mapped %8.8lx->%p\n",
-				print_name, fn_st_addr, vp->cb_fn_base);
+				print_name, pci_resource_start(pdev, 2),
+				vp->cb_fn_base);
 		}
 		EL3WINDOW(2);
 
-		n = inw(ioaddr + Wn2_ResetOptions) & ~0x4010;
+		n = ioread16(ioaddr + Wn2_ResetOptions) & ~0x4010;
 		if (vp->drv_flags & INVERT_LED_PWR)
 			n |= 0x10;
 		if (vp->drv_flags & INVERT_MII_PWR)
 			n |= 0x4000;
-		outw(n, ioaddr + Wn2_ResetOptions);
+		iowrite16(n, ioaddr + Wn2_ResetOptions);
 		if (vp->drv_flags & WNO_XCVR_PWR) {
 			EL3WINDOW(0);
-			outw(0x0800, ioaddr);
+			iowrite16(0x0800, ioaddr);
 		}
 	}
 
@@ -1418,13 +1444,13 @@ static int __devinit vortex_probe1(struct device *gendev,
 		static const char * ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
 		unsigned int config;
 		EL3WINDOW(3);
-		vp->available_media = inw(ioaddr + Wn3_Options);
+		vp->available_media = ioread16(ioaddr + Wn3_Options);
 		if ((vp->available_media & 0xff) == 0)		/* Broken 3c916 */
 			vp->available_media = 0x40;
-		config = inl(ioaddr + Wn3_Config);
+		config = ioread32(ioaddr + Wn3_Config);
 		if (print_info) {
 			printk(KERN_DEBUG "  Internal config register is %4.4x, "
-				   "transceivers %#x.\n", config, inw(ioaddr + Wn3_Options));
+				   "transceivers %#x.\n", config, ioread16(ioaddr + Wn3_Options));
 			printk(KERN_INFO "  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
 				   8 << RAM_SIZE(config),
 				   RAM_WIDTH(config) ? "word" : "byte",
@@ -1455,7 +1481,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 		if (vp->drv_flags & EXTRA_PREAMBLE)
 			mii_preamble_required++;
 		mdio_sync(ioaddr, 32);
-		mdio_read(dev, 24, 1);
+		mdio_read(dev, 24, MII_BMSR);
 		for (phy = 0; phy <